|
|
$145.90
Abrew Weld on Gas Tank Extensions 182740
Dennis Kirk Part #: 182740
Abrew Weld on Gas Tank Extensions 182740: Economical way to get the look of stretched gas tanks. Extends the rear of the tank 6 inches. Curved to match the tanks natural curves. Does not increase gas tank capacity. NOTE: Installation is recommended for experienced professionals only. If tanks have a sealer in them, installation will cause the sealer to peel from tank. Remember to pressure check tanks before resealing and painting..
2 on Hand
More Info/Options for Abrew Weld on Gas Tank Extensions 182740
|
|
|
|
$145.90
Abrew Weld on Gas Tank Extensions 182741
Dennis Kirk Part #: 182741
Abrew Weld on Gas Tank Extensions 182741: Economical way to get the look of stretched gas tanks. Extends the rear of the tank 6 inches. Curved to match the tanks natural curves. Does not increase gas tank capacity. NOTE: Installation is recommended for experienced professionals only. If tanks have a sealer in them, installation will cause the sealer to peel from tank. Remember to pressure check tanks before resealing and painting..
1 on Hand
More Info/Options for Abrew Weld on Gas Tank Extensions 182741
|
|
|
|
$145.90
Abrew Weld on Gas Tank Extensions 182742
Dennis Kirk Part #: 182742
Abrew Weld on Gas Tank Extensions 182742: Economical way to get the look of stretched gas tanks. Extends the rear of the tank 6 inches. Curved to match the tanks natural curves. Does not increase gas tank capacity. NOTE: Installation is recommended for experienced professionals only. If tanks have a sealer in them, installation will cause the sealer to peel from tank. Remember to pressure check tanks before resealing and painting..
2 on Hand
More Info/Options for Abrew Weld on Gas Tank Extensions 182742
|
|
|
|
$474.99
Custom Chrome Bobber Style Gas Tank 183354
Dennis Kirk Part #: 183354
Custom Chrome Bobber Style Gas Tank 183354: Manufacturer part # 600157 - An absolutely beautiful new tank designed with keen styling of Cole Foster Salinas Boyz Customs. The tank started a life on the hugely popular Blue Bobber Bike, seen in almost every motorcycle publication in 2002. The tank features a mini pop-up gas cap, and a unique raised tapered bead down the center of the tank. Each tank has been designed to fit to stock frames but can also be easily adapted to any custom application. Fuel capacity is 2.35 gallons. Accepts 22mm petcock. NOTE: The applications require the front frame dash mount to be cut off and rear screw hole modified DIMENISIONS: Length: 17 1/4 in.. Width: 11 1/2 in.. Tunnel Length: 19 in.. TUNNEL WIDTH: Front: 2 11/16 in.. Rear: 2 3/4 in.. TUNNEL DEPTH Front: 6 1/4 in.. Rear: 1/4 in.. Tank Height: 10 1/2 in. Fuel Petcock: Left Front Petcock Thread Size: 22mm Gas Cap Type: Threaded INCLUDED ITEMS: One tank. Four rubber isolation pads. One front tank mount with bolts. Six mounting shims. Four 5/16" - 18 x 1-1/4" hex bolts. Six 5/16" flat washers. Two spacer washers. One pop-up threaded gas cap), , WARNING: , All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. 600157
1 on Hand
More Info/Options for Custom Chrome Bobber Style Gas Tank 183354
|
|
|
|
$474.99
Custom Chrome Bobber Style Gas Tank 183355
Dennis Kirk Part #: 183355
