Metric Bikes - Men's Apparel - Electric Clothing

$14.99 Widder Lectric-Heat Battery Cord 45 inch L
Manufacturer: Widder Lectric-Heat
Dennis Kirk Part #: H35102
Widder Lectric-Heat Battery Cord 45 inch: Manufacturer part # L - The connection for Widders Lectric systems to your motorcycle electrical system is made easy with these two-lead battery cords. Simply connect the wire with the fuse in it to the hot (+) our undergrounded terminal of the battery and the remaining wire to the grounded (-) terminal of the battery; choose 19" or 45" cord.. L
1 on hand

More Info/Options for Widder Lectric-Heat Battery Cord 45 inch L

Metric Bikes - Men's Apparel - Electric Clothing

$91.99 Widder Lectric-Heat BMW Cord Coiled N4
Manufacturer: Widder Lectric-Heat
Dennis Kirk Part #: H35128
Widder Lectric-Heat BMW Cord Coiled: Manufacturer part # N4 - Designed to be plugged into an accessory outlet on a BMW. Thermostat cord is longer to be easily accessed through a jacket pocket worn over Lectric vest, and controls the temperature setting of the electronic thermostat. Features a coiled cord.. N4
1 on hand

More Info/Options for Widder Lectric-Heat BMW Cord Coiled N4

Metric Bikes - Men's Apparel - Electric Clothing

$14.99 Widder Lectric-Heat Glove Wiring Harness For Use With Pre-System Vest O
Manufacturer: Widder Lectric-Heat
Dennis Kirk Part #: H35121
Widder Lectric-Heat Glove Wiring Harness For Use With Pre-System Vest: Manufacturer part # O - The wires are routed the same as the Wiring Harness For Use Without Vest, however the section that had the switch now has a double-plug assembly. The female connector will plug into the vest, while the remaining male connector will plug into either a Switch Cord or Thermostat Cord which will control both the vest and gloves together. If Lectric-Chaps are also being worn, the same double-plug assembly on the caps will plug on here also. Whatever combination of gear you are wearing, you will still only have one plug disconnect when leaving the bike.. O
1 on hand

More Info/Options for Widder Lectric-Heat Glove Wiring Harness For Use With Pre-System Vest O

Metric Bikes - Men's Apparel - Electric Clothing

$14.99 Widder Lectric-Heat Glove Wiring Harness use without Arm Chaps O2
Manufacturer: Widder Lectric-Heat
Dennis Kirk Part #: H35122
Widder Lectric-Heat Glove Wiring Harness use without Arm Chaps: Manufacturer part # O2 - Designed for use with the Lectric-vest System II. Wires are routed the same as the wiring harness for use without a vest but now has a double-plug assembly. The female connector will plug into the vest, while the remaining male connector will plug into either a switch cord or thermostat cord, which will control both the vest and gloves together. If Lectric-chaps are also being worn, the same double-plug assembly on the chaps will plug on here also.. O2
5 on hand

More Info/Options for Widder Lectric-Heat Glove Wiring Harness use without Arm Chaps O2

Metric Bikes - Men's Apparel - Electric Clothing

$27.99 Widder Lectric-Heat Switch Cord BMW M4
Manufacturer: Widder Lectric-Heat
Dennis Kirk Part #: H35124
Widder Lectric-Heat Switch Cord BMW: Manufacturer part # M4 - Designed to be plugged into an accessory outlet on a BMW. Switch cord connects to the Lectric vest and controls temperature with an on/off switch. Features a coiled cord.. M4
1 on hand

More Info/Options for Widder Lectric-Heat Switch Cord BMW M4

Metric Bikes - Men's Apparel - Electric Clothing

$33.99 Widder Lectric-Heat Thermostat Cord (Bimetal) N
Manufacturer: Widder Lectric-Heat
Dennis Kirk Part #: H35125
Widder Lectric-Heat Thermostat Cord (Bimetal): Manufacturer part # N - Thermostat cords are similar to the switch cords; however, the thermostat cord is longer so that it can reach a pocket in the jacket thats worn over a vest. Adjust heat flow by turning the knob without having to enter the pocket.. N
1 on hand

