$15.95AMS 3/8 in. Flat Chrome Lugnuts 0223-0022
Manufacturer: AMS
Dennis Kirk Part #: 552020
AMS 3/8 in. Flat Chrome Lugnuts: Manufacturer part # 0223-0022 - Sold in packs of 16. For 4/156 steel wheel applications.. 0223-0022 4 on hand
$19.99ITP 3/8 in.-24 Flat Base Lug Nut ALUG11BX
Manufacturer: ITP
Dennis Kirk Part #: 550207
ITP 3/8 in.-24 Flat Base Lug Nut: Manufacturer part # ALUG11BX - This is a perfect finishing touch for ITP wheel kit C-Series Delta Steel, 3/8 in.-24 base chrome lug nut. Will fit the following: All Polaris 4/156 wheel and kit applications.. ALUG11BX 1 on hand
$7.99Novus Polish 3 NOVUS NO 3
Manufacturer: Novus
Dennis Kirk Part #: 301300
Novus Polish 3: Manufacturer part # NOVUS NO 3 - Removes scratches in visors, goggle lenses, windshields and plastic body parts. Novus No. 3 takes out heavy scratches in Lucite® and Plexiglas® surfaces (use both No. 1 and No. 2 for detail polishing). Novus No. 2 - (3186) is a medium-duty formula designed to remove fine scratches, abrasions and haziness. After using Novus No. 2 or No. 3, apply Novus No. 1 - (3185) light-duty formula for a clean, highly polished, static- and dust-free surface. 8 oz bottle. , NOTE: Not recommended for Lexan® and some polycarbonate-coated plastics.. NOVUS NO 3 More than 10 on hand
$179.99Hot Cams Stage 3 Stroker Hot Cam 1078-3
Manufacturer: Hot Cams
Dennis Kirk Part #: 149994
Hot Cams Stage 3 Stroker Hot Cam: Manufacturer part # 1078-3 - Extract maximum performance from your engine. Hot Cams provide increased intake and exhaust duration for improved breathability and more horsepower. Provides significantly more mid-range punch and top-end speed for most models. Core trade-in not required so you can keep the original camshaft. Single-cam motor. Huge top-end and great over rev in supermoto and big bore/strokers Uses stock valve springs and auto-decompression mechanism. , Specs: , Intake Lift: 10.4mm, Intake Duration (@1mm): 251.5 Degrees, Exhaust Lift: 9.05mm, Exhaust Duration (@ 1mm): 265 Degrees. 1078-3 1 on hand
$179.99Hot Cams Stage 3 Cam 1051-3
Manufacturer: Hot Cams
Dennis Kirk Part #: 149530
Hot Cams Stage 3 Cam: Manufacturer part # 1051-3 - Extract maximum performance from your engine. Hot Cams provide increased intake and exhaust duration for improved breathability and more horsepower. Provides significantly more mid-range punch and top-end speed for most models. Core trade-in not required so you can keep the original camshaft. , NOTE: Recomended for big-bore stroker applications only, for mid-range, and top end, , Intake Lift: 9.1mm, Intake Duration (@ 1mm): 262 Degress, Exhaust Lift: 9mm, Exhaust Duration (@ 1mm): 257 Degress. 1051-3 1 on hand
$179.99Hot Cams Stage 3 Stroker Cam 1056-3
Manufacturer: Hot Cams
Dennis Kirk Part #: 149531
Hot Cams Stage 3 Stroker Cam: Manufacturer part # 1056-3 - Extract maximum performance from your engine. Hot Cams provide increased intake and exhaust duration for improved breathability and more horsepower. Provides significantly more mid-range punch and top-end speed for most models. Core trade-in not required so you can keep the original camshaft. , NOTE: Specifically designed to produce more mid-range and top-end power in big bore and stroker applications - not stock displacement, , Intake Lift: 10.4mm, Intake Duration (@ 1mm): 251.5 Degrees, Exhaust Lift: 9mm, Exhaust Duration: (@ 1mm): 265 Degress. 1056-3 2 on hand
