$281.99Crane Cams HTC-316-2 Chain Drive Performance Cam 13002GD
Manufacturer: Crane Cams
Dennis Kirk Part #: 149915
Crane Cams HTC-316-2 Chain Drive Performance Cam: Manufacturer part # 13002GD - Computer-controlled designs for lobe-to-lobe cam profile accuracy. Applications for mild street engines to full-on high-performance big bore motors. , NOTE: All cams require the use of 1999-2004 style valves, seals, valve guides and spring kits, , HTC-316-2 Street Performance , Can be used with stock compression but works best with 10.1:1 or high compression, performance air cleaner and performance exhaust. Uses stock valve springs. Range: 1800-5800 RPM. , , Specs: , Intake, Open: 19 degrees, Close: 48 degrees, Duration at .053: 242 degrees, Valve Lift: .505 in., , Exhaust, Open: 43 degrees, Close: 24 degrees, Duration at .053: 252 degrees, Valve Lift: .505 in.. 13002GD 1 on hand
$281.99Crane Cams HTC-310-2 Chain Drive Performance Cam 13001GD
Manufacturer: Crane Cams
Dennis Kirk Part #: 149914
Crane Cams HTC-310-2 Chain Drive Performance Cam: Manufacturer part # 13001GD - Computer-controlled designs for lobe-to-lobe cam profile accuracy. Applications for mild street engines to full-on high-performance big bore motors. , NOTE: All cams require the use of 1999-2004 style valves, seals, valve guides and spring kits, , HTC-310-2 Moderate Street/Cruising , Gives a nice performance gain; ideal for single-rider machines. Works with stock compression or up to 9.5:1 ratio. Uses stock valve springs. Best gains when used with performance exhaust and performance air cleaner. Range: 1500-5500 RPM. , , Specs: , Intake, Open: 20 degrees, Close: 47 degrees, Duration at .053: 236 degrees, Valve Lift: .505 in., , Exhaust, Open: 36 degrees, Close: 15 degrees, Duration at .053: 242 degrees, Valve Lift: .505 in.. 13001GD 1 on hand
$281.99Crane Cams HTC-290-2 Chain Drive Performance Cam 13003GD
Manufacturer: Crane Cams
Dennis Kirk Part #: 149916
Crane Cams HTC-290-2 Chain Drive Performance Cam: Manufacturer part # 13003GD - Computer-controlled designs for lobe-to-lobe cam profile accuracy. Applications for mild street engines to full-on high-performance big bore motors. , NOTE: All cams require the use of 1999-2004 style valves, seals, valve guides and spring kits, , HTC-290-2 Hot Street , For use with stock or big-bore kits up to 103 cubic inches. Best power with 9.5:1 compression, headwork, performance air cleaner and free-flowing exhaust. Strong low-end and mid-range torque with added high RPM power. .570 in. lift range: 1500-5000 RPM. , , Specs: , Intake, Open: 18 degrees, Close: 46 degrees, Duration at .053: 240 degrees, Valve Lift: .570 in., , Exhaust, Open:42 degrees, Close: 22 degrees, Duration at .053: 248 degrees, Valve Lift: .570 in.. 13003GD 1 on hand
$281.99Crane Cams HTC-304-2 Chain Drive Performance Cam 13004GD
Manufacturer: Crane Cams
Dennis Kirk Part #: 149917
Crane Cams HTC-304-2 Chain Drive Performance Cam: Manufacturer part # 13004GD - Computer-controlled designs for lobe-to-lobe cam profile accuracy. Applications for mild street engines to full-on high-performance big bore motors. , NOTE: All cams require the use of 1999-2004 style valves, seals, valve guides and spring kits, , HTC-304-2 Max Hot Street , For modified engines with 10.5:1 and up compression, big-bore kits; headwork performance air cleaner and performance exhaust. Strong mid-range torque with upper RPM power. .600 in. lift range: 2000-6000 RPM. , Specs: , Intake, Open: 25 degrees, Close: 56 degrees, Duration at .053: 254 degrees, Valve Lift: .600 in., , Exhaust, Open: 49 degrees, Close: 24 degrees, Duration at .053: 260 degrees, Valve Lift: .600 in.. 13004GD 1 on hand
$281.99Crane Cams HTC-300-2 Chain Drive Performance Cam 1300CL
Manufacturer: Crane Cams
Dennis Kirk Part #: 149913
