|
|
CLOSEOUT!
Was: $119.50
Now: $71.70
Bergstrom Advantage 3 Triple Point Carbides 031861
Dennis Kirk Part #: 031861
Bergstrom Advantage 3 Triple Point Carbides 031861: Manufacturer part # TP12H06 - Most dramatic turning carbide in the history of snowmobiling. This outperform and outwears all other carbides; eliminates darting. The only design that actually benefits from the 10 degree tilt of the skies when cornering. Center carbide bears load when going straight; outside edges make contact when turning. Center carbide wears down to the same height as the two outside edges, generating 90 degree edges. Outside carbides with maintain an edge all the way down to the host bar, allowing you to turn on ice or pavement much longer; in effect they are self sharpening. Super-hard inserts are bonded to the host rod at critical pressure points to provide, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long-lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. ***DIMENSIONS Length x Diameter: 14 1/2 in. x 7/16 in. Stud Diameter x Length: 5/16 in. x 2 in. Number of Studs: 2 ***STUD CENTER MOUNTING DISTANCE FROM: Front to 1st: 2 1/8 in. 1st to 2nd : 7 7/8 in. 2nd to End : 4 1/2 in.. TP12H06
1 on Hand
More Info/Options for Bergstrom Advantage 3 Triple Point Carbides 031861
|
|
|
|
CLOSEOUT!
Was: $159.50
Now: $95.70
Bergstrom Advantage 3 Triple Point Carbides 031871
Dennis Kirk Part #: 031871
Bergstrom Advantage 3 Triple Point Carbides 031871: Manufacturer part # TP18H06 - Most dramatic turning carbide in the history of snowmobiling. This outperform and outwears all other carbides; eliminates darting. The only design that actually benefits from the 10 degree tilt of the skies when cornering. Center carbide bears load when going straight; outside edges make contact when turning. Center carbide wears down to the same height as the two outside edges, generating 90 degree edges. Outside carbides with maintain an edge all the way down to the host bar, allowing you to turn on ice or pavement much longer; in effect they are self sharpening. Super-hard inserts are bonded to the host rod at critical pressure points to provide, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long-lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. ***DIMENSIONS Length x Diameter: 14 1/2 in. x 7/16 in. Stud Diameter x Length: 5/16 in. x 2 in. Number of Studs: 2 ***STUD CENTER MOUNTING DISTANCE FROM: Front to 1st: 2 1/8 in. 1st to 2nd : 4 7/8 in. 2nd to End : 4 1/2 in.. TP18H06
2 on Hand
More Info/Options for Bergstrom Advantage 3 Triple Point Carbides 031871
|
|
|
|
CLOSEOUT!
Was: $199.50
Now: $119.70
Bergstrom Advantage 3 Triple Point Carbides 031880
Dennis Kirk Part #: 031880
Bergstrom Advantage 3 Triple Point Carbides 031880: Manufacturer part # TP24H06 - Most dramatic turning carbide in the history of snowmobiling. This outperform and outwears all other carbides; eliminates darting. The only design that actually benefits from the 10 degree tilt of the skies when cornering. Center carbide bears load when going straight; outside edges make contact when turning. Center carbide wears down to the same height as the two outside edges, generating 90 degree edges. Outside carbides with maintain an edge all the way down to the host bar, allowing you to turn on ice or pavement much longer; in effect they are self sharpening. Super-hard inserts are bonded to the host rod at critical pressure points to provide, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rod?s contact area gives you long-lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. ***DIMENSIONS Length x Diameter: 14 1/2 in. x 7/16 in. Stud Diameter x Length: 5/16 in. x 2 in. Number of Studs: 2 ***STUD CENTER MOUNTING DISTANCE FROM: Front to 1st: 2 1/8 in. 1st to 2nd : 7 7/8 in. 2nd to 3rd : 4 1/2 in.. TP24H06
2 on Hand
More Info/Options for Bergstrom Advantage 3 Triple Point Carbides 031880
|
|
|
|
CLOSEOUT!
Was: $119.50
Now: $71.70
Bergstrom Advantage 3 Triple Point Carbides 031864
Dennis Kirk Part #: 031864
Bergstrom Advantage 3 Triple Point Carbides 031864: Manufacturer part # TP12Q15 - Most dramatic turning carbide in the history of snowmobiling. This outperform and outwears all other carbides; eliminates darting. The only design that actually benefits from the 10 degree tilt of the skies when cornering. Center carbide bears load when going straight; outside edges make contact when turning. Center carbide wears down to the same height as the two outside edges, generating 90 degree edges. Outside carbides with maintain an edge all the way down to the host bar, allowing you to turn on ice or pavement much longer; in effect they are self sharpening. Super-hard inserts are bonded to the host rod at critical pressure points to provide, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long-lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. ***DIMENSIONS Length x Diameter: 14 1/2 in. x 7/16 in. Stud Diameter x Length: 5/16 in. x 2 in. Number of Studs: 2 ***STUD CENTER MOUNTING DISTANCE FROM: Front to 1st: 2 1/8 in. 1st to 2nd : 7 7/8 in. 2nd to End : 4 1/2 in.. TP12Q15
3 on Hand
More Info/Options for Bergstrom Advantage 3 Triple Point Carbides 031864
|
|
|
|
CLOSEOUT!
