|
|
$313.99
Black C&A Pro Advantage ADX Race Skis
Dennis Kirk Part #: 10792
Black C&A Pro Advantage ADX Race Skis: Manufacturer part # CA6R1 - C&A PRO brand snowmobile skis are famous for their control, handling and aggressive turning capabilities. The preloaded tips absorb much of the shock from a bump and keep it from the sled. The patented C and A all-plastic saddle is molded right into the ski, which makes for the most direct flex and reverse flex around. 90 degree angles on the square keel plus the flat-bottom design mean the ski floats on the snow while other skis rely on engineered-in lift. Tip flexibility is dramatically increased by the exclusive ball-and-cup loop assembly. Mounting kit must be purchased separately. Wear/bar runners not included, see runner section for C and A applications 031396, 031397 and 031398. , This ski corners like no other - square grooves 1 inch wide x 18 inches long x 3/8 inch deep are cut into the flat bottom to work with the square keel. Designed for aggressive riders with heavily studded, big-horsepower sleds. 6 inches wide, 43 inches overall length - weighs 5 1/2 pounds without runner. Three year manufacturers warranty. Sold in pairs. , NOTE: For wear rods order the following, Roetin , Hi-performance X-PR-One part number 031394, Woodys , Top-Stock Hard Surface part number 031507, Extender Trail III part number 031852, Trail Blazer IV part number 031502, Executive Series part number 031504, Sno-Cross Competition Series part number 031366, Ultra Series part number 031600, Bergstrom Skegs , Triple 4 in. part number 031866, Triple 6 in. part number 031876, Triple 8 in. part number 031885, Type 1 part number 031730, Type 2 part number 031741, Type 4 part number 031762, Stud Boy , Shaper 6 in. part number 031655, Shaper 7 1/2 in. part number 031663, Switchback part number 031356, G-Force part number 031357. CA6R1
2 on Hand
More Info/Options for Black C&A Pro Advantage ADX Race Skis
|
|
|
|
$408.99
Black C&A Pro Extreme XT Skis
Dennis Kirk Part #: 105894
Black C&A Pro Extreme XT Skis: Manufacturer part # CA7BLK - In a unique manufacturing process, each ski comes from a flat mold and is then bent into place -- which produces permanent outward pressure. The preloaded tips absorb much of the shock from a bump and keep it from the sled. The patented C&A all-plastic saddle is molded right into the ski, which makes for the most direct flex and reverse flex around. 90° angles on the square keel plus the flat-bottom design mean the ski floats on the snow while other skis rely on engineered-in lift. Tip flexibility is dramatically increased by the exclusive ball-and-cup loop assembly. Mounting kit must be purchased separately. Wearrods not included. Extreme XT The most aggressive ski in the industry in terms of quick response in turns. Ski is 7 1/4 in. wide and provides exceptional flotation in deep snow. 1 1/2 in. deep step-design center keel plus two 1/2 in. x 1/2 in. outer keels on each ski. Boxed-in saddle for added strength. Sold in pairs. , NOTE: For wear rods order the following, Roetin , Hi-performance X-PR-One part number 031394, Woodys , Top-Stock Hard Surface part number 031507, Extender Trail III part number 031852, Trail Blazer IV part number 031502, Executive Series part number 031504, Sno-Cross Competition Series part number 031366, Ultra Series part number 031600, Bergstrom Skegs , Triple 4 in. part number 031866, Triple 6 in. part number 031876, Triple 8 in. part number 031885, Type 1 part number 031730, Type 2 part number 031741, Type 4 part number 031762, Stud Boy , Shaper 6 in. part number 031655, Shaper 7 1/2 in. part number 031663, Switchback part number 031356, G-Force part number 031357. CA7BLK
1 on Hand
More Info/Options for Black C&A Pro Extreme XT Skis