More Info/Options for Widder Lectric-Heat Thermostat Cord (Bimetal) N

Metric Bikes - Men's Apparel - Electric Clothing

$81.99 Widder Lectric-Heat Widder Arm Chaps AC
Manufacturer: Widder Lectric-Heat
Dennis Kirk Part #: H3510026
Widder Lectric-Heat Widder Arm Chaps: Manufacturer part # AC - Arm Length as measured from top vertebrae to 2 inches above the wrist. , , Fits Vest size 36 with Arm Length 23in,24in. Fits Vest Size 38 with Arm Length 23in,24in,25in. Fits Vest Size 40 with Arm Length 24in,25in. Fits Vest Size 42 with Arm Length 24in,25in. Fits Vest Size 44 with Arm Length 24in,25in. Fits Vest Size 46 with Arm Length 25in,26in. Fits Vest Size 48 with Arm Length 25in,26in. Fits Vest Size 50 with Arm Length 25in,26in. Fits Vest Size 52 with Arm Length 25in,26in. Fits Vest Size 56 with Arm Length 26in,27in.. AC
3 on hand

More Info/Options for Widder Lectric-Heat Widder Arm Chaps AC

Metric Bikes - Men's Apparel - Electric Clothing

$81.99 Widder Lectric-Heat Widder Arm Chaps AC H3510030
Manufacturer: Widder Lectric-Heat
Dennis Kirk Part #: H3510030
Widder Lectric-Heat Widder Arm Chaps: Manufacturer part # AC - DennisKirk Part # H3510030 - Arm Length as measured from top vertebrae to 2 inches above the wrist. , , Fits Vest size 36 with Arm Length 27in,28in. Fits Vest Size 38 with Arm Length 28in,29in. Fits Vest Size 40 with Arm Length 28in,29in. Fits Vest Size 42 with Arm Length 28in,29in. Fits Vest Size 44 with Arm Length 28in,29in. Fits Vest Size 46 with Arm Length 29in,30in. Fits Vest Size 48 with Arm Length 29in,30in. Fits Vest Size 50 with Arm Length 29in,30in. Fits Vest Size 52 with Arm Length 29in,30in. Fits Vest Size 56 with Arm Length 30in,31in.. AC
3 on hand

More Info/Options for Widder Lectric-Heat Widder Arm Chaps AC H3510030

Metric Bikes - Men's Apparel - Electric Clothing

$81.99 Widder Lectric-Heat Widder Arm Chaps AC H3510032
Manufacturer: Widder Lectric-Heat
Dennis Kirk Part #: H3510032
Widder Lectric-Heat Widder Arm Chaps: Manufacturer part # AC - DennisKirk Part # H3510032 - Arm Length as measured from top vertebrae to 2 inches above the wrist. , , Fits Vest size 36 with Arm Length 29in,30in. Fits Vest Size 38 with Arm Length 30in,31in. Fits Vest Size 40 with Arm Length 30in,31in. Fits Vest Size 42 with Arm Length 30in,31in. Fits Vest Size 44 with Arm Length 30in,31in. Fits Vest Size 46 with Arm Length 31in,32in. Fits Vest Size 48 with Arm Length 31in,32in. Fits Vest Size 50 with Arm Length 31in,32in. Fits Vest Size 52 with Arm Length 31in,32in. Fits Vest Size 56 with Arm Length 32in,33in.. AC
1 on hand

More Info/Options for Widder Lectric-Heat Widder Arm Chaps AC H3510032

Metric Bikes - Men's Apparel - Electric Clothing

$81.99 Widder Lectric-Heat Widder Arm Chaps AC H3510034
Manufacturer: Widder Lectric-Heat
Dennis Kirk Part #: H3510034
Widder Lectric-Heat Widder Arm Chaps: Manufacturer part # AC - DennisKirk Part # H3510034 - Arm Length as measured from top vertebrae to 2 inches above the wrist. , , Fits Vest size 36 with Arm Length 31in,32in. Fits Vest Size 38 with Arm Length 32in,33in. Fits Vest Size 40 with Arm Length 32in,33in. Fits Vest Size 42 with Arm Length 32in,33in. Fits Vest Size 44 with Arm Length 32in,33in. Fits Vest Size 46 with Arm Length 33in,34in. Fits Vest Size 48 with Arm Length 33in,34in. Fits Vest Size 50 with Arm Length 33in,34in. Fits Vest Size 52 with Arm Length 33in,34in. Fits Vest Size 56 with Arm Length 34in,35in.. AC
4 on hand

