TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Categories

• Helmets & Eyewear
• Apparel
• Exhaust
• Tires & Wheels
• Body & Windshield
• Rider & Machine Accessories
• Engine & Intake
• Drivetrain, Brakes & Suspension
• Controls & Handling
• Electrical & Lighting
• Chems, Lubes, Shop, Tools & Trailer

Catalogs

• Off Road
• Harley-Davidson
• Snowmobile
• Metric Bikes
• Watercraft

Trac Dynamics Extended 240 Big Wheel Swingarm p588277

$2179.99 Trac Dynamics Extended 240 Big Wheel Swingarm p588277 $2179.99 Manufacturer: Trac Dynamics Dennis Kirk Part #: 583169 Trac Dynamics Extended 240 Big Wheel Swingarm: Manufacturer part # p588277 - Get that "fat tire" look with a Performance Machine 8.5" x 18" rear wheel one of these kits, available in chrome or black powdercoat. Designed with 10" extended wheelbase. Kits include 1/4" offset 17-tooth front sprocket; feature the S/T axle adjuster, loop support, internal air tank and axle spacers. 1/8" NPT air tank fittings come with plugs in them. Swingarms for Kawasaki ZX10R and Yamaha R1 include brake caliper, hanger bracket and rotor components needed for bolt-on installation. Installation require the use of an extended rear brake line (sold separately. For correct wheel, see performance machine forged aluminum street wheels, super wide rear. , , NOTE: Air tank is for use with nitrogen/air shifters. NOT FOR USE WITH NITROUS OXIDE., NOTE: Maximum pressure for air tanks is 160 lb., NOTE: Extended brake lines and 130-link or longer chain required; sold separately. NOTE: This item ships 3-4 business days after order is placed. p588277 1 on hand More Info/Options for Trac Dynamics Extended 240 Big Wheel Swingarm p588277

$2179.99 Trac Dynamics Extended 240 Big Wheel Swingarm p588277 583167 $2179.99 Manufacturer: Trac Dynamics Dennis Kirk Part #: 583167 Trac Dynamics Extended 240 Big Wheel Swingarm: Manufacturer part # p588277 - DennisKirk Part # 583167 - Get that "fat tire" look with a Performance Machine 8.5" x 18" rear wheel one of these kits, available in chrome or black powdercoat. Designed with a 6" or 10" extended wheelbase. Kits include 1/4" offset 17-tooth front sprocket; feature the S/T axle adjuster, loop support, internal air tank and axle spacers. 1/8" NPT air tank fittings come with plugs in them. Swingarms for Kawasaki ZX10R and Yamaha R1 include brake caliper, hanger bracket and rotor components needed for bolt-on installation. Installation require the use of an extended rear brake line (sold separately. For correct wheel, see performance machine forged aluminum street wheels, super wide rear. , , NOTE: Air tank is for use with nitrogen/air shifters. NOT FOR USE WITH NITROUS OXIDE., NOTE: Maximum pressure for air tanks is 160 lb., NOTE: Extended brake lines and 130-link or longer chain required; sold separately. NOTE: This item ships 3-4 business days after order is placed. p588277 1 on hand More Info/Options for Trac Dynamics Extended 240 Big Wheel Swingarm p588277 583167

$2165.99 Jims 5-Speed Transmission Assembly 8000DS $2165.99 Manufacturer: JIMS Dennis Kirk Part #: H14122 Jims 5-Speed Transmission Assembly: Manufacturer part # 8000DS - Better than OEM. Gears and shafts are CNC-machined from materials exceeding 8620 steel specifications. Components put together by hand; shafts matched to within .0002 in. tolerance. Assemblies include chrome trap door, side cover, top cover and hardware. Available with standard ratio 3.21:1 first-gear sets. All parts are made in the U.S.A. and assembled in JIMS technologically advanced assembly room. Includes Manufacturers Statement of Origin (MSO), , NOTE: Does not include a front pulley, NOTE: This item ships in 3-4 business day after the order is placed.. 8000DS 1 on hand More Info/Options for Jims 5-Speed Transmission Assembly 8000DS

