|
|
$789.99
Independent Gas Tank Company 4 in Stretch Bobber Tank w/ Square End and Screw-in Cap 182577
Dennis Kirk Part #: 182577
Independent Gas Tank Company 4 in Stretch Bobber Tank w/ Square End and Screw-in Cap 182577: Manufacturer part # BOBBER - Handcrafted tanks are quality constructed using 16-gauge cold-rolled steel. Each tank has been TIG welded, then pressure tested to the highest standards. Four mounts on the tank bottom and feature a tunnel width of 2 1/2". Other features include: 22mm petcock fitting, 1/8" NPT threaded crossover fittings and screw-in cap bung. Custom mounting required; will not fit frames with standard Fat Bob tank mounts. Made in the U.S.A. Tank Syle - Bobber: square 2 1/4" end, , NOTE: The use of a custom seat is required, , NOTE: Tanks with screw bungs use 82-E96 style caps (sold separately), , NOTE: This item is shipped 3-4 days after the order is placed, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. BOBBER
1 on Hand
More Info/Options for Independent Gas Tank Company 4 in Stretch Bobber Tank w/ Square End and Screw-in Cap 182577
|
|
|
|
$789.99
H18844 Independent Gas Tank Company 2 in. Stretch Tank
Dennis Kirk Part #: H18844
H18844 Independent Gas Tank Company 2 in. Stretch Tank: Manufacturer part # 19140132 - 2.5 gallon tank. Tank is 22 in. L x 11 in. W. Handcrafted tank is quality constructed using 16-gauge cold-rolled steel. Each tank has been TIG welded, then pressure tested to the highest standards. Has four mounts on the tank bottom and a tunnel width of 2 1/4 in.. Other features include: 22mm petcock fitting, threaded crossover fittings and screw-style bung or HotMatch pop-up flush cap. Custom mounting required; will not fit frames with standard Fat Bob tank mounts. Made in the U.S.A.. , Tank Style-Straight-Up: Point end; use screw-in cap, , NOTE: The use of a custom seat is required, , NOTE: Tanks with screw bungs use 82-E96 style caps, , NOTE: This item ships 3-4 days after order is placed, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 19140132
1 on Hand
More Info/Options for H18844 Independent Gas Tank Company 2 in. Stretch Tank
|
|
|
|
$789.99
H18836 Independent Gas Tank Company Stretch Tanks
Dennis Kirk Part #: H18836
H18836 Independent Gas Tank Company Stretch Tanks: Manufacturer part # 19140130 - Handcrafted tank is quality constructed using 16-gauge cold-rolled steel. Each tank has been TIG welded, then pressure tested to the highest standards. Has four mounts on the tank bottom and a tunnel width of 2 1/4 in.. 22mm petcock fitting. 1/8" NPT threaded crossover fittings. Require custom mounting; will not work on frames with standard Fat Bob tank mounts. Made in the U.S.A., , TANK STYLE - Aero. Pointed at the rear. Notched for seat tube clearance. Capacity is approximately 4 gal.. 22" L X 13" W. Matt Hotch pop-up cap, , NOTE: Not for use on fuel-injected models, , NOTE: The use of a custom seat is required, , NOTE: This item ships 3-4 days after order is placed, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 19140130
1 on Hand
More Info/Options for H18836 Independent Gas Tank Company Stretch Tanks
|
|
|
|
$789.99
H18856 Independent Gas Tank Company Stretch Tanks
Dennis Kirk Part #: H18856
H18856 Independent Gas Tank Company Stretch Tanks: Manufacturer part # DS391717 - Handcrafted tank is quality constructed using 16-gauge cold-rolled steel. Each tank has been TIG welded, then pressure tested to the highest standards. Has four mounts on the tank bottom and a tunnel width of 2 1/4 in.. 22mm petcock fitting. 1/8" NPT threaded crossover fittings. Require custom mounting; will not work on frames with standard Fat Bob tank mounts. Made in the U.S.A., , TANK STYLE - Aero. Pointed at the rear Notched for seat tube clearance. Capacity is approximately 5 gal.. 25" L X 14" W. Screw-in cap bung, , NOTE: Not for use on fuel-injected models, , NOTE: The use of a custom seat is required, , NOTE: Tanks with screw-in caps use 82-E96 style caps (sold separately), , NOTE: This item ships 3-4 days after order is placed, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. DS391717