More Info/Options for Widder Lectric-Heat Widder Arm Chaps AC H3510034

Metric Bikes - Men's Apparel - Electric Clothing

$13.99 Widder Lectric-Heat Widder Battery Cord 19 inch K
Manufacturer: Widder Lectric-Heat
Dennis Kirk Part #: H35101
Widder Lectric-Heat Widder Battery Cord 19 inch: Manufacturer part # K - The connection for Widders Lectric systems to your motorcycle electrical system is made easy with these two-lead battery cords. Simply connect the wire with the fuse in it to the hot (+) our undergrounded terminal of the battery and the remaining wire to the grounded (-) terminal of the battery; choose 19" or 45" cord.. K
3 on hand

More Info/Options for Widder Lectric-Heat Widder Battery Cord 19 inch K

Metric Bikes - Men's Apparel - Electric Clothing

$131.99 Widder Lectric-Heat Widder System 2 Lectric-vest S2
Manufacturer: Widder Lectric-Heat
Dennis Kirk Part #: H3525036
Widder Lectric-Heat Widder System 2 Lectric-vest: Manufacturer part # S2 - Features a heated collar with Ultrasuede lining, heated pockets, a dual-slide zipper and accepts Arm Chaps. Constructed of 100% polyester outer shell, 100% nylon lining and 65% polyolefin/35% Thinsulate insulation. Includes male plug in front inside bottom and is not visible. Can be used alone but requires one battery cord, either PART NO. H35-101 (19" L) or PART NO. H35-102 (45" L), with a switch cord (on/off only) PART NO. H35-123 or a thermostat cord (contains "off" with temperature control settings of 1-7). Three different thermostat cords are offered. Bi-metal cord PART NO. H35-125 features a non-coiled, 21" wire with male connector and 18" wire with female connector; it has mechanical-type switch and no circuitry; the control unit measures 3 3/4" L x 2 1/4" W x 13/16" D; this unit has an off position with dial temperature control settings of 1-7. Electronic thermostat cord PART NO. H35-127 features a 9" coiled, 7" straight cord with male connector on one side of the control box; control box is 2.635" L x .875" W x 1.25" D; this unit has an off position with dial temperature settings of 1-7; this unit has a 12V/10 amp maximum rating. Electronic thermostat cord (non-coiled) PART NO. H35-126 is the same as above, except it features a 16" straight cord. Vest can be plugged directly into leg chaps without any additional cords. Vest can be snapped into arm chaps PART NO. H35-150- with the use of wiring harness PART NO. H35-122 and includes two 35" cords; one end has a female connector and the other end has two electrical snap connectors measuring 33" and 35". Available in even sizes 36-52 and 56.. S2
3 on hand

More Info/Options for Widder Lectric-Heat Widder System 2 Lectric-vest S2

Metric Bikes - Men's Apparel - Electric Clothing

$131.99 Widder Lectric-Heat Widder System 2 Lectric-vest S2 H3525038
Manufacturer: Widder Lectric-Heat
Dennis Kirk Part #: H3525038
Widder Lectric-Heat Widder System 2 Lectric-vest: Manufacturer part # S2 - DennisKirk Part # H3525038 - Features a heated collar with Ultrasuede lining, heated pockets, a dual-slide zipper and accepts Arm Chaps. Constructed of 100% polyester outer shell, 100% nylon lining and 65% polyolefin/35% Thinsulate insulation. Includes male plug in front inside bottom and is not visible. Can be used alone but requires one battery cord, either PART NO. H35-101 (19" L) or PART NO. H35-102 (45" L), with a switch cord (on/off only) PART NO. H35-123 or a thermostat cord (contains "off" with temperature control settings of 1-7). Three different thermostat cords are offered. Bi-metal cord PART NO. H35-125 features a non-coiled, 21" wire with male connector and 18" wire with female connector; it has mechanical-type switch and no circuitry; the control unit measures 3 3/4" L x 2 1/4" W x 13/16" D; this unit has an off position with dial temperature control settings of 1-7. Electronic thermostat cord PART NO. H35-127 features a 9" coiled, 7" straight cord with male connector on one side of the control box; control box is 2.635" L x .875" W x 1.25" D; this unit has an off position with dial temperature settings of 1-7; this unit has a 12V/10 amp maximum rating. Electronic thermostat cord (non-coiled) PART NO. H35-126 is the same as above, except it features a 16" straight cord. Vest can be plugged directly into leg chaps without any additional cords. Vest can be snapped into arm chaps PART NO. H35-150- with the use of wiring harness PART NO. H35-122 and includes two 35" cords; one end has a female connector and the other end has two electrical snap connectors measuring 33" and 35". Available in even sizes 36-52 and 56.. S2
2 on hand