$2107.99 JIMS 6-Speed Overdrive Super Kit p110300 $2107.99 Manufacturer: JIMS Dennis Kirk Part #: 110300 JIMS 6-Speed Overdrive Super Kit: Manufacturer part # p110300 - Designed to turn stock 5-speed transmissions into a 6-speed. Reduces vibration that creates wear. Creates a more relaxing cruising speed. All gear sets use 2.94:1 close-ratio 1st gear that widens bike's speed range in 1st gear and lessens the rpm drop when shifting into second. Overdrive 6th gear (.86:1 ratio) lowers engine rpm by almost 475 at 75 mph. Made in the U.S.A, , NOTE: Requires speedometer sensor block-off plate kit (#27-1280); if speedometer is not driven from transmission, then two block-off plates kits are required., , NOTE: Requires speedometer be recalibrated., , NOTE: Trap door extends 3/8" farther to right than stock part. Alteration to some parts that attach to or around the trap door may be required.. p110300 1 on hand More Info/Options for JIMS 6-Speed Overdrive Super Kit p110300

$2089.99 Lonestar Racing +3 in. MTS Suspension Kit p554856 $2089.99 Manufacturer: Lonestar Racing Dennis Kirk Part #: 554856 Lonestar Racing +3 in. MTS Suspension Kit: Manufacturer part # p554856 - Delivers tight cornering ability and increased stability. A-arms are constructed of 4130 chromoly tubing and TIG-welded using laser cut 4130 tabs; 3 in. extension with 1 in. backward placement. Kit includes A-arms, tie rod extenders, Delrin steering stops, upper ball joints, greasable delrin pivot points and extended axle shafts. Uses stock length shocks; can achieve up to 10 in. of travel with aftermarket shocks; it is recommended that your shocks be sprung and valved specifically to this kit for optimal performance. Available in natural (unfinished) or with powdercoat finish. Will also fit YXR 660 Rhino 4x4 04 if aftermarket heavy-duty axles are used.. p554856 1 on hand More Info/Options for Lonestar Racing +3 in. MTS Suspension Kit p554856

$2089.99 KR Tuned Carbon Fiber Full Exhaust System 804062300 $2089.99 Manufacturer: KR Tuned Dennis Kirk Part #: 4401826 KR Tuned Carbon Fiber Full Exhaust System: Manufacturer part # 804062300 - Designed by the Kenny Roberts MotoGP race engineers. Extreme-performance exhaust offers maximum flow and the best possible lean angles. Headers are constructed of lightweight stainless steel with TIG welds for durability. Special canister shape is designed to hug your bike to maximize lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 804062300 1 on hand More Info/Options for KR Tuned Carbon Fiber Full Exhaust System 804062300

$2089.99 KR Tuned Titanium Full Exhaust System 804062399 $2089.99 Manufacturer: KR Tuned Dennis Kirk Part #: 4401825 KR Tuned Titanium Full Exhaust System: Manufacturer part # 804062399 - Designed by the Kenny Roberts MotoGP race engineers. Extreme-performance exhaust offers maximum flow and the best possible lean angles. Headers are constructed of lightweight stainless steel with TIG welds for durability. Special canister shape is designed to hug your bike to maximize lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 804062399 1 on hand More Info/Options for KR Tuned Titanium Full Exhaust System 804062399

$2089.99 Lonestar Racing +4 in. MTS Suspension Kit p554871 $2089.99 Manufacturer: Lonestar Racing Dennis Kirk Part #: 554871 Lonestar Racing +4 in. MTS Suspension Kit: Manufacturer part # p554871 - Delivers increased stability and cornering ability. A-arms are constructed of 4130 alloy tubing and are TIG-welded using laser cut 4130 tabs. A-arms have 4 in. extension and 1 in. backward positioning in rear. 12.5 in of wheel travel. Kit includes A-arms, extended brake lines, tie-rod extenders, axles (for use with stock CV joints) and necessary hardware. Uses stock ball joints and pivot hardware. Compatible with stock wheels and body panels; some fender trimming may be needed depending on size of tire. Designed for use with stock length shocks; it is recommended that shocks are valved and spring specifically for use with this kit. Available in natural (unfinished) or with powdercoat finish.. p554871 1 on hand More Info/Options for Lonestar Racing +4 in. MTS Suspension Kit p554871