Custom Chrome Bobber Style Gas Tank 183355: Manufacturer part # 600154 - An absolutely beautiful new tank designed with keen styling of Cole Foster Salinas Boyz Customs. The tank started a life on the hugely popular Blue Bobber Bike, seen in almost every motorcycle publication in 2002. The tank features a mini pop-up gas cap, and a unique raised tapered bead down the center of the tank. Each tank has been designed to fit to stock frames but can also be easily adapted to any custom application. Fuel capacity is 2.35 gallons. Accepts 22mm petcock. NOTE: The applications require the front frame dash mount to be cut off and rear screw hole modified DIMENISIONS: Length: 17 1/4 in.. Width: 11 1/2 in.. Tunnel Length: 19 in.. TUNNEL WIDTH: Front: 2 11/16 in.. Rear: 2 3/4 in.. TUNNEL DEPTH Front: 6 1/4 in.. Rear: 1/4 in.. Tank Height: 10 1/2 in. Fuel Petcock: Left Front Petcock Thread Size: 22mm Gas Cap Type: Threaded INCLUDED ITEMS: One tank. Four rubber isolation pads. One front tank mount with bolts. Six mounting shims. Four 5/16" - 18 x 1-1/4" hex bolts. Six 5/16" flat washers. Two spacer washers. One pop-up threaded gas cap), , WARNING: , All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. 600154
1 on Hand
More Info/Options for Custom Chrome Bobber Style Gas Tank 183355
|
|
|
|
$293.99
Custom Chrome Custom Bobber Style Gas Tank 183257
Dennis Kirk Part #: 183257
Custom Chrome Custom Bobber Style Gas Tank 183257: Manufacturer part # 600155 - An absolutely beautiful new tank designed with keen styling of Cole Foster Salinas Boyz Customs. The tank started a life on the hugely popular Blue Bobber Bike, seen in almost every motorcycle publication in 2002. The tank features a mini pop-up gas cap, and a unique raised tapered bead down the center of the tank. Each tank has been designed to fit to stock frames but can also be easily adapted to any custom application. Fuel capacity is 2.35 gallons. NOTE: The applications require the front frame dash mount to be cut off and rear screw hole modified DIMENISIONS: Length: 17 1/4 in.. Width: 11 1/2 in.. Tunnel Length: 19 in.. TUNNEL WIDTH: Front: 2 11/16 in.. Rear: 2 3/4 in.. TUNNEL DEPTH Front: 6 1/4 in.. Rear: 1/4 in.. Tank Height: 10 1/2 in. Fuel Petcock: Left Front Petcock Thread Size: 22mm Gas Cap Type: Threaded INCLUDED ITEMS: One tank. Four rubber isolation pads. One front tank mount with bolts. Six mounting shims. Four 5/16" - 18 x 1-1/4" hex bolts. Six 5/16" flat washers. Two spacer washers. One pop-up threaded gas cap. , , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 600155
Expected Soon
More Info/Options for Custom Chrome Custom Bobber Style Gas Tank 183257
|
|
|
|
$309.99
Custom Chrome Indian Larry Dished Tank 183258
Dennis Kirk Part #: 183258
Custom Chrome Indian Larry Dished Tank 183258: Manufacturer part # 670801 - As seen on TV. These are the tanks used on the Indian Larry bike in the build-off series. Old-school looks with modern production techniques bring you the cool style you and at the price you can afford. Comes in 3.5-gallon size using late model 22mm fuel valves. Easy mounting by drilling of the backbone and can be adapted to many styles of stock and custom frames. DIMENISIONS: Length: 17 3/4 in.. Width: 12 1/4 in.. Tunnel Length: 15 1/2 in.. TUNNEL WIDTH: Front: 2 1/2 in.. Rear: 2 3/8 in.. TUNNEL DEPTH Front: 2 1/4 in.. Rear: 1/2 in.. Tank Height: 8 3/4 in. Fuel Petcock: Right Rear Petcock Thread Size: 22mm Gas Cap Type: Cam Style, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 670801
1 on Hand
More Info/Options for Custom Chrome Indian Larry Dished Tank 183258
|
|
|
|
$292.99
Custom Chrome Indian Larry Dished Tank 183356
Dennis Kirk Part #: 183356
