$6.75Novus Polish 2 NOVUS NO 2
Manufacturer: Novus
Dennis Kirk Part #: 3186
Novus Polish 2: Manufacturer part # NOVUS NO 2 - Removes scratches in visors, goggle lenses, windshields and plastic body parts. Novus No. 3 - (301300) takes out heavy scratches in Lucite® and Plexiglass® surfaces (use both No. 1 and No. 2 for detail polishing). Novus No. 2 is a medium-duty formula designed to remove fine scratches, abrasions and haziness. After using Novus No. 2 or No. 3, apply Novus No. 1 - (3185) light-duty formula for a clean, highly polished, static- and dust-free surface. 8 oz bottle. , NOTE: Not recommended for Lexan® and some polycarbonate-coated plastics.. NOVUS NO 2 More than 10 on hand
$1519.99Jardine RT-One 4-2-1 Titanium Exhaust System 18-1520-433-00
Manufacturer: Jardine
Dennis Kirk Part #: 4402089
Jardine RT-One 4-2-1 Titanium Exhaust System: Manufacturer part # 18-1520-433-00 - Full systems designed to provide big power increase and huge weight savings. Straight-through perforated core offers maximum flow. , , NOTE: This item ships in 3-4 days after the order is placed, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 18-1520-433-00 1 on hand
$199.99Carlini One-Piece Risers for 1 1/2 in. Hoghandles HHR-2
Manufacturer: Carlini
Dennis Kirk Part #: H59919
Carlini One-Piece Risers for 1 1/2 in. Hoghandles: Manufacturer part # HHR-2 - For Hoghandle Bars, Part No. H59913 and H59914. HHR-2 1 on hand
$113.99HMK 2008 Cruiser 2 Boots Cruiser 2
Manufacturer: HMK
Dennis Kirk Part #: 341111610
HMK 2008 Cruiser 2 Boots: Manufacturer part # Cruiser 2 - Rated to -40 degrees C/-40 degrees F . Boot height is 10 in. with all the features of the original Cruiser 2 and the addition of an improved lacing system. At home on the trail, in the shop or around the cabin; put them on in the morning and stay comfortable all day long. All-weather, water-resistant TPU construction with synthetic leather and textile shell. Forgiving flex with confidence-building support. Dual-zone lacing for maximum comfort and adjustability. Easy-grab nylon webbing heel pull. 400-gram Thinsulate insulation. Removable molded EVA footbed. Sure-grip tread with varied sole pattern for all-around traction. Water resistant but not waterproof.. Cruiser 2 5 on hand
CLEARANCE!
Was: $103.99
Now: $77.99
HMK Cruiser 2 Boots Cruiser 2
Manufacturer: HMK
Dennis Kirk Part #: 340927710
HMK Cruiser 2 Boots: Manufacturer part # Cruiser 2 - Constructed with synthetic leather and a textile shell for all-weather purpose to keep your feet warm all day long. Designed with one-piece for hassle-free utilization. Created for maximum comfort, adjustibility and durability with dual-zone lacing, forgiving flex and reinforced waterproof rubber. 400-gram DuPont Thermolite insulation. Comfort rated to -40°C/-40°F. Removable molded EVA footbed with Hydrophilic Fur. Receive all-around traction with the Sure-grip tread with varied sole patternWater resistant but not waterproof. , , Dimensions: Heel height: 2". Overall height: 9 1/2". Upper height: 7 1/2".. Cruiser 2 2 on hand
$113.99HMK Cruiser 2 Boots Cruiser 2 340927810
Manufacturer: HMK
Dennis Kirk Part #: 340927810
HMK Cruiser 2 Boots: Manufacturer part # Cruiser 2 - DennisKirk Part # 340927810 - Constructed with synthetic leather and a textile shell for all-weather purpose to keep your feet warm all day long. Designed with one-piece for hassle-free utilization. Created for maximum comfort, adjustibility and durability with dual-zone lacing, forgiving flex and reinforced waterproof rubber. 400-gram DuPont Thermolite insulation. Comfort rated to -40°C/-40°F. Molded EVA footbed with Hydrophilic Fur. Receive all-around traction with the Sure-grip tread with varied sole pattern. Water resistant but not waterproof. , , Dimensions: Heel height: 2". Overall height: 9". Upper height: 7".. Cruiser 2 3 on hand
$179.99Hot Cams Stage 2 Hot Cam 1077-2
Manufacturer: Hot Cams
Dennis Kirk Part #: 149993