$2075.99 Baker Drivetrain Polished Case w/2.94:1 First Gear Ratio 5-Speed Transmission 502PG $2075.99 Manufacturer: Baker Drivetrain Dennis Kirk Part #: H14877 Baker Drivetrain Polished Case w/2.94:1 First Gear Ratio 5-Speed Transmission: Manufacturer part # 502PG - If you're installing a Baker transmission, then you're installing the best, , Unsurpassed Quality: If you're looking for premium drivetrain products with unsurpassed performance and durability, you've called the right place, , Baker Drivetrains expertise comes from many years of drivetrain design and development experience, and their proud to be the originators of the most innovative drivetrain designs for the American motorcycle aftermarket, , They design and manufacture premium drivetrain products for those who demand only the best, , THEY DON'T COPY - THEY DON'T IMITATE ,. Big time transmissions with roller detent shift systems, billet steel hard chrome-plated shift forks and 6061 T-6 billet aluminum shift doors. Come with a 2.94:1 first gear ratio. Compatible with stock replacements for model years listed in the application chart below. Includes a Manufacturer's Statement of Origin (MSO). Made in the U.S.A.. NOTE:This item ships in 3-4 days after order is placed.. 502PG 1 on hand More Info/Options for Baker Drivetrain Polished Case w/2.94:1 First Gear Ratio 5-Speed Transmission 502PG

$2062.95 Moose 5500 Box 1 Rhino Long Travel +6 in. Suspension System p554932 $2062.95 Manufacturer: Moose Dennis Kirk Part #: 554932 Moose 5500 Box 1 Rhino Long Travel +6 in. Suspension System: Manufacturer part # p554932 - INCLUDED ITEMS: . F-18 Rhino iShock 100 percent chromoly constructed +6 in. arms Tie rod extenders 300m rear axles 4340 front axles Center axis ball joint set Spring pre-load tools 3-piece Front Steel braided Spyder brake lines 2-piece Rear Steel braided Spyder brake lines (2008 only) (16) stainless steel CV boot bands Instructional DVD NOTE: Order boxes 1 though 3 for 2004-07 and box 1 and two plus box 3B for 08.. p554932 1 on hand More Info/Options for Moose 5500 Box 1 Rhino Long Travel +6 in. Suspension System p554932

$2062.95 Moose 5500 Box 2 Rhino Long Travel +6 in. Suspension System p554932 $2062.95 Manufacturer: Moose Dennis Kirk Part #: 554933 Moose 5500 Box 2 Rhino Long Travel +6 in. Suspension System: Manufacturer part # p554932 - INCLUDED ITEMS: . F-18 Rhino iShock 100 percent chromoly constructed +6 in. arms Tie rod extenders 300m rear axles 4340 front axles Center axis ball joint set Spring pre-load tools 3-piece Front Steel braided Spyder brake lines 2-piece Rear Steel braided Spyder brake lines (2008 only) (16) stainless steel CV boot bands Instructional DVD NOTE: Order boxes 1 though 3 for 2004-07 and box 1 and two plus box 3B for 08.. p554932 1 on hand More Info/Options for Moose 5500 Box 2 Rhino Long Travel +6 in. Suspension System p554932

$2058.99 Chopper Guys Standard FXR Frame with Swingarm FRMFGXR $2058.99 Manufacturer: Chopper Guys Dennis Kirk Part #: 492805 Chopper Guys Standard FXR Frame with Swingarm: Manufacturer part # FRMFGXR - Rubber mount like stock. Stronger and lighter than stock. Pro-Street frames are available with or without a stock-type swingarm; both require stock rear axle(must purchase separately). Frame weights 50 pounds and swingarm weights 15 pounds. Pro-Street frame will accept a 180 series rear tire with stock 1 1/2 in. rear belt. Pro-street specs:2 in. stretch, 33 degree rake, 5/8 in. offset. The standard FXR frames has 1 in. stretch 28 degree rake. Accepts stock FXR accessories. Swingarms available separately. Brake adapter required to mount OEM brake caliper on Chopper Guys steel billet swingarm. Made in the U.S.A.. , , This item ships 3-4 days after the order is placed.. FRMFGXR 1 on hand More Info/Options for Chopper Guys Standard FXR Frame with Swingarm FRMFGXR

