4 Cell

$17.99 PowerMadd Bar Bag Deluxe PM13602
Manufacturer: PowerMadd
Dennis Kirk Part #: 506013
PowerMadd Bar Bag Deluxe: Manufacturer part # PM13602 - Your favorite hat fits in the large pocket; two extra pockets hold your wallet, keys, registration, GPS, tools, etc.. Both pieces have zipper closures, One measures 8-1/2" L x 1" W X 4-1/2", The other measures 7-3/4" L X 3"(top) to 2-1/2" (bottom). Fits snowmobiles, PWC, ATV, motorcycles, etc.; easy wrap-over-bar installation.. PM13602
6 on hand

More Info/Options for PowerMadd Bar Bag Deluxe PM13602

4 Cell

$18.99 PowerMadd ToolCaddy Tool Bag PM13610
Manufacturer: PowerMadd
Dennis Kirk Part #: 504666
PowerMadd ToolCaddy Tool Bag : Manufacturer part # PM13610 - Water-resistant, serious-sized tool and supply bag rolls up and secures snugly, providing compact and convenient storage. Made from super-tough 1000 denier nylon that resists punctures and rips; closes with adjustable hook-and-loop system. Stow small items in the attached 5 in. x 9 in. zippered pouch. Six tool slots, hook and loop closure strap. Tools not included. , , Dimensions:, Open: 14 1/2 in. x 18 in., Closed: 9 in. x 5 in... PM13610
More than 10 on hand

More Info/Options for PowerMadd ToolCaddy Tool Bag PM13610

4 Cell

$10.99 Woodys Track Cutter 1/4 in. DRIL-1/4
Manufacturer: Woodys
Dennis Kirk Part #: 28491
Woodys Track Cutter 1/4 in.: Manufacturer part # DRIL-1/4 - Stud pattern drilling made quick and easy. Use for all types of studs; cuts a fabulous clean hole.. DRIL-1/4
More than 10 on hand

More Info/Options for Woodys Track Cutter 1/4 in. DRIL-1/4

4 Cell

$255.99 GMA Engineering 3/4" Satin Handlebar Master Cylinder Assembly GMAHMCSB3/4-9
Manufacturer: GMA Engineering
Dennis Kirk Part #: 573002
GMA Engineering 3/4" Satin Handlebar Master Cylinder Assembly: Manufacturer part # GMAHMCSB3/4-9 - CNC-machined. Accept factory rocker switches and buttons. For dual-disc applications. Clutch lever assembly (57-3102) and master cylinder sold separately. Made in the U.S.A.. , , NOTE: . For 5/8" bore single disc master cylinder assy, use part number 57-3107. For rebuild kit use 57-3360. For replacement lever use 57-3105. Must use custom throttle assembly. GMAHMCSB3/4-9
1 on hand

More Info/Options for GMA Engineering 3/4" Satin Handlebar Master Cylinder Assembly GMAHMCSB3/4-9

4 Cell

$28.95 Sport Parts Inc. 4 in. Pivot Riser Block SM-08112-4
Manufacturer: Sport Parts Inc.
Dennis Kirk Part #: 593308
Sport Parts Inc. 4 in. Pivot Riser Block : Manufacturer part # SM-08112-4 - CNC-machined 6061 T-6 aluminum with black anodized finish. When combined with pivot adapter for riser blocks you get high strength and maximum adjustability. Pivot style adapter is sold separately from risers (order 59-3306) Throttle cable extension kit (sold separately) allows up to 10" of additional reach, Part No. 194404. SM-08112-4
6 on hand

More Info/Options for Sport Parts Inc. 4 in. Pivot Riser Block SM-08112-4

4 Cell

$28.95 Sport Parts Inc. 4 in. Pivot Riser Block SM-08110-4
Manufacturer: Sport Parts Inc.
Dennis Kirk Part #: 593298
Sport Parts Inc. 4 in. Pivot Riser Block : Manufacturer part # SM-08110-4 - CNC-machined 6061 T-6 aluminum with black anodized finish. When combined with pivot adapter for riser blocks you get high strength and maximum adjustability. Pivot style adapter is sold separately from risers. Throttle cable extension kit (sold separately) allows up to 10" of additional reach, Part No. 194404, , ARCTIC CAT ZR/FIRECAT/SABERCAT MODELS 00-07 Must use adapter kit, Part No. 593296 YAMAHA MODELS 97-07 Must use adapter kit, Part No. 593295. SM-08110-4
7 on hand

