4 16

CLEARANCE!
Was: $519.99
Now: $389.99
Jardine 16 Series 4-2-1 Black Header W/Polished Aluminum Canister Complete Exhaust System 16-4501-03
Manufacturer: Jardine
Dennis Kirk Part #: 440409
Jardine 16 Series 4-2-1 Black Header W/Polished Aluminum Canister Complete Exhaust System: Manufacturer part # 16-4501-03 - High-performance looks and sound with a horsepower boost. Brilliantly polished aluminum canisters with stainless steel hardware. Fiberglass-packed, removable baffle canister(s). Retain all convenience features, including centerstand, oil filter and drain plug access. All single-muffler systems are right-side exit. Carburetor re-jetting may be desired for best performance, , Optional interchangeable tips available for customized look , Shark Fin 2-1/2" - Part No. 449703, Cadillac 2-1/2" - Part No. 449704, Slash 4" - Part No. 449702, Standard Replacement Tips 2-1/2" - Part No. 449705, ,. Optional quiet and performance cores also available , Quiet Core - Part No. 449686, Performance Core - Part No. 449688, ,. Manifold exhaust gaskets are not included , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product., , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 16-4501-03
1 on hand

More Info/Options for Jardine 16 Series 4-2-1 Black Header W/Polished Aluminum Canister Complete Exhaust System 16-4501-03

4 16

$6.99 NAMZ Custom Cycle Products Colored Hose Clamps for 1/4 in. and 5/16 in. Fuel Lines p183767
Manufacturer: NAMZ Custom Cycle Products
Dennis Kirk Part #: 183769
NAMZ Custom Cycle Products Colored Hose Clamps for 1/4 in. and 5/16 in. Fuel Lines: Manufacturer part # p183767 - Custom colors for use with braided copper and stainless steel hoses. Fit over most manufacturer's braided rubber hoses. Manufactured from brass and finished with a matte metallic powder-coat. Sold each(an average FXST or custom will use a minimum of two fuel line clamps and six oil line clamps). Made in the U.S.A... p183767
8 on hand

More Info/Options for NAMZ Custom Cycle Products Colored Hose Clamps for 1/4 in. and 5/16 in. Fuel Lines p183767

4 16

$210.95 Drag Specialties 16 in. Ape Hanger Flame 1 1/4 in. Tattoo Handlebar pH59153
Manufacturer: Drag Specialties
Dennis Kirk Part #: H59153
Drag Specialties 16 in. Ape Hanger Flame 1 1/4 in. Tattoo Handlebar: Manufacturer part # pH59153 - Designed for maximum comfort - these are the ultimate 1 1/4 in. diameter handlebars. Flame bars feature an engraved flame design on exposed sections. Work with standard controls; drilled for internal wires. Available with a show-chrome or gloss black finish. Springer-style bars work with the OEM Springer risers and handlebar clamps; have 4 3/ in. centered knurling for a smooth, finished look. Billet gauge mounts for T-bars are available separately to fit 86-09 and mini-style gauges. Thick, 1 1/4 in. risers are also available to complete the Buffalo look (accepts 1 in.. Buffalo handlebar clamps cover all of the center area that is sized down to 1 in. (not available for Springer models). Standard bars have 5 1/8 in. clamp area width. Springer bars have 6 3/4 in. clamp area width. T-bars have 3 1/2 in. center-to-center mount holes. Will not fit Touring models 08-09. Made in the U.S.A.. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883C/1200C models., , NOTE: OEM-style handlebar clamps are not designed for use with these handlebars., , NOTE: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter.. pH59153
2 on hand

More Info/Options for Drag Specialties 16 in. Ape Hanger Flame 1 1/4 in. Tattoo Handlebar pH59153

4 16

$10.99 Woodys Track Cutter 1/4 in. DRIL-1/4
Manufacturer: Woodys
Dennis Kirk Part #: 28491
Woodys Track Cutter 1/4 in.: Manufacturer part # DRIL-1/4 - Stud pattern drilling made quick and easy. Use for all types of studs; cuts a fabulous clean hole.. DRIL-1/4
More than 10 on hand

More Info/Options for Woodys Track Cutter 1/4 in. DRIL-1/4

4 16

$255.99 GMA Engineering 3/4" Satin Handlebar Master Cylinder Assembly GMAHMCSB3/4-9
Manufacturer: GMA Engineering
Dennis Kirk Part #: 573002
GMA Engineering 3/4" Satin Handlebar Master Cylinder Assembly: Manufacturer part # GMAHMCSB3/4-9 - CNC-machined. Accept factory rocker switches and buttons. For dual-disc applications. Clutch lever assembly (57-3102) and master cylinder sold separately. Made in the U.S.A.. , , NOTE: . For 5/8" bore single disc master cylinder assy, use part number 57-3107. For rebuild kit use 57-3360. For replacement lever use 57-3105. Must use custom throttle assembly. GMAHMCSB3/4-9
1 on hand

