|
|
$353.99
Crane Cams HI-4TC Ignition Module 201542
Dennis Kirk Part #: 201542
Crane Cams HI-4TC Ignition Module 201542: Manufacturer part # 83180 - Module works with J1850 data bus used for communications with instrument cluster and turn signal/security mode (TSM/TSSM). Connector is single 12-pin style. Works with stock to highly modified engines; wide timing advance adjustment range. Can digitally set rpm limit in increments of 100 from 3000 to 9000 rpm. Housing is low-profile machined billet aluminum. Advance slope and rpm limit are set with four rotary switches. Even works with engines that have a non-adjustable crankshaft timing sensor; HI-4TC features a switch that sets initial timing. Slope of ignition advance curse is set with second switch. Using these switches in combination lets you set the optimal timing advance for your engine. Module stores the last 30 minutes of engine operation using built-in datalogging (rpm, vehicle speed, manifold pressure, ignition advance and battery voltage). Fully compatible with Harley-Davidson scan tool. Optional PC link cable and Windows-compatible software for custom programming and data analysis; link cable plugs into existing diagnostic connector on the stock wiring harness - Order Part No. 201543. Easy plug-in installation; all adjustment switches are easily accessible from the top of the module.. 83180
2 on Hand
More Info/Options for Crane Cams HI-4TC Ignition Module 201542
|
|
|
|
|
|
|
|
$275.99
Daytona Twin Tec Plug-In Ignition Module 201025
Dennis Kirk Part #: 201025
Daytona Twin Tec Plug-In Ignition Module 201025: Manufacturer part # TC88A - FOR TWIN CAM/SPORTSTER 04-06 CARB MODELS WITH SINGLE 12-PIN CONNECTOR Copy: Include two advance curve families that will work with stock and modified engines. Selectable multi-spark mode gives fast starts and smooth cruising. Come with rotary switches that control mode select, timing adjustments, advance slope and rpm limit (in 100-rpm steps). Coils feature designed-in protection against short circuits. Must be used with OEM coils that have less than 1 ohm primary resistance, and low-resistance spiral- or carbon-core suppression-type plug wires. Order optional USB interface (Part No. 201555) and software to modify the ignition timing (programs available on web site www.daytona-twintec.com/index.html). Use 12V power adapters (Part No. 201529) to power up the modules when removed from the bike (sold separately). Easy-to-follow instructions included. Made in the U.S.A. , , NOTE: Will not work on fuel-injected models. TC88A
1 on Hand
More Info/Options for Daytona Twin Tec Plug-In Ignition Module 201025
|
|
|
|
$275.99
Daytona Twin Tec Plug-In Ignition Module 201025
Dennis Kirk Part #: 201025
Daytona Twin Tec Plug-In Ignition Module 201025: Manufacturer part # TC88A - FOR TWIN CAM/SPORTSTER 04-06 CARB MODELS WITH SINGLE 12-PIN CONNECTOR Copy: Include two advance curve families that will work with stock and modified engines. Selectable multi-spark mode gives fast starts and smooth cruising. Come with rotary switches that control mode select, timing adjustments, advance slope and rpm limit (in 100-rpm steps). Coils feature designed-in protection against short circuits. Must be used with OEM coils that have less than 1 ohm primary resistance, and low-resistance spiral- or carbon-core suppression-type plug wires. Order optional USB interface (Part No. 201555) and software to modify the ignition timing (programs available on web site www.daytona-twintec.com/index.html). Use 12V power adapters (Part No. 201529) to power up the modules when removed from the bike (sold separately). Easy-to-follow instructions included. Made in the U.S.A. , , NOTE: Will not work on fuel-injected models. TC88A
1 on Hand
More Info/Options for Daytona Twin Tec Plug-In Ignition Module 201025
|
|
|
|
|
|
$360.99
Daytona Twin Tec Twin Cam Ignition Kits 201021
Dennis Kirk Part #: 201021