More Info/Options for Widder Lectric-Heat Widder System 2 Lectric-vest S2 H3525038

Metric Bikes - Men's Apparel - Electric Clothing

$131.99 Widder Lectric-Heat Widder System 2 Lectric-vest S2 H3525042
Manufacturer: Widder Lectric-Heat
Dennis Kirk Part #: H3525042
Widder Lectric-Heat Widder System 2 Lectric-vest: Manufacturer part # S2 - DennisKirk Part # H3525042 - Features a heated collar with Ultrasuede lining, heated pockets, a dual-slide zipper and accepts Arm Chaps. Constructed of 100% polyester outer shell, 100% nylon lining and 65% polyolefin/35% Thinsulate insulation. Includes male plug in front inside bottom and is not visible. Can be used alone but requires one battery cord, either PART NO. H35-101 (19" L) or PART NO. H35-102 (45" L), with a switch cord (on/off only) PART NO. H35-123 or a thermostat cord (contains "off" with temperature control settings of 1-7). Three different thermostat cords are offered. Bi-metal cord PART NO. H35-125 features a non-coiled, 21" wire with male connector and 18" wire with female connector; it has mechanical-type switch and no circuitry; the control unit measures 3 3/4" L x 2 1/4" W x 13/16" D; this unit has an off position with dial temperature control settings of 1-7. Electronic thermostat cord PART NO. H35-127 features a 9" coiled, 7" straight cord with male connector on one side of the control box; control box is 2.635" L x .875" W x 1.25" D; this unit has an off position with dial temperature settings of 1-7; this unit has a 12V/10 amp maximum rating. Electronic thermostat cord (non-coiled) PART NO. H35-126 is the same as above, except it features a 16" straight cord. Vest can be plugged directly into leg chaps without any additional cords. Vest can be snapped into arm chaps PART NO. H35-150- with the use of wiring harness PART NO. H35-122 and includes two 35" cords; one end has a female connector and the other end has two electrical snap connectors measuring 33" and 35". Available in even sizes 36-52 and 56.. S2
9 on hand

More Info/Options for Widder Lectric-Heat Widder System 2 Lectric-vest S2 H3525042

Metric Bikes - Men's Apparel - Electric Clothing

$131.99 Widder Lectric-Heat Widder System 2 Lectric-vest S2 H3525044
Manufacturer: Widder Lectric-Heat
Dennis Kirk Part #: H3525044
Widder Lectric-Heat Widder System 2 Lectric-vest: Manufacturer part # S2 - DennisKirk Part # H3525044 - Features a heated collar with Ultrasuede lining, heated pockets, a dual-slide zipper and accepts Arm Chaps. Constructed of 100% polyester outer shell, 100% nylon lining and 65% polyolefin/35% Thinsulate insulation. Includes male plug in front inside bottom and is not visible. Can be used alone but requires one battery cord, either PART NO. H35-101 (19" L) or PART NO. H35-102 (45" L), with a switch cord (on/off only) PART NO. H35-123 or a thermostat cord (contains "off" with temperature control settings of 1-7). Three different thermostat cords are offered. Bi-metal cord PART NO. H35-125 features a non-coiled, 21" wire with male connector and 18" wire with female connector; it has mechanical-type switch and no circuitry; the control unit measures 3 3/4" L x 2 1/4" W x 13/16" D; this unit has an off position with dial temperature control settings of 1-7. Electronic thermostat cord PART NO. H35-127 features a 9" coiled, 7" straight cord with male connector on one side of the control box; control box is 2.635" L x .875" W x 1.25" D; this unit has an off position with dial temperature settings of 1-7; this unit has a 12V/10 amp maximum rating. Electronic thermostat cord (non-coiled) PART NO. H35-126 is the same as above, except it features a 16" straight cord. Vest can be plugged directly into leg chaps without any additional cords. Vest can be snapped into arm chaps PART NO. H35-150- with the use of wiring harness PART NO. H35-122 and includes two 35" cords; one end has a female connector and the other end has two electrical snap connectors measuring 33" and 35". Available in even sizes 36-52 and 56.. S2
1 on hand

