|
|
|
|
$27.99
Kimpex OEM-Style CDI Box 01-143-40
Manufacturer: Kimpex
Dennis Kirk Part #: 42414
Kimpex OEM-Style CDI Box: Manufacturer part # 01-143-40 - Pre-tested at factory to match OEM specifications. All boxes mount in same location with original hardware. Adapter plate included for some models with four-bolt mounting. NOTE: There is no warranty on electrical parts. Our CDI boxes are tested twice to ensure quality before they are packaged. Before installing a CDI box, check all ignition components and connections to ensure they are within tolerances. If some components are out of spec, they should be replaced as they can cause premature failure. We strive to give our customers the finest quality replacement ignition parts at competitive prices. Packages are skin-packed so all the components are visible before opening; and the part is not returnable after opening. CDI boxes must be replaced only by experienced mechanics with the proper test equipment and familiarity with the electronic ignition system being repaired. Improper replacement or replacement without first testing the rest of the ignition system may damage the new CDI box.. 01-143-40
More than 10 on hand
More Info/Options for Kimpex OEM-Style CDI Box 01-143-40
40 54
|
|
|
|
$50.99
Stud Boy Super Stock Carbide Wear Rods CAT-R2076-40
Manufacturer: Stud Boy
Dennis Kirk Part #: 031315
Stud Boy Super Stock Carbide Wear Rods: Manufacturer part # CAT-R2076-40 - Large 1/2" diameter host bar for long life and great handling. Front and rear carbide pads to increase durability. Has four inches of 90° control carbide. Great for sleds without studs or conservatively studded. Angle cut at rear of bar to ease trailer unloading. Easy installation. , Some models require drilling extra holes in skis to mount carbides.Dennis Kirk recommends removing any paint from the studs before use by wire brushing. , Fits those models with a big lug, or Aggressive Wave track.. CAT-R2076-40
3 on hand
More Info/Options for Stud Boy Super Stock Carbide Wear Rods CAT-R2076-40
40 54
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$6.50
Drag Specialties 10W-40 Motorcycle Oil 36010044
Manufacturer: Drag Specialties
Dennis Kirk Part #: 304717
Drag Specialties 10W-40 Motorcycle Oil: Manufacturer part # 36010044 - Formulated for V-Twin engines when ambient temperature is between 10 F and 50 F. Gives engine outstanding protection during cold starting. Features special additives which provide excellent wear protection and durability while guarding against sludge buildup and oil breakdown. Meets all Harley-Davidson warranty performance criteria and does not void new vehicle warranties. Exceeds API CI-4/SL service rating. Available in a quart bottle.. 36010044
More than 10 on hand
More Info/Options for Drag Specialties 10W-40 Motorcycle Oil 36010044
40 54
|
|
|
|
$424.95
Hard Krome 3 1/2 in. Drag Double D Slip-Ons 40-4030
Manufacturer: Hard Krome
Dennis Kirk Part #: 446445
Hard Krome 3 1/2 in. Drag Double D Slip-Ons: Manufacturer part # 40-4030 - The first double wall 3 1/2 in. slip-on. Replace your stock mufflers and bolt on in minutes. Doublewall construction and slash cut rear pipe. 2-into-2 right side exit slip-ons. Polished chrome finish. Baffles are removable. , , Included Items: , (2) Slashcut Mufflers with Removable Baffles, (1) 12-3/ 4 in. Black Mounting Bracket, (1) T-Bolt Clamp, (4) 3/8 in. Lock Washers, (4) 3/8 in. Flat Washers, (4) 3/8 in. Square Nuts. NOTE: This has one double wall headpipe. Not for 2004-06 California versions of this motorcycle . Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 40-4030
1 on hand
More Info/Options for Hard Krome 3 1/2 in. Drag Double D Slip-Ons 40-4030
40 54
|
|
|
|
$424.95
Hard Krome Double D Drag Slip-Ons 40-3350
Manufacturer: Hard Krome
Dennis Kirk Part #: 449385
Hard Krome Double D Drag Slip-Ons: Manufacturer part # 40-3350 - These slip-ons are the same diameter as your original head pipe, so they bolt on in minutes. Double wall construction, slash-cut rear pipe and 1 3/4 in. inside pipe diameter. 2-into-2 right side exit slip-ons. Polished chrome finish. Baffles are removable. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 40-3350
2 on hand
More Info/Options for Hard Krome Double D Drag Slip-Ons 40-3350
40 54
|
|
|
|
$379.99
Roadhouse Fishtail Moto Classic Slip-On Mufflers 54-350
Manufacturer: Roadhouse
Dennis Kirk Part #: 4401724
Roadhouse Fishtail Moto Classic Slip-On Mufflers: Manufacturer part # 54-350 - New Moto Classic slip-ons replace the older-style one-piece mufflers. Larger, 3 1/2 in. diameter muffler canister produces a deep, meaty rumble. Shroud-type front end of the muffler produces a clean line and hides any unsightly blueing that may occur at the junction. Also feature removable baffles and interchangeable tips. Beautifully polished and chrome plated. , , Included Items: , (2) Mufflers, (2) Exhaust Clamps, (2) 10mm Nuts, (2) 10mm Flat Washers, (1) Instructions, , Tips For Moto Classic Mufflers Tapered - part no. 449707 Slash - part no. 449708 Shark fin - part no. 449709 Cadillac - part no. 4400104, , Slash-cut tips can be rotated for a variety of different looks Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 54-350
Expected Soon
More Info/Options for Roadhouse Fishtail Moto Classic Slip-On Mufflers 54-350
40 54
|
|
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
