|
|
|
|
|
|
|
|
|
|
$204.99
FMF Gold Series Factory Fatty Pipe 025072 $204.99
Manufacturer: FMF
Dennis Kirk Part #: 431620
FMF Gold Series Factory Fatty Pipe: Manufacturer part # 025072 - Other manufacturers have copied Gold Series pipes but nothing beats the original. All Gold Series pipes are computer designed and dynotested to focus power gains where each machine needs it most. Every pipe goes through the Tru-Flo stamping process to ensure quality performance and optimum fit. Fatty pipe offers better bottom and top power. Features the same shaped cone sections as the popular Fatty pipe, but offers some new features. Raw, un-plated, oiled finish. Header portion uses 19-gauge steel for optimum strength and durability, and body as well as the rear use thinner 20-gauge steel for increased weight savings. Thinner steel yields 1/2 horsepower increase. All seams are hand pounded after the stamping to give a smoother transition between sections for that factory appearance.. 025072
1 on hand
More Info/Options for FMF Gold Series Factory Fatty Pipe 025072
|
|
|
|
$204.99
Saddlemen Large Highwayman Tattoo Saddlebags 35010213 $204.99
Manufacturer: Saddlemen
Dennis Kirk Part #: 506484
Saddlemen Large Highwayman Tattoo Saddlebags: Manufacturer part # 35010213 - Throw-over saddlebags featuring deep-textured embroidered flames in a variety of colors. Rugged synthetic leather construction with a hard backside and genuine leather straps. Dual-strap design features heavy-duty, lockable chrome buckles along with hidden, lockable quick-release buckles (two locks included; one per bag). Rigid backs and reinforced panels help bag keep its shape even when empty; bag supports recommended. Adjustable laced yoke for a perfect fit.. 35010213
1 on hand
More Info/Options for Saddlemen Large Highwayman Tattoo Saddlebags 35010213
|
|
|
|
|
|
$204.99
EBC Floating Rear Rotor MD513SKR $204.99
Manufacturer: EBC
Dennis Kirk Part #: 199489
EBC Floating Rear Rotor: Manufacturer part # MD513SKR - Provide better braking and improved brake alignment. No rotor distortion - reduced chance of rotor cracking. Features polished chrome carriers. Standard 11 1/2in. Rotor that bolts on with no modification - utilize standard H-D calipers. Sold each.. MD513SKR
1 on hand
More Info/Options for EBC Floating Rear Rotor MD513SKR
|
|
|
|
$204.99
Wiseco Crankshaft w/Bearings and Gaskets WPC101 $204.99
Manufacturer: Wiseco
Dennis Kirk Part #: WPC101
Wiseco Crankshaft w/Bearings and Gaskets: Manufacturer part # WPC101 - Precision-trued to OEM specifications and factory assembled. Connecting rods are double-forged to maintain superior dimensional consistency through improved grain flow. Shot-peening eliminates residual stresses and smoothly blends the rod forging surfaces. Corrosion-resistant surface treatment. Top and bottom end rod bores case hardened to 58-62 RC to optimize bearing running surface. Crank pin bearing radial running clearance is optimized to ensure maximum performance. Precision honing ensures ultra-round bearing surface. Precision-engineered oiling slots maximize rod strength and bearing life. Double-drilled small ends provide the piston pin with extra lubrication and cooling, reducing distortion of top end due to thermal transfer from the piston. Silver-coated bronze phosphor thrust washers with dimpled design increase oil retention and reduce friction between rod and washer interface. Crank pin bearings are manufactured with the highest-quality hot-rolled steel -- case hardened to 58-62 RC. Caged needle roller bearings provide the highest possible RPM. Precision-machined crank webs. Crankshaft comes with top-end bearing, premium main bearings and a complete bottom end gasket set that includes all seals and gaskets needed to do the job.. WPC101
Expected Soon
More Info/Options for Wiseco Crankshaft w/Bearings and Gaskets WPC101
|
|
|
|
$204.95
Moose ATV Full-Chassis Skid Plate 695 $204.95
Manufacturer: Moose
Dennis Kirk Part #: 513205
Moose ATV Full-Chassis Skid Plate: Manufacturer part # 695 - Made of tough 3/16 in. aluminum alloy plate. Full-body skid plates protect frame, engine cases and undercarriage. High-impact areas made from 1/4 in. extruded aluminum. Feature a clear anodized finish and an integrated, long-wearing chain guide where applicable. Custom fit for each model.. 695
1 on hand
More Info/Options for Moose ATV Full-Chassis Skid Plate 695
|
|
|
|
$204.95
Drag Specialties Predator Smooth Solo Seat 0804-0254 $204.95
Manufacturer: Drag Specialties
Dennis Kirk Part #: 454603
Drag Specialties Predator Smooth Solo Seat: Manufacturer part # 0804-0254 - Sportster models feature automotive-grade vinyl cover and lowers rider 1/2 in. compared to stock seat. Features custom-molded polyurethane foam for maximum comfort and styling. 3/16 in. ABS thermoformed seat base for a perfect fit. Rubber bumpers and fully carpeted bottom to protect paint. Fit all Drag sissy bars. Include all mounting hardware. Made in the U.S.A.. , NOTE: Fits models listed with 3.3 gallon gas tank (28 in. L x 12 in. W front), , Dimensions: , Overall Length: 27-1/2 in., Drivers Seat: Length: 15-3/4 in., Width: 11 in., Backrest Height: 4-1/2 in., Passenger Seat: Length: 11-3/4 in., Width: 7 in.. 0804-0254
