$6.75Novus Polish 2 NOVUS NO 2
Manufacturer: Novus
Dennis Kirk Part #: 3186
Novus Polish 2: Manufacturer part # NOVUS NO 2 - Removes scratches in visors, goggle lenses, windshields and plastic body parts. Novus No. 3 - (301300) takes out heavy scratches in Lucite® and Plexiglass® surfaces (use both No. 1 and No. 2 for detail polishing). Novus No. 2 is a medium-duty formula designed to remove fine scratches, abrasions and haziness. After using Novus No. 2 or No. 3, apply Novus No. 1 - (3185) light-duty formula for a clean, highly polished, static- and dust-free surface. 8 oz bottle. , NOTE: Not recommended for Lexan® and some polycarbonate-coated plastics.. NOVUS NO 2 More than 10 on hand
$289.95Vance & Hines 2-into-1 Supersport Round Canister Exhaust System with Glossy Black Header and Polished Aluminum Muffler Sleeve 13332
Manufacturer: Vance & Hines
Dennis Kirk Part #: 441073
Vance & Hines 2-into-1 Supersport Round Canister Exhaust System with Glossy Black Header and Polished Aluminum Muffler Sleeve: Manufacturer part # 13332 - Large diameter, smooth-bend headpipes for maximum exhaust flow with gloss black finish that dissipates heat and fights corrosion. Polished aluminum canister is lightweight with replaceable, re-packable baffle. Machined billet aluminum end cap is a Vance & Hines trademark; includes an adjustable tip of polished stainless steel. Three-piece design features quick-release, spring mounted canister and middle section. Standard Supersport baffle. Carburetor re-jetting is recommended for maximum performance, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 13332 3 on hand
$389.95Vance & Hines 4-into-2-into-1 Supersport Round Canister Exhaust System with Glossy Black Header and Polished Aluminum Muffler Sleeve 14302
Manufacturer: Vance & Hines
Dennis Kirk Part #: 441074
Vance & Hines 4-into-2-into-1 Supersport Round Canister Exhaust System with Glossy Black Header and Polished Aluminum Muffler Sleeve: Manufacturer part # 14302 - Large diameter, smooth-bend headpipes for maximum exhaust flow with gloss black finish that dissipates heat and fights corrosion. Polished aluminum canister is lightweight with replaceable, re-packable baffle. Machined billet aluminum end cap is a Vance & Hines trademark; includes an adjustable tip of polished stainless steel. Three-piece design features quick-release, spring mounted canister and middle section. Standard Supersport baffle. This system is 4-2-1 design. Carburetor re-jetting is recommended for maximum performance, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 14302 1 on hand
CLEARANCE!
Was: $519.99
Now: $389.99
Jardine 16 Series 4-2-1 Black Header W/Polished Aluminum Canister Complete Exhaust System 16-4501-03
Manufacturer: Jardine
Dennis Kirk Part #: 440409
Jardine 16 Series 4-2-1 Black Header W/Polished Aluminum Canister Complete Exhaust System: Manufacturer part # 16-4501-03 - High-performance looks and sound with a horsepower boost. Brilliantly polished aluminum canisters with stainless steel hardware. Fiberglass-packed, removable baffle canister(s). Retain all convenience features, including centerstand, oil filter and drain plug access. All single-muffler systems are right-side exit. Carburetor re-jetting may be desired for best performance, , Optional interchangeable tips available for customized look , Shark Fin 2-1/2" - Part No. 449703, Cadillac 2-1/2" - Part No. 449704, Slash 4" - Part No. 449702, Standard Replacement Tips 2-1/2" - Part No. 449705, ,. Optional quiet and performance cores also available , Quiet Core - Part No. 449686, Performance Core - Part No. 449688, ,. Manifold exhaust gaskets are not included , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product., , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 16-4501-03 1 on hand
$664.99Yoshimura 2-Into-1 Tri-Oval TRS Stainless Steel Race System with Stainless Steel Header Pipe and Muffler Sleeve 1112065
Manufacturer: Yoshimura
Dennis Kirk Part #: 4400530
Yoshimura 2-Into-1 Tri-Oval TRS Stainless Steel Race System with Stainless Steel Header Pipe and Muffler Sleeve: Manufacturer part # 1112065 - The latest in exhaust design and high performance for your sportbike. Tested and developed with three-time AMA Superbike Champion Mat Mladin. Tri-oval muffler shape for maximum cornering clearance, unique looks and a distinctive sound. Stainless steel header pipe construction with tapered, quick-release Duplex headers. Header pipes are electro-polished for the ultimate high-luster finish. Baffle is large 2.25" race stainless steel design. INCLUDED ITEMS: , (1) Front header, (1) Rear header, (1) Tailpipe, (1) TRS muffler assembly, (1) Stainless steel muffler clamp, (1) 8mm washer-large, (1) 8mm flange nut, (1) Header collector clamp, (4) 2.5 in. race springs, (2) 3 in. race springs, (1) Muffler clamp heat insulator, (1) Spring puller tool, (2) Vinyl stickers, (1) Instruction sheet. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1112065 1 on hand