Was: $159.50
Now: $95.70
Bergstrom Advantage 3 Triple Point Carbides 031874
Dennis Kirk Part #: 031874
Bergstrom Advantage 3 Triple Point Carbides 031874: Manufacturer part # TP18Q15 - Most dramatic turning carbide in the history of snowmobiling. This outperform and outwears all other carbides; eliminates darting. The only design that actually benefits from the 10 degree tilt of the skies when cornering. Center carbide bears load when going straight; outside edges make contact when turning. Center carbide wears down to the same height as the two outside edges, generating 90 degree edges. Outside carbides with maintain an edge all the way down to the host bar, allowing you to turn on ice or pavement much longer; in effect they are self sharpening. Super-hard inserts are bonded to the host rod at critical pressure points to provide, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long-lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. ***DIMENSIONS Length x Diameter: 14 1/2 in. x 7/16 in. Stud Diameter x Length: 5/16 in. x 2 in. Number of Studs: 2 ***STUD CENTER MOUNTING DISTANCE FROM: Front to 1st: 2 1/8 in. 1st to 2nd : 4 7/8 in. 2nd to End : 4 1/2 in.. TP18Q15
4 on Hand
More Info/Options for Bergstrom Advantage 3 Triple Point Carbides 031874
|
|
|
|
CLOSEOUT!
Was: $199.50
Now: $119.70
Bergstrom Advantage 3 Triple Point Carbides 031883
Dennis Kirk Part #: 031883
Bergstrom Advantage 3 Triple Point Carbides 031883: Manufacturer part # TP24Q15 - Most dramatic turning carbide in the history of snowmobiling. This outperform and outwears all other carbides; eliminates darting. The only design that actually benefits from the 10 degree tilt of the skies when cornering. Center carbide bears load when going straight; outside edges make contact when turning. Center carbide wears down to the same height as the two outside edges, generating 90 degree edges. Outside carbides with maintain an edge all the way down to the host bar, allowing you to turn on ice or pavement much longer; in effect they are self sharpening. Super-hard inserts are bonded to the host rod at critical pressure points to provide, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rod?s contact area gives you long-lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. ***DIMENSIONS Length x Diameter: 14 1/2 in. x 7/16 in. Stud Diameter x Length: 5/16 in. x 2 in. Number of Studs: 2 ***STUD CENTER MOUNTING DISTANCE FROM: Front to 1st: 2 1/8 in. 1st to 2nd : 7 7/8 in. 2nd to 3rd : 4 1/2 in.. TP24Q15
3 on Hand
More Info/Options for Bergstrom Advantage 3 Triple Point Carbides 031883
|
|
|
|
$769.99
H59831 Accutronix Smooth 3 degree 39mm Triple Tree Wide-Glide Conversion Kit
Dennis Kirk Part #: H59831
H59831 Accutronix Smooth 3 degree 39mm Triple Tree Wide-Glide Conversion Kit: Manufacturer part # TWD339EK - Give your bike the look it deserves with these triple trees in Elite or Smooth design. Available with standard or 3 degree rake triple trees with top OEM style or bottom headlight mount style. Chrome-plated, CNC-machined, T-6 billet aluminum. Elite design incorporates OEM-style top-mount headlight. Kits include upper and lower triple clamps, stem with nut, fork stop, axle with spacers, fender and rotor spacers. Use your stock fork assembly, front fender, front wheel and headlight. Neck post bearings and races are not included. Made in the U.S.A.. NOTE: Kits include a single-disc spacer; dual-disc applications require an additional spacer (sold separately).. NOTE: This item ships 3-4 days after the order is placed.. TWD339EK
1 on Hand
More Info/Options for H59831 Accutronix Smooth 3 degree 39mm Triple Tree Wide-Glide Conversion Kit
|
|
|
|
$769.99
H59824 Accutronix Elite 3 degree 39mm Triple Tree Wide-Glide Conversion Kit
Dennis Kirk Part #: H59824
H59824 Accutronix Elite 3 degree 39mm Triple Tree Wide-Glide Conversion Kit: Manufacturer part # TWG339EHLK2 - Give your bike the look it deserves with these triple trees in Elite or Smooth design. Available with standard or 3 degree rake triple trees with top OEM style or bottom headlight mount style. Chrome-plated, CNC-machined, T-6 billet aluminum. Elite design incorporates OEM-style top-mount headlight. Kits include upper and lower triple clamps, stem with nut, fork stop, axle with spacers, fender and rotor spacers. Use your stock fork assembly, front fender, front wheel and headlight. Neck post bearings and races are not included. Made in the U.S.A.. NOTE: Kits include a single-disc spacer; dual-disc applications require an additional spacer (sold separately).. NOTE: This item ships 3-4 days after the order is placed.. TWG339EHLK2