Crane Cams HTC-300-2 Chain Drive Performance Cam: Manufacturer part # 1300CL - Computer-controlled designs for lobe-to-lobe cam profile accuracy. Applications for mild street engines to full-on high-performance big bore motors. , NOTE: All cams require the use of 1999-2004 style valves, seals, valve guides and spring kits, , HTC-300-2 Mild Street/Cruising/Touring , Ideal cam for use with heavier machines. For use with stock compression ratio; makes best power with a performance air cleaner and performance exhaust. Uses stock valve springs. Range: Idle to 5000 RPM. , , Specs: , Intake, Open: 13 degrees, Close: 42 degrees, Duration at .053: 226 degrees, Valve lift: .505 in., , Exhaust, Open: 33 degrees, Close: 14 degrees, Duration at .053: 236 degrees, Valve lift: .505 in.. 1300CL 1 on hand
$307.95Crane Cams 300-2 Chain Drive Street Performance Cam 13000
Manufacturer: Crane Cams
Dennis Kirk Part #: 140280
Crane Cams 300-2 Chain Drive Street Performance Cam: Manufacturer part # 13000 - Crane Cams explosive dyno proven HP, torque RPM and reliability now available for Twin-Cam 88 engines. Computer-designed hydraulic cams available for mild street/cruising to killer, race engine build-ups. Lobe-to-lobe cam profile accuracy for off-idle torque to high-rpm horsepower. , , 300-2 Hydraulic - Mild Street, Cruising Touring , Great low-end and mid-range power from a bolt-in camshaft. Use in heavier bikes with performance air cleaner and exhaust, stock compression ratio. Can be used with stock valve springs. Power range from idle to 5000 rpm. , , NOTE: All cams are made for 1999 and up Twin Cam 88 in. engines. All cams are made for splined cam sprocket, 2000 models and later can use stock gear and bolt assembly. Use rear cam roller bearing assembly HD #8983. , , Intake , Duration @ .053 in.: 226 degree, Open: 13 degree, Close: 33 degree, Valve Lift: .505 in., , Exhaust: , Duration @ .053 in.: 236 degree, Open: 42 degree, Close: 14 degree, Valve Lift: .505 in.. , , RPM Range: Idle - 5,000.. 13000 1 on hand
$307.95Crane Cams 310-2 Chain Drive Street Performance Cam 13001
Manufacturer: Crane Cams
Dennis Kirk Part #: 140282
Crane Cams 310-2 Chain Drive Street Performance Cam: Manufacturer part # 13001 - Crane Cams explosive dyno proven HP, torque RPM and reliability now available for Twin-Cam 88 engines. Computer-designed hydraulic cams available for mild street/cruising to killer, race engine build-ups. Lobe-to-lobe cam profile accuracy for off-idle torque to high-rpm horsepower. , , 310-2 Hydraulic - Moderate Street, Cruising , Strong low-end and mid-range power in a bolt-in camshaft. Ideal for use with Dynas, Softails, or single riders. Designed to work best with performance air cleaner and exhaust and a compression ratio from stock to 9.5. Can be used with stock valve springs. Power range from 1500 to 5500 rpm. , , Intake , Duration @ .053: 236 degree, Valve Lift: .505, Open: 20 degree, Close: 36 degree, , Exhaust , Duration @ .053: 242 degree, Valve lift: .505, Open: 47 degree, Close: 15 degree, , RPM Range: 1,500 to 5,500. 13001 1 on hand
$307.95Crane Cams 316-2 Chain Drive Street Performance Cam 13002
Manufacturer: Crane Cams
Dennis Kirk Part #: 140285
Crane Cams 316-2 Chain Drive Street Performance Cam: Manufacturer part # 13002 - Crane Cams explosive dyno proven HP, torque RPM and reliability now available for Twin-Cam 88 engines. Computer-designed hydraulic cams available for mild street/cruising to killer, race engine build-ups. Lobe-to-lobe cam profile accuracy for off-idle torque to high-rpm horsepower. , , 316-2 Hydraulic - Street Performance , Recommended for use with 10.1 compression ratio; bolt-in camshaft. Gets best results when used with performance air cleaner and exhaust. Can be used with stock valve springs. Power range from 1800 to 5800 rpm. , , Intake , Duration @ .053: 242 degree, Valve Lift: .505, Open: 19 degree, Close: 43 degree, , Exhaust , Duration @ .053: 252 degree, Valve lift: .505, Open: 48 degree, Close: 24 degree, , RPM Range: 1,800 to 5,800. 13002 1 on hand
$307.95Crane Cams 290-2 Chain Drive Street Performance Cam 13003
Manufacturer: Crane Cams
Dennis Kirk Part #: 140288
