|
|
|
|
$15.99
BBR Motorsports Kill Switch 510-KLX-1505
Manufacturer: BBR Motorsports
Dennis Kirk Part #: 213936
BBR Motorsports Kill Switch: Manufacturer part # 510-KLX-1505 - "CR" style kill button designed for the KLX/DR-Z110. Note that typical push-button style kill buttons will not work with the KLX/DR-Z110 ignition because the circuit must be connected for the engine to run. This special button has a unique internal construction that keeps the circuit connected unless the button is pressed. 510-KLX-1505
2 on hand
More Info/Options for BBR Motorsports Kill Switch 510-KLX-1505
Off Road - Electrical - Switches
|
|
|
|
|
|
|
|
|
|
|
|
$56.99
Gunnar Black Tether Kill Switch, Normally Closed GK1013NC
Manufacturer: Gunnar
Dennis Kirk Part #: 211100
Gunnar Black Tether Kill Switch, Normally Closed: Manufacturer part # GK1013NC - Tether kill switch is easy to install - plugs into most ATVs. Narrow design, installs on slightly curved portion of the bars. Housing O-ring weatherproofed. Matching lanyard included. Replacement lanyard available separately. This tether is normally closed. To see if this is correct for your machine you must perform the following test. 1. Locate the two wires going to your machine's kill switch. 2. With the kill switch in the run position, test for continuity between the two wires. 3. If you DO have continuity, this tether switch WILL work for your machine. 4. If you DO NOT have continuity, this tether WILL NOT work for your machine, , NOTE: When selecting a kill switch be sure to check and see if you need a Normally Open or a Normally Closed switch. If you are not sure, check the wiring schematic for your machine. GK1013NC
10 on hand
More Info/Options for Gunnar Black Tether Kill Switch, Normally Closed GK1013NC
Off Road - Electrical - Switches
|
|
|
|
$56.99
Gunnar Blue Tether Kill Switch, Normally Closed GK1012NC
Manufacturer: Gunnar
Dennis Kirk Part #: 211099
Gunnar Blue Tether Kill Switch, Normally Closed: Manufacturer part # GK1012NC - Tether kill switch is easy to install - plugs into most ATVs. Narrow design, installs on slightly curved portion of the bars. Housing O-ring weatherproofed. Matching lanyard included. Replacement lanyard available separately. This tether is normally closed. To see if this is correct for your machine you must perform the following test. 1. Locate the two wires going to your machine's kill switch. 2. With the kill switch in the run position, test for continuity between the two wires. 3. If you DO have continuity, this tether switch WILL work for your machine. 4. If you DO NOT have continuity, this tether WILL NOT work for your machine, , NOTE: When selecting a kill switch be sure to check and see if you need a Normally Open or a Normally Closed switch. If you are not sure, check the wiring schematic for your machine. GK1012NC
1 on hand
More Info/Options for Gunnar Blue Tether Kill Switch, Normally Closed GK1012NC
Off Road - Electrical - Switches
|
|
|
|
$56.99
Gunnar Red Tether Kill Switch, Normally Closed GK1011NC
Manufacturer: Gunnar
Dennis Kirk Part #: 211098
Gunnar Red Tether Kill Switch, Normally Closed: Manufacturer part # GK1011NC - Tether kill switch is easy to install - plugs into most ATVs. Narrow design, installs on slightly curved portion of the bars. Housing O-ring weatherproofed. Matching lanyard included. Replacement lanyard available separately. This tether is normally closed. To see if this is correct for your machine you must perform the following test. 1. Locate the two wires going to your machine's kill switch. 2. With the kill switch in the run position, test for continuity between the two wires. 3. If you DO have continuity, this tether switch WILL work for your machine. 4. If you DO NOT have continuity, this tether WILL NOT work for your machine, , NOTE: When selecting a kill switch be sure to check and see if you need a Normally Open or a Normally Closed switch. If you are not sure, check the wiring schematic for your machine. GK1011NC
1 on hand
More Info/Options for Gunnar Red Tether Kill Switch, Normally Closed GK1011NC
Off Road - Electrical - Switches
|
|
|
|
$37.99
Gunnar Tether Kill Switch, Normally Open 1010
Manufacturer: Gunnar
Dennis Kirk Part #: 210428
Gunnar Tether Kill Switch, Normally Open: Manufacturer part # 1010 - Tether kill switch is easy to install - plugs into most machines. Narrow design, installs on slightly curved portion of the bars. Housing O-ring weatherproofed. Matching lanyard included. Replacement lanyard available separately. This tether is normally open. To see if this is correct for your machine you must perform the following test. 1. Locate the two wires going to your machine's kill switch. 2. With the kill switch in the run position, test for continuity between the two wires. 3. If you DO NOT have continuity, this tether switch WILL work for your machine. 4. If you DO have continuity, this tether WILL NOT work for your machine, , NOTE: When selecting a kill switch be sure to check and see if you need a Normally Open or a Normally Closed switch. If you are not sure, check the wiring schematic for your machine. 1010
2 on hand
More Info/Options for Gunnar Tether Kill Switch, Normally Open 1010
Off Road - Electrical - Switches
|
|
|
|
$37.99
Gunnar Tether Kill Switch, Normally Open 1012
Manufacturer: Gunnar
Dennis Kirk Part #: 210427
Gunnar Tether Kill Switch, Normally Open: Manufacturer part # 1012 - Tether kill switch is easy to install - plugs into most machines. Narrow design, installs on slightly curved portion of the bars. Housing O-ring weatherproofed. Matching lanyard included. Replacement lanyard available separately. This tether is normally open. To see if this is correct for your machine you must perform the following test. 1. Locate the two wires going to your machine's kill switch. 2. With the kill switch in the run position, test for continuity between the two wires. 3. If you DO NOT have continuity, this tether switch WILL work for your machine. 4. If you DO have continuity, this tether WILL NOT work for your machine, , NOTE: When selecting a kill switch be sure to check and see if you need a Normally Open or a Normally Closed switch. If you are not sure, check the wiring schematic for your machine. 1012
Expected Soon
More Info/Options for Gunnar Tether Kill Switch, Normally Open 1012
Off Road - Electrical - Switches
|
|
|
|
$17.99
K & S Hydraulic Brake Light Switch 12-0010
Manufacturer: K & S
Dennis Kirk Part #: 210369
K & S Hydraulic Brake Light Switch: Manufacturer part # 12-0010 - Two switches for most Japanese and European motorcycles. PART NO. 21-0369 fits front and rear brake master cylinders on most Japanese street and off-road motorcycles; 10mm dia. x 1.25mm thread pitch. PART NO. 21-0370 fits most European motorcycles; 10mm dia. x 1.00mm thread pitch. Both feature 20 in. long wires with terminals. Single bleed.. 12-0010
More than 10 on hand
More Info/Options for K & S Hydraulic Brake Light Switch 12-0010
Off Road - Electrical - Switches
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
