1500 Intruder Lc

$12.99 Supertrapp 1.5 in. Stainless Steel T-Bolt Clamp 094-1500
Manufacturer: Supertrapp
Dennis Kirk Part #: 443273
Supertrapp 1.5 in. Stainless Steel T-Bolt Clamp: Manufacturer part # 094-1500 - Heavy-gauge, polished stainless steel construction. Fights heat and rust Sold each. 094-1500
1 on hand

More Info/Options for Supertrapp 1.5 in. Stainless Steel T-Bolt Clamp 094-1500

1500 Intruder Lc

$14.99 Snobug Cargo Hold-Downs-1500 lbs. 39200069
Manufacturer: Snobug
Dennis Kirk Part #: 407466
Snobug Cargo Hold-Downs-1500 lbs.: Manufacturer part # 39200069 - Inexpensive way to make trailering almost anything easier and safer. Made from tough steel with a rust-resistant zinc plating. Round, protected surface-mount style surrounded by plastic ramped bodies. Measures 4 1/8in. dia. x 1/2in. H with a .25in. dia. D-ring; pull limit is 1,500 lb.. Drain hole in the base. Sold in pairs.. 39200069
More than 10 on hand

More Info/Options for Snobug Cargo Hold-Downs-1500 lbs. 39200069

1500 Intruder Lc

$385.99 Joker Machine Smooth Chrome Billet Handlebar Control with Switches 960815-LC
Manufacturer: Joker Machine
Dennis Kirk Part #: 572791
Joker Machine Smooth Chrome Billet Handlebar Control with Switches: Manufacturer part # 960815-LC - Left side (hydraulic clutch) master cylinder assembly is available in 11/16 in. bore size. For use on 1 in. handlebars. Kits include mounting hardware and levers. Made in the U.S.A.. Brake side controls and clutch side controls sold separately. Mechanical clutch lever assembly part number H5740/H5742) uses 82-95 OEM-style cable, , NOTE: Matching high-low light switch is not included, must be purchased separately (part number H21110/H21111). 960815-LC
Expected Soon

More Info/Options for Joker Machine Smooth Chrome Billet Handlebar Control with Switches 960815-LC

1500 Intruder Lc

$372.99 Joker Machine Smooth Billet Handlebar Control Kit with Switches 960801-LC
Manufacturer: Joker Machine
Dennis Kirk Part #: H5748
Joker Machine Smooth Billet Handlebar Control Kit with Switches: Manufacturer part # 960801-LC - Left side (hydraulic clutch) master cylinder assembly is available with 9/16 in. bore size. For use on 1 in. handlebars. Kits include mounting hardware and levers. Made in the U.S.A.. Brake side controls and clutch side controls sold separately. Mechanical clutch lever assembly (part numbers H5740 and H5742) uses 82-95 OEM-style cable, , NOTE: Matching high-low light switch is not included, must be purchased separately (part numbers H21110/H21111). 960801-LC
Expected Soon

More Info/Options for Joker Machine Smooth Billet Handlebar Control Kit with Switches 960801-LC

1500 Intruder Lc

$239.99 Joker Machine Smooth Chrome Billet Handlebar Control w/o Switches 960809-LC
Manufacturer: Joker Machine
Dennis Kirk Part #: 572789
Joker Machine Smooth Chrome Billet Handlebar Control w/o Switches : Manufacturer part # 960809-LC - Left side (hydraulic clutch) master cylinder assembly is available in 11/16 in. bore size. For use on 1 in. and 1 1/4 in. handlebars. Kits include mounting hardware and levers. Made in the U.S.A.. Brake side controls and clutch side controls sold separately. Mechanical clutch lever assembly (part numbers H5740 / H5742) uses 82-95 OEM-style cable, , NOTE: Matching high-low light switch is not included, must be purchased separately (part numbers H21110 / H21111). 960809-LC
Expected Soon

More Info/Options for Joker Machine Smooth Chrome Billet Handlebar Control w/o Switches 960809-LC