$1214.99Yoshimura 4-Into-2 Tri-Oval Race Stainless Steel System with Stainless Steel Header Pipe and Dual Stainless Steel Muffler Sleeves 1312065
Manufacturer: Yoshimura
Dennis Kirk Part #: 4400522
Yoshimura 4-Into-2 Tri-Oval Race Stainless Steel System with Stainless Steel Header Pipe and Dual Stainless Steel Muffler Sleeves: Manufacturer part # 1312065 - The latest in exhaust design and high performance for your sportbike. Tested and developed with three-time AMA Superbike Champion Mat Mladin. Tri-oval muffler shape for maximum cornering clearance, unique looks and a distinctive sound. Stainless steel header pipe construction with tapered, quick-release Duplex headers. Header pipes are electro-polished for the ultimate high-luster finish. Baffle is large 2 1/4 in. race stainless steel design. INCLUDED ITEMS: One header. Four stainless steel exhaust manifold. Four stainless steel exhaust flange. One tailpipe collector. One tailpipe left side. One tailpipe right side. One TRS stainless steel muffler clamp. One 8mm flange nut. Twenty 1.5 in. race springs. Two muffler clamp heat insulators. One spring puller tool. Two duplex sticker. One heat shield. Two heat shield bolts. Two stock heat shield spacers. Two stock heat shield bolts. Two stock heat shield washers. One instruction sheet. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1312065 1 on hand
$199.99Carlini One-Piece Risers for 1 1/2 in. Hoghandles HHR-2
Manufacturer: Carlini
Dennis Kirk Part #: H59919
Carlini One-Piece Risers for 1 1/2 in. Hoghandles: Manufacturer part # HHR-2 - For Hoghandle Bars, Part No. H59913 and H59914. HHR-2 1 on hand
$18.95Sport Parts Inc. 2 in. Handlebar Riser SM-08078-2
Manufacturer: Sport Parts Inc.
Dennis Kirk Part #: 592879
Sport Parts Inc. 2 in. Handlebar Riser: Manufacturer part # SM-08078-2 - Black extruded 6061 T-6 aluminum risers. Include riser, four nuts and four bolts. Throttle cable extensions kit (sold separately) allows up 10" of additional reach, Part No. 194404. SM-08078-2 More than 10 on hand
$23.95Sport Parts Inc. 2 in. Pivot Riser Block SM-08112-2
Manufacturer: Sport Parts Inc.
Dennis Kirk Part #: 593307
Sport Parts Inc. 2 in. Pivot Riser Block : Manufacturer part # SM-08112-2 - CNC-machined 6061 T-6 aluminum with black anodized finish. When combined with pivot adapter for riser blocks you get high strength and maximum adjustability. Pivot style adapter is sold separately from risers (order 59-3306) Throttle cable extension kit (sold separately)allows up to 10" of additional reach, Part No. 194404. SM-08112-2 4 on hand
$23.95Sport Parts Inc. 2 in. Pivot Riser Block SM-08111-2
Manufacturer: Sport Parts Inc.
Dennis Kirk Part #: 593302
Sport Parts Inc. 2 in. Pivot Riser Block: Manufacturer part # SM-08111-2 - CNC-machined 6061 T-6 aluminum with black anodized finish. When combined with pivot adapter for riser blocks you get high strength and maximum adjustability. Pivot style adapter is sold separately from risers (order 59-3301) Throttle cable extension kit (sold separately) allows up to 10" of additional reach, Part No. 194404. SM-08111-2 6 on hand
$23.95Sport Parts Inc. 2 in. Pivot Riser Block SM-08110-2
Manufacturer: Sport Parts Inc.
Dennis Kirk Part #: 593297
Sport Parts Inc. 2 in. Pivot Riser Block : Manufacturer part # SM-08110-2 - CNC-machined 6061 T-6 aluminum with black anodized finish. When combined with pivot adapter for riser blocks you get high strength and maximum adjustability. Pivot style adapter is sold separately from risers. Throttle cable extension kit (sold separately) allows up to 10" of additional reach, Part No. 194404, , ARCTIC CAT ZR/FIRECAT/SABERCAT MODELS 00-07 Must use adapter kit, Part No. 593296 YAMAHA MODELS 97-07 Must use adapter kit, Part No. 593295. SM-08110-2 6 on hand
$556.99Hooker Headers Long Side Slash Cut 2 1/2 in. Rebel Chrome Drag Pipe Exhaust System p4401189
Manufacturer: Hooker Headers
Dennis Kirk Part #: 4401189
Hooker Headers Long Side Slash Cut 2 1/2 in. Rebel Chrome Drag Pipe Exhaust System: Manufacturer part # p4401189 - Increased top-end horsepower from a stepped, internal headpipe design that doesn't sacrifice low-end torque. Increased horsepower is from the metallic ceramic coating on the internal headpipes that retain heat, thus creating more exhaust velocity. The "Big Tube" 2 1/2 in. outer pipe shows no visible sign of blueing and includes a baffle to provide a deep rumble. Replacement baffle also available (Part No.44-01690). Includes detailed instructions, bolts, nuts, machined brackets, chromed flange, C-clips and exhaust gaskets. For models listed with 96+ in. engines , NOTES: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing, , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. p4401189 1 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
