2 Front

$81.99 Maxxis M933 RAZR 2 Front Tire M933 RAZR2
Manufacturer: Maxxis
Dennis Kirk Part #: 541652
Maxxis M933 RAZR 2 Front Tire: Manufacturer part # M933 RAZR2 - Delivers exceptional handling and control on a variety of surfaces. Features an aggressive, high-performance tread pattern and a special shoulder knob profile for optimal side bite. Deep tread offers superior straight-line grip. Attractive raised yellow letter sidewall. Tube or tubeless. M933 RAZR2
7 on hand

More Info/Options for Maxxis M933 RAZR 2 Front Tire M933 RAZR2

2 Front

$87.99 Maxxis M933 RAZR 2 Front Tire M933 RAZR2 541653
Manufacturer: Maxxis
Dennis Kirk Part #: 541653
Maxxis M933 RAZR 2 Front Tire: Manufacturer part # M933 RAZR2 - DennisKirk Part # 541653 - Delivers exceptional handling and control on a variety of surfaces. Features an aggressive, high-performance tread pattern and a special shoulder knob profile for optimal side bite. Deep tread offers superior straight-line grip. Attractive raised yellow letter sidewall.. M933 RAZR2
4 on hand

More Info/Options for Maxxis M933 RAZR 2 Front Tire M933 RAZR2 541653

2 Front

$88.99 Maxxis M933 RAZR 2 Front Tire M933 RAZR2 541654
Manufacturer: Maxxis
Dennis Kirk Part #: 541654
Maxxis M933 RAZR 2 Front Tire: Manufacturer part # M933 RAZR2 - DennisKirk Part # 541654 - Delivers exceptional handling and control on a variety of surfaces. Features an aggressive, high-performance tread pattern and a special shoulder knob profile for optimal side bite. Deep tread offers superior straight-line grip. Attractive raised yellow letter sidewall.. M933 RAZR2
1 on hand

More Info/Options for Maxxis M933 RAZR 2 Front Tire M933 RAZR2 541654

2 Front

$214.99 Russ Wernimont Designs 4 1/2. Wide Pointed Flare Front Fender 14010172
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 392797
Russ Wernimont Designs 4 1/2. Wide Pointed Flare Front Fender: Manufacturer part # 14010172 - Directly bolt onto Softail fender mounts (6 7/8in. wide). No spacers required. Pre-drilled horizontal bolt pattern. Fits a 90/90 tire with a 21in. wheel. NOTE: Fender must be prefitted before painting.. 14010172
1 on hand

More Info/Options for Russ Wernimont Designs 4 1/2. Wide Pointed Flare Front Fender 14010172

2 Front

$214.99 Russ Wernimont Designs 5 1/2. Wide Flared Long Front Fender p393089
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 393089
Russ Wernimont Designs 5 1/2. Wide Flared Long Front Fender: Manufacturer part # p393089 - Directly bolt onto Softail fender mounts (6 7/8" wide). No spacers required. Horizontal bolt pattern; predrilled. For 23 in. wheel. , , NOTE: All fenders must be prefitted before painting, , Dimensions , Inside width at mounting point 6 11/16 in.. Outside width at mounting point 6 13/16 in.. Contour length 47 3/8 in.. Straight length 30 1/4 in.. Height 15 1/4 in.. p393089
1 on hand

More Info/Options for Russ Wernimont Designs 5 1/2. Wide Flared Long Front Fender p393089

2 Front

$214.99 Russ Wernimont Designs 6.25 in. Wide Wernimont Custom Duster Front Fenders for 16 in. Wheels, 40 1/2 in. Length DS-380276
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: H39609
Russ Wernimont Designs 6.25 in. Wide Wernimont Custom Duster Front Fenders for 16 in. Wheels, 40 1/2 in. Length: Manufacturer part # DS-380276 - Stylish and sturdy, these beautiful fenders are made of heavy-gauge steel. Built by craftsmen with an absolute minimum of finishing bodywork. A master fender builder inspects each fender to ensure straightness, consistency and flawless finish. Fenders come undrilled so you can position it to look and work best for your Application. Handmade in the U.S.A.. NOTE: Fender must be prefitted before painting.. DS-380276
1 on hand

More Info/Options for Russ Wernimont Designs 6.25 in. Wide Wernimont Custom Duster Front Fenders for 16 in. Wheels, 40 1/2 in. Length DS-380276

2 Front

$214.99 Russ Wernimont Designs 6.25 in. Wide Wernimont Long Shot Custom Front Fenders for 16 in. Wheels, 37 1/2 in. Length DS-380372
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: H39602
Russ Wernimont Designs 6.25 in. Wide Wernimont Long Shot Custom Front Fenders for 16 in. Wheels, 37 1/2 in. Length: Manufacturer part # DS-380372 - Stylish and sturdy, these beautiful fenders are made of heavy-gauge steel. Built by craftsmen with an absolute minimum of finishing bodywork. A master fender builder inspects each fender to ensure straightness, consistency and flawless finish. Fenders come undrilled so you can position it to look and work best for your Application. Handmade in the U.S.A.. NOTE: Fender must be prefitted before painting.. DS-380372
1 on hand

