4 Super

$7.25 Bel Ray Super Dot 4 Brake Fluid 9773
Manufacturer: Bel Ray
Dennis Kirk Part #: 301515
Bel Ray Super Dot 4 Brake Fluid: Manufacturer part # 9773 - Resists vapor lock with high boiling point. Helps maintain consistent, strong feel at lever during hard stops. 12 oz. bottle.. 9773
More than 10 on hand

More Info/Options for Bel Ray Super Dot 4 Brake Fluid 9773

4 Super

$79.99 V-Factor Velocity Stack for 4 in. S and S Super E and G Carb 84102
Manufacturer: V-Factor
Dennis Kirk Part #: 182627
V-Factor Velocity Stack for 4 in. S and S Super E and G Carb : Manufacturer part # 84102 - CNC-machined from 6061 T-6 billet aluminum. Include mounting hardware. NOTE: Do not include an air filter element or a carburetor support and must be used accordingly. 84102
3 on hand

More Info/Options for V-Factor Velocity Stack for 4 in. S and S Super E and G Carb 84102

4 Super

$10.99 Woodys Track Cutter 1/4 in. DRIL-1/4
Manufacturer: Woodys
Dennis Kirk Part #: 28491
Woodys Track Cutter 1/4 in.: Manufacturer part # DRIL-1/4 - Stud pattern drilling made quick and easy. Use for all types of studs; cuts a fabulous clean hole.. DRIL-1/4
More than 10 on hand

More Info/Options for Woodys Track Cutter 1/4 in. DRIL-1/4

4 Super

$255.99 GMA Engineering 3/4" Satin Handlebar Master Cylinder Assembly GMAHMCSB3/4-9
Manufacturer: GMA Engineering
Dennis Kirk Part #: 573002
GMA Engineering 3/4" Satin Handlebar Master Cylinder Assembly: Manufacturer part # GMAHMCSB3/4-9 - CNC-machined. Accept factory rocker switches and buttons. For dual-disc applications. Clutch lever assembly (57-3102) and master cylinder sold separately. Made in the U.S.A.. , , NOTE: . For 5/8" bore single disc master cylinder assy, use part number 57-3107. For rebuild kit use 57-3360. For replacement lever use 57-3105. Must use custom throttle assembly. GMAHMCSB3/4-9
1 on hand

More Info/Options for GMA Engineering 3/4" Satin Handlebar Master Cylinder Assembly GMAHMCSB3/4-9

4 Super

CLEARANCE!
Was: $241.99
Now: $145.19
LA Choppers BFL2 Bar w/Chopper Rake, 4 in. Rise Super BFL Bars
Manufacturer: LA Choppers
Dennis Kirk Part #: 594701
LA Choppers BFL2 Bar w/Chopper Rake, 4 in. Rise: Manufacturer part # Super BFL Bars - Same distinct style as the original BFL bars but re-tooled and redesigned. 1 1/4 in. tubing tapers to 1 in. at end; accept stock-type grips and controls. Brake and clutch sides are dimpled and clearanced to accept wiring and master cylinder; drilled for internal wiring. Available for stock bikes or chopper rake front ends. All bars are 32 in. wide with 8 in. pullback.. Super BFL Bars
1 on hand

More Info/Options for LA Choppers BFL2 Bar w/Chopper Rake, 4 in. Rise Super BFL Bars

4 Super

$265.99 Carlini 1 1/4 in. Super Sweep Tee Bar SPORTSTER125
Manufacturer: Carlini
Dennis Kirk Part #: H59293
Carlini 1 1/4 in. Super Sweep Tee Bar: Manufacturer part # SPORTSTER125 - 2 1/2 in. more pullback than Clean Sweep bars give them a more-raked appearance. They're not only drilled for internal wiring, they come with pull-through string to make wire routing easy. Chrome plated; welds are smoothed and polished by hand to ensure the best possible finish. High-quality packaging keeps bars in prime condition during shipping. New handlebar busings recommended. , , NOTE: 4 3/4 in. and 7 in. rise bars will not clear tank-mounted gauges; custom gauge mounting required. ., , NOTE: Will not fit Touring 08-09 models. SPORTSTER125
5 on hand

