3 Start

$7.99 Novus Polish 3 NOVUS NO 3
Manufacturer: Novus
Dennis Kirk Part #: 301300
Novus Polish 3: Manufacturer part # NOVUS NO 3 - Removes scratches in visors, goggle lenses, windshields and plastic body parts. Novus No. 3 takes out heavy scratches in Lucite® and Plexiglas® surfaces (use both No. 1 and No. 2 for detail polishing). Novus No. 2 - (3186) is a medium-duty formula designed to remove fine scratches, abrasions and haziness. After using Novus No. 2 or No. 3, apply Novus No. 1 - (3185) light-duty formula for a clean, highly polished, static- and dust-free surface. 8 oz bottle. , NOTE: Not recommended for Lexan® and some polycarbonate-coated plastics.. NOVUS NO 3
More than 10 on hand

More Info/Options for Novus Polish 3 NOVUS NO 3

3 Start

CLEARANCE!
Was: $23.99
Now: $17.99
Starting Line The Podd Gauge Mounting System/3 in. Single Side Mount 19-6
Manufacturer: Starting Line
Dennis Kirk Part #: 170718
Starting Line The Podd Gauge Mounting System/3 in. Single Side Mount: Manufacturer part # 19-6 - All popular 3" gauges can be securely mounted. Functional and fashionable.. 19-6
1 on hand

More Info/Options for Starting Line The Podd Gauge Mounting System/3 in. Single Side Mount 19-6

3 Start

$3992.99 Rivera Engineering Brute V 14mm x 87.5mm (3 1/2 in.) Belt Drive System w/Direct Drive Center-Mounted Electric Start 20160060
Manufacturer: Rivera Engineering
Dennis Kirk Part #: 02729
Rivera Engineering Brute V 14mm x 87.5mm (3 1/2 in.) Belt Drive System w/Direct Drive Center-Mounted Electric Start: Manufacturer part # 20160060 - Designed for high-performance, high-compression motors needing significantly more than average electric start capabilities. Uses a 78-tooth starter ring gear on the back side of the front pulley; starter motor is then mounted to the rear of the front pulley allowing the pinion gear to engage the starter ring gear. 54:1 starting ratio at the crank. Starter is a proprietary "monster torque" assembly with a 6:1 planetary gear reduction. Starter motor features a polished chrome finish and pulls approximately 280-300 amps with the stock starter placement. Includes a built-in degree wheel to help with engine tuning, Pro Clutch set-up, a two-piece polished motor plate, super-stylish smoothie belt guard, starter relay and wiring and installation instructions.. 20160060
1 on hand

More Info/Options for Rivera Engineering Brute V 14mm x 87.5mm (3 1/2 in.) Belt Drive System w/Direct Drive Center-Mounted Electric Start 20160060

3 Start

$24.95 Sport Parts Inc. 3 in. Handlebar Riser SM-08078-3
Manufacturer: Sport Parts Inc.
Dennis Kirk Part #: 592880
Sport Parts Inc. 3 in. Handlebar Riser: Manufacturer part # SM-08078-3 - Black extruded 6061 T-6 aluminum risers. Include riser, four nuts and four bolts. Throttle cable extensions kit (sold separately) allows up 10" of additional reach, Part No. 194404. SM-08078-3
10 on hand

More Info/Options for Sport Parts Inc. 3 in. Handlebar Riser SM-08078-3

3 Start

$24.95 Sport Parts Inc. 3 in. Handlebar Riser SM-08068-3
Manufacturer: Sport Parts Inc.
Dennis Kirk Part #: 592877
Sport Parts Inc. 3 in. Handlebar Riser: Manufacturer part # SM-08068-3 - Black extruded 6061 T-6 aluminum riser. Include riser, four nuts and four bolts. Throttle cable extensions kit (sold separately) allows up 10" of additional reach, Part No. 194404. SM-08068-3
10 on hand

More Info/Options for Sport Parts Inc. 3 in. Handlebar Riser SM-08068-3

3 Start

$179.99 Hot Cams Stage 3 Stroker Hot Cam 1078-3
Manufacturer: Hot Cams
Dennis Kirk Part #: 149994
Hot Cams Stage 3 Stroker Hot Cam: Manufacturer part # 1078-3 - Extract maximum performance from your engine. Hot Cams provide increased intake and exhaust duration for improved breathability and more horsepower. Provides significantly more mid-range punch and top-end speed for most models. Core trade-in not required so you can keep the original camshaft. Single-cam motor. Huge top-end and great over rev in supermoto and big bore/strokers Uses stock valve springs and auto-decompression mechanism. , Specs: , Intake Lift: 10.4mm, Intake Duration (@1mm): 251.5 Degrees, Exhaust Lift: 9.05mm, Exhaust Duration (@ 1mm): 265 Degrees. 1078-3
1 on hand

More Info/Options for Hot Cams Stage 3 Stroker Hot Cam 1078-3

3 Start

$179.99 Hot Cams Stage 3 Cam 1051-3
Manufacturer: Hot Cams
Dennis Kirk Part #: 149530
Hot Cams Stage 3 Cam: Manufacturer part # 1051-3 - Extract maximum performance from your engine. Hot Cams provide increased intake and exhaust duration for improved breathability and more horsepower. Provides significantly more mid-range punch and top-end speed for most models. Core trade-in not required so you can keep the original camshaft. , NOTE: Recomended for big-bore stroker applications only, for mid-range, and top end, , Intake Lift: 9.1mm, Intake Duration (@ 1mm): 262 Degress, Exhaust Lift: 9mm, Exhaust Duration (@ 1mm): 257 Degress. 1051-3
1 on hand

