3 Point

$174.99 MC Enterprises Case Guards 3 Point 986
Manufacturer: MC Enterprises
Dennis Kirk Part #: 50566
MC Enterprises Case Guards 3 Point: Manufacturer part # 986 - These case guards offer an extra footrest position and engine side protection Fabricated from 1 in. heavy-wall tubing for a better fit. Triple chrome-plated and hand polished. Available with two- or three-point mounting. Adjustable footpads included with three-point types, except as noted. Motor mount bolts included when necessary. Pads not included, to order use part number 50-420. , , Included Items: , (1) Case Guards Right and Left, (1) 3/8-24 x 12 7/8 in. Stud Bolt, (1) 7/16-20 x 11 3/4 in. Stud Bolt, (2) 3/8-24 Hex Nuts, (2) 7/16-20 Hex Nuts, (2) 3/8 in. Flat Washers, (2) 7/16 in. Flat Washers. 986
2 on hand

More Info/Options for MC Enterprises Case Guards 3 Point 986

3 Point

$17.95 Parts Unlimited 3-Point Tow Rope TOW01
Manufacturer: Parts Unlimited
Dennis Kirk Part #: 3915
Parts Unlimited 3-Point Tow Rope: Manufacturer part # TOW01 - A must for every tool kit. Heavy-duty three-point tow rope means the towed machine follow automatically - no passenger needed. Spring clip hook on each end, will not fall off machine while towing. Each side is 4 1/2 feet long.. TOW01
More than 10 on hand

More Info/Options for Parts Unlimited 3-Point Tow Rope TOW01

3 Point

$10.95 Sno Rider 3-Point Tow Rope SR1010
Manufacturer: Sno Rider
Dennis Kirk Part #: 391133
Sno Rider 3-Point Tow Rope: Manufacturer part # SR1010 - Three-point tow rope yields both strength and durability. Both 1 in.-wide nylon and each sides are 5 feet long. Three rubber-coated S-hooks on each end to prevent damage to machines.. SR1010
More than 10 on hand

More Info/Options for Sno Rider 3-Point Tow Rope SR1010

3 Point

$129.99 MC Enterprises Case Guards 3 Point 2029
Manufacturer: MC Enterprises
Dennis Kirk Part #: 50569
MC Enterprises Case Guards 3 Point: Manufacturer part # 2029 - These case guards offer an extra footrest position and engine side protection. Fabricated from 1 in. heavy-wall tubing for a better fit. Triple chrome-plated and hand polished. Available with two- or three-point mounting. Adjustable footpads included with three-point types, except as noted. Motor mount bolts included when necessary.. 2029
1 on hand

More Info/Options for MC Enterprises Case Guards 3 Point 2029

3 Point

$124.99 MC Enterprises Case Guards 3 Point 2002
Manufacturer: MC Enterprises
Dennis Kirk Part #: 50549
MC Enterprises Case Guards 3 Point: Manufacturer part # 2002 -. 2002
2 on hand

More Info/Options for MC Enterprises Case Guards 3 Point 2002

3 Point

$7.99 Novus Polish 3 NOVUS NO 3
Manufacturer: Novus
Dennis Kirk Part #: 301300
Novus Polish 3: Manufacturer part # NOVUS NO 3 - Removes scratches in visors, goggle lenses, windshields and plastic body parts. Novus No. 3 takes out heavy scratches in Lucite® and Plexiglas® surfaces (use both No. 1 and No. 2 for detail polishing). Novus No. 2 - (3186) is a medium-duty formula designed to remove fine scratches, abrasions and haziness. After using Novus No. 2 or No. 3, apply Novus No. 1 - (3185) light-duty formula for a clean, highly polished, static- and dust-free surface. 8 oz bottle. , NOTE: Not recommended for Lexan® and some polycarbonate-coated plastics.. NOVUS NO 3
More than 10 on hand

More Info/Options for Novus Polish 3 NOVUS NO 3

3 Point

CLOSEOUT!
Was: $119.50
Now: $71.70
Bergstrom Advantage 3 Triple Point Carbides TP12H06
Manufacturer: Bergstrom
Dennis Kirk Part #: 031861
Bergstrom Advantage 3 Triple Point Carbides: Manufacturer part # TP12H06 - Most dramatic turning carbide in the history of snowmobiling. This outperform and outwears all other carbides; eliminates darting. The only design that actually benefits from the 10 degree tilt of the skies when cornering. Center carbide bears load when going straight; outside edges make contact when turning. Center carbide wears down to the same height as the two outside edges, generating 90 degree edges. Outside carbides with maintain an edge all the way down to the host bar, allowing you to turn on ice or pavement much longer; in effect they are self sharpening. Super-hard inserts are bonded to the host rod at critical pressure points to provide, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long-lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. ***DIMENSIONS Length x Diameter: 14 1/2 in. x 7/16 in. Stud Diameter x Length: 5/16 in. x 2 in. Number of Studs: 2 ***STUD CENTER MOUNTING DISTANCE FROM: Front to 1st: 2 1/8 in. 1st to 2nd : 7 7/8 in. 2nd to End : 4 1/2 in.. TP12H06
1 on hand