More Info/Options for Widder Lectric-Heat Widder System 2 Lectric-vest S2 H3525044

Metric Bikes - Men's Apparel - Electric Clothing

$131.99 Widder Lectric-Heat Widder System 2 Lectric-vest S2 H3525046
Manufacturer: Widder Lectric-Heat
Dennis Kirk Part #: H3525046
Widder Lectric-Heat Widder System 2 Lectric-vest: Manufacturer part # S2 - DennisKirk Part # H3525046 - Features a heated collar with Ultrasuede lining, heated pockets, a dual-slide zipper and accepts Arm Chaps. Constructed of 100% polyester outer shell, 100% nylon lining and 65% polyolefin/35% Thinsulate insulation. Includes male plug in front inside bottom and is not visible. Can be used alone but requires one battery cord, either PART NO. H35-101 (19" L) or PART NO. H35-102 (45" L), with a switch cord (on/off only) PART NO. H35-123 or a thermostat cord (contains "off" with temperature control settings of 1-7). Three different thermostat cords are offered. Bi-metal cord PART NO. H35-125 features a non-coiled, 21" wire with male connector and 18" wire with female connector; it has mechanical-type switch and no circuitry; the control unit measures 3 3/4" L x 2 1/4" W x 13/16" D; this unit has an off position with dial temperature control settings of 1-7. Electronic thermostat cord PART NO. H35-127 features a 9" coiled, 7" straight cord with male connector on one side of the control box; control box is 2.635" L x .875" W x 1.25" D; this unit has an off position with dial temperature settings of 1-7; this unit has a 12V/10 amp maximum rating. Electronic thermostat cord (non-coiled) PART NO. H35-126 is the same as above, except it features a 16" straight cord. Vest can be plugged directly into leg chaps without any additional cords. Vest can be snapped into arm chaps PART NO. H35-150- with the use of wiring harness PART NO. H35-122 and includes two 35" cords; one end has a female connector and the other end has two electrical snap connectors measuring 33" and 35". Available in even sizes 36-52 and 56.. S2
9 on hand

More Info/Options for Widder Lectric-Heat Widder System 2 Lectric-vest S2 H3525046

Metric Bikes - Men's Apparel - Electric Clothing

$131.99 Widder Lectric-Heat Widder System 2 Lectric-vest S2 H3525048
Manufacturer: Widder Lectric-Heat
Dennis Kirk Part #: H3525048
Widder Lectric-Heat Widder System 2 Lectric-vest: Manufacturer part # S2 - DennisKirk Part # H3525048 - Features a heated collar with Ultrasuede lining, heated pockets, a dual-slide zipper and accepts Arm Chaps. Constructed of 100% polyester outer shell, 100% nylon lining and 65% polyolefin/35% Thinsulate insulation. Includes male plug in front inside bottom and is not visible. Can be used alone but requires one battery cord, either PART NO. H35-101 (19" L) or PART NO. H35-102 (45" L), with a switch cord (on/off only) PART NO. H35-123 or a thermostat cord (contains "off" with temperature control settings of 1-7). Three different thermostat cords are offered. Bi-metal cord PART NO. H35-125 features a non-coiled, 21" wire with male connector and 18" wire with female connector; it has mechanical-type switch and no circuitry; the control unit measures 3 3/4" L x 2 1/4" W x 13/16" D; this unit has an off position with dial temperature control settings of 1-7. Electronic thermostat cord PART NO. H3