More Info/Options for Hot Cams Stage 3 Cam 1051-3

3 Start

$179.99 Hot Cams Stage 3 Stroker Cam 1056-3
Manufacturer: Hot Cams
Dennis Kirk Part #: 149531
Hot Cams Stage 3 Stroker Cam: Manufacturer part # 1056-3 - Extract maximum performance from your engine. Hot Cams provide increased intake and exhaust duration for improved breathability and more horsepower. Provides significantly more mid-range punch and top-end speed for most models. Core trade-in not required so you can keep the original camshaft. , NOTE: Specifically designed to produce more mid-range and top-end power in big bore and stroker applications - not stock displacement, , Intake Lift: 10.4mm, Intake Duration (@ 1mm): 251.5 Degrees, Exhaust Lift: 9mm, Exhaust Duration: (@ 1mm): 265 Degress. 1056-3
2 on hand

More Info/Options for Hot Cams Stage 3 Stroker Cam 1056-3

3 Start

$179.99 Hot Cams Stage 3 Cam 4050-3
Manufacturer: Hot Cams
Dennis Kirk Part #: 149548
Hot Cams Stage 3 Cam: Manufacturer part # 4050-3 - Extract maximum performance from your engine. Hot Cams provide increased intake and exhaust duration for improved breathability and more horsepower. Provides significantly more mid-range punch and top-end speed for most models. Core trade-in not required so you can keep the original camshaft. , NOTE: Specifically designed for big bore and stroker applications - not stock displacement, , Intake Lift: 10.16mm, Intake Duration (@ 1mm): 265 Degrees, Exhaust Lift: 10.82mm, Exhaust Duration (@ 1mm): 271 Degrees NOTE: Requires kibblewhite spring kit part NO. 18-1872 to work properly - Must be ordered separately... 4050-3
2 on hand

More Info/Options for Hot Cams Stage 3 Cam 4050-3

3 Start

$24.95 Sport Parts Inc. 3 in. Handlebar Riser SM-08067-3
Manufacturer: Sport Parts Inc.
Dennis Kirk Part #: 592874
Sport Parts Inc. 3 in. Handlebar Riser: Manufacturer part # SM-08067-3 - Black extruded 6061 T-6 aluminum riser. Include riser, four nuts and four bolts. Throttle cable extensions kit (sold separately) allows up 10" of additional reach, Part No. 194404. SM-08067-3
More than 10 on hand

More Info/Options for Sport Parts Inc. 3 in. Handlebar Riser SM-08067-3

3 Start

$24.95 Sport Parts Inc. 3 in. Handlebar Riser Kit SM-08066-3
Manufacturer: Sport Parts Inc.
Dennis Kirk Part #: 592871
Sport Parts Inc. 3 in. Handlebar Riser Kit: Manufacturer part # SM-08066-3 - Black extruded 6061 T-6 aluminum riser. Include riser, four nuts and four bolts. Throttle cable extensions kit (sold separately) allows up 10" of additional reach, Part No. 194404. SM-08066-3
More than 10 on hand

More Info/Options for Sport Parts Inc. 3 in. Handlebar Riser Kit SM-08066-3

3 Start

$124.99 Metzeler Enduro 3 Sahara Front Tire ENDURO 3 SAHARA
Manufacturer: Metzeler
Dennis Kirk Part #: 643037
Metzeler Enduro 3 Sahara Front Tire: Manufacturer part # ENDURO 3 SAHARA - 50 Percent On - 50 Percent Off Road . , Enduro tire with very good on-road performance dedicated to the globetrotters always looking for fun riding no matter what the terrain. Special tread compound perfectly combining good cornering grip on the road and good off-road traction. Tread pattern knobs geometry designed for fast self-cleaning - this allows the rider stable and precise trajectories without skidding also on soft, muddy terrains. Great handling with easy corner entry, stable cornering and high safety margins when riding at the limit. Sidewall ID Information: Metzeler Sahara Enduro 3 90/90-21 M/C 54H. , Dimensions: , Inflated Width/Measuring Rim Width: 3.54 in./2.15 in., Inflated Diameter: 27.36 in., Acceptable Rim Width(s): 1.60-2.50 in., Deepest Tread Depth: 8/32 in., Balance DOT: Yes-Red, Directional Arrow: No, Speed Rating: H-Rated up to 130 mph, , Capacities and Construction:, Load Capacity/Inflation Pressure: 467 LBS/33 PSI, Load Range: B, Bias or Radial Ply: Bias, Tread Plies/Material: 2 Nylon, Sidewall Plies/Material: 2 Nylon, DOT Approved for Road Use: Yes, Tube or Tubeless: Tubeless. ENDURO 3 SAHARA
Expected Soon

More Info/Options for Metzeler Enduro 3 Sahara Front Tire ENDURO 3 SAHARA

3 Start

3 Start