$1115.99Russ Wernimont Designs Fuel-Injected Gas Tank - 20 1/2 in. wide 07010189
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 183331
Russ Wernimont Designs Fuel-Injected Gas Tank - 20 1/2 in. wide: Manufacturer part # 07010189 - 6-gallon one-piece tanks are 1 1/2 in. wider than stock tanks. Feature a 3 in. stretch and curved bottom for a custom look. Replace the existing dash with the included raw dash panel. Includes a factory sealed powder-coated primer finish. Stock OEM fuel-pump assemblies work with the fuel-injected tanks and use a L96-06 vented gas cap. Carb tanks include a filler plate and neck assembly that uses a L96-06 vented gas cap. Tanks fit with RWD ProTour (454539) and Profile (454538) Seats, sold separately - Danny Grey seats also available: 455060, 455061, 455062, 455063, 455064, 455065, 455066, 455067. Made in the U.S.A.. , NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending units, , NOTE: This item ships 3 or 4 days after the order is placed, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 07010189 1 on hand
$1115.99Russ Wernimont Designs Carb Gas Tank - 17 1/2 in. wide p183703
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 183704
Russ Wernimont Designs Carb Gas Tank - 17 1/2 in. wide: Manufacturer part # p183703 - 17 1/2" and 20 1/2 in. widths are now available. A 3 in. stretch is featured on one-piece tanks. Curved bottom provides a custom look. Raw dash panel replaces the existing dash. Inside of tanks have a factory sealed powder coat primer. OEM fuel-pump assemblies are accepted on 03-07 style fuel-injected tanks and 96-06 style carb tanks include a filler plate/neck assembly; both use L96-08 non-vented gas caps. Approximate 6-gallon capacity. Tanks fit with RWD Profile (454538) and ProTour (454539) Seats, sold separately - Danny Grey seats also available: 455060, 455061, 455062, 455063, 455064, 455065, 455066, 455067. Made in the U.S.A.. , Dimensions , Length: 22 1/2 in., Width: 18 in., Tunnel Length: 18 1/2 in., , Tunnel Width , Front: 3 1/2 in., Rear: 5 in., , Tunnel Depth: , Front: 4 1/2 in., Rear: 4 1/4 in., , Tank Height: 9 in., Fuel Petcock: Left Rear, Petcock Thread Size: 22mm, Gas Cap Type: Threaded, Fuel Pump Tabs: No, , NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending unit., , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. p183703 1 on hand
$1115.99Russ Wernimont Designs Carb Gas Tank - 20 1/2 in. wide RWD-800C
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 183040
Russ Wernimont Designs Carb Gas Tank - 20 1/2 in. wide: Manufacturer part # RWD-800C - 6-gallon one-piece tanks are 1 1/2 in. wider than stock tanks. Feature a 3 in. stretch and curved bottom for a custom look. Replace the existing dash with the included raw dash panel. Includes a factory sealed powder-coated primer finish. Carb tanks include a filler plate and neck assembly that uses a L96-06 vented gas cap. Tanks fit with RWD ProTour (454539) and Profile (454538) Seats, sold separately - Danny Grey seats also available: 455060, 455061, 455062, 455063, 455064, 455065, 455066, 455067. Made in the U.S.A.. , NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending units, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. RWD-800C 1 on hand
$399.95Drag Specialties One-Piece 2 in. Extended Dash Style Tank w/Fuel Gauge Bung 011814BX46
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18868
Drag Specialties One-Piece 2 in. Extended Dash Style Tank w/Fuel Gauge Bung: Manufacturer part # 011814BX46 - 2 in. extended-length tanks are made from 16-gauge stamped steel. 5.1-gal. capacity. Dash-style design with provisions for mounting stock-style dash and ignition switch (not included). Screw-in cap tank requires the use of 82-E96 gas caps (sold separately). Fuel gauge bungs accept OEM-style or aftermarket fuel gauges. , , NOTE: Seat nose may require modification to fit properly with extended tanks, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011814BX46 1 on hand
$359.95Drag Specialties 2 in. Extended Dash Style Gas Tank w/2 Screw Bungs 012835
Manufacturer: Drag Specialties
