$6.75Novus Polish 2 NOVUS NO 2
Manufacturer: Novus
Dennis Kirk Part #: 3186
Novus Polish 2: Manufacturer part # NOVUS NO 2 - Removes scratches in visors, goggle lenses, windshields and plastic body parts. Novus No. 3 - (301300) takes out heavy scratches in Lucite® and Plexiglass® surfaces (use both No. 1 and No. 2 for detail polishing). Novus No. 2 is a medium-duty formula designed to remove fine scratches, abrasions and haziness. After using Novus No. 2 or No. 3, apply Novus No. 1 - (3185) light-duty formula for a clean, highly polished, static- and dust-free surface. 8 oz bottle. , NOTE: Not recommended for Lexan® and some polycarbonate-coated plastics.. NOVUS NO 2 More than 10 on hand
$175.99Wild 1 Inc. Chubby 9 1/2 in. Tall Pullback Riser Set WO530
Manufacturer: Wild 1 Inc.
Dennis Kirk Part #: 595086
Wild 1 Inc. Chubby 9 1/2 in. Tall Pullback Riser Set: Manufacturer part # WO530 - These 1 1/4" risers are precision-machined from billet aluminum, then show-chromed. Blind hole tapped for standard 1/2" x 13 mounting bolts. Work on all models featuring 3.5" center-to-center riser spacing. Use with any standard 1" handlebar, Wild 1 Chubby Bars and most other bars. Most stock top clamps, after-market top clamps, or Wild 1 custom billet top clamps work with these risers.. WO530 3 on hand
$207.99Wild 1 Inc. Chubby 8 1/2 in. Baby Ape Hanger Bar WO513
Manufacturer: Wild 1 Inc.
Dennis Kirk Part #: 595074
Wild 1 Inc. Chubby 8 1/2 in. Baby Ape Hanger Bar: Manufacturer part # WO513 - These 1 1/4 in. diameter handlebars are 25% thicker than stock handlebars. Designed with fluid bends at precise angles to provide maximum comfort and control. Pre-drilled for internal wiring and feature a dimpled and diamond knurled design in a show-chromed finish. Work with stock and most custom controls, stock risers and top clamps. Made in the U.S.A... WO513 Expected Soon
$207.99Wild 1 Inc. Chubby 12 1/2 in. Ape Hanger Bar WO502
Manufacturer: Wild 1 Inc.
Dennis Kirk Part #: 595063
Wild 1 Inc. Chubby 12 1/2 in. Ape Hanger Bar: Manufacturer part # WO502 - These 1 1/4 in. diameter handlebars are 25% thicker than stock handlebars. Designed with fluid bends at precise angles to provide maximum comfort and control. Work with stock and most custom controls, stock risers and top clamps. Not dimpled. Made in the U.S.A... WO502 Expected Soon
$199.99Carlini One-Piece Risers for 1 1/2 in. Hoghandles HHR-2
Manufacturer: Carlini
Dennis Kirk Part #: H59919
Carlini One-Piece Risers for 1 1/2 in. Hoghandles: Manufacturer part # HHR-2 - For Hoghandle Bars, Part No. H59913 and H59914. HHR-2 1 on hand
$70.99Wild 1 Inc. 2 in. Metric Conversion Riser p595672
Manufacturer: Wild 1 Inc.
Dennis Kirk Part #: 595672
Wild 1 Inc. 2 in. Metric Conversion Riser: Manufacturer part # p595672 - Riser to be used with Part No.s 59-5074, 59-5076, 59-5063, 59-5512, 59-5070, 59-5064, 59-5065, 59-5069, 59-5078, 59-5079, 59-5090, 59-5097 and 59-5098. Part Numbers for Required Wild 1 top clamps: Smooth w/hidden bolts - 595087 Ball-milled w/hidden bolts - 595088 Smooth w/exposed bolts - 595066 Ball-milled w/exposed bolts - 595067. p595672 2 on hand
$208.99Kuryakyn Wild Things ER-2 Cam 403
Manufacturer: Kuryakyn
Dennis Kirk Part #: 149341
Kuryakyn Wild Things ER-2 Cam: Manufacturer part # 403 - Performance cam with wide power band for 80 to 93 inch motors. Will work well in larger low compression motors. Valve springs and spacing required. , , NOTE: Intake Specs , Lift Inches: .560, Opening Degrees: 26, Closing Degrees: 50, Duration Degrees: 256, Lobe Center Degrees: 102, , NOTE: Exhaust Specs , Lift Inches: .510, Opening Degrees: 52, Closing Degrees: 20, Duration Degrees: 252, Lobe Center Degrees: 106. 403 1 on hand
$313.99Kuryakyn Wild Things TC-2 Cam 425
Manufacturer: Kuryakyn
Dennis Kirk Part #: 149812
Kuryakyn Wild Things TC-2 Cam: Manufacturer part # 425 - Power gains through the entire rpm range. Works best in 80 in. to 95 in. motors. 6500 rpm redline. Uses stock splined gear and chain; 1999 models with keyed drive gear will require the installation of a splined gear. , , NOTE: Intake Specs , Lift Inches: .510, Lift at TDC Inches: .169, Opening Degree: 18, Closing Degree: 50, Duration Degree: 248, Lobe Center Degree: 106, , NOTE: Exhaust Specs , Lift Inches: .495, Lift at TDC Inches: .145, Opening Degree: 48, Closing Degree: 14, Duration Degree: 242, Lobe Center Degree: 107. 425 1 on hand