Daytona Twin Tec Twin Cam Ignition Kits 201021: Manufacturer part # 3008 - Daytona Twin Tec LLC has a simple philosophy - do one thing and do it well. Kit for Twin Cam 88 99-03 carb models features an ignition module, spark plug wires and single-fire coil. Module has two advance curve groups with adjustable advance curves to accommodate stock and mod motors. Five rotary switches for timing adjustments, advanced slope and rpm limits. Digital rpm limiter (set in 100-rpm steps). Selectable multi-spark mode for quick starts and smooth running. Coil outputs are protected against short circuits. Optional PC link cable and software available for programming custom curves, programs available at (www.daytona-twintec.com). Instructions included. Made in the U.S.A.. For models listed with two 6-pin ignition module connectors. 3008
1 on Hand
More Info/Options for Daytona Twin Tec Twin Cam Ignition Kits 201021
|
|
|
|
$417.99
Daytona Twin Tec Twin Cam Ignition Kits 201093
Dennis Kirk Part #: 201093
Daytona Twin Tec Twin Cam Ignition Kits 201093: Manufacturer part # 3088 - Includes new 12-pin TC88A ignition module, PC link cable, single-fire coil, and spark plug wires. Module has two advance curve groups with adjustable advance curves to accommodate stock and mod motors. Five rotary switches for timing adjustments, advanced slope and rpm limits. Digital rpm limiter (set in 100-rpm steps). Selectable multi-spark mode for quick starts and smooth running. Coil outputs are protected against short circuits. Instructions included. Made in the U.S.A... 3088
1 on Hand
More Info/Options for Daytona Twin Tec Twin Cam Ignition Kits 201093
|
|
|
|
|
|
|
|
|
|
|
|
$379.99
Dyna Dyna 2000 Single-Fire Ignition and Coil Kits 201073
Dennis Kirk Part #: 201073
Dyna Dyna 2000 Single-Fire Ignition and Coil Kits 201073: Manufacturer part # SFK1P - A complete ignition-system upgrade from Dyna that includes Dyna 2000 ignition module and Dyna Twin Fire coils. Dyna 2000 ignition features include: expanded advance curve functionality, a special retard mode for turbo-charged and nitrous bikes, choice of four advance curves, a quick curve that simulates a mechanical advancer for hot rod engines and four independent rev-limiter choices from 6000 to 7500 rpm. Dyna Twin Fire coils put two performance coils into a single unit only slightly larger than the stock coil; unit mounts easily to the stock mounting bracket; produces spark voltage in excess of 30,000V with fast rise times and high energy. P.C. programmability lets you set a wide open and part throttle curve, dead cranking revs, rev limits and rear cylinder offset. Makes stocking and buying simple by combining parts matched to a specific bike. 7-pin plug. SFK1P
Expected Soon
More Info/Options for Dyna Dyna 2000 Single-Fire Ignition and Coil Kits 201073
|
|
|
|
$379.99
Dyna Dyna 2000 Single-Fire Ignition and Coil Kits 201074
Dennis Kirk Part #: 201074
Dyna Dyna 2000 Single-Fire Ignition and Coil Kits 201074: Manufacturer part # SFK3P - A complete ignition-system upgrade from Dyna that includes Dyna 2000 ignition module and Dyna Twin Fire coils. Dyna 2000 ignition features include: expanded advance curve functionality, a special retard mode for turbo-charged and nitrous bikes, choice of four advance curves, a quick curve that simulates a mechanical advancer for hot rod engines and four independent rev-limiter choices from 6000 to 7500 rpm. Dyna Twin Fire coils put two performance coils into a single unit only slightly larger than the stock coil; unit mounts easily to the stock mounting bracket; produces spark voltage in excess of 30,000V with fast rise times and high energy. P.C. programmability lets you set a wide open and part throttle curve, dead cranking revs, rev limits and rear cylinder offset. Makes stocking and buying simple by combining parts matched to a specific bike. 8-pin plug. SFK3P
1 on Hand
More Info/Options for Dyna Dyna 2000 Single-Fire Ignition and Coil Kits 201074
|
|
|
|
$189.99
Dyna Dyna 2000-HDE Dual-Fire Programmable Digital Ignition Systems-7 pin 201070
Dennis Kirk Part #: 201070