1 on hand
More Info/Options for Drag Specialties Predator Smooth Solo Seat 0804-0254
|
|
|
|
$204.95
Drag Specialties Dresser Style Flame 1 1/4 in. Tattoo Handlebar for Springer 300457 $204.95
Manufacturer: Drag Specialties
Dennis Kirk Part #: H59146
Drag Specialties Dresser Style Flame 1 1/4 in. Tattoo Handlebar for Springer: Manufacturer part # 300457 - Chromed handlebars with an engraved flame design on exposed sections. Work with standard controls; drilled for internal wires. Finish is brilliant show chrome. Springer-style bars have the area between the risers increased to 1 1/4 in. for a smooth finished look; work with the OEM Springer risers and handlebar clamps. Billet gauge mounts for T-Bars are available separately in three styles. 1 1/4 in. thick risers are also available to complete the Buffalo look. Made in the U.S.A.. Bar is drilled and knurled. Knurling is 5 in. on center. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter. 300457
2 on hand
More Info/Options for Drag Specialties Dresser Style Flame 1 1/4 in. Tattoo Handlebar for Springer 300457
|
|
|
|
$204.95
Drag Specialties Dresser Style Flame 1 1/4 in. Tattoo Handlebar 300458 $204.95
Manufacturer: Drag Specialties
Dennis Kirk Part #: H59147
Drag Specialties Dresser Style Flame 1 1/4 in. Tattoo Handlebar: Manufacturer part # 300458 - Chromed handlebars with an engraved flame design on exposed sections. Work with standard controls; drilled for internal wires. Finish is brilliant show chrome. Billet gauge mounts for T-Bars are available separately in three styles. 1 1/4 in. thick risers are also available to complete the Buffalo look. Handlebar clamps cover all of the center area that is sized down to 1 in. (not available for Springer models). Made in the U.S.A., , 1" Diameter Clamping Width: 5-1/8in., Inside Width of Knurling/Outside: 2-3/4 in. / 4-1/4 in., Drilled for Internal Wiring: Yes.. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883/1200 models. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter, , Will not fit 08 Harley Davidson Touring Models (doesn't have notches in bar for electronic throttle). 300458
1 on hand
More Info/Options for Drag Specialties Dresser Style Flame 1 1/4 in. Tattoo Handlebar 300458
|
|
|
|
|
|
|
|
|
|
CLEARANCE!
Was: $251.99
Now: $204.11
Sno-Stuff X-Calibar Ski Bottoms - Red 575-500-82 $204.11
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 105918
Sno-Stuff X-Calibar Ski Bottoms - Red: Manufacturer part # 575-500-82 - This ski is the cutting edge of performance, features and style. Made of UHMW PE material. Ski design is a 1 in. steep and deep keel. Parabolic design and opposing curve fins front and back make this a non-traditional single-runner ski. This results in excellent corner-carving ability and high levels of traction. Darting effect is greatly reduced by the bell nose keel that keeps the center carbide cutting a fresh path. 6.375 in. wide at the tip of the ski. Ski blades sold in pairs; include standard wear bars (installed) and black ski loop. Mount kit must be ordered separately. Replacement wear bars sold separately. DIMENISIONS: Bottom Length: 42-3/4in.. Top Length: 40-3/4in.. Width Across Top: 6-3/8in.. MOUNTING HOLES CENTER DISTANCE FROM: Front to 1st: 16-5/8in.. 1st to 2nd: 3-1/8in.. 2nd to 3rd: 9-1/2in.. 3rd to end: 11-1/2in.. NOTE: Arctic Cat models with OEM blow-molded skis require two Arctic Cat number 0603-036 ruber dampeners to install. 575-500-82
3 on hand
More Info/Options for Sno-Stuff X-Calibar Ski Bottoms - Red 575-500-82
|
|
|
|
$203.99
Cobra FI2000R Tripot Plug-In Fuel Processor for Fuel Injected Models Only 6921604 $203.99
Manufacturer: Cobra
Dennis Kirk Part #: 201553
Cobra FI2000R Tripot Plug-In Fuel Processor for Fuel Injected Models Only: Manufacturer part # 6921604 - Proven Fi2000 now comes with more advanced tuning options for modified bikes. Step-by-step instructions. Clip into fuel-injection and go with leads that snap directly into the bikes injector bodies. Third tuning pot can be thought of as an electronic main jet. Air/fuel mixture problems are eliminated along with backfiring when decelerating. Ten settings of fuel adjustments (0-10 settings). Gives a better ride by smoothing out the powerband and throttle response. Easy to use with no downloads or map adjustments required. Waterproof circuit board. , , NOTE: Standard models not legal for operation on public highways in the state of California For California Softail models 2006 use Part No. 202477. 6921604
1 on hand
More Info/Options for Cobra FI2000R Tripot Plug-In Fuel Processor for Fuel Injected Models Only 6921604
|
|
|
|
$203.99
WSM Standard Series Top End Engine Rebuild Kit 01081814 $203.99
Manufacturer: WSM
Dennis Kirk Part #: 138328
WSM Standard Series Top End Engine Rebuild Kit: Manufacturer part # 01081814 - High-quality complete top end rebuild kits include pistons, rings, wrist pins and circlips, along with head, base, intake (where applicable) and exhaust gaskets - enough for one engine. Pistons and rings are the same design as the originals for interchangeability.. 01081814
| |