More Info/Options for Bergstrom Advantage 3 Triple Point Carbides TP12H06

3 Point

CLEARANCE!
Was: $159.50
Now: $95.70
Bergstrom Advantage 3 Triple Point Carbides TP18H06
Manufacturer: Bergstrom
Dennis Kirk Part #: 031871
Bergstrom Advantage 3 Triple Point Carbides: Manufacturer part # TP18H06 - Most dramatic turning carbide in the history of snowmobiling. This outperform and outwears all other carbides; eliminates darting. The only design that actually benefits from the 10 degree tilt of the skies when cornering. Center carbide bears load when going straight; outside edges make contact when turning. Center carbide wears down to the same height as the two outside edges, generating 90 degree edges. Outside carbides with maintain an edge all the way down to the host bar, allowing you to turn on ice or pavement much longer; in effect they are self sharpening. Super-hard inserts are bonded to the host rod at critical pressure points to provide, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long-lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. ***DIMENSIONS Length x Diameter: 14 1/2 in. x 7/16 in. Stud Diameter x Length: 5/16 in. x 2 in. Number of Studs: 2 ***STUD CENTER MOUNTING DISTANCE FROM: Front to 1st: 2 1/8 in. 1st to 2nd : 4 7/8 in. 2nd to End : 4 1/2 in.. TP18H06
2 on hand

More Info/Options for Bergstrom Advantage 3 Triple Point Carbides TP18H06

3 Point

CLEARANCE!
Was: $199.50
Now: $119.70
Bergstrom Advantage 3 Triple Point Carbides TP24H06
Manufacturer: Bergstrom
Dennis Kirk Part #: 031880
Bergstrom Advantage 3 Triple Point Carbides: Manufacturer part # TP24H06 - Most dramatic turning carbide in the history of snowmobiling. This outperform and outwears all other carbides; eliminates darting. The only design that actually benefits from the 10 degree tilt of the skies when cornering. Center carbide bears load when going straight; outside edges make contact when turning. Center carbide wears down to the same height as the two outside edges, generating 90 degree edges. Outside carbides with maintain an edge all the way down to the host bar, allowing you to turn on ice or pavement much longer; in effect they are self sharpening. Super-hard inserts are bonded to the host rod at critical pressure points to provide, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rod?s contact area gives you long-lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. ***DIMENSIONS Length x Diameter: 14 1/2 in. x 7/16 in. Stud Diameter x Length: 5/16 in. x 2 in. Number of Studs: 2 ***STUD CENTER MOUNTING DISTANCE FROM: Front to 1st: 2 1/8 in. 1st to 2nd : 7 7/8 in. 2nd to 3rd : 4 1/2 in.. TP24H06
2 on hand

More Info/Options for Bergstrom Advantage 3 Triple Point Carbides TP24H06

3 Point

$63.99 Custom Cycle Pointed 3 1/4 in. Cut-To Length Chrome Breather Bolt Kit - 1/2 in.-13 DM5500K
Manufacturer: Custom Cycle
Dennis Kirk Part #: 182839
Custom Cycle Pointed 3 1/4 in. Cut-To Length Chrome Breather Bolt Kit - 1/2 in.-13: Manufacturer part # DM5500K - Eases mounting of a carb support bracket. Available in two styles. Sold in pairs.. DM5500K
1 on hand

More Info/Options for Custom Cycle Pointed 3 1/4 in. Cut-To Length Chrome Breather Bolt Kit - 1/2 in.-13 DM5500K

3 Point

$24.95 Sport Parts Inc. 3 in. Handlebar Riser SM-08078-3
Manufacturer: Sport Parts Inc.
Dennis Kirk Part #: 592880
Sport Parts Inc. 3 in. Handlebar Riser: Manufacturer part # SM-08078-3 - Black extruded 6061 T-6 aluminum risers. Include riser, four nuts and four bolts. Throttle cable extensions kit (sold separately) allows up 10" of additional reach, Part No. 194404. SM-08078-3
10 on hand

More Info/Options for Sport Parts Inc. 3 in. Handlebar Riser SM-08078-3

3 Point

$24.95 Sport Parts Inc. 3 in. Handlebar Riser SM-08068-3
Manufacturer: Sport Parts Inc.
Dennis Kirk Part #: 592877
Sport Parts Inc. 3 in. Handlebar Riser: Manufacturer part # SM-08068-3 - Black extruded 6061 T-6 aluminum riser. Include riser, four nuts and four bolts. Throttle cable extensions kit (sold separately) allows up 10" of additional reach, Part No. 194404. SM-08068-3
10 on hand

More Info/Options for Sport Parts Inc. 3 in. Handlebar Riser SM-08068-3

3 Point

3 Point