Dyna Dyna 2000-HDE Dual-Fire Programmable Digital Ignition Systems-7 pin 201070: Manufacturer part # DD2000HD2EP - Dynatek is the performance leader for quality electronic products in the motorcycle industry. With the help of top racers and motorcycle builders around the world, Dynatek has worked to create the electronic products necessary to support the modern motorcycle. Upgrade the electronic advance ignition found on late-model Harleys with this plug-in system. Microcomputer-controlled ignitions generate extremely accurate control over the entire ignition process. Tailor the advance curve and rev-limiter to the specific needs of your particular engine. Four built-in advance curves cover the needs of stock to highly modified engines over a variety of operating conditions. Four independent rev-limiter choices from 6000 to 7500 rpm set the exact protection level needed. PART NO. 20-1071 comes with 8-pin connectors as used on 94 and later Harleys; operates in single-fire or dual-fire modes. PART NO. 20-1072 comes with 8-pin connectors as used on 94 and later Harleys; operates in dual-fire mode only. PART NOS. 20-1071 and 20-1072 offer a quick curve, which simulates a mechanical advancer for hot rod motors; option to use vacuum advance compensation via a VOES switch and retard mode, which allows selection of ignition retard of 5 , 7 or 10 upon activation of a retard input. Use PART NO. 20-1070 with a dual-fire ignition only; it simply plugs into your 7-pin stock harness and mounts in the original ignition mounting area. Use PART NO. 20-1069 with a 7-pin connector; it can be used with either one ignition coil firing both cylinders (dual fire), or with two ignition coils, one firing each cylinder (single-fire); no other ignition offers this flexibility. When in single-fire mode, separate tach output wire allows clean tach operation. Diagnostic LED indicator on the back of the control module assists in trouble-shooting and static timing. Not for Twin Cam. NOTE: If your bike doesn't have an ignition harness that can be unplugged from the ignition module, use PART NO. 20-0033 to complete wiring. NOTE: On any electronic advance ignition such as the Dyna 2000-HD1 or the stock Harley ignition, you must use carbon-fiber suppression spark plug wires to reduce radio frequency interference. Using copper wires may cause ignition malfunction due to severe electrical noise generated at the spark plugs. Harley-Davidson OEM wire should be O.K. Suppression wires are also available. DD2000HD2EP
1 on Hand
More Info/Options for Dyna Dyna 2000-HDE Dual-Fire Programmable Digital Ignition Systems-7 pin 201070
|
|
|
|
$190.99
Dyna Dyna 2000-HDE Dual-Fire Programmable Digital Ignition Systems-8 Pin 201072
Dennis Kirk Part #: 201072
Dyna Dyna 2000-HDE Dual-Fire Programmable Digital Ignition Systems-8 Pin 201072: Manufacturer part # DD2000HD2E8P - Dynatek is the performance leader for quality electronic products in the motorcycle industry. With the help of top racers and motorcycle builders around the world, Dynatek has worked to create the electronic products necessary to support the modern motorcycle. Upgrade the electronic advance ignition found on late-model Harleys with this plug-in system. Microcomputer-controlled ignitions generate extremely accurate control over the entire ignition process. Tailor the advance curve and rev-limiter to the specific needs of your particular engine. Four built-in advance curves cover the needs of stock to highly modified engines over a variety of operating conditions. Four independent rev-limiter choices from 6000 to 7500 rpm set the exact protection level needed. Comes with 8-pin connectors as used on 94 and later Harleys; operates in dual-fire mode only. Offers a quick curve, which simulates a mechanical advancer for hot rod motors; option to use vacuum advance compensation via a VOES switch and retard mode, which allows selection of ignition retard of 5°, 7° or 10° upon activation of a retard input. Diagnostic LED indicator on the back of the control module assists in trouble-shooting and static timing. NOTE: If your bike doesn't have an ignition harness that can be unplugged from the ignition module, use PART NO. 20-0033 to complete wiring. NOTE: On any electronic advance ignition such as the Dyna 2000-HD1 or the stock Harley ignition, you must use carbon-fiber suppression spark plug wires to reduce radio frequency interference. Using copper wires may cause ignition malfunction due to severe electrical noise generated at the spark plugs. Harley-Davidson OEM wire should be O.K. Suppression wires are also available. DD2000HD2E8P
