Snowmobile - Shop, Tools & Trailer - Dollies, Lifts, Ramps & Stands

$229.95 Bay City Supply Heavy-Duty Shop Dolly 710-205
Manufacturer: Bay City Supply
Dennis Kirk Part #: 282930
Bay City Supply Heavy-Duty Shop Dolly: Manufacturer part # 710-205 - Shop dolly is an invaluable tool for moving all sleds on dry land with ease. New anti-slip pad system for sure grip that wont mar or scratch. Ball bearing wheels provide unmatched mobility for both heavy and light loads. Adjustable legs lift machines with independent or leaf spring suspension. Black enamel finish. Assembly required. Shipped via U.P.S.. Fits machines 33 inches to 48 inches wide. Made in the USA. 710-205
More than 10 on hand

More Info/Options for Bay City Supply Heavy-Duty Shop Dolly 710-205

Snowmobile - Shop, Tools & Trailer - Dollies, Lifts, Ramps & Stands

$37.99 Caliber Grip Glides For Ramps 13352
Manufacturer: Caliber
Dennis Kirk Part #: 516039
Caliber Grip Glides For Ramps: Manufacturer part # 13352 - Now you can add Grip Glides to open-frame ramps used on flatbed trailers. Sold in a set of 16 pieces, enough for one side of a ramp; two sets will complete both sides. , , Included Items: , (16) Ramp Grip Glides (each accepts up to 3 screws), (33) Stainless Sheet Metal Screws 1 in. long, (1) Instruction Sheet, , Length: 8 1/2 in., Width: 3 in., Tread Depth: 1/2 in., Installed Height: 3/4 in., Fits 1 in. square tubes, , Note: Please note a 11/64 in. drill bit and drill are required to install these onto aluminum or steel bars (bit not included). 13352
10 on hand

More Info/Options for Caliber Grip Glides For Ramps 13352

Snowmobile - Shop, Tools & Trailer - Dollies, Lifts, Ramps & Stands

$369.99 CMP Lift Stand 91007836
Manufacturer: CMP
Dennis Kirk Part #: 28556
CMP Lift Stand: Manufacturer part # 91007836 - Set up a work station like the pros use-right in your own garage!. Lifts machine up to 24 in. off the floor to gain a better working position. Folds down to 5 in. for storage. 2000 lbs. lift/hold capacity. Cranks up with supplied crank or use an electric drill. Optional wheel kit allows easy movement of lift stand on any flat, smooth surface Order Part No. 28666 , This item only ships via UPS.. 91007836
10 on hand

More Info/Options for CMP Lift Stand 91007836

Snowmobile - Shop, Tools & Trailer - Dollies, Lifts, Ramps & Stands

$80.99 CMP Lift Stand Wheel Kit 91007834
Manufacturer: CMP
Dennis Kirk Part #: 28666
CMP Lift Stand Wheel Kit: Manufacturer part # 91007834 - Allow easy movement of lift stand on any flat, smooth surface. 270 lbs capacity per wheel (1080 lbs total).. 91007834
Expected Soon

More Info/Options for CMP Lift Stand Wheel Kit 91007834

Snowmobile - Shop, Tools & Trailer - Dollies, Lifts, Ramps & Stands

$379.99 CMP Pro Shop Dolly - Standard 81000240
Manufacturer: CMP
Dennis Kirk Part #: 28771
CMP Pro Shop Dolly - Standard: Manufacturer part # 81000240 - Large 5" x 8" turf tires for increased flotation and lift. Dual 8" wide lift pads accommodate all snowmobiles. Increased lifting height. Quick-adjust push-button lift strap. Bright red powder-coat finish. , NOTE: Can only be shipped UPS .. 81000240
5 on hand

More Info/Options for CMP Pro Shop Dolly - Standard 81000240

Snowmobile - Shop, Tools & Trailer - Dollies, Lifts, Ramps & Stands

$379.99 CMP Pro Shop Dolly-2 Up 81000242
Manufacturer: CMP
Dennis Kirk Part #: 28927
CMP Pro Shop Dolly-2 Up: Manufacturer part # 81000242 - Dual wide lift pads accommodate all snowmobiles. Increased lifting height. Quick-adjust push-button lift strap. Bright red powder-coat finish. , Note: This item ships UPS only.. 81000242
5 on hand

More Info/Options for CMP Pro Shop Dolly-2 Up 81000242

Snowmobile - Shop, Tools & Trailer - Dollies, Lifts, Ramps & Stands

$237.99 CMP Pro-Series Lift Hoist 91005438
Manufacturer: CMP
Dennis Kirk Part #: 28557
CMP Pro-Series Lift Hoist: Manufacturer part # 91005438 - An easy way to lift snowmobiles or anything else. Use it for suspension and track adjustments. Five-foot lift height. Heavy-duty construction. Canadian customers: This item ships UPS only.. 91005438
1 on hand