More Info/Options for Carlini 1 1/4 in. Super Sweep Tee Bar SPORTSTER125

4 Super

$265.99 Carlini 1 1/4 in. Super Sweep Tee Bar SS1257
Manufacturer: Carlini
Dennis Kirk Part #: H59294
Carlini 1 1/4 in. Super Sweep Tee Bar: Manufacturer part # SS1257 - 2 1/2 in. more pullback than Clean Sweep bars give them a more-raked appearance. They're not only drilled for internal wiring, they come with pull-through string to make wire routing easy. Chrome plated; welds are smoothed and polished by hand to ensure the best possible finish. High-quality packaging keeps bars in prime condition during shipping. New handlebar busings recommended. , , NOTE: 4 3/4 in. and 7 in. rise bars will not clear tank-mounted gauges; custom gauge mounting required. ., , NOTE: Will not fit Touring 08-09 models. SS1257
1 on hand

More Info/Options for Carlini 1 1/4 in. Super Sweep Tee Bar SS1257

4 Super

$265.99 Carlini 1 1/4 in. Super Sweep Tee Bars SS1259
Manufacturer: Carlini
Dennis Kirk Part #: H59295
Carlini 1 1/4 in. Super Sweep Tee Bars: Manufacturer part # SS1259 - 2 1/2 in. more pullback than Clean Sweep bars give them a more-raked appearance. They're not only drilled for internal wiring, they come with pull-through string to make wire routing easy. Chrome plated; welds are smoothed and polished by hand to ensure the best possible finish. High-quality packaging keeps bars in prime condition during shipping. New handlebar busings recommended. , , NOTE: 4 3/4 in. and 7 in. rise bars will not clear tank-mounted gauges; custom gauge mounting required. ., , NOTE: Will not fit Touring 08-09 models. SS1259
1 on hand

More Info/Options for Carlini 1 1/4 in. Super Sweep Tee Bars SS1259

4 Super

$28.95 Sport Parts Inc. 4 in. Pivot Riser Block SM-08112-4
Manufacturer: Sport Parts Inc.
Dennis Kirk Part #: 593308
Sport Parts Inc. 4 in. Pivot Riser Block : Manufacturer part # SM-08112-4 - CNC-machined 6061 T-6 aluminum with black anodized finish. When combined with pivot adapter for riser blocks you get high strength and maximum adjustability. Pivot style adapter is sold separately from risers (order 59-3306) Throttle cable extension kit (sold separately) allows up to 10" of additional reach, Part No. 194404. SM-08112-4
6 on hand

More Info/Options for Sport Parts Inc. 4 in. Pivot Riser Block SM-08112-4

4 Super

$28.95 Sport Parts Inc. 4 in. Pivot Riser Block SM-08110-4
Manufacturer: Sport Parts Inc.
Dennis Kirk Part #: 593298
Sport Parts Inc. 4 in. Pivot Riser Block : Manufacturer part # SM-08110-4 - CNC-machined 6061 T-6 aluminum with black anodized finish. When combined with pivot adapter for riser blocks you get high strength and maximum adjustability. Pivot style adapter is sold separately from risers. Throttle cable extension kit (sold separately) allows up to 10" of additional reach, Part No. 194404, , ARCTIC CAT ZR/FIRECAT/SABERCAT MODELS 00-07 Must use adapter kit, Part No. 593296 YAMAHA MODELS 97-07 Must use adapter kit, Part No. 593295. SM-08110-4
7 on hand

More Info/Options for Sport Parts Inc. 4 in. Pivot Riser Block SM-08110-4

4 Super

$29.95 Sport Parts Inc. 4 in. Handlebar Riser SM-08078-4
Manufacturer: Sport Parts Inc.
Dennis Kirk Part #: 593293
Sport Parts Inc. 4 in. Handlebar Riser : Manufacturer part # SM-08078-4 - Black extruded 6061 T-6 aluminum risers. Include riser, four nuts and four bolts. Throttle cable extension kit allows up to 10 in. of additional reach - sold separately (order 19-4404).. SM-08078-4
3 on hand

More Info/Options for Sport Parts Inc. 4 in. Handlebar Riser SM-08078-4

4 Super

$149.95 Drag Specialties 1 1/4 in. Super Radius Handlebar for Yamaha p595038
Manufacturer: Drag Specialties
Dennis Kirk Part #: 595038
Drag Specialties 1 1/4 in. Super Radius Handlebar for Yamaha: Manufacturer part # p595038 - Brilliantly show-chromed handlebars. Accept standard 1" controls. The 1 1/4" handlebars feature a smooth transition from the 1 1/4" bar area to the 1" control area, no welds. Made in the U.S.A.. , , Risers accept 1/2"-13 thread pitch.. p595038
2 on hand

More Info/Options for Drag Specialties 1 1/4 in. Super Radius Handlebar for Yamaha p595038

4 Super

4 Super