1500 Intruder Lc

$239.99 Joker Machine Smooth Billet Handlebar Control Kit w/o Switches 960800-LC
Manufacturer: Joker Machine
Dennis Kirk Part #: H5744
Joker Machine Smooth Billet Handlebar Control Kit w/o Switches: Manufacturer part # 960800-LC - Left side (hydraulic clutch) master cylinder assembly is available with 9/16 in. bore size. For use on 1 in. handlebars. Kits include mounting hardware and levers. Brake side controls and clutch side controls sold separately. Made in the U.S.A., , NOTE: Matching high-low light switch is not included, must be purchased separately (part numbers H21110 / H21111). 960800-LC
1 on hand

More Info/Options for Joker Machine Smooth Billet Handlebar Control Kit w/o Switches 960800-LC

1500 Intruder Lc

$58.99 Supertrapp 3 in. Series Universal Four Stroke Muffler 317-1500
Manufacturer: Supertrapp
Dennis Kirk Part #: 25966
Supertrapp 3 in. Series Universal Four Stroke Muffler: Manufacturer part # 317-1500 - 1 1/2 in. (38mm) outside diameter. Fit any size body. U.S. Forest Service Approved Must order core kit for this muffler body part# 25-963.. 317-1500
More than 10 on hand

More Info/Options for Supertrapp 3 in. Series Universal Four Stroke Muffler 317-1500

1500 Intruder Lc

$179.99 Memphis Shades 1500 Goldwing Tall Vented Windshield MEP4720
Manufacturer: Memphis Shades
Dennis Kirk Part #: 232450
Memphis Shades 1500 Goldwing Tall Vented Windshield: Manufacturer part # MEP4720 - Much less expensive than OEM shields. Made of DOT approved 3/16 in. Lucite for excellent clarity and weather resistance. OEM style and fit. 2 in. taller than standard. Vents are replicas of OEM vents and have mechanical open/close mechanisms NOTE: Gradient Ruby shown.. MEP4720
1 on hand

More Info/Options for Memphis Shades 1500 Goldwing Tall Vented Windshield MEP4720

1500 Intruder Lc

$139.99 Memphis Shades 1500 Goldwing Tall Windshield MEP4740
Manufacturer: Memphis Shades
Dennis Kirk Part #: 232506
Memphis Shades 1500 Goldwing Tall Windshield: Manufacturer part # MEP4740 - Much less expensive than OEM shields. Made of DOT approved 3/16 in. Lucite for excellent clarity and weather resistance. OEM style and fit. 2 in. taller than standard. MEP4740
1 on hand

More Info/Options for Memphis Shades 1500 Goldwing Tall Windshield MEP4740

1500 Intruder Lc

$129.99 Memphis Shades 1500 Goldwing Standard Windshield MEP4730
Manufacturer: Memphis Shades
Dennis Kirk Part #: 232497
Memphis Shades 1500 Goldwing Standard Windshield: Manufacturer part # MEP4730 - Much less expensive than OEM shields. Made of DOT approved 3/16 in. Lucite for excellent clarity and weather resistance. OEM style and fit.. MEP4730
1 on hand

More Info/Options for Memphis Shades 1500 Goldwing Standard Windshield MEP4730

1500 Intruder Lc

$169.99 Memphis Shades 1500 Goldwing Standard Vented Windshield MEP4710
Manufacturer: Memphis Shades
Dennis Kirk Part #: 232441
Memphis Shades 1500 Goldwing Standard Vented Windshield: Manufacturer part # MEP4710 - Much less expensive than OEM shields. Made of DOT approved 3/16 in. Lucite for excellent clarity and weather resistance. OEM style and fit. 2 in. taller than standard. Vents are replicas of OEM vents and have mechanical open/close mechanisms NOTE: Gradient Ruby shown.. MEP4710
1 on hand

More Info/Options for Memphis Shades 1500 Goldwing Standard Vented Windshield MEP4710

1500 Intruder Lc

$23.99 DG Genuine Keihin 13 Series Main Jets - Size 150/152/155/158/160 34-1500
Manufacturer: DG
Dennis Kirk Part #: 170051
DG Genuine Keihin 13 Series Main Jets - Size 150/152/155/158/160: Manufacturer part # 34-1500 - These convenient kits each contain five sizes of genuine Keihin Main Jets in a particular range. For P-series carbs. Be prepared for any riding condition by having extra main jets with you. Five per package.. 34-1500
7 on hand

More Info/Options for DG Genuine Keihin 13 Series Main Jets - Size 150/152/155/158/160 34-1500

1500 Intruder Lc

1500 Intruder Lc