|
|
|
|
$351.99
Black C&A Pro Razor RZ Skis
Dennis Kirk Part #: 10939
Black C&A Pro Razor RZ Skis: Manufacturer part # 77020320 - In a unique manufacturing process, each ski comes from a flat mold and is then bent into place -- which produces permanent outward pressure. The preloaded tips absorb much of the shock from a bump and keep it from the sled. The patented C&A all-plastic saddle is molded right into the ski, which makes for the most direct flex and reverse flex around. 90 degree angles on the square keel plus the flat-bottom design mean the ski floats on the snow while other skis rely on engineered-in lift. Tip flexibility is dramatically increased by the exclusive ball-and-cup loop assembly. Mounting kit must be purchased separately. Wear rods not included. High-performance Razor Ski with aggressive control for the experienced rider and racer. Offers features similar to the ADX but with the "VEE" shaped outboard. , NOTE: For wear rods order the following, Roetin , Hi-performance X-PR-One part number 031394 keels, Woodys , Top-Stock Hard Surface part number 031507, Extender Trail III part number 031852, Trail Blazer IV part number 031502, Executive Series part number 031504, Sno-Cross Competition Series part number 031366, Ultra Series part number 031600, Bergstrom Skegs , Triple 4 in. part number 031866, Triple 6 in. part number 031876, Triple 8 in. part number 031885, Type 1 part number 031730, Type 2 part number 031741, Type 4 part number 031762, Stud Boy , Shaper 6 in. part number 031655, Shaper 7 1/2 in. part number 031663, Switchback part number 031356, G-Force part number 031357. 77020320
2 on Hand
More Info/Options for Black C&A Pro Razor RZ Skis
|
|
|
|
|
|
$49.99
Black Motovan Ski Skins 6 1/4 in. Width
Dennis Kirk Part #: 10272
Black Motovan Ski Skins 6 1/4 in. Width: Manufacturer part # 0089004 - Attaches to the bottoms of your skis for better flotation, ski protection and less drag on the snow. Made from high-density polyethylene resin with a smooth, glossy finish. Pre-drilled for the original wear rod and includes ski loop bolt for secure attachment, except for Yamaha Vmax 500 and 600 models, which do not attach to the ski loop and must be drilled and riveted. Sold in pairs in a variety of colors.. 0089004
1 on Hand
More Info/Options for Black Motovan Ski Skins 6 1/4 in. Width
|
|
|
|
$49.99
Black Motovan Ski Skins 6 1/4 in. Width
Dennis Kirk Part #: 10276
Black Motovan Ski Skins 6 1/4 in. Width: Manufacturer part # 0089005 - Attaches to the bottoms of your skis for better flotation, ski protection and less drag on the snow. Made from high-density polyethylene resin with a smooth, glossy finish. Pre-drilled for the original wear rod and includes ski loop bolt for secure attachment, except for Yamaha Vmax 500 and 600 models, which do not attach to the ski loop and must be drilled and riveted. Sold in pairs in a variety of colors.. 0089005
2 on Hand
More Info/Options for Black Motovan Ski Skins 6 1/4 in. Width
|
|
|
|
$49.99
Black Motovan Ski Skins 6 3/4 in. Width
Dennis Kirk Part #: 10365
Black Motovan Ski Skins 6 3/4 in. Width: Manufacturer part # 0089007 - Attaches to the bottoms of your skis for better flotation, ski protection and less drag on the snow. Made from high-density polyethylene resin with a smooth, glossy finish. Pre-drilled for the original wear rod and includes ski loop bolt for secure attachment, except for Yamaha Vmax 500 and 600 models, which do not attach to the ski loop and must be drilled and riveted. Sold in pairs. 0089007
Expected Soon
More Info/Options for Black Motovan Ski Skins 6 3/4 in. Width
|
|
|
|
$73.99
Black SLP Ski Slips
Dennis Kirk Part #: 105824