1 on Hand
More Info/Options for Dyna Dyna 2000-HDE Dual-Fire Programmable Digital Ignition Systems-8 Pin 201072
|
|
|
|
$237.99
Dyna Dyna 2000-HDE Single/Dual Fire Programmable Digial Ignition Systems-8 Pin 201071
Dennis Kirk Part #: 201071
Dyna Dyna 2000-HDE Single/Dual Fire Programmable Digial Ignition Systems-8 Pin 201071: Manufacturer part # DD2000HD1E8P - Dynatek is the performance leader for quality electronic products in the motorcycle industry. With the help of top racers and motorcycle builders around the world, Dynatek has worked to create the electronic products necessary to support the modern motorcycle. Upgrade the electronic advance ignition found on late-model Harleys with this plug-in system. Microcomputer-controlled ignitions generate extremely accurate control over the entire ignition process. Tailor the advance curve and rev-limiter to the specific needs of your particular engine. Four built-in advance curves cover the needs of stock to highly modified engines over a variety of operating conditions. Four independent rev-limiter choices from 6000 to 7500 rpm set the exact protection level needed. Comes with 8-pin connectors as used on 94 and later Harleys; operates in single-fire or dual-fire modes. Offers a quick curve, which simulates a mechanical advancer for hot rod motors; option to use vacuum advance compensation via a VOES switch and retard mode, which allows selection of ignition retard of 5°, 7° or 10° upon activation of a retard input. When in single-fire mode, separate tach output wire allows clean tach operation. Diagnostic LED indicator on the back of the control module assists in trouble-shooting and static timing. NOTE: If your bike doesn't have an ignition harness that can be unplugged from the ignition module, use PART NO. 20-0033 to complete wiring. NOTE: On any electronic advance ignition such as the Dyna 2000-HD1 or the stock Harley ignition, you must use carbon-fiber suppression spark plug wires to reduce radio frequency interference. Using copper wires may cause ignition malfunction due to severe electrical noise generated at the spark plugs. Harley-Davidson OEM wire should be O.K. Suppression wires are also available. DD2000HD1E8P
2 on Hand
More Info/Options for Dyna Dyna 2000-HDE Single/Dual Fire Programmable Digial Ignition Systems-8 Pin 201071
|
|
|
|
$237.99
Dyna Dyna 2000-HDE Single/Dual Fire Programmable Digial Ignition Systems-8 Pin 201071
Dennis Kirk Part #: 201071
Dyna Dyna 2000-HDE Single/Dual Fire Programmable Digial Ignition Systems-8 Pin 201071: Manufacturer part # DD2000HD1E8P - Dynatek is the performance leader for quality electronic products in the motorcycle industry. With the help of top racers and motorcycle builders around the world, Dynatek has worked to create the electronic products necessary to support the modern motorcycle. Upgrade the electronic advance ignition found on late-model Harleys with this plug-in system. Microcomputer-controlled ignitions generate extremely accurate control over the entire ignition process. Tailor the advance curve and rev-limiter to the specific needs of your particular engine. Four built-in advance curves cover the needs of stock to highly modified engines over a variety of operating conditions. Four independent rev-limiter choices from 6000 to 7500 rpm set the exact protection level needed. Comes with 8-pin connectors as used on 94 and later Harleys; operates in single-fire or dual-fire modes. Offers a quick curve, which simulates a mechanical advancer for hot rod motors; option to use vacuum advance compensation via a VOES switch and retard mode, which allows selection of ignition retard of 5°, 7° or 10° upon activation of a retard input. When in single-fire mode, separate tach output wire allows clean tach operation. Diagnostic LED indicator on the back of the control module assists in trouble-shooting and static timing. NOTE: If your bike doesn't have an ignition harness that can be unplugged from the ignition module, use PART NO. 20-0033 to complete wiring. NOTE: On any electronic advance ignition such as the Dyna 2000-HD1 or the stock Harley ignition, you must use carbon-fiber suppression spark plug wires to reduce radio frequency interference. Using copper wires may cause ignition malfunction due to severe electrical noise generated at the spark plugs. Harley-Davidson OEM wire should be O.K. Suppression wires are also available. DD2000HD1E8P
