$30.99K & S Round Number 2 Aluminum Marker Lights 258331
Manufacturer: K & S
Dennis Kirk Part #: 210498
K & S Round Number 2 Aluminum Marker Lights: Manufacturer part # 258331 - Aluminum round number 2 with clear lens, single filament bulb K&S marker lights in distinctive styles. Sold in pairs. Overall length: 3 3/8". Lens size: 1 3/8" o.d.. Stud: 5/16". 258331 1 on hand
$28.99K & S Round Number 2 Aluminum Marker Lights 258330
Manufacturer: K & S
Dennis Kirk Part #: 210497
K & S Round Number 2 Aluminum Marker Lights: Manufacturer part # 258330 - Aluminum round number 2 with amber lens, single filament bulb K&S marker lights in distinctive styles. Sold in pairs. Overall length: 3 3/8". Lens size: 1 3/8" o.d.. Stud: 5/16". 258330 1 on hand
$296.99GMA Engineering Custom Billet Aluminum Rear 2-Piston Brake Caliper GMA115
Manufacturer: GMA Engineering
Dennis Kirk Part #: H191673
GMA Engineering Custom Billet Aluminum Rear 2-Piston Brake Caliper: Manufacturer part # GMA115 - Beautiful and functional. Superb billet aluminum design with a clear anodized finish. Hanger brackets and hardware included. 2- and 4-piston calipers fit a wide variety of H-D models (including rigid frames). Brake pads are included. Made in the U.S.A.. , NOTE: Not recommended for use with imported stainless steel rotors., NOTE: For replacement rear brake pads use:, 1900462 - GMA pads (set of 2), 193135 - SBS pads (set of 2), H19847 or 191610 - DP pads (set of 2). GMA115 1 on hand
$296.99GMA Engineering Custom Billet Aluminum Rear Brake 2-Piston Caliper GMAR10CC
Manufacturer: GMA Engineering
Dennis Kirk Part #: 1900459
GMA Engineering Custom Billet Aluminum Rear Brake 2-Piston Caliper: Manufacturer part # GMAR10CC - Beautiful and functional. Fits all rigid frames with 10" rotor. Superb billet aluminum design with a clear anodized finish. Hanger brackets and hardware included. 2- and 4-piston calipers fit a wide variety of H-D models (including rigid frames). Includes correct axle spacer, anti-rotation anchor arm, mounting bracket and hardware. Brake pads are also included. Made in the U.S.A.. , NOTE: Not recommended for use with imported stainless steel rotors., NOTE: For rigid frames with 10 in. rotor, NOTE: For replacement rear brake pads use:, 1900462 - GMA pads (set of 2), 193135 - SBS pads (set of 2), H19847 or 191610 - DP pads (set of 2). GMAR10CC 1 on hand
$309.99GMA Engineering Custom Billet Aluminum Rear 2-Piston Brake Caliper GMA103SA
Manufacturer: GMA Engineering
Dennis Kirk Part #: H191672
GMA Engineering Custom Billet Aluminum Rear 2-Piston Brake Caliper: Manufacturer part # GMA103SA - Beautiful and functional. Superb billet aluminum design with a clear anodized finish. Hanger brackets and hardware included. 2- and 4-piston calipers fit a wide variety of H-D models (including rigid frames). Brake pads are included. Made in the U.S.A.. , NOTE: Not recommended for use with imported stainless steel rotors., NOTE: For replacement rear brake pads use:, 1900462 - GMA pads (set of 2), 193135 - SBS pads (set of 2), H19847 or 191610 - DP pads (set of 2). GMA103SA 1 on hand
$6.75Novus Polish 2 NOVUS NO 2
Manufacturer: Novus
Dennis Kirk Part #: 3186
Novus Polish 2: Manufacturer part # NOVUS NO 2 - Removes scratches in visors, goggle lenses, windshields and plastic body parts. Novus No. 3 - (301300) takes out heavy scratches in Lucite® and Plexiglass® surfaces (use both No. 1 and No. 2 for detail polishing). Novus No. 2 is a medium-duty formula designed to remove fine scratches, abrasions and haziness. After using Novus No. 2 or No. 3, apply Novus No. 1 - (3185) light-duty formula for a clean, highly polished, static- and dust-free surface. 8 oz bottle. , NOTE: Not recommended for Lexan® and some polycarbonate-coated plastics.. NOVUS NO 2 More than 10 on hand
$289.95Vance & Hines 2-into-1 Supersport Round Canister Exhaust System with Glossy Black Header and Polished Aluminum Muffler Sleeve 13332
Manufacturer: Vance & Hines
Dennis Kirk Part #: 441073
Vance & Hines 2-into-1 Supersport Round Canister Exhaust System with Glossy Black Header and Polished Aluminum Muffler Sleeve: Manufacturer part # 13332 - Large diameter, smooth-bend headpipes for maximum exhaust flow with gloss black finish that dissipates heat and fights corrosion. Polished aluminum canister is lightweight with replaceable, re-packable baffle. Machined billet aluminum end cap is a Vance & Hines trademark; includes an adjustable tip of polished stainless steel. Three-piece design features quick-release, spring mounted canister and middle section. Standard Supersport baffle. Carburetor re-jetting is recommended for maximum performance, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 13332 3 on hand
