|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$365.99
Paul Yaffe Originals Chopper Custom Handlebar for 46 Degree Front Ends - Chrome 594301
Dennis Kirk Part #: 594301
Paul Yaffe Originals Chopper Custom Handlebar for 46 Degree Front Ends - Chrome 594301: Manufacturer part # 46CHB - Paul Yaffe Originals believe their products are the finest and most unique products available on the market. They use only the highest quality materials and manufacturing practices. Their designs are engineered on world class bikes built by Paul Yaffe and his talented crew. They know their products work because they are tested on their bikes before they are even considered for production The latest wild designs from the mind of Paul Yaffe. Designed to fit triple trees that have 3.5" center distance mounting holes. Chopper handlebars for 46 front ends are designed to fit front ends with at least a 46° rake and 3.5" centers in the triple trees. Standard Chopper handlebars fit most stock 73-06 models that use risers with 3.5" centers (except Springer Softails).. 46CHB
1 on Hand
More Info/Options for Paul Yaffe Originals Chopper Custom Handlebar for 46 Degree Front Ends - Chrome 594301
|
|
|
|
CLEARANCE!
Was: $520.99
Now: $208.40
Paul Yaffe Originals Custom Vengeance Fat Bar - Raw Finish 594314
Dennis Kirk Part #: 594314
Paul Yaffe Originals Custom Vengeance Fat Bar - Raw Finish 594314: Manufacturer part # RVBAR - The latest wild 1 1/4 in. bar designs from the mind of Paul Yaffe. Designed to fit triple trees that have 3.5" center distance mounting holes (except handlebar styles listed below). Chopper handlebars for 46 front ends are designed to fit front ends with at least a 46 rake and 3.5" centers in the triple trees. Standard Chopper handlebars fit most stock 73-05 models that use risers with 3.5" centers (except Springer Softails). Springer Chopper handlebars fit 88-02 Springer Softail models.. RVBAR
1 on Hand
More Info/Options for Paul Yaffe Originals Custom Vengeance Fat Bar - Raw Finish 594314
|
|
|
|
CLEARANCE!
Was: $664.99
Now: $266.00
Paul Yaffe Originals Custom Vengeance Fat Bar -Chrome 594313
Dennis Kirk Part #: 594313
Paul Yaffe Originals Custom Vengeance Fat Bar -Chrome 594313: Manufacturer part # VBAR - Paul Yaffe designs are engineered on world class bikes built by Paul Yaffe and his talented crew and their products work because they are tested on their bikes before they are even considered for production. The latest wild designs 1 1/4 in. bar from the mind of Paul Yaffe. Designed to fit triple trees that have 3.5" center distance mounting holes (except handlebar styles listed below). Chopper handlebars for 46 degrees front ends are designed to fit front ends with at least a 46 degrees rake and 3.5" centers in the triple trees. Standard Chopper handlebars fit most stock 73-05 models that use risers with 3.5" centers (except Springer Softails). Springer Chopper handlebars fit 88-02 Springer Softail models.. VBAR
1 on Hand
More Info/Options for Paul Yaffe Originals Custom Vengeance Fat Bar -Chrome 594313
|
|
|
|
|
|
|
|
$2276.99
10 in./8 in./Z & Custom/31 in. Custom Cycle All-Internal 1 1/4 in. Handlebars and Controls w/out Gauges
Dennis Kirk Part #: 594756
10 in./8 in./Z & Custom/31 in. Custom Cycle All-Internal 1 1/4 in. Handlebars and Controls w/out Gauges: Manufacturer part # STEALTH - Hide those ugly throttle cables and hoses. Includes fully-assembled chrome handlebar/control system that hides it all -- reservoirs, wires, throttle cables and hoses. Seven micro switches put all common controls at your fingertips: run/off, start, L&R turn signal, horn, hi/low beam via twist grip and brake light. Complete package includes everything you need: master cylinders, grips, dual cable internal throttle assembly, throttle lock, stainless braided hoses, brake fluid reservoir, clutch fluid reservoir, installation kit, riser mount kit. Extra-long throttle cables, hoses and switch wires make them easy to cut to length. Handlebars with gauges include speedometer, tachometer and indicator lights NOTE: These handlebars incorporate a hydraulic clutch system. Will require the use of a hydraulic clutch actuator or an in-line slave cylinder for proper installation. In-line slave allows for a hydraulic-to-cable conversion.. , , NOTE: Included master cylinder has approximately 20% more travel, therefore compensate fluid displacement with travel not diameter.. , , NOTE: This item ships 3-4 business days after order is placed. STEALTH
1 on Hand
More Info/Options for 10 in./8 in./Z & Custom/31 in. Custom Cycle All-Internal 1 1/4 in. Handlebars and Controls w/out Gauges
|
|
|
|
$2276.99
14.5 in./7 in./16 in./Ape Hanger/35 in. Custom Cycle All-Internal 1 1/4 in. Handlebars and Controls w/out Gauges
Dennis Kirk Part #: 594761
14.5 in./7 in./16 in./Ape Hanger/35 in. Custom Cycle All-Internal 1 1/4 in. Handlebars and Controls w/out Gauges: Manufacturer part # AP16 - Hide those ugly throttle cables and hoses. Includes fully-assembled chrome handlebar/control system that hides it all -- reservoirs, wires, throttle cables and hoses. Seven micro switches put all common controls at your fingertips: run/off, start, L&R turn signal, horn, hi/low beam via twist grip and brake light. Complete package includes everything you need: master cylinders, grips, dual cable internal throttle assembly, throttle lock, stainless braided hoses, brake fluid reservoir, clutch fluid reservoir, installation kit, riser mount kit. Extra-long throttle cables, hoses and switch wires make them easy to cut to length. Handlebars with gauges include speedometer, tachometer and indicator lights NOTE: These handlebars incorporate a hydraulic clutch system. Will require the use of a hydraulic clutch actuator or an in-line slave cylinder for proper installation. In-line slave allows for a hydraulic-to-cable conversion.. , , NOTE: Included master cylinder has approximately 20% more travel, therefore compensate fluid displacement with travel not diameter.. , , NOTE: This item ships 3-4 business days after order is placed. AP16
1 on Hand
More Info/Options for 14.5 in./7 in./16 in./Ape Hanger/35 in. Custom Cycle All-Internal 1 1/4 in. Handlebars and Controls w/out Gauges
|
|
|
|
CLOSEOUT!
Was: $241.99
Now: $181.49
4 in. LA Choppers BFL2 Bar w/Chopper Rake
Dennis Kirk Part #: 594701
4 in. LA Choppers BFL2 Bar w/Chopper Rake: Manufacturer part # Super BFL Bars - Same distinct style as the original BFL bars but re-tooled and redesigned. 1 1/4 in. tubing tapers to 1 in. at end; accept stock-type grips and controls. Brake and clutch sides are dimpled and clearanced to accept wiring and master cylinder; drilled for internal wiring. Available for stock bikes or chopper rake front ends. All bars are 32 in. wide with 8 in. pullback.. Super BFL Bars
1 on Hand
More Info/Options for 4 in. LA Choppers BFL2 Bar w/Chopper Rake
|
|
Harley-Davidson - Handlebars & Controls - 1in. Handlebars - with built-in risers