Custom Chrome Indian Larry Dished Tank 183356: Manufacturer part # 670800 - Used on the Indian Larry bike in the build-off series. Uses late-model 22mm fuel valves. Easy mounting by drilling of the backbone and can be adapted to many styles of stock and custom frames. Cam-style gas cap. DIMENISIONS: Length: 16 in.. Width: 10-1/2 in.. Tunnel Length: 15-1/2 in.. TUNNEL WIDTH: Front: 2-3/4 in.. Rear: 2 in.. TUNNEL DEPTH Front: 2 1/4 in.. Rear: 2 in.. Tank Height: 11 in. Fuel Petcock: Right Rear Petcock Thread Size: 22mm Gas Cap Type: Cam Style, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 670800
1 on Hand
More Info/Options for Custom Chrome Indian Larry Dished Tank 183356
|
|
|
|
$359.95
Drag Specialties 2 in. Extended Dash Style Gas Tank w/1 Screw Bung and Dummy Bung for OEM Gas Gauge 183249
Dennis Kirk Part #: 183249
Drag Specialties 2 in. Extended Dash Style Gas Tank w/1 Screw Bung and Dummy Bung for OEM Gas Gauge 183249: Manufacturer part # 012844 - 2" extended-length tanks are made from 16-gauge stamped steel. 5.1 gallon capacity. Available in dash-style design with provisions for mounting stock-style dash and ignition switch (not included). Screw-in cap tanks require the use of 82-E96 gas caps (sold separately). Tanks with fuel gauge bungs accept OEM-style or aftermarket fuel gauges. Uses 22mm petcock. , , NOTE: Seat nose may require modification to fit properly with extended tanks, , NOTE: For Softail models 01-07 with fuel injection and Softail models 04-06 with carb (except FXSTD), , NOTE: Requires the use of petcock adapter OEM NO. 62842-00 or DK Part No. 182865 when used in listed carb applications, , WARNING: , All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems DIMENISIONS: Length: 21 in.. Width: 17 in.. Tunnel Length 18-3/4 in.. TUNNEL WIDTH: Front: 3-1/16 in.. Rear: 2-3/8 in.. TUNNEL DEPTH: Front: 6-1/2 in.. Rear: 1-1/4 in.. Tank Height: 9-1/4 in.. Fuel Petcock: Rear Left. Petcock thread size: 22mm. Gas cap type: Threaded.. 012844
1 on Hand
More Info/Options for Drag Specialties 2 in. Extended Dash Style Gas Tank w/1 Screw Bung and Dummy Bung for OEM Gas Gauge 183249
|
|
|
|
$359.95
Drag Specialties 2 in. Extended Dash Style Gas Tank w/2 Screw Bungs 183248
Dennis Kirk Part #: 183248
Drag Specialties 2 in. Extended Dash Style Gas Tank w/2 Screw Bungs 183248: Manufacturer part # 012835 - 2" extended-length tanks are made from 16-gauge stamped steel. 5.1 gallon capacity. Dash-style design with provisions for mounting stock-style dash and ignition switch (not included). Screw-in cap tanks require the use of 82-E96 gas caps (sold separately). Uses 22mm petcock. , , NOTE: Seat nose may require modification to fit properly with extended tanks, , NOTE: For Softail models 01-07 with fuel injection and Softail models 04-06 with carb (except FXSTD), , NOTE: Requires the use of petcock adapter OEM NO. 62842-00 or DK Part No. 182865 when used in listed carb applications, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems, , DIMENISIONS: Length: 20-1/2 in.. Width: 17 in.. Tunnel Length 18-3/4 in.. TUNNEL WIDTH: Front: 3-1/16 in.. Rear: 2-3/8 in.. TUNNEL DEPTH: Front: 6-1/2 in.. Rear: 1-1/4 in.. Tank Height: 9-1/4 in.. Fuel Petcock: Rear Left. Petcock thread size: 22mm. Gas cap type: Threaded.. 012835
1 on Hand
More Info/Options for Drag Specialties 2 in. Extended Dash Style Gas Tank w/2 Screw Bungs 183248
|
|
|
|
$325.95
Drag Specialties Extended Gas Tank 182862
Dennis Kirk Part #: 182862
Drag Specialties Extended Gas Tank 182862: Manufacturer part # 12802 - Higher capacity (approximately 4 gallon) 2 in. extended tanks. Mounts to stock location, requires use of a 04-06 XL Custom seat or equivalent nose shape. Accepts a 22mm petcock and late-style screw-in cap (sold separately), , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 12802
9 on Hand
More Info/Options for Drag Specialties Extended Gas Tank 182862