More Info/Options for CMP Pro-Series Lift Hoist 91005438

Snowmobile - Shop, Tools & Trailer - Dollies, Lifts, Ramps & Stands

$81.99 CMP Pro-Series Snowmobile Stand 23 1/2 in. High 81501050
Manufacturer: CMP
Dennis Kirk Part #: 28342
CMP Pro-Series Snowmobile Stand 23 1/2 in. High: Manufacturer part # 81501050 - Stands are fabricated of heavy-gauge steel. Full shield blocks debris during warmups. One-piece construction with no hinges or chains. Use for service or storage. , , NOTES:, , Can only be shipped UPS , Long travel suspensions are generally those over 7 in.; if unsure of your suspension order 28-687 intead, or measure the height of your bumper as the back is raised to see how high is must be to pull the track off the ground. 81501050
Expected Soon

More Info/Options for CMP Pro-Series Snowmobile Stand 23 1/2 in. High 81501050

Snowmobile - Shop, Tools & Trailer - Dollies, Lifts, Ramps & Stands

$57.99 CMP Replacement Wheel and Tire for Shop Dolly 81005011
Manufacturer: CMP
Dennis Kirk Part #: 5531
CMP Replacement Wheel and Tire for Shop Dolly: Manufacturer part # 81005011 - This is a replacement tire and wheel only. Pads adjust to fit machines 33" to 48" wide. Requires assembly.. 81005011
2 on hand

More Info/Options for CMP Replacement Wheel and Tire for Shop Dolly 81005011

Snowmobile - Shop, Tools & Trailer - Dollies, Lifts, Ramps & Stands

$284.99 CMP Shop Dolly 81000228
Manufacturer: CMP
Dennis Kirk Part #: 28517
CMP Shop Dolly: Manufacturer part # 81000228 - Move your snowmobile without breaking your back. Pads adjust to fit machines 33 in. to 48 in. wide. U-shape handle gives excellent clearance and is adjustable so you can get more leverage for easier lifting. Rubber lift pads wont scratch machine. Comes with 1 in. x 46 in. nylon lift strap Requires assembly. , Note: Ship via UPS Only .. 81000228
Expected Soon

More Info/Options for CMP Shop Dolly 81000228

Snowmobile - Shop, Tools & Trailer - Dollies, Lifts, Ramps & Stands

$97.99 CMP Snowmobile Lever Lift Stand 91007226
Manufacturer: CMP
Dennis Kirk Part #: 28688
CMP Snowmobile Lever Lift Stand: Manufacturer part # 91007226 - Lifts sled 7" and adjusts from 14" to 23 3/4". Lever-operated, safety locking pin assures secure operation. 19 1/2" wide. Weighs 14 lbs... 91007226
2 on hand

More Info/Options for CMP Snowmobile Lever Lift Stand 91007226

Snowmobile - Shop, Tools & Trailer - Dollies, Lifts, Ramps & Stands

$43.99 E-Z Traxx Arrowhead Dolly Set 1058
Manufacturer: E-Z Traxx
Dennis Kirk Part #: 28766
E-Z Traxx Arrowhead Dolly Set: Manufacturer part # 1058 - Make moving your snowmobile easy. Made of high-impact nylon construction. Four 2 in. wheels on each dolly for improved stability. Rubber pads for improved grip. 360 degree turning capacity.. 1058
More than 10 on hand

More Info/Options for E-Z Traxx Arrowhead Dolly Set 1058

Snowmobile - Shop, Tools & Trailer - Dollies, Lifts, Ramps & Stands

$94.99 E-Z Traxx E-Z Roller Dolly Set 1053
Manufacturer: E-Z Traxx
Dennis Kirk Part #: 282553
E-Z Traxx E-Z Roller Dolly Set: Manufacturer part # 1053 - Travel over gravel, cracks and bumps with this high-quality, solid steel dolly set. Extra-long and stable 3" rubber and nylon castors allow for easy movement and 360 turning radius. Protects and fits all sizes of skis, including skis with dual carbides, with a rubberized ventor groove. Prevent unwanted movement with adjustable tie-down straps.. 1053
More than 10 on hand

More Info/Options for E-Z Traxx E-Z Roller Dolly Set 1053

Snowmobile - Shop, Tools & Trailer - Dollies, Lifts, Ramps & Stands

$43.99 E-Z Traxx Sled Stand 1070
Manufacturer: E-Z Traxx
Dennis Kirk Part #: 28449
E-Z Traxx Sled Stand: Manufacturer part # 1070 - The simple method for keeping snowmobiles elevated and preventing tracks from freezing to the ground. Removes load from rear suspension during storage. Adjustable stand height fits most snowmobiles. Easy installation -- slide stand under rear lift bar, place hands under channel and lift; stand falls into place. Adjusts to either 22" or 28" tall.. 1070
1 on hand