Dennis Kirk Part #: 183248
Drag Specialties 2 in. Extended Dash Style Gas Tank w/2 Screw Bungs: Manufacturer part # 012835 - 2" extended-length tanks are made from 16-gauge stamped steel. 5.1 gallon capacity. Dash-style design with provisions for mounting stock-style dash and ignition switch (not included). Screw-in cap tanks require the use of 82-E96 gas caps (sold separately). Uses 22mm petcock. , , NOTE: Seat nose may require modification to fit properly with extended tanks, , NOTE: For Softail models 01-06 with fuel injection and Softail models 04-06 with carb (except FXSTD), , NOTE: Requires the use of petcock adapter OEM NO. 62842-00 or DK Part No. 182865 when used in listed carb applications, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems, , DIMENISIONS: Length: 20-1/2 in.. Width: 17 in.. Tunnel Length 18-3/4 in.. TUNNEL WIDTH: Front: 3-1/16 in.. Rear: 2-3/8 in.. TUNNEL DEPTH: Front: 6-1/2 in.. Rear: 1-1/4 in.. Tank Height: 9-1/4 in.. Fuel Petcock: Rear Left. Petcock thread size: 22mm. Gas cap type: Threaded.. 012835 1 on hand
$352.95Drag Specialties One-Piece 2 in. Extended Smooth-Top Tank with Dual Screw-In Caps 011660BX40
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18532
Drag Specialties One-Piece 2 in. Extended Smooth-Top Tank with Dual Screw-In Caps: Manufacturer part # 011660BX40 - No dummy extension, 4.2 gallon, steel tank if fully functional. Area cut out for the nose of the stock seat. Tank has an arched bottom for that great banana look. Smooth top tank eliminates the dash completely and will require custom mounting of ignition switch, dash lights and speedometer. Tank measures 22 in. L x 16 in. W. Dual screw-in caps are not included and must be purchased separately (use 82-E96 style caps). All necessary hardware included. , NOTE: 96-99 models require the use of pre-96 petcock, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011660BX40 1 on hand
$409.95Drag Specialties One-Piece 2 in. Extended Dash Style Tank 011863BX46
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18875
Drag Specialties One-Piece 2 in. Extended Dash Style Tank: Manufacturer part # 011863BX46 - 2 in. extended-length tank is made from 16-gauge stamped steel. 5.1-gal. capacity. Dash style design with provisions for mounting stock-style dash and ignition switch (not included). Dual screw-in cap tank requires the use of 82-E96 gas caps (sold separately). Fuel gauge bungs accept OEM-style or aftermarket fuel gauges. , , NOTE: Seat nose may require modification to fit properly with extended tanks, , NOTE: For Softail models 01-06 with fuel injection and Softail models 04-06 with carb (except FXSTD), , NOTE: Requires the use of petcock adapter OEM NO. 62842-00 or DK Part No. 182865 when used in listed carb applications, , WARNING: , All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. 011863BX46 1 on hand
$359.95Drag Specialties 2 in. Extended Dash Style Gas Tank w/1 Screw Bung and Dummy Bung for OEM Gas Gauge 012844
Manufacturer: Drag Specialties
Dennis Kirk Part #: 183249
Drag Specialties 2 in. Extended Dash Style Gas Tank w/1 Screw Bung and Dummy Bung for OEM Gas Gauge: Manufacturer part # 012844 - 2" extended-length tanks are made from 16-gauge stamped steel. 5.1 gallon capacity. Available in dash-style design with provisions for mounting stock-style dash and ignition switch (not included). Screw-in cap tanks require the use of 82-E96 gas caps (sold separately). Tanks with fuel gauge bungs accept OEM-style or aftermarket fuel gauges. Uses 22mm petcock. , , NOTE: Seat nose may require modification to fit properly with extended tanks, , NOTE: For Softail models 01-06 with fuel injection and Softail models 04-06 with carb (except FXSTD), , NOTE: Requires the use of petcock adapter OEM NO. 62842-00 or DK Part No. 182865 when used in listed carb applications, , WARNING: , All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems DIMENISIONS: Length: 21 in.. Width: 17 in.. Tunnel Length 18-3/4 in.. TUNNEL WIDTH: Front: 3-1/16 in.. Rear: 2-3/8 in.. TUNNEL DEPTH: Front: 6-1/2 in.. Rear: 1-1/4 in.. Tank Height: 9-1/4 in.. Fuel Petcock: Rear Left. Petcock thread size: 22mm. Gas cap type: Threaded.. 012844 1 on hand