$701.99Wild Card One Piece 2 in. Stretched Softail Style Custom Gas Tank 20185
Manufacturer: Wild Card
Dennis Kirk Part #: 183623
Wild Card One Piece 2 in. Stretched Softail Style Custom Gas Tank: Manufacturer part # 20185 - One piece 2 in. stretched Softail style custom gas tank. Fits customer applications, uses pop up style gas cap - not included holds about 4 gallons. No expense was spared in the construction and finish quality of these gas tanks. All visible welds (when mounted on bike) have been finished and polished to give a nice smooth seamless appearance and then phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. The tank is mounted to the frame using either the supplied weld on front and rear brackets, or one of the weld on front brackets and the supplied Softail horse shoe style rear bracket. When the brackets have been installed they mount to the gas tank using a recessed rubber mounting system which isolates it from vibration and gives a nice flush look. Comes with a weld to frame brackets, Softail horse shoe style rear brackets, rubbers and mounting hardware, stainless filler bung, stainless 13/16 in. (22mm) petcock outlet and stainless breather tube. , , Dimensions: , Overall Length: 23.28 in., Tunnel Length: 19.70 in., Seat Pocket: 3.58 in., Tunnel Width: 2.0 in., Overall Width: 16.18 in., Height: 8.19 in., , NOTE: Before painting these steel gas tanks, we recommend that you mount the tank and check all frame and fork clearances. Gas tanks come with custom mountings including weld on mounting brackets/. We recommend a qualified welder mounts the brackets to the frame., NOTE: All gas tanks must be pressure tested, cleaned with tank cleaner and sealer before painting to protect the final finish and prevent internal rusting during winter storage. Always install the gas tank before painting to check fork, triple tree and handlebar control clearances.. 20185 1 on hand
$113.99HMK 2008 Cruiser 2 Boots Cruiser 2
Manufacturer: HMK
Dennis Kirk Part #: 341111610
HMK 2008 Cruiser 2 Boots: Manufacturer part # Cruiser 2 - Rated to -40 degrees C/-40 degrees F . Boot height is 10 in. with all the features of the original Cruiser 2 and the addition of an improved lacing system. At home on the trail, in the shop or around the cabin; put them on in the morning and stay comfortable all day long. All-weather, water-resistant TPU construction with synthetic leather and textile shell. Forgiving flex with confidence-building support. Dual-zone lacing for maximum comfort and adjustability. Easy-grab nylon webbing heel pull. 400-gram Thinsulate insulation. Removable molded EVA footbed. Sure-grip tread with varied sole pattern for all-around traction. Water resistant but not waterproof.. Cruiser 2 5 on hand
CLEARANCE!
Was: $103.99
Now: $77.99
HMK Cruiser 2 Boots Cruiser 2
Manufacturer: HMK
Dennis Kirk Part #: 340927710
HMK Cruiser 2 Boots: Manufacturer part # Cruiser 2 - Constructed with synthetic leather and a textile shell for all-weather purpose to keep your feet warm all day long. Designed with one-piece for hassle-free utilization. Created for maximum comfort, adjustibility and durability with dual-zone lacing, forgiving flex and reinforced waterproof rubber. 400-gram DuPont Thermolite insulation. Comfort rated to -40°C/-40°F. Removable molded EVA footbed with Hydrophilic Fur. Receive all-around traction with the Sure-grip tread with varied sole patternWater resistant but not waterproof. , , Dimensions: Heel height: 2". Overall height: 9 1/2". Upper height: 7 1/2".. Cruiser 2 1 on hand
$113.99HMK Cruiser 2 Boots Cruiser 2 340927810
Manufacturer: HMK
Dennis Kirk Part #: 340927810
HMK Cruiser 2 Boots: Manufacturer part # Cruiser 2 - DennisKirk Part # 340927810 - Constructed with synthetic leather and a textile shell for all-weather purpose to keep your feet warm all day long. Designed with one-piece for hassle-free utilization. Created for maximum comfort, adjustibility and durability with dual-zone lacing, forgiving flex and reinforced waterproof rubber. 400-gram DuPont Thermolite insulation. Comfort rated to -40°C/-40°F. Molded EVA footbed with Hydrophilic Fur. Receive all-around traction with the Sure-grip tread with varied sole pattern. Water resistant but not waterproof. , , Dimensions: Heel height: 2". Overall height: 9". Upper height: 7".. Cruiser 2 3 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
