|
|
$100.99
4/110/9/3+6/Front or Rear/9 ITP Baja T-9 Pro Series
Dennis Kirk Part #: 550454
4/110/9/3+6/Front or Rear/9 ITP Baja T-9 Pro Series: Manufacturer part # 0925427403 - Please note: Customer determines position based on size specs , , Inner and outer reinforcing rings that are rolled in and not welded -- offering you a solid wheel that will go the distance. A superb design gives you a better wheel at a lower cost. Incredible strength but still extremely light LUG NUT REQUIREMENT: Flat. Large Bell design for brake clearance. All models listed are for Front only Aftermarket wheels are not exact matches for OEM wheels. This wheel is specified for every model that it will bolt onto, regardless of the original wheel?s width, diameter, offset and other specifications. It is your responsibility to determine whether it has similar specifications to your original wheel or not, and whether a tire size change is necessary when fitting it. When changing wheel offset, width, diameter or tire size from the original, you must check clearance for the brakes, a-arms, fenders and any other items that the wheel or tire may interfere with before mounting a tire on the wheel or the assembly to your ATV. If the replacement wheel's offset does not match the original exactly, it is better to have less offset in and more offset out to eliminate possible clearance issues. For additional information, including your original wheel sizes and offset, refer to our printed catalog or contact us.. 0925427403
3 on Hand
More Info/Options for 4/110/9/3+6/Front or Rear/9 ITP Baja T-9 Pro Series
|
|
|
|
|
|
$9.99
Ceet 6 in. #3 532229
Dennis Kirk Part #: 532229
Ceet 6 in. #3 532229: Manufacturer part # NBWC63 - Numbers that get you noticed. Thick 18 mil vinyl strong enough to withstand frequent washings. Sold in 3-pack sets, one straight for the front plate, one slanted left and one slanted right for each side plate. Available in black with chrome edge or white with chrome edge in 6 in. and 8 in. sizes.. NBWC63
1 on Hand
More Info/Options for Ceet 6 in. #3 532229
|
|
|
|
|
|
$6.99
N-Style 6 1/2 in. #3 Pro's VI 5253803
Dennis Kirk Part #: 5253803
N-Style 6 1/2 in. #3 Pro's VI 5253803: Manufacturer part # NVI3 - Long-lasting chip-, tear- and spray-resistant. Extra thick 12 mil construction. Pro II numbers work well in 3-digit applications. Low surface-energy adhesive is easy to apply. Numbers stick to almost any surface. PROs are 8 in., PROs II are 7 in., PROs VI are 6 1/2 in. for up to three on minibikes, PROs IIII are 5 in.. Sold in 3-pk.. NVI3
Expected Soon
More Info/Options for N-Style 6 1/2 in. #3 Pro's VI 5253803
|
|
|
|
$5.99
N-Style 6 in. #3 Pros III 535063
Dennis Kirk Part #: 535063
N-Style 6 in. #3 Pros III 535063: Manufacturer part # NIII3 - Long-lasting chip-, tear- and spray-resistant. Extra thick 12 mil construction. Pro II numbers work well in 3-digit applications. Low surface-energy adhesive is easy to apply. Numbers stick to almost any surface. PROs are 8 in., PROs II are 7 in., PROs VI are 6 1/2 in. for up to three on minibikes, PROs IIII are 5 in.. Sold in 3-pk.. NIII3
5 on Hand
More Info/Options for N-Style 6 in. #3 Pros III 535063
|
|
|
|
$5.99
N-Style 6 in. #3 Pros III 535073
Dennis Kirk Part #: 535073
N-Style 6 in. #3 Pros III 535073: Manufacturer part # NIII3 - Long-lasting chip-, tear- and spray-resistant. Extra thick 12 mil construction. Pro II numbers work well in 3-digit applications. Low surface-energy adhesive is easy to apply. Numbers stick to almost any surface. PROs are 8 in., PROs II are 7 in., PROs VI are 6 1/2 in. for up to three on minibikes, PROs IIII are 5 in.. Sold in 3-pk.. NIII3
2 on Hand
More Info/Options for N-Style 6 in. #3 Pros III 535073
|
|
|
|
|
|
|
|
$6.99
N-Style 6 1/2 in. #3 Pros VI 5253813
Dennis Kirk Part #: 5253813
N-Style 6 1/2 in. #3 Pros VI 5253813: Manufacturer part # NVI3 - Long-lasting chip-, tear- and spray-resistant. Extra thick 12 mil construction. Pro II numbers work well in 3-digit applications. Low surface-energy adhesive is easy to apply. Numbers stick to almost any surface. PROs are 8 in., PROs II are 7 in., PROs VI are 6 1/2 in. for up to three on minibikes, PROs IIII are 5 in.. Sold in 3-pk.. NVI3
2 on Hand
More Info/Options for N-Style 6 1/2 in. #3 Pros VI 5253813
|
|
|
|
|
|
$75.99
1/2 in./6 in./3/8 in./Wear Rod - Carbide/Pair Woodys Executive Series Carbide Wear Rods
Dennis Kirk Part #: 032012
1/2 in./6 in./3/8 in./Wear Rod - Carbide/Pair Woodys Executive Series Carbide Wear Rods: Manufacturer part # WPI-1125 - Top-Stock hardweld runner (no carbide) designed for extreme service. A full range of carbide wear rod choices for the casual trail rider to the serious rider with a heavily studded track and even for Snocross competition. Carbide types prevent the rear of higher horsepower performance machines from "pushing" the front, especially on icy trails. Special Shur-Steer carbide designs for Polaris with E-Z Steer. Flat-Top host rods on all types for greater support between runner and ski. See separate descriptions for amount of center turning carbide, carbide wear pads and full-length hardweld filler for durability. All studs are long enough for ski skins. Rears are angle-cut for easier unloading and backing up. Sold in pairs; fastening nuts included NOTE Designed for performance trail riders and cross-country racers . 8 inch of 60 degree carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 inch diameter host bar, 3/8 inch studs. , Dimensions:, Length x Diameter: 17-1/2in. x 3/8in., Stud Diameter x Length: 5/16in. x 1-1/8in., Number of Studs: 3. Stud Center Mounting Distance From:, Front to 1st: 3-1/4in., 1st to 2nd: 7-1/8in., 2nd to 3rd: 4-1/8in., 3rd to End: 2in.. Color:Black.. WPI-1125
2 on Hand
More Info/Options for 1/2 in./6 in./3/8 in./Wear Rod - Carbide/Pair Woodys Executive Series Carbide Wear Rods
|
|