Hot Cams Stage 2 Hot Cam: Manufacturer part # 1077-2 - Extract maximum performance from your engine. Hot Cams provide increased intake and exhaust duration for improved breathability and more horsepower. Provides significantly more mid-range punch and top-end speed for most models. Core trade-in not required so you can keep the original camshaft. Single-cam motor. Good top-end and over rev. Uses stock valve springs and auto-decompression mechanism. , Specs: , Intake Lift: 10.1mm, Intake Duration (@1mm): 248 Degrees, Exhaust Lift: 8.7mm, Exhaust Duration (@ 1mm): 268.5 Degrees. 1077-2 5 on hand
$179.99Hot Cams Stage 2 Hot Cam 1080-2
Manufacturer: Hot Cams
Dennis Kirk Part #: 149996
Hot Cams Stage 2 Hot Cam: Manufacturer part # 1080-2 - Extract maximum performance from your engine. Hot Cams provide increased intake and exhaust duration for improved breathability and more horsepower. Provides significantly more mid-range punch and top-end speed for most models. Core trade-in not required so you can keep the original camshaft. Single-cam motor. Uses stock valve springs and auto-decompression mechanism.. 1080-2 1 on hand
$179.99Hot Cams Stage 2 Hot Cam 4065-2
Manufacturer: Hot Cams
Dennis Kirk Part #: 149991
Hot Cams Stage 2 Hot Cam: Manufacturer part # 4065-2 - Extract maximum performance from your engine. Hot Cams provide increased intake and exhaust duration for improved breathability and more horsepower. Provides significantly more mid-range punch and top-end speed for most models. Core trade-in not required so you can keep the original camshaft. Single-cam motor. Excellent top-end and great over rev. Uses stock valve springs and auto-decompression mechanism.. 4065-2 1 on hand
$113.99HMK 2008 Cruiser 2 Boots Cruiser 2 341111615
Manufacturer: HMK
Dennis Kirk Part #: 341111615
HMK 2008 Cruiser 2 Boots: Manufacturer part # Cruiser 2 - DennisKirk Part # 341111615 - Rated to -40 degrees C/-40 degrees F . Boot height is 10 in. with all the features of the original Cruiser 2 and the addition of an improved lacing system. At home on the trail, in the shop or around the cabin; put them on in the morning and stay comfortable all day long. All-weather, water-resistant TPU construction with synthetic leather and textile shell. Forgiving flex with confidence-building support. Dual-zone lacing for maximum comfort and adjustability. Easy-grab nylon webbing heel pull. 400-gram Thinsulate insulation. Removable molded EVA footbed. Sure-grip tread with varied sole pattern for all-around traction. Water resistant but not waterproof.. Cruiser 2 1 on hand
$103.99HMK Cruiser 2 Boots Cruiser 2 340927715
Manufacturer: HMK
Dennis Kirk Part #: 340927715
HMK Cruiser 2 Boots: Manufacturer part # Cruiser 2 - DennisKirk Part # 340927715 - Constructed with synthetic leather and a textile shell for all-weather purpose to keep your feet warm all day long. Designed with one-piece for hassle-free utilization. Created for maximum comfort, adjustibility and durability with dual-zone lacing, forgiving flex and reinforced waterproof rubber. 400-gram DuPont Thermolite insulation. Comfort rated to -40°C/-40°F. Removable molded EVA footbed with Hydrophilic Fur. Receive all-around traction with the Sure-grip tread with varied sole patternWater resistant but not waterproof. , , Dimensions: Heel height: 2 1/8". Overall height: 10". Upper height: 7 7/8".. Cruiser 2 Expected Soon
CLEARANCE!
Was: $103.99
Now: $77.99
HMK Cruiser 2 Boots Cruiser 2 34092776
Manufacturer: HMK
Dennis Kirk Part #: 34092776
HMK Cruiser 2 Boots: Manufacturer part # Cruiser 2 - DennisKirk Part # 34092776 - Constructed with synthetic leather and a textile shell for all-weather purpose to keep your feet warm all day long. Designed with one-piece for hassle-free utilization. Created for maximum comfort, adjustibility and durability with dual-zone lacing, forgiving flex and reinforced waterproof rubber. 400-gram DuPont Thermolite insulation. Comfort rated to -40°C/-40°F. Removable molded EVA footbed with Hydrophilic Fur. Receive all-around traction with the Sure-grip tread with varied sole patternWater resistant but not waterproof. Boot is 10" tall.. Cruiser 2 1 on hand