$2058.99 Chopper Guys Standard-Width Twin Cam FXR-Style Frame Kit with Swingarm FRMFGXRT $2058.99 Manufacturer: Chopper Guys Dennis Kirk Part #: 492807 Chopper Guys Standard-Width Twin Cam FXR-Style Frame Kit with Swingarm: Manufacturer part # FRMFGXRT - Constructed of 1 1/4 in. tubing with a 2 1/2 in. square backbone with a 28 degree rake and 1 in. backbone stretch. Works with Twin Cam A motor and FLT complete drivetrain. Includes forward or mid control mounts, and a battery box cover. Wide-tire kit accepts up to a 180mm tire with stock 1 1/2 in. belt. Wide-tire and standard-width kits will accept stock-length front ends, stock fuel tanks and most FXR stock components. Symmetrically-widened Wide Tire frame has an engine offset 5/8 in. to the left; requires custom seat. Standard-width frame is available frame-only or with swingarm. Custom billet swingarm, pivot shaft and complete axle with hardware, (unless otherwise noted), included with each kit. Rubber mounted. Includes Manufacturers Statement of Origin (MSO). , , NOTE: This item ships 3-4 business days after order is placed. FRMFGXRT 1 on hand More Info/Options for Chopper Guys Standard-Width Twin Cam FXR-Style Frame Kit with Swingarm FRMFGXRT

$2042.99 Baker Drivetrain Black Case w/2.94:1 First Gear Ratio 5-Speed Transmission 502BG $2042.99 Manufacturer: Baker Drivetrain Dennis Kirk Part #: H14878 Baker Drivetrain Black Case w/2.94:1 First Gear Ratio 5-Speed Transmission: Manufacturer part # 502BG - If you're installing a Baker transmission, then you're installing the best, , Unsurpassed Quality: If you're looking for premium drivetrain products with unsurpassed performance and durability, you've called the right place, , Baker Drivetrains expertise comes from many years of drivetrain design and development experience, and their proud to be the originators of the most innovative drivetrain designs for the American motorcycle aftermarket, , They design and manufacture premium drivetrain products for those who demand only the best, , THEY DON'T COPY - THEY DON'T IMITATE ,. Big time transmissions with roller detent shift systems, billet steel hard chrome-plated shift forks and 6061 T-6 billet aluminum shift doors. Come with a 2.94:1 first gear ratio. Compatible with stock replacements for model years listed in the application chart below. Includes a Manufacturer's Statement of Origin (MSO). Made in the U.S.A.. NOTE: This item ships in 3-4 days after order is placed.. 502BG 1 on hand More Info/Options for Baker Drivetrain Black Case w/2.94:1 First Gear Ratio 5-Speed Transmission 502BG

$2027.99 Trac Dynamics Extended Standard Swingarm p582885 $2027.99 Manufacturer: Trac Dynamics Dennis Kirk Part #: 583154 Trac Dynamics Extended Standard Swingarm : Manufacturer part # p582885 - Put that power to the ground with an extended swingarm. Lengthens the wheelbase 6" over stock. Swingarm design features an internal air tank for air shifter supply, S/T axle adjuster that provides almost six inches of wheelbase adjustment, and loop support. Air tank fittings are 1/8" NPT and come with plugs in them. Black finish. Use stock wheels and components. Must install extended rear brake line (sold separately). , , NOTE: Air tank is for use with nitrogen/air shifters. NOT FOR USE WITH NITROUS OXIDE., NOTE: Maximum pressure for air tanks is 160 lb., NOTE: Extended brake lines and 130-link or longer chain required; sold separately. NOTE: This item ships 3-4 business days after order is placed. p582885 1 on hand More Info/Options for Trac Dynamics Extended Standard Swingarm p582885