$179.99Hot Cams Stage 3 Cam 4050-3
Manufacturer: Hot Cams
Dennis Kirk Part #: 149548
Hot Cams Stage 3 Cam: Manufacturer part # 4050-3 - Extract maximum performance from your engine. Hot Cams provide increased intake and exhaust duration for improved breathability and more horsepower. Provides significantly more mid-range punch and top-end speed for most models. Core trade-in not required so you can keep the original camshaft. , NOTE: Specifically designed for big bore and stroker applications - not stock displacement, , Intake Lift: 10.16mm, Intake Duration (@ 1mm): 265 Degrees, Exhaust Lift: 10.82mm, Exhaust Duration (@ 1mm): 271 Degrees NOTE: Requires kibblewhite spring kit part NO. 18-1872 to work properly - Must be ordered separately... 4050-3 Expected Soon
$124.99Metzeler Enduro 3 Sahara Front Tire ENDURO 3 SAHARA
Manufacturer: Metzeler
Dennis Kirk Part #: 643037
Metzeler Enduro 3 Sahara Front Tire: Manufacturer part # ENDURO 3 SAHARA - 50 Percent On - 50 Percent Off . , , Enduro tire with very good on-road performance dedicated to the globetrotters always looking for fun riding no matter what the terrain. Special tread compound perfectly combining good cornering grip on the road and good off-road traction. Tread pattern knobs geometry designed for fast self-cleaning - this allows the rider stable and precise trajectories without skidding also on soft, muddy terrains. Great handling with easy corner entry, stable cornering and high safety margins when riding at the limit. Sidewall ID Information: Metzeler Sahara Enduro 3 90/90-21 M/C 54H. DIMENSIONS , Inflated Width/Measuring Rim Width: 3.54"/2.15, Inflated Diameter: 27.36 in., Acceptable Rim Width(s): 1.60"-2.50", Deepest Tread Depth: 8/32 in., Balance DOT: Yes-Red, Directional Arrow: No, Speed Rating: H-Rated up to 130 mph, , CAPACITIES AND CONSTRUCTION, Load Capacity/Inflation Pressure: 467 LBS/33 PSI, Load Range: B, Bias or Radial Ply: Bias, Tread Plies/Material: 2 Nylon, Sidewall Plies/Material: 2 Nylon, DOT Approved for Road Use: Yes, Tube or Tubeless: Tubeless .. ENDURO 3 SAHARA Expected Soon
$144.99Metzeler Enduro 3 Sahara Rear Tire ENDURO 3 SAHARA 643038
Manufacturer: Metzeler
Dennis Kirk Part #: 643038
Metzeler Enduro 3 Sahara Rear Tire: Manufacturer part # ENDURO 3 SAHARA - DennisKirk Part # 643038 - 50 Percent On - 50 Percent Off . , , Enduro tire with very good on-road performance dedicated to the globetrotters always looking for fun riding no matter what the terrain. Special tread compound perfectly combining good cornering grip on the road and good off-road traction. Tread pattern knobs geometry designed for fast self-cleaning - this allows the rider stable and precise trajectories without skidding also on soft, muddy terrains. Great handling with easy corner entry, stable cornering and high safety margins when riding at the limit. DOT certified. Sidewall ID Information: Metzeler Sahara Enduro 3 130/80-17 M/C 65T. DIMENSIONS Inflated Width/Measuring Rim Width: 5.11 in./3.00 in. Inflated Diameter: 25.94 in. Acceptable Rim Width(s): 2.50 in.-3.50 in. Deepest Tread Depth: 12/32 in. Balance DOT: No Directional Arrow: No Speed Rating: T-Rated up to 118 mph , CAPACITIES AND CONSTRUCTION Load Capacity/Inflation Pressure: 639 LBS/38 PSI Load Range: B Bias or Radial Ply: Bias Tread Plies/Material: 4 Polyester Sidewall Plies/Material: 2 Polyester DOT Approved for Road Use: Yes Tube or Tubeless: Tubeless. ENDURO 3 SAHARA 1 on hand