|
|
|
|
$1234.99
Eddie Trottas Thunder Design D-2 Gas Tank 183342
Dennis Kirk Part #: 183342
Eddie Trottas Thunder Design D-2 Gas Tank 183342: Manufacturer part # TC-478 - 16-gauge steel construction. This tank has sunken, hidden mounts. 3/8in. NPT petcock fittings. 13in. at widest point. Approximately 2in. tunnel width for use with 1 3/4in. tubing. Compatible with most Choppers and Pro-Street frames. Includes pop-up gas cap and recessed mounts, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. TC-478
Expected Soon
More Info/Options for Eddie Trottas Thunder Design D-2 Gas Tank 183342
|
|
|
|
$1234.99
Eddie Trottas Thunder Design D-2 Gas Tank 183343
Dennis Kirk Part #: 183343
Eddie Trottas Thunder Design D-2 Gas Tank 183343: Manufacturer part # TC-479 - 16-gauge steel construction. This tank has sunken, hidden mounts. 3/8in. NPT petcock fittings. 13in. at widest point. Approximately 2in. tunnel width for use with 1 3/4in. tubing. Compatible with most Choppers and Pro-Street frames. Includes pop-up gas cap and recessed mounts, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. TC-479
1 on Hand
More Info/Options for Eddie Trottas Thunder Design D-2 Gas Tank 183343
|
|
|
|
$199.99
H18010 Custom Chrome Fat Bob Standard Gas Tank 3.5 Gallon
Dennis Kirk Part #: H18010
H18010 Custom Chrome Fat Bob Standard Gas Tank 3.5 Gallon: Manufacturer part # 15289 - Available in 3.5 and 5.0 gallon versions. Designed with accurate, precision-placed mounting plates and stud bosses for easy installation on Big Twin 4-speed frames through 84 (except FXST). Assembled using low-temp welding procedures throughout for years of trouble-free service. Both tanks accept the dash for Low Rider models or the large speedo dash for FXWG models. Pre-82 cam-lock style filler necks allow use of the widest range of gas cap designs. 13/16 in. external-thread fuel valve connections for OE-style gas valves or high-volume fuel valves. Shipped in a divided box for protection. Unpainted steel. Replaces OEM numbers 61218-67A, 61426-67A, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 15289
1 on Hand
More Info/Options for H18010 Custom Chrome Fat Bob Standard Gas Tank 3.5 Gallon
|
|
|
|
$90.99
H18015 Custom Chrome Standard Gas Tank
Dennis Kirk Part #: H18015
H18015 Custom Chrome Standard Gas Tank: Manufacturer part # 12724 - Accurate reproduction of original equipment gas tank for early Sportster and K models. Fits all models 55-78 and has a 2.4 gallon capacity. Unpainted steel, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 12724
8 on Hand
More Info/Options for H18015 Custom Chrome Standard Gas Tank
|
|
|
|
$125.99
H18016 Custom Chrome High Tunnel King Tank
Dennis Kirk Part #: H18016
H18016 Custom Chrome High Tunnel King Tank: Manufacturer part # 19639 - King tanks are made 2 in. wider than stock. Provides extra mileage and is just wide enough to make it look great. 3.1 gallon, high-tunnel tanks are equipped with stock mounts that bolt to the stock frame mounts. 3.5 gallon, low-tunnel tank has tab mounts for universal custom applications. Unpainted steel, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 19639
5 on Hand
More Info/Options for H18016 Custom Chrome High Tunnel King Tank
|
|
|
|
$179.99
H18022 Custom Chrome Fat Bob Screw Top Gas Tank 3.5 Gallon
Dennis Kirk Part #: H18022