More Info/Options for E-Z Traxx Sled Stand 1070

Snowmobile - Shop, Tools & Trailer - Dollies, Lifts, Ramps & Stands

$40.99 E-Z Traxx Snowmobile Dolly System 1055
Manufacturer: E-Z Traxx
Dennis Kirk Part #: 28450
E-Z Traxx Snowmobile Dolly System: Manufacturer part # 1055 - One high-impact nylon track dolly and two steel ski dollies mean efficient, no-hassle sled moving. Nonskid coating keeps skis from slipping. Easy to use on all hard surfaces. Assembly required. 3" wheels on ski dollies; 2" wheels on track dolly. 1055
More than 10 on hand

More Info/Options for E-Z Traxx Snowmobile Dolly System 1055

Snowmobile - Shop, Tools & Trailer - Dollies, Lifts, Ramps & Stands

$106.99 E-Z Traxx Snowmobile Lift 1095
Manufacturer: E-Z Traxx
Dennis Kirk Part #: 28485
E-Z Traxx Snowmobile Lift: Manufacturer part # 1095 - Made of durable steel. Features detachable front base. Lifts front or rear of sled for ski and track maintenance. Raises higher than most other lifts. No mast adjustments required. Hooks adjust instantly to any height. 12" maximum lift distance. 300 lb. capacity. Two plastic plugs and latch pin listed in the instructions are not included. 1095
Expected Soon

More Info/Options for E-Z Traxx Snowmobile Lift 1095

Snowmobile - Shop, Tools & Trailer - Dollies, Lifts, Ramps & Stands

$108.99 Fulton Snowmobile Lift Jack SBL100
Manufacturer: Fulton
Dennis Kirk Part #: 282367
Fulton Snowmobile Lift Jack: Manufacturer part # SBL100 - Smooth and easy-to-operate (five turns per one inch of travel), this is the industry's fastest mechanical screw jack. With 19 in. of travel, ground clearance for even long two-up touring sleds is readily available. Designed for 31 in. maximum lift height; 800 lb. capacity. Heavy-duty lip with vinyl coating for great support with no scratching of the bumper. Locking plate deters theft; brass hitch lock (PART NO. 40-6798) must be purchased separately. Compact, top wind design takes less space in operation or storage. Big 9.7 in. x 10 in. zinc-plated base for stability when a machine is jacked up. Pre-drilled base accepts track studs to keep it from sliding in icy conditions. Black powder-painted outer tube comes with a lift bracket attached.. SBL100
More than 10 on hand

More Info/Options for Fulton Snowmobile Lift Jack SBL100

Snowmobile - Shop, Tools & Trailer - Dollies, Lifts, Ramps & Stands

$41.95 Parts Unlimited 27 in. Tri-Snow Stand 22100009
Manufacturer: Parts Unlimited
Dennis Kirk Part #: 282118
Parts Unlimited 27 in. Tri-Snow Stand: Manufacturer part # 22100009 - Secure triangular style snowmobile stand. Rubber coating to resist scratching and rusting. 27" tall with a 14" base.. 22100009
More than 10 on hand

More Info/Options for Parts Unlimited 27 in. Tri-Snow Stand 22100009

Snowmobile - Shop, Tools & Trailer - Dollies, Lifts, Ramps & Stands

$4.95 Parts Unlimited Replacement Wheel for Sled Dolly 22100008
Manufacturer: Parts Unlimited
Dennis Kirk Part #: 281742
Parts Unlimited Replacement Wheel for Sled Dolly: Manufacturer part # 22100008 - Replacement Wheel for Part Unlimited Sled Dolly Part No. 281940. Sold each. 22100008
More than 10 on hand

More Info/Options for Parts Unlimited Replacement Wheel for Sled Dolly 22100008

Snowmobile - Shop, Tools & Trailer - Dollies, Lifts, Ramps & Stands

$64.95 Parts Unlimited Sled Dolly Set 22100007
Manufacturer: Parts Unlimited
Dennis Kirk Part #: 281940
Parts Unlimited Sled Dolly Set: Manufacturer part # 22100007 - Constructed of heavy-duty steel and coated with blackpowder paint. Designed to be used with single- and double-runner skis. Features 2 1/2" hard rubber swivel casters. Each ski plate features four wheels, while the track plate has three wheels for ease of movement. Kit contains two ski plates and one track plate. 22100007
More than 10 on hand

More Info/Options for Parts Unlimited Sled Dolly Set 22100007

Snowmobile - Shop, Tools & Trailer - Dollies, Lifts, Ramps & Stands

Snowmobile - Shop, Tools & Trailer - Dollies, Lifts, Ramps & Stands