$399.95Drag Specialties One-Piece 2 in. Extended Dash Style Tank 011806BX46
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18867
Drag Specialties One-Piece 2 in. Extended Dash Style Tank: Manufacturer part # 011806BX46 - Standard-length or 2 in. extended-length tanks are made from 16-gauge stamped steel. 5.1-gal. capacity. Available in smooth-top design that eliminate the dash completely (requires custom mounting of gauges, ignition switch and dash lights) and dash-style design with provisions for mounting stock-style dash and ignition switch (not included). Dual screw-in cap tank requires the use of 82-E96 gas caps (sold separately). , , NOTE: Seat nose may require modification to fit properly with extended tanks, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011806BX46 1 on hand
$357.95Drag Specialties One-Piece 2 in. Extended Gas Tank with Dual Screw-In Caps 11619BX46
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18715
Drag Specialties One-Piece 2 in. Extended Gas Tank with Dual Screw-In Caps: Manufacturer part # 11619BX46 - Drag Specialties is an industry-leading dealer-distributor of aftermarket parts and accessories for Harley-Davidson. Two things go hand in hand at Drag: quality and quantity. Smooth-top tank features 2 in. stretch over stock length. Fully functional. No dummy extensions. Screw-in gas caps sold separately (use 82-E96 style). Requires custom gauge mounting. Accept late-style petcock (22mm). No fuel gauge provision. Comes complete with all necessary mounting hardware. 4.2 gallon capacity. , NOTE: , Seat nose may require modification, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 11619BX46 1 on hand
$14.95Harley-Davidson 2-Tone Gold and Two-Tone Burgundy Gas Tank Decal 14164-87
Manufacturer: Harley-Davidson
Dennis Kirk Part #: H52302
Harley-Davidson 2-Tone Gold and Two-Tone Burgundy Gas Tank Decal: Manufacturer part # 14164-87 - For use on either side of tank. Gold and two-tone Burgundy with Red and Orange pinstripe.. 14164-87 7 on hand
$701.99Wild Card One Piece 2 in. Stretched Softail Style Custom Gas Tank 20185
Manufacturer: Wild Card
Dennis Kirk Part #: 183623
Wild Card One Piece 2 in. Stretched Softail Style Custom Gas Tank: Manufacturer part # 20185 - One piece 2 in. stretched Softail style custom gas tank. Fits customer applications, uses pop up style gas cap - not included holds about 4 gallons. No expense was spared in the construction and finish quality of these gas tanks. All visible welds (when mounted on bike) have been finished and polished to give a nice smooth seamless appearance and then phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. The tank is mounted to the frame using either the supplied weld on front and rear brackets, or one of the weld on front brackets and the supplied Softail horse shoe style rear bracket. When the brackets have been installed they mount to the gas tank using a recessed rubber mounting system which isolates it from vibration and gives a nice flush look. Comes with a weld to frame brackets, Softail horse shoe style rear brackets, rubbers and mounting hardware, stainless filler bung, stainless 13/16 in. (22mm) petcock outlet and stainless breather tube. , , Dimensions: , Overall Length: 23.28 in., Tunnel Length: 19.70 in., Seat Pocket: 3.58 in., Tunnel Width: 2.0 in., Overall Width: 16.18 in., Height: 8.19 in., , NOTE: Before painting these steel gas tanks, we recommend that you mount the tank and check all frame and fork clearances. Gas tanks come with custom mountings including weld on mounting brackets/. We recommend a qualified welder mounts the brackets to the frame., NOTE: All gas tanks must be pressure tested, cleaned with tank cleaner and sealer before painting to protect the final finish and prevent internal rusting during winter storage. Always install the gas tank before painting to check fork, triple tree and handlebar control clearances.. 20185 1 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