2 on Hand
More Info/Options for Dyna Dyna 2000-HDE Single/Dual Fire Programmable Digial Ignition Systems-8 Pin 201071
|
|
|
|
$237.99
Dyna Dyna 2000-HDE Single/Dual Fire Programmable Digital Ignition System-7 pin 201069
Dennis Kirk Part #: 201069
Dyna Dyna 2000-HDE Single/Dual Fire Programmable Digital Ignition System-7 pin 201069: Manufacturer part # DD2000HD1EP - Dynatek is the performance leader for quality electronic products in the motorcycle industry. With the help of top racers and motorcycle builders around the world, Dynatek has worked to create the electronic products necessary to support the modern motorcycle. Upgrade the electronic advance ignition found on late-model Harley's with this plug-in system. Microcomputer-controlled ignitions generate extremely accurate control over the entire ignition process. Tailor the advance curve and rev-limiter to the specific needs of your particular engine. Four built-in advance curves cover the needs of stock to highly modified engines over a variety of operating conditions. Four independent rev-limiter choices from 6000 to 7500 rpm set the exact protection level needed. Comes with a 7-pin connector; it can be used with either one ignition coil firing both cylinders (dual fire), or with two ignition coils, one firing each cylinder (single-fire); no other ignition offers this flexibility. When in single-fire mode, separate tach output wire allows clean tach operation. Diagnostic LED indicator on the back of the control module assists in trouble-shooting and static timing. NOTE: If your bike doesn't have an ignition harness that can be unplugged from the ignition module, use PART NO. 20-0033 to complete wiring. NOTE: On any electronic advance ignition such as the Dyna 2000-HD1 or the stock Harley ignition, you must use carbon-fiber suppression spark plug wires to reduce radio frequency interference. Using copper wires may cause ignition malfunction due to severe electrical noise generated at the spark plugs. Harley-Davidson OEM wire should be O.K. Suppression wires are also available. DD2000HD1EP
2 on Hand
More Info/Options for Dyna Dyna 2000-HDE Single/Dual Fire Programmable Digital Ignition System-7 pin 201069
|
|
|
|
$237.99
Dyna Dyna 2000I Electronic Ignition 201009
Dennis Kirk Part #: 201009
Dyna Dyna 2000I Electronic Ignition 201009: Manufacturer part # D2KI1P - Dynatek is the performance leader for quality electronic products in the motorcycle industry. With the help of top racers and motorcycle builders around the world, Dynatek has worked to create the electronic products necessary to support the modern motorcycle. This hassle-free performance ignition fits in the nose cone . Entire unit hides under the cam cover for a clean look . Single-fire operation down to 0 rpm for easier cranking and kicking . Works in all combinations of single-fire or dual-fire with single-plug or dual-plug heads . Ten advance curves cover a broad range of engines and riding styles . Engine over-rev protection . Adjustable timing retard for nitrous and turbo applications . VOES indicator lets you monitor VOES switch . Built-in tach driver can activate shift lights, auto-shifters and other accessories . Built-in timing indicator allows easy static timing . Over-current and short-circuit protection . Active dwell control . Voltage-spike protection . For carbureted models 70-99; 82 and earlier models will require a sensor cup addition, OEM NO. 32402-83 (not for Twin Cam 88) . Not for kick-start-only models . Programming and downloading data and graphs requires programming kit PART NO. 20-0864 (includes CD, cables and instructions), NOTE: Programming kit is not necessary for use of all selectable functions of the current ignition. .. D2KI1P
4 on Hand
More Info/Options for Dyna Dyna 2000I Electronic Ignition 201009
|
|