More Info/Options for Russ Wernimont Designs 6.25 in. Wide Wernimont Long Shot Custom Front Fenders for 16 in. Wheels, 37 1/2 in. Length DS-380372

2 Front

$214.99 Russ Wernimont Designs 6.25 in. Wernimont Custom Gambler Front Fenders for 16 in. Wheels, 31 1/2 in. Length DS-380333
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: H39612
Russ Wernimont Designs 6.25 in. Wernimont Custom Gambler Front Fenders for 16 in. Wheels, 31 1/2 in. Length: Manufacturer part # DS-380333 - Stylish and sturdy, these beautiful fenders are made of heavy-gauge steel. Built by craftsmen with an absolute minimum of finishing bodywork. A master fender builder inspects each fender to ensure straightness, consistency and flawless finish. Fenders come undrilled so you can position it to look and work best for your Application. Handmade in the U.S.A.. NOTE: Fender must be prefitted before painting.. DS-380333
2 on hand

More Info/Options for Russ Wernimont Designs 6.25 in. Wernimont Custom Gambler Front Fenders for 16 in. Wheels, 31 1/2 in. Length DS-380333

2 Front

$150.99 Arlen Ness 4 1/2 in. Narrow Frontdragger Fender for Use With 19 in. or 21 in. Front Wheels 06-187
Manufacturer: Arlen Ness
Dennis Kirk Part #: H39019
Arlen Ness 4 1/2 in. Narrow Frontdragger Fender for Use With 19 in. or 21 in. Front Wheels: Manufacturer part # 06-187 - A popular fiberglass fender design that is made to match Taildragger fenders. Made in the U.S.A.. Note: Fender must be prefitted before painting.. 06-187
2 on hand

More Info/Options for Arlen Ness 4 1/2 in. Narrow Frontdragger Fender for Use With 19 in. or 21 in. Front Wheels 06-187

2 Front

$173.95 Drag Specialties 6 1/2 in. Quickbob Steel Front Fender 090203PBLB2
Manufacturer: Drag Specialties
Dennis Kirk Part #: H39432
Drag Specialties 6 1/2 in. Quickbob Steel Front Fender: Manufacturer part # 090203PBLB2 - Bolt on some nostalgic style. Steel fenders fit listed models with a 21 in. front rim and tire, , Note: Fender must be prefitted before painting. 090203PBLB2
2 on hand

More Info/Options for Drag Specialties 6 1/2 in. Quickbob Steel Front Fender 090203PBLB2

2 Front

$606.99 GMA Engineering Custom Billet Aluminum Front Brake Caliper 200FDD
Manufacturer: GMA Engineering
Dennis Kirk Part #: 198135
GMA Engineering Custom Billet Aluminum Front Brake Caliper: Manufacturer part # 200FDD - Billet aluminum dual-disc caliper set with a fin design and a satin finish. Require the factory 11/16 in. bore (84 and later) or the GMA 3/4 in. handlebar master cylinder. Brake pads included. Made in the U.S.A.. NOTE: Not recommended for use with imported stainless steel rotors NOTE: When installing new calipers, always check spoke-to-caliper clearance. 200FDD
1 on hand

More Info/Options for GMA Engineering Custom Billet Aluminum Front Brake Caliper 200FDD

2 Front

$303.99 GMA Engineering Billet Aluminum Front Brake Caliper, Sold Each GMA200F
Manufacturer: GMA Engineering
Dennis Kirk Part #: H191681
GMA Engineering Billet Aluminum Front Brake Caliper, Sold Each: Manufacturer part # GMA200F - Clear anodized billet aluminum construction with fin design. Chrome finish available in some styles. Calipers available in 2- or 4-piston designs for various H-D models (including rigid frames). 5/8" bore master cylinder required for all GMA single-disc applications using a 2- or 4-piston caliper. Factory 11/16" bore (1984 & later) or GMA 3/4" handlebar master cylinder required for all front dual-disc applications using a 2- or 4-piston caliper. Brake pads included. Made in the U.S.A.. , NOTE: The old style Wagner and Kelsey-Hayes (die cast aluminum OEM) on rear applications have a 3/4" bore master cylinder and WILL NOT WORK CORRECTLY., NOTE: Not recommended for use with imported stainless steel rotors., NOTE: When installing new calipers, always check spoke-to-caliper clearance.. GMA200F
2 on hand

More Info/Options for GMA Engineering Billet Aluminum Front Brake Caliper, Sold Each GMA200F

2 Front

2 Front