1 on Hand
More Info/Options for H59824 Accutronix Elite 3 degree 39mm Triple Tree Wide-Glide Conversion Kit
|
|
|
|
$769.99
H59809 Accutronix Smooth 3 degree 39mm Triple Tree Mid-Glide Conversion Kit
Dennis Kirk Part #: H59809
H59809 Accutronix Smooth 3 degree 39mm Triple Tree Mid-Glide Conversion Kit: Manufacturer part # TMG339ESHLK - Give your bike the look it deserves with these triple trees in Elite or Smooth design. Available with standard or 3 degree rake triple trees with top OEM style or bottom headlight mount style. Chrome-plated, CNC-machined, T-6 billet aluminum. Elite design incorporates OEM-style top-mount headlight. Kits include upper and lower triple clamps, stem with nut, fork stop, axle with spacers, fender and rotor spacers. Use your stock fork assembly, front fender, front wheel and headlight. Neck post bearings and races are not included. Made in the U.S.A.. NOTE: Kits include a single-disc spacer; dual-disc applications require an additional spacer (sold separately).. NOTE: This item ships 3-4 days after the order is placed.. TMG339ESHLK
1 on Hand
More Info/Options for H59809 Accutronix Smooth 3 degree 39mm Triple Tree Mid-Glide Conversion Kit
|
|
|
|
$769.99
H59823 Accutronix Smooth 3 degree 39mm Triple Tree Wide-Glide Conversion Kit
Dennis Kirk Part #: H59823
H59823 Accutronix Smooth 3 degree 39mm Triple Tree Wide-Glide Conversion Kit: Manufacturer part # TWD339ESHLK2 - Give your bike the look it deserves with these triple trees in Elite or Smooth design. Available with standard or 3 degree rake triple trees with top OEM style or bottom headlight mount style. Chrome-plated, CNC-machined, T-6 billet aluminum. Elite design incorporates OEM-style top-mount headlight. Kits include upper and lower triple clamps, stem with nut, fork stop, axle with spacers, fender and rotor spacers. Use your stock fork assembly, front fender, front wheel and headlight. Neck post bearings and races are not included. Made in the U.S.A.. NOTE: Kits include a single-disc spacer; dual-disc applications require an additional spacer (sold separately).. NOTE: This item ships 3-4 days after the order is placed.. TWD339ESHLK2
1 on Hand
More Info/Options for H59823 Accutronix Smooth 3 degree 39mm Triple Tree Wide-Glide Conversion Kit
|
|
|
|
$769.99
H59833 Accutronix Elite 3 degree 39mm Triple Tree Wide-Glide Conversion Kit
Dennis Kirk Part #: H59833
H59833 Accutronix Elite 3 degree 39mm Triple Tree Wide-Glide Conversion Kit: Manufacturer part # TWG339EK - Give your bike the look it deserves with these triple trees in Elite or Smooth design. Available with standard or 3 degree rake triple trees with top OEM style or bottom headlight mount style. Chrome-plated, CNC-machined, T-6 billet aluminum. Elite design incorporates OEM-style top-mount headlight. Kits include upper and lower triple clamps, stem with nut, fork stop, axle with spacers, fender and rotor spacers. Use your stock fork assembly, front fender, front wheel and headlight. Neck post bearings and races are not included. Made in the U.S.A.. NOTE: Kits include a single-disc spacer; dual-disc applications require an additional spacer (sold separately).. NOTE: This item ships 3-4 days after the order is placed.. TWG339EK
1 on Hand
More Info/Options for H59833 Accutronix Elite 3 degree 39mm Triple Tree Wide-Glide Conversion Kit
|
|
|
|
$851.99
H59829 Accutronix Elite 3 degree 39mm Triple Tree Mid-Glide Conversion Kit
Dennis Kirk Part #: H59829
H59829 Accutronix Elite 3 degree 39mm Triple Tree Mid-Glide Conversion Kit: Manufacturer part # TMG339EK - Give your bike the look it deserves with these triple trees in Elite or Smooth design. Available with standard or 3 degree rake triple trees with top OEM style or bottom headlight mount style. Chrome-plated, CNC-machined, T-6 billet aluminum. Elite design incorporates OEM-style top-mount headlight. Kits include upper and lower triple clamps, stem with nut, fork stop, axle with spacers, fender and rotor spacers. Use your stock fork assembly, front fender, front wheel and headlight. Neck post bearings and races are not included. Made in the U.S.A.. NOTE: Kits include a single-disc spacer; dual-disc applications require an additional spacer (sold separately).. NOTE: This item ships 3-4 days after the order is placed.. TMG339EK
1 on Hand
More Info/Options for H59829 Accutronix Elite 3 degree 39mm Triple Tree Mid-Glide Conversion Kit
|
|