$389.95Vance & Hines 4-into-2-into-1 Supersport Round Canister Exhaust System with Glossy Black Header and Polished Aluminum Muffler Sleeve 14302
Manufacturer: Vance & Hines
Dennis Kirk Part #: 441074
Vance & Hines 4-into-2-into-1 Supersport Round Canister Exhaust System with Glossy Black Header and Polished Aluminum Muffler Sleeve: Manufacturer part # 14302 - Large diameter, smooth-bend headpipes for maximum exhaust flow with gloss black finish that dissipates heat and fights corrosion. Polished aluminum canister is lightweight with replaceable, re-packable baffle. Machined billet aluminum end cap is a Vance & Hines trademark; includes an adjustable tip of polished stainless steel. Three-piece design features quick-release, spring mounted canister and middle section. Standard Supersport baffle. This system is 4-2-1 design. Carburetor re-jetting is recommended for maximum performance, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 14302 1 on hand
$389.95Vance & Hines S4-Supersport Oval 2-into-1 Exhaust System W/Aluminum Muffler Sleeve 32513
Manufacturer: Vance & Hines
Dennis Kirk Part #: 445721
Vance & Hines S4-Supersport Oval 2-into-1 Exhaust System W/Aluminum Muffler Sleeve: Manufacturer part # 32513 - The latest in performance exhaust systems from Vance & Hines. Features easy-to-maintain stainless steel inlet pipe and aluminum silencer body; without unsightly spring connections. A direct descendant of the best selling performance exhaust in the industry, the SS2-R, which means maximum power with a responsible sound level. New style billet end cap with stainless steel diffuser. Order one per motorcycle - all slip-on mufflers retain the stock configuration. Complete system. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture. Please consult the exhaust manufacturer directly with questions regarding any modifications that may be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore is not covered ny any warranty. See Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 32513 2 on hand
$182.99Supertrapp 2 in. Inlet Universal Aluminum External Disc Muffler 422-20000
Manufacturer: Supertrapp
Dennis Kirk Part #: 43948
Supertrapp 2 in. Inlet Universal Aluminum External Disc Muffler: Manufacturer part # 422-20000 - Aluminum body universal muffler includes all items shown, including eight 4 in. diffuser discs, closed end cap, re-packable baffle core and a weld-on mounting tab. Approximately 13 in. long tip-to-tip without discs or end cap. 2" inlet size Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 422-20000 2 on hand
$389.99Jardine RT-One 2-1 Aluminum Exhaust System 18-4615-123-02
Manufacturer: Jardine
Dennis Kirk Part #: 4402211
Jardine RT-One 2-1 Aluminum Exhaust System: Manufacturer part # 18-4615-123-02 - Full systems designed to provide big power increase and huge weight savings. Straight-through perforated core offers maximum flow. Stainless steel headpipes; stainless steel end cap. 18-4615-123-02 1 on hand
CLEARANCE!
Was: $519.99
Now: $389.99
Jardine 16 Series 4-2-1 Black Header W/Polished Aluminum Canister Complete Exhaust System 16-4501-03
Manufacturer: Jardine
Dennis Kirk Part #: 440409
Jardine 16 Series 4-2-1 Black Header W/Polished Aluminum Canister Complete Exhaust System: Manufacturer part # 16-4501-03 - High-performance looks and sound with a horsepower boost. Brilliantly polished aluminum canisters with stainless steel hardware. Fiberglass-packed, removable baffle canister(s). Retain all convenience features, including centerstand, oil filter and drain plug access. All single-muffler systems are right-side exit. Carburetor re-jetting may be desired for best performance, , Optional interchangeable tips available for customized look , Shark Fin 2-1/2" - Part No. 449703, Cadillac 2-1/2" - Part No. 449704, Slash 4" - Part No. 449702, Standard Replacement Tips 2-1/2" - Part No. 449705, ,. Optional quiet and performance cores also available , Quiet Core - Part No. 449686, Performance Core - Part No. 449688, ,. Manifold exhaust gaskets are not included , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product., , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 16-4501-03 1 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