Black SLP Ski Slips: Manufacturer part # 35-230 - Protect concrete floors, trailer decks, skis and carbides with high quality UHMW plasitc Ski-Slips Made from the same materail as most plastic skis. Super strong to resist carbide cutting while staying flexible even in extreme cold. Super slippery. No loose mounting hardware, universal fit for different ski designs. Easy on and off - small and compact for easy storage.. 35-230
5 on Hand
More Info/Options for Black SLP Ski Slips
|
|
|
|
$114.99
Black SLP Ultra-Lite SLT Ski
Dennis Kirk Part #: 10805
Black SLP Ultra-Lite SLT Ski: Manufacturer part # 35-170 - SLP patented "Rocker Keel" design. Excellent straight line tracking with even less arm effort than original ULTRA-LITE™ Skis. Lightweight and durable. Tuned flexibility. For a pair of skis order two mount kits and two ski bottoms. Wear rods not included separately. Options are 10823, 031490 or 031491. Best trail runner combination is the use of PART NO. 10823 Carbide Runners with optional 10824 Keel Blades - this combination achieves the maximum reduction of tracking and darting, with minimal arm effort. In loose snow/mountain riding conditions choose 031490 with 90 degree carbide for longest life or 031491 with 60 degree carbide for riders who prefer a steeper angle. Two-year limited warranty. Pictured in red. , NOTE: For carbide use any of the following:, Woodys, 4 in. carbide part number 031800, 6 in. carbide part number 031802, 8 in. carbide part number 031804, Roetin, Trail X-10 One carbides part number 03408, Performance X-10 Two carbides part number 03458, Hi-Performance X-PR One carbides part number 031347, Extreme X-PRT carbides part number 03620, Stud Boy , Shaper 4 1/2 in. part number 031892, Shaper 6 in. part number 031893, Shaper 7 1/2 in. part number 031894, SLP , Trail/packed snow 5 in. x 90 degree carbide, must use w/keel blade part number 10824; use this part number 10823, Loose snow carbide part number 031490, Loose snow carbide part number 031491, Pro race snocross carbide part number 031636, Non-carbide keel blade for use with part number 10823; use part number 10824, Carbide runners for Tri-Keel/Tri-Keel II part number 031257 and part number 031258, Non-carbide outer runners 5-bolt part number 031259, 5 in. carbide for Arctic Cat use part number 03824, 5 in. carbide for Polaris use part number 03823, 5 in. carbide for Ski-Doo use part number 03823, 5 in. carbide for Yamaha 1989-1996 use part number 03825, 5 in. carbide Yamaha 97-2004 use part number 03823, 6 in. carbide for Arctic Cat use part number 03827, 6 in. carbide for Polaris use part number 03826, 6 in. carbide for Ski-Doo use part number 03826, 6 in. carbide for Yamaha 1989-1996 use part number 03828, 6 in. carbide for Yamaha 1997-2004 use part number 03826. 35-170
9 on Hand
More Info/Options for Black SLP Ultra-Lite SLT Ski
|
|
|
|
$53.99
Black SLP Ultra-Lite Standard Ski Bottoms
Dennis Kirk Part #: 10590
Black SLP Ultra-Lite Standard Ski Bottoms : Manufacturer part # 35-13 - Replacement Ultra-Lite® Standard Ski Bottoms, , NOTE: Fits all Polaris models with IFS, all Ski-Doo models with trailing arm and all Yamaha models 97-04 with trailing arm suspension. Runner bolt pattern is stock Polaris for Polaris IFS, Ski-Doo Trailing Arm and Yamaha Trailing Arm Suspension. Replacement rubber damper for 97-04 models with factory plastic skis for the Polaris with IFS order Part No. 10-674. This will not fit on a Ultra Lite SLT Skis and this does not match the OEM Polaris SLP Skis. 35-13
6 on Hand
More Info/Options for Black SLP Ultra-Lite Standard Ski Bottoms
|
|
|
|
$51.99
Black Sno-Stuff Ski Skin 5 3/4 in. Width
Dennis Kirk Part #: 10222