H18022 Custom Chrome Fat Bob Screw Top Gas Tank 3.5 Gallon: Manufacturer part # 15295 - Available in either 3.5 or 5.0 gallon version. Designed with accurate, precision-placed mounting plates and stud bosses for easy installation on Big Twin 4-speed frames through 84 (except FXST). Assembled using low-temp welding procedures throughout for trouble-free service. Both tanks accept both the dash for Low Rider models and the large speedo dash for FXWG models. Made with the 83-00 screw-on type filler necks to allow use of the widest range of gas cap designs. 13/16 in. external-thread fuel valve connections for OE-style gas valves or high-volume fuel valves. Unpainted steel. Replaces OEM numbers 61219-83, 61425-83, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 15295
2 on Hand
More Info/Options for H18022 Custom Chrome Fat Bob Screw Top Gas Tank 3.5 Gallon
|
|
|
|
$196.99
H18023 Custom Chrome Fat Bob Screw Top Gas Tank 5.0 Gallon
Dennis Kirk Part #: H18023
H18023 Custom Chrome Fat Bob Screw Top Gas Tank 5.0 Gallon: Manufacturer part # 15296 - Available in either 3.5 or 5.0 gallon version. Designed with accurate, precision-placed mounting plates and stud bosses for easy installation on Big Twin 4-speed frames through 84 (except FXST). Assembled using low-temp welding procedures throughout for trouble-free service. Both tanks accept both the dash for Low Rider models and the large speedo dash for FXWG models. Made with the 83-00 screw-on type filler necks to allow use of the widest range of gas cap designs. 13/16 in. external-thread fuel valve connections for OE-style gas valves or high-volume fuel valves. Unpainted steel. Replaces OEM numbers 61213-83, 61229-83, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 15296
2 on Hand
More Info/Options for H18023 Custom Chrome Fat Bob Screw Top Gas Tank 5.0 Gallon
|
|
|
|
$229.99
H18024 Custom Chrome Flatside Fat Bob Gas Tank
Dennis Kirk Part #: H18024
H18024 Custom Chrome Flatside Fat Bob Gas Tank: Manufacturer part # 15297 - Accurate reproductions of the latest Flatside Fat Bob gas tanks. Fits FXST 84 and all 85-99 models with split tanks. Use to replace OE parts suffering from terminal crash damage or to slim down from 5 gallon tanks to 3.5 gallon tanks. Unpainted steel. Replaces OEM numbers 61218-85, 61426-85, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 15297
1 on Hand
More Info/Options for H18024 Custom Chrome Flatside Fat Bob Gas Tank
|
|
|
|
$271.99
H18026 Custom Chrome Fat Bob Gas Tank
Dennis Kirk Part #: H18026
H18026 Custom Chrome Fat Bob Gas Tank: Manufacturer part # 25551 - Today, Custom Chrome is the worlds largest independent supplier of aftermarket parts and accessories Classic Fat Bob look for all FXR 92-94 models (except Dyna Glide). 4.0 gallon capacity. Looks like split tanks, but is actually a one-piece welded assembly with late-style twin screw top filler necks and 13/16 in. external-thread gas valve fittings. Bolts directly to the stock mounts and accepts all FL-style dash assemblies (except Cat Eye) when the appropriate dash base is used. Included with each tank is a super-flex speedo cable and chrome tank divider panel. Equipped with internal emission control system connections for use on vehicles with fuel tank emission devices (i.e. California models). Unpainted steel . , NOTE: , H18026 tank requires removal of solder from vent tube prior to installation when connecting fuel tank emission control device., , NOTE: , Speedo-cable supplied with tank will not fit our Drag Specialties 4 5/8 in 2-1 speedometers. If using the Drag Specialties speedometers a cable with a 12 mm nut must be pruchased separately from our front wheel speedometer cable chart., , NOTE: Tank does not include dash, speedometer, or gas caps, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 25551
5 on Hand
More Info/Options for H18026 Custom Chrome Fat Bob Gas Tank
|
|