1 on Hand
More Info/Options for H18856 Independent Gas Tank Company Stretch Tanks
|
|
|
|
$789.99
H18825 Independent Gas Tank Company Stretch Tanks
Dennis Kirk Part #: H18825
H18825 Independent Gas Tank Company Stretch Tanks: Manufacturer part # 07010002 - Handcrafted tank is quality constructed using 16-gauge cold-rolled steel. Each tank has been TIG welded, then pressure tested to the highest standards. Has four mounts on the tank bottom and a tunnel width of 2 1/4 in.. 22mm petcock fitting. 1/8" NPT threaded crossover fittings. Require custom mounting; will not work on frames with standard Fat Bob tank mounts. Made in the U.S.A., , TANK STYLE - Streamline. Pointed at the rear with sqaure end. Notched for seat tube clearance. Capacity is approximately 4.5 gal.. 27" L X 11" W. Screw-in cap Bung. Work well with arched backbone frames, , NOTE: Not for use on fuel-injected models, , NOTE: The use of a custom seat is required, , NOTE: Tanks with screw-in caps use 82-E96 style caps (sold separately), , NOTE: This item ships 3-4 days after order is placed, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 07010002
1 on Hand
More Info/Options for H18825 Independent Gas Tank Company Stretch Tanks
|
|
|
|
$789.99
H18828 Independent Gas Tank Company Stretch Tanks
Dennis Kirk Part #: H18828
H18828 Independent Gas Tank Company Stretch Tanks: Manufacturer part # 07010004 - Handcrafted tank is quality constructed using 16-gauge cold-rolled steel. Each tank has been TIG welded, then pressure tested to the highest standards. Has four mounts on the tank bottom and a tunnel width of 2 1/4 in.. 22mm petcock fitting. 1/8" NPT threaded crossover fittings. Require custom mounting; will not work on frames with standard Fat Bob tank mounts. Made in the U.S.A., , TANK STYLE - Chopper. Square end and rounded sides. Capacity is approximately 4.5 gal.. 27" L X 11" W. Screw-in cap bung, , NOTE: Not for use on fuel-injected models, , NOTE: The use of a custom seat is required, , NOTE: Tanks with screw-in caps use 82-E96 style caps (sold separately), , NOTE: This item ships 3-4 days after order is placed, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 07010004
1 on Hand
More Info/Options for H18828 Independent Gas Tank Company Stretch Tanks
|
|
|
|
$789.99
H18832 Independent Gas Tank Company Stretch Tanks
Dennis Kirk Part #: H18832
H18832 Independent Gas Tank Company Stretch Tanks: Manufacturer part # CS2 - Handcrafted tank is quality constructed using 16-gauge cold-rolled steel. Each tank has been TIG welded, then pressure tested to the highest standards. Has four mounts on the tank bottom and a tunnel width of 2 1/4 in.. 22mm petcock fitting. 1/8" NPT threaded crossover fittings. Require custom mounting; will not work on frames with standard Fat Bob tank mounts. Made in the U.S.A., , TANK STYLE - Chopper. 11" wide with square end. Capacity is approximately 3.7 gal.. 25" L X 11" W. Screw-in cap Bung, , NOTE: Not for use on fuel-injected models, , NOTE: The use of a custom seat is required, , NOTE: Tanks with screw-in caps use 82-E96 style caps (sold separately), , NOTE: This item ships 3-4 days after order is placed, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. CS2
1 on Hand
More Info/Options for H18832 Independent Gas Tank Company Stretch Tanks
|
|
|
|
$789.99
H18830 Independent Gas Tank Company Stretch Tanks
Dennis Kirk Part #: H18830