Black Sno-Stuff Ski Skin 5 3/4 in. Width : Manufacturer part # 501-601 - Made from 3/16 in. thick, high-impact polyethylene in black, neon green and several other bright colors to match most popular sleds. New 1/8 in. thick wrap-around design for a cleaner look and more secure attachment. Prevents ice and snow from sticking to skis. Improves performance. Drilled for stock wear bar use for easy installation.. 501-601
1 on Hand
More Info/Options for Black Sno-Stuff Ski Skin 5 3/4 in. Width
|
|
|
|
$51.99
Black Sno-Stuff Ski Skin 6 in. Width
Dennis Kirk Part #: 10608
Black Sno-Stuff Ski Skin 6 in. Width: Manufacturer part # 501-402 - Made from 3/16 in. thick, high-impact polyethylene in black, neon green and several other bright colors to match most popular sleds. New 1/8 in. thick wrap-around design for a cleaner look and more secure attachment. Prevents ice and snow from sticking to skis. Improves performance. Drilled for stock wear bar use for easy installation.. 501-402
1 on Hand
More Info/Options for Black Sno-Stuff Ski Skin 6 in. Width
|
|
|
|
$62.99
Black Sno-Stuff Ski Skins 5 1/2 in. Width
Dennis Kirk Part #: 10524
Black Sno-Stuff Ski Skins 5 1/2 in. Width : Manufacturer part # 499-600 - Made from 3/16 in. thick, high-impact polyethylene in black, neon green and several other bright colors to match most popular sleds. New 1/8 in. thick wrap-around design for a cleaner look and more secure attachment. Prevents ice and snow from sticking to skis. Improves performance. Drilled for stock wear bar use for easy installation. Special 1/8" thick ski inserts replace the originals, , NOTE: Ski inserts are designed for both non-reverse and reverse snowmobiles. If you have a reverse model you will have to cut or drill an oblong hole after the rear hole in the skin to allow for the rear of your wearbar. 499-600
3 on Hand
More Info/Options for Black Sno-Stuff Ski Skins 5 1/2 in. Width
|
|
|
|
$51.99
Black Sno-Stuff Ski Skins 5 7/8 in. Width
Dennis Kirk Part #: 10220
Black Sno-Stuff Ski Skins 5 7/8 in. Width : Manufacturer part # 501-401 - Made from 3/16 in. thick, high-impact polyethylene in black, neon green and several other bright colors to match most popular sleds. New 1/8 in. thick wrap-around design for a cleaner look and more secure attachment. Prevents ice and snow from sticking to skis. Improves performance. Drilled for stock wear bar use for easy installation, , NOTE: For the best performance order any of the 5" width for Ski-Doo narrow (117mm, about 4 5/8") ski, and 5 7/8" for their wide (139mm, about 5 1/2") ski. Since some models came with the narrow, some with wide and some may have been swapped, be sure to measure the width of your skis before ordering. 501-401
3 on Hand
More Info/Options for Black Sno-Stuff Ski Skins 5 7/8 in. Width
|
|
|
|
$51.99
Black Sno-Stuff Ski Skins 5 in. Width
Dennis Kirk Part #: 10219
Black Sno-Stuff Ski Skins 5 in. Width : Manufacturer part # 501-400 - Made from 3/16 in. thick, high-impact polyethylene in black, neon green and several other bright colors to match most popular sleds. New 1/8 in. thick wrap-around design for a cleaner look and more secure attachment. Prevents ice and snow from sticking to skis. Improves performance. Drilled for stock wear bar use for easy installation, , NOTE: For the best performance order any of the 5" width for Ski-Doo narrow (117mm, about 4 5/8") ski, and 5 7/8" for their wide (139mm, about 5 1/2") ski. Since some models came with the narrow, some with wide and some may have been swapped, be sure to measure the width of your skis before ordering. 501-400
2 on Hand
More Info/Options for Black Sno-Stuff Ski Skins 5 in. Width
|
|
|
|
$51.99
Black Sno-Stuff Ski Skins 6 1/4 in. Width
Dennis Kirk Part #: 10221