$157.99Metzeler Enduro 3 Sahara Rear Tire ENDURO 3 SAHARA 643052
Manufacturer: Metzeler
Dennis Kirk Part #: 643052
Metzeler Enduro 3 Sahara Rear Tire: Manufacturer part # ENDURO 3 SAHARA - DennisKirk Part # 643052 - 50 Percent On - 50 Percent Off . , , Enduro tire with very good on-road performance dedicated to the globetrotters always looking for fun riding no matter what the terrain. Special tread compound perfectly combining good cornering grip on the road and good off-road traction. Tread pattern knobs geometry designed for fast self-cleaning - this allows the rider stable and precise trajectories without skidding also on soft, muddy terrains. Great handling with easy corner entry, stable cornering and high safety margins when riding at the limit. DOT certified. , , DIMENSIONS:Inflated Width/Measuring Rim Width: 5.59"/3.50". , Inflated Diameter: 25.82". , Acceptable Rim Widths: 2.75"-3.75". , Deepest Tread Debth: 6/32". , Balance Dot: NO. , Directional arrow: Yes. , Speed Rating: H-Rated for speeds up to 130 MPH. , , CAPACITIES AND CONSTRUCTION:. , Load Capacity/Inflation Pressure: 716 LBS/42 PSI. , Load Range: B. , Bias or Radial Ply: Bias. , Tread Plies/Material: 4 Nylon. , Sidewall Plies/Material: 2 Nylon. , DOT approved for Road Use: Yes. , Tube or Tubeless: Either, depending on the rim.. ENDURO 3 SAHARA 2 on hand
$129.99Metzeler Enduro 3 Sahara Rear Tire ENDURO 3 SAHARA
Manufacturer: Metzeler
Dennis Kirk Part #: 643105
Metzeler Enduro 3 Sahara Rear Tire: Manufacturer part # ENDURO 3 SAHARA - 50 Percent On - 50 Percent Off . , , Enduro tire with very good on-road performance dedicated to the globetrotters always looking for fun riding no matter what the terrain. Special tread compound perfectly combining good cornering grip on the road and good off-road traction. Tread pattern knobs geometry designed for fast self-cleaning - this allows the rider stable and precise trajectories without skidding also on soft, muddy terrains. Great handling with easy corner entry, stable cornering and high safety margins when riding at the limit. DOT certified. Speed rated for 112 mph. Sidewall ID Information: Metzler Sahara Enduro 3 140/80-18 M/C 70S. DIMENSIONS Inflated Width/Measuring Rim Width: 5.59 in./3.50 in. Inflated Diameter: 26.81 in. Acceptable Rim Width(s): 2.75 in.-3.75 in. Deepest Tread Depth: 13/32 in. Balance DOT: No Directional Arrow: Yes Speed Rating: S-Rated up to 112 mph , CAPACITIES AND CONSTRUCTION Load Capacity/Inflation Pressure: 739 LBS/36 PSI Load Range: B Bias or Radial Ply: Bias Tread Plies/Material: 4 Nylon Sidewall Plies/Material: 3 Nylon DOT Approved for Road Use: Yes Tube or Tubeless: Tubeless. ENDURO 3 SAHARA 1 on hand
$5.99Factory Effex 4 in. #3 Mini-Pro 04-2573
Manufacturer: Factory Effex
Dennis Kirk Part #: 523446
Factory Effex 4 in. #3 Mini-Pro: Manufacturer part # 04-2573 - The best fitting, highest quality numbers you can get. Cut from 12 mil high-gloss vinyl. Strong adhesive even withstands pressure washing. AMA, FIM, and NMA legal. 8 in. Pro numbers fit 2 digits per number plate. 7 in. Pro numbers fit 3 digit per number plate. Mini Pro numbers fit 3 digits per number plate. Sold in 3-pk.. 04-2573 2 on hand