H18830 Independent Gas Tank Company Stretch Tanks: Manufacturer part # 07010006 - Handcrafted tank is quality constructed using 16-gauge cold-rolled steel. Each tank has been TIG welded, then pressure tested to the highest standards. Has four mounts on the tank bottom and a tunnel width of 2 1/4 in.. 22mm petcock fitting. 1/8" NPT threaded crossover fittings. Require custom mounting; will not work on frames with standard Fat Bob tank mounts. Made in the U.S.A., , TANK STYLE - Chopper. 11" wide with square end and rounded sides. Capacity is approximately 3.7 gal.. 25" L X 11" W. Screw-in cap Bung, , NOTE: Not for use on fuel-injected models, , NOTE: The use of a custom seat is required, , NOTE: Tanks with screw-in caps use 82-E96 style caps (sold separately), , NOTE: This item ships 3-4 days after order is placed, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 07010006
1 on Hand
More Info/Options for H18830 Independent Gas Tank Company Stretch Tanks
|
|
|
|
$788.99
Akrapovic Street Legal Line Oval Slip-On Muffler With Carbon Fiber Muffler Sleeve 4400400
Dennis Kirk Part #: 4400400
Akrapovic Street Legal Line Oval Slip-On Muffler With Carbon Fiber Muffler Sleeve 4400400: Manufacturer part # SH10SO3THTC - State-of-the-art designs and materials provide low weight, legal sound levels and high performance along with the recognizable Akrapovic sound. Satisfy all conditions for exhaust system noise levels and safety; conform to the strict EU regulations for street use. Improves the performance of your engine. Highest quality materials and workmanship. Weight savings over stock system, , . This is a general picture of this exhaust the actual product may vary for your motorcycle . Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SH10SO3THTC
1 on Hand
More Info/Options for Akrapovic Street Legal Line Oval Slip-On Muffler With Carbon Fiber Muffler Sleeve 4400400
|
|
|
|
$788.99
Akrapovic Street Legal Line Oval Slip-On Muffler With Titanium Muffler Sleeve 4400401
Dennis Kirk Part #: 4400401
Akrapovic Street Legal Line Oval Slip-On Muffler With Titanium Muffler Sleeve 4400401: Manufacturer part # SH10SO3THTT - State-of-the-art designs and materials provide low weight, legal sound levels and high performance along with the recognizable Akrapovic sound. Satisfy all conditions for exhaust system noise levels and safety; conform to the strict EU regulations for street use. Improves the performance of your engine. Highest quality materials and workmanship. Weight savings over stock system, , CAUTION: Akrapovic recommends you do not use any acidic cleaning solution (wheel cleaners, etc.) on this product. The use of these chemicals may lead to failure of the front rosette(s) , ,. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with any questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or Power Commander is recommended please see the Chems/Lubes section or perform a search using your make, model and year for products available, ,. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SH10SO3THTT
1 on Hand
More Info/Options for Akrapovic Street Legal Line Oval Slip-On Muffler With Titanium Muffler Sleeve 4400401
|
|
|
|
$788.99
Pro-One Smooth Chrome Billet Outer Primary Cover 148994
Dennis Kirk Part #: 148994
Pro-One Smooth Chrome Billet Outer Primary Cover 148994: Manufacturer part # 200460 - Machined from solid billet aluminum, each cover is fully polished to a mirror finish and then chromed plated. Matching derby cover and inspection covers are available separately. , , Included items 1. (1) Billet outer primary cover. 2. (1) Large Diameter (gray) bushing. 3. (1) Brass starter pinion bushing. 4. (1) 3/8-16 Thin pattern nylock. 5. (1) 3/8-16 X 3/4" Carriage bolt. This item ships in 3-4 business day after the order is placed.. 200460
1 on Hand
More Info/Options for Pro-One Smooth Chrome Billet Outer Primary Cover 148994
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