Black Sno-Stuff Ski Skins 6 1/4 in. Width : Manufacturer part # 501-600 - Made from 3/16 in. thick, high-impact polyethylene in black, neon green and several other bright colors to match most popular sleds. New 1/8 in. thick wrap-around design for a cleaner look and more secure attachment. Prevents ice and snow from sticking to skis. Improves performance. Drilled for stock wear bar use for easy installation, , NOTE: If your are ordering these ski skins for Dennis Kirk Part No. 1059 order the following ski skins instead for the best fit Green - Part No. 10375 Black - Part No. 10216.. 501-600
2 on Hand
More Info/Options for Black Sno-Stuff Ski Skins 6 1/4 in. Width
|
|
|
|
$51.99
Black Sno-Stuff Ski Skins 6 1/4 in. Width
Dennis Kirk Part #: 10217
Black Sno-Stuff Ski Skins 6 1/4 in. Width : Manufacturer part # 501-101 - Made from 3/16 in. thick, high-impact polyethylene in black, neon green and several other bright colors to match most popular sleds. New 1/8 in. thick wrap-around design for a cleaner look and more secure attachment. Prevents ice and snow from sticking to skis. Improves performance. Drilled for stock wear bar use for easy installation, , NOTE: If your are ordering these ski skins for Dennis Kirk Part No. 1059 order the following ski skins instead for the best fit Green - Part No. 10375 Black - Part No. 10216.. 501-101
1 on Hand
More Info/Options for Black Sno-Stuff Ski Skins 6 1/4 in. Width
|
|
|
|
$51.99
Black Sno-Stuff Ski Skins 7 in. Width
Dennis Kirk Part #: 10216
Black Sno-Stuff Ski Skins 7 in. Width: Manufacturer part # 501-100 - Made from 3/16 in. thick, high-impact polyethylene in black, neon green and several other bright colors to match most popular sleds. New 1/8 in. thick wrap-around design for a cleaner look and more secure attachment. Prevents ice and snow from sticking to skis. Improves performance. Drilled for stock wear bar use for easy installation.. 501-100
1 on Hand
More Info/Options for Black Sno-Stuff Ski Skins 7 in. Width
|
|
|
|
$273.99
Black Sno-Stuff TCS Ski Bottoms
Dennis Kirk Part #: 10773
Black Sno-Stuff TCS Ski Bottoms: Manufacturer part # 570-500 - Designed for lightweight performance and a straight, safe ride. Excellent for all-around riders on a variety of snow conditions. Made for super-tough UHMW (Ultra-High Molecular Weight) molded plastic. Order one pair of skis in your choice of colors and the custom-fit mount kit for your machine. Mount kits sold separately. Steel wear rods included. Sold in Pairs. Mount kit is sold separately, , Part numbers for replacement wear bars: , Standard steel - 031421 (requires 4 total), 4" Carbide - 031422 (requires 1 set per ski), 6" Carbide - 031707 (requires 1 set per ski). 570-500
2 on Hand
More Info/Options for Black Sno-Stuff TCS Ski Bottoms
|
|
|
|
$251.99
Black Sno-Stuff X-Calibar Ski Bottoms
Dennis Kirk Part #: 105917
Black Sno-Stuff X-Calibar Ski Bottoms: Manufacturer part # 575-500 - This ski is the cutting edge of performance, features and style. Made of UHMW PE material. Ski design is a 1 in. steep and deep keel. Parabolic design and opposing curve fins front and back make this a non-traditional single-runner ski. This results in excellent corner-carving ability and high levels of traction. Darting effect is greatly reduced by the bell nose keel that keeps the center carbide cutting a fresh path. 6.375 in. wide at the tip of the ski. Ski blades sold in pairs; include standard wear bars (installed) and black ski loop. Mount kit must be ordered separately. Replacement wear bars sold separately. DIMENISIONS: Bottom Length: 42-3/4in.. Top Length: 40-3/4in.. Width Across Top: 6-3/8in.. MOUNTING HOLES CENTER DISTANCE FROM: Front to 1st: 16-5/8in.. 1st to 2nd: 3-1/8in.. 2nd to 3rd: 9-1/2in.. 3rd to end: 11-1/2in.. NOTE: Arctic Cat models with OEM blow-molded skis require two Arctic Cat number 0603-036 ruber dampeners to install. 575-500
2 on Hand
More Info/Options for Black Sno-Stuff X-Calibar Ski Bottoms
|
|
