|
|
$37.99
Caliber Grip Glides For Ramps 516039
Dennis Kirk Part #: 516039
Caliber Grip Glides For Ramps 516039: Manufacturer part # 13352 - Now you can add Grip Glides to open-frame ramps used on flatbed trailers. Sold in a set of 16 pieces, enough for one side of a ramp; two sets will complete both sides. , , Included Items: , (16) Ramp Grip Glides (each accepts up to 3 screws), (33) Stainless Sheet Metal Screws 1 in. long, (1) Instruction Sheet, , Length: 8 1/2 in., Width: 3 in., Tread Depth: 1/2 in., Installed Height: 3/4 in., Fits 1 in. square tubes, , Note: Please note a 11/64 in. drill bit and drill are required to install these onto aluminum or steel bars (bit not included). 13352
2 on Hand
More Info/Options for Caliber Grip Glides For Ramps 516039
|
|
|
|
$369.99
CMP Lift Stand 28556
Dennis Kirk Part #: 28556
CMP Lift Stand 28556: Manufacturer part # 91007836 - Set up a work station like the pros use-right in your own garage!. Lifts machine up to 24 in. off the floor to gain a better working position. Folds down to 5 in. for storage. 2000 lbs. lift/hold capacity. Cranks up with supplied crank or use an electric drill. Optional wheel kit allows easy movement of lift stand on any flat, smooth surface Order Part No. 28666 , This item only ships via UPS.. 91007836
5 on Hand
More Info/Options for CMP Lift Stand 28556
|
|
|
|
|
|
$379.99
CMP Pro Shop Dolly-Standard 28771
Dennis Kirk Part #: 28771
CMP Pro Shop Dolly-Standard 28771: Manufacturer part # 81000240 - Large 5" x 8" turf tires for increased flotation and lift. Dual 8" wide lift pads accommodate all snowmobiles. Increased lifting height. Quick-adjust push-button lift strap. Bright red powder-coat finish. , NOTE: Can only be shipped UPS .. 81000240
1 on Hand
More Info/Options for CMP Pro Shop Dolly-Standard 28771
|
|
|
|
|
|
$74.99
CMP Pro-Series Snowmobile Stands 28342
Dennis Kirk Part #: 28342
CMP Pro-Series Snowmobile Stands 28342: Manufacturer part # 81501050 - Stands are fabricated of heavy-gauge steel. Full shield blocks debris during warmups. One-piece construction with no hinges or chains. Use for service or storage. , , NOTES:, , Can only be shipped UPS , Long travel suspensions are generally those over 7 in.; if unsure of your suspension order 28-687 intead, or measure the height of your bumper as the back is raised to see how high is must be to pull the track off the ground. 81501050
3 on Hand
More Info/Options for CMP Pro-Series Snowmobile Stands 28342
|
|
|
|
$91.99
CMP Pro-Series Snowmobile Stands 28687
Dennis Kirk Part #: 28687
CMP Pro-Series Snowmobile Stands 28687: Manufacturer part # 81501054 - Stands are fabricated of heavy-gauge steel. Full shield blocks debris during warmups. One-piece construction with no hinges or chains. Use for service or storage. , , NOTES:, , Can only be shipped UPS , Long travel suspensions are generally those over 7 in.; if unsure of your suspension order 28-687 intead, or measure the height of your bumper as the back is raised to see how high is must be to pull the track off the ground. 81501054
10 on Hand
More Info/Options for CMP Pro-Series Snowmobile Stands 28687
|
|
|
|
|
|
|
|
$306.99
CMP Shop Dolly 28517
Dennis Kirk Part #: 28517
CMP Shop Dolly 28517: Manufacturer part # 81000228 - Move your snowmobile without breaking your back. Pads adjust to fit machines 33 in. to 48 in. wide. U-shape handle gives excellent clearance and is adjustable so you can get more leverage for easier lifting. Rubber lift pads wont scratch machine. Comes with 1 in. x 46 in. nylon lift strap Requires assembly. , Note: Ship via UPS Only .. 81000228
3 on Hand
More Info/Options for CMP Shop Dolly 28517
|
|
|
|
|
|
|
|
$94.99
E-Z Traxx E-Z Roller Dolly Set 282553
Dennis Kirk Part #: 282553
E-Z Traxx E-Z Roller Dolly Set 282553: Manufacturer part # 1053 - Travel over gravel, cracks and bumps with this high-quality, solid steel dolly set. Extra-long and stable 3" rubber and nylon castors allow for easy movement and 360 turning radius. Protects and fits all sizes of skis, including skis with dual carbides, with a rubberized ventor groove. Prevent unwanted movement with adjustable tie-down straps.. 1053
Expected Soon
More Info/Options for E-Z Traxx E-Z Roller Dolly Set 282553
|
|
|
|
$43.99
E-Z Traxx Sled Stand 28449
Dennis Kirk Part #: 28449
E-Z Traxx Sled Stand 28449: Manufacturer part # 1070 - The simple method for keeping snowmobiles elevated and preventing tracks from freezing to the ground. Removes load from rear suspension during storage. Adjustable stand height fits most snowmobiles. Easy installation -- slide stand under rear lift bar, place hands under channel and lift; stand falls into place. Adjusts to either 22" or 28" tall.. 1070
1 on Hand
More Info/Options for E-Z Traxx Sled Stand 28449
|
|
|
|
|
|
$121.99
E-Z Traxx Snowmobile Lift 28485
Dennis Kirk Part #: 28485
E-Z Traxx Snowmobile Lift 28485: Manufacturer part # 1095 - Made of durable steel. Features detachable front base. Lifts front or rear of sled for ski and track maintenance. Raises higher than most other lifts. No mast adjustments required. Hooks adjust instantly to any height. 12" maximum lift distance. 300 lb. capacity. Two plastic plugs and latch pin listed in the instructions are not included. 1095
1 on Hand
More Info/Options for E-Z Traxx Snowmobile Lift 28485
|
|
|
|
|
|
$71.99
Fulton Snowmobile Lift Jack 282367
Dennis Kirk Part #: 282367
Fulton Snowmobile Lift Jack 282367: Manufacturer part # SBL100 - Smooth and easy-to-operate (five turns per one inch of travel), this is the industry's fastest mechanical screw jack. With 19 in. of travel, ground clearance for even long two-up touring sleds is readily available. Designed for 31 in. maximum lift height; 800 lb. capacity. Heavy-duty lip with vinyl coating for great support with no scratching of the bumper. Locking plate deters theft; brass hitch lock (PART NO. 40-6798) must be purchased separately. Compact, top wind design takes less space in operation or storage. Big 9.7 in. x 10 in. zinc-plated base for stability when a machine is jacked up. Pre-drilled base accepts track studs to keep it from sliding in icy conditions. Black powder-painted outer tube comes with a lift bracket attached.. SBL100
9 on Hand
More Info/Options for Fulton Snowmobile Lift Jack 282367
|
|
|
|
|
|