More Info/Options for GMA Engineering 3/4" Satin Handlebar Master Cylinder Assembly GMAHMCSB3/4-9

4 16

$29.99 JIMS 1/4 in. -5/16 in. Hose Repair Kit 1087-2
Manufacturer: JIMS
Dennis Kirk Part #: 282804
JIMS 1/4 in. -5/16 in. Hose Repair Kit: Manufacturer part # 1087-2 - Hose bared end is .3125 (5/16 in.). Threaded end is 12mm. Works with eight .250 in. or .3125 in. hose.. 1087-2
1 on hand

More Info/Options for JIMS 1/4 in. -5/16 in. Hose Repair Kit 1087-2

4 16

$28.95 Sport Parts Inc. 4 in. Pivot Riser Block SM-08112-4
Manufacturer: Sport Parts Inc.
Dennis Kirk Part #: 593308
Sport Parts Inc. 4 in. Pivot Riser Block : Manufacturer part # SM-08112-4 - CNC-machined 6061 T-6 aluminum with black anodized finish. When combined with pivot adapter for riser blocks you get high strength and maximum adjustability. Pivot style adapter is sold separately from risers (order 59-3306) Throttle cable extension kit (sold separately) allows up to 10" of additional reach, Part No. 194404. SM-08112-4
6 on hand

More Info/Options for Sport Parts Inc. 4 in. Pivot Riser Block SM-08112-4

4 16

$28.95 Sport Parts Inc. 4 in. Pivot Riser Block SM-08110-4
Manufacturer: Sport Parts Inc.
Dennis Kirk Part #: 593298
Sport Parts Inc. 4 in. Pivot Riser Block : Manufacturer part # SM-08110-4 - CNC-machined 6061 T-6 aluminum with black anodized finish. When combined with pivot adapter for riser blocks you get high strength and maximum adjustability. Pivot style adapter is sold separately from risers. Throttle cable extension kit (sold separately) allows up to 10" of additional reach, Part No. 194404, , ARCTIC CAT ZR/FIRECAT/SABERCAT MODELS 00-07 Must use adapter kit, Part No. 593296 YAMAHA MODELS 97-07 Must use adapter kit, Part No. 593295. SM-08110-4
7 on hand

More Info/Options for Sport Parts Inc. 4 in. Pivot Riser Block SM-08110-4

4 16

$29.95 Sport Parts Inc. 4 in. Handlebar Riser SM-08078-4
Manufacturer: Sport Parts Inc.
Dennis Kirk Part #: 593293
Sport Parts Inc. 4 in. Handlebar Riser : Manufacturer part # SM-08078-4 - Black extruded 6061 T-6 aluminum risers. Include riser, four nuts and four bolts. Throttle cable extension kit allows up to 10 in. of additional reach - sold separately (order 19-4404).. SM-08078-4
3 on hand

More Info/Options for Sport Parts Inc. 4 in. Handlebar Riser SM-08078-4

4 16

$9.95 Jetlyne Aluminum Grommet-3/4 in Thread 9/16 in. ID SBEC
Manufacturer: Jetlyne
Dennis Kirk Part #: 090157
Jetlyne Aluminum Grommet-3/4 in Thread 9/16 in. ID: Manufacturer part # SBEC - Much more durable than stock plastic grommets. Long-lasting anodized finish dresses up any watercraft. For early or late model Kawasaki jet skis and Yamahas.. SBEC
2 on hand

More Info/Options for Jetlyne Aluminum Grommet-3/4 in Thread 9/16 in. ID SBEC

4 16

$10.99 Jet Logic 4 ft. Bungee Dock Line AHDL-4
Manufacturer: Jet Logic
Dennis Kirk Part #: 406789
Jet Logic 4 ft. Bungee Dock Line: Manufacturer part # AHDL-4 - Bungee dock line keeps your watercraft snugly secured against the dock at all times. Dock line is kept afloat by two foam floats that also keep the craft from coming into contact with the dock. Looped ends for no-fuss docking. Rated for craft weighing up to 4,000 lbs.; 2,150 lbs. tensile strength.. AHDL-4
10 on hand

More Info/Options for Jet Logic 4 ft. Bungee Dock Line AHDL-4

4 16

$202.99 Arlen Ness 6 1/4 in. Wide Frontdragger Fender For Use With 16, 17 or 18 in. Wheels 06-181
Manufacturer: Arlen Ness
Dennis Kirk Part #: H39023
Arlen Ness 6 1/4 in. Wide Frontdragger Fender For Use With 16, 17 or 18 in. Wheels: Manufacturer part # 06-181 - A popular fiberglass fender design that is made to match Taildragger fenders. Made in the U.S.A.. Note: Fender must be prefitted before painting.. 06-181
1 on hand

More Info/Options for Arlen Ness 6 1/4 in. Wide Frontdragger Fender For Use With 16, 17 or 18 in. Wheels 06-181

4 16

4 16