Crane Cams 290-2 Chain Drive Street Performance Cam: Manufacturer part # 13003 - Crane Cams explosive dyno proven HP, torque RPM and reliability now available for Twin-Cam 88 engines. Computer-designed hydraulic cams available for mild street/cruising to killer, race engine build-ups. Lobe-to-lobe cam profile accuracy for off-idle torque to high-rpm horsepower. , , 290-2 Hydraulic - Hot Street Performance , Generates great mid-range and upper end power. Use with stock engines or kits up to 95 cu. in.. Makes optimum power with 9.5 compression ratio and modified heads. Must use with performance air cleaner, performance exhaust and Crane valve springs set up for .570 in. lift. Power range from 1800 to 5800 rpm. , , Intake , Duration @ .053: 240 degree, Valve Lift: .570, Open: 18 degree, Close: 42 degree, , Exhaust , Duration @ .053: 248 degree, Valve lift: .570, Open: 46 degree, Close: 22 degree, , RPM range: 1,800 to 5,800. 13003 1 on hand
$430.95Crane Cams 290-2 Chain Drive Street Performance Cam w/Lifters 13003CL
Manufacturer: Crane Cams
Dennis Kirk Part #: 140289
Crane Cams 290-2 Chain Drive Street Performance Cam w/Lifters: Manufacturer part # 13003CL - Crane Cams explosive dyno proven HP, torque RPM and reliability now available for Twin-Cam 88 engines. Computer-designed hydraulic cams available for mild street/cruising to killer, race engine build-ups. Lobe-to-lobe cam profile accuracy for off-idle torque to high-rpm horsepower. , , 290-2 Hydraulic - Hot Street Performance , Generates great mid-range and upper end power. Use with stock engines or kits up to 95 cu. in.. Makes optimum power with 9.5 compression ratio and modified heads. Must use with performance air cleaner, performance exhaust and Crane valve springs set up for .570 in. lift. Power range from 1800 to 5800 rpm. , , Intake , Duration @ .053: 240 degree, Valve Lift: .570, Open: 18 degree, Close: 42 degree, , Exhaust , Duration @ .053: 248 degree, Valve lift: .570, Open: 46 degree, Close: 22 degree, , RPM range: 1,800 to 5,800. 13003CL 1 on hand
$307.95Crane Cams 304-2 Chain Drive Street Performance Cam 13004
Manufacturer: Crane Cams
Dennis Kirk Part #: 140291
Crane Cams 304-2 Chain Drive Street Performance Cam: Manufacturer part # 13004 - Crane Cams explosive dyno proven HP, torque RPM and reliability now available for Twin-Cam 88 engines. Computer-designed hydraulic cams available for mild street/cruising to killer, race engine build-ups. Lobe-to-lobe cam profile accuracy for off-idle torque to high-rpm horsepower. , , 304-2 Hydraulic - Max Hot Street , Great upper-end power and strong mid-range torque. Works best in modified engines with 10.5 compression, big bore kits and head work. Must use performance air cleaner, performance exhaust and Crane valve springs set up for .700 in. travel. Power range from 2000 to 6200 rpm. , , NOTE: All cams are made for 1999 and up Twin Cam 88 in. engines. All cams are made for splined cam sprocket, 2000 models and later can use stock gear and bolt assembly. Use rear cam roller bearing assembly HD #8983. , , Intake , Duration @ .053 in.: 254 degree, Open: 25 degree, Close: 49 degree, Valve Lift: .600 in., , Exhaust: , Duration @ .053 in.: 260 degree, Open: 56 degree, Close: 24 degree, Valve Lift: .600 in.. , , RPM Range: 2,000 - 6,200.. 13004 1 on hand
$307.95Crane Cams 296-2 Chain Drive Street Performance Cam 13005
Manufacturer: Crane Cams
Dennis Kirk Part #: 140294
Crane Cams 296-2 Chain Drive Street Performance Cam: Manufacturer part # 13005 - Crane Cams explosive dyno proven HP, torque RPM and reliability now available for Twin-Cam 88 engines. Computer-designed hydraulic cams available for mild street/cruising to killer, race engine build-ups. Lobe-to-lobe cam profile accuracy for off-idle torque to high-rpm horsepower. , , Hot Street Performance, Modified , For modified engines with 10.25:1-up compression, big bore kits, head mods. Must use Crane valve springs, clearanced for .600 in. lift. Must use performance air cleaner and exhaust. Designed for use with Edelbrock Performer RPM Twin Cam cylinder heads. , , NOTE: All cams are made for 1999 and up Twin Cam 88 in. engines. All cams are made for splined cam sprocket, 2000 models and later can use stock gear and bolt assembly. Use rear cam roller bearing assembly HD #8983. , , Intake , Duration @ .053 in.: 246 degree, Open: 20 degree, Close: 46 degree, Valve Lift: .619 in., , Exhaust: , Duration @ .053 in.: 254 degree, Open: 52 degree, Close: 22 degree, Valve Lift: .619 in.. , , RPM Range: 2,000 - 6,000.. 13005 1 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