More Info/Options for Sport Parts Inc. 4 in. Pivot Riser Block SM-08110-4

4 Cell

$29.95 Sport Parts Inc. 4 in. Handlebar Riser SM-08078-4
Manufacturer: Sport Parts Inc.
Dennis Kirk Part #: 593293
Sport Parts Inc. 4 in. Handlebar Riser : Manufacturer part # SM-08078-4 - Black extruded 6061 T-6 aluminum risers. Include riser, four nuts and four bolts. Throttle cable extension kit allows up to 10 in. of additional reach - sold separately (order 19-4404).. SM-08078-4
3 on hand

More Info/Options for Sport Parts Inc. 4 in. Handlebar Riser SM-08078-4

4 Cell

$10.99 Jet Logic 4 ft. Bungee Dock Line AHDL-4
Manufacturer: Jet Logic
Dennis Kirk Part #: 406789
Jet Logic 4 ft. Bungee Dock Line: Manufacturer part # AHDL-4 - Bungee dock line keeps your watercraft snugly secured against the dock at all times. Dock line is kept afloat by two foam floats that also keep the craft from coming into contact with the dock. Looped ends for no-fuss docking. Rated for craft weighing up to 4,000 lbs.; 2,150 lbs. tensile strength.. AHDL-4
10 on hand

More Info/Options for Jet Logic 4 ft. Bungee Dock Line AHDL-4

4 Cell

$141.99 HMK Highmark 4 Highmark 4
Manufacturer: HMK
Dennis Kirk Part #: 340927910
HMK Highmark 4: Manufacturer part # Highmark 4 - Boot is 12" tall and features a synthetic leather and textile shell with full-length padded backstay. Medial and lateral wear bars provide abrasion resistance. Ergonomic comfort cuff relieves pressure on calf. High-grip rubber outsole with tunnel-grip pattern for superior traction. Zero-slip lining. Overlapping dual-density lace-up liner includes J pads for superior fit and heel hold. Molded eyelets for friction-free lacing along with a Neoprene over-the-tongue foot-dry gusset system. Easy-grab nylon webbing heel pull. Quick-dry removable molded EVA footbed features a shock-padded heel and molded arch support. Performance trail flex. Rated to -58°F/-50°C.. Highmark 4
3 on hand

More Info/Options for HMK Highmark 4 Highmark 4

4 Cell

$112.99 LA Choppers 1 1/2 in. Risers for 1 1/4 in. Handlebars 1 1/4
Manufacturer: LA Choppers
Dennis Kirk Part #: 595383
LA Choppers 1 1/2 in. Risers for 1 1/4 in. Handlebars: Manufacturer part # 1 1/4 - Fit LA Choppers handlebars or other handlebars with a 1 1/4" diameter clamping area. 1/2" -13 threads. Polished chrome finish. Sold in pairs.. 1 1/4
2 on hand

More Info/Options for LA Choppers 1 1/2 in. Risers for 1 1/4 in. Handlebars 1 1/4

4 Cell

$112.99 LA Choppers 1 1/4 in. Honda Handlebar Risers - 1.25 in. 1 1/4
Manufacturer: LA Choppers
Dennis Kirk Part #: 595384
LA Choppers 1 1/4 in. Honda Handlebar Risers - 1.25 in.: Manufacturer part # 1 1/4 - Allows you to install LA Choppers handlebars, or other handlebars with a 1 1/4" mounting section on your metric cruiser. Bright chrome finish. Honda risers have 7/16" -14 mounting studs, not for VTX models. 1 1/4
1 on hand

More Info/Options for LA Choppers 1 1/4 in. Honda Handlebar Risers - 1.25 in. 1 1/4

4 Cell

$112.99 LA Choppers 1 1/4 in. Yamaha Handlebar Risers - 1.25 in. 1 1/4
Manufacturer: LA Choppers
Dennis Kirk Part #: 595385
LA Choppers 1 1/4 in. Yamaha Handlebar Risers - 1.25 in. : Manufacturer part # 1 1/4 - Allows you to install LA Choppers handlebars, or other handlebars with a 1 1/4" mounting section on your metric cruiser. Bright chrome finish. Yamaha risers have M12x1.25 mounting studs and can also be used on all Honda VTX models and 05-07 Victory models. For Honda risers which have 7/16" -14 mounting stud and are not for VTX models, order DK part no. 595384. For Kawasaki risers which have M10x1.5 mounting studs and can also be used on 04 Victory models, order DK part no. 595386. Risers sold as a set.. 1 1/4
1 on hand

More Info/Options for LA Choppers 1 1/4 in. Yamaha Handlebar Risers - 1.25 in. 1 1/4

4 Cell

4 Cell