|
Yoshimura 4-into-1 RS-5 Exhaust System w
|
|
 |
|
|
|
Yoshimura 4-into-1 RS-5 Exhaust System w
|
|
$835.99
Yoshimura 4-into-1 RS-5 Exhaust System w/Stainless Steel Header Pipe & Muffler Sleeve 1226075 $835.99
Manufacturer: Yoshimura
Dennis Kirk Part #: 4401319
Yoshimura 4-into-1 RS-5 Exhaust System w/Stainless Steel Header Pipe & Muffler Sleeve: Manufacturer part # 1226075 - Yoshimura's most cutting-edge exhaust design. RS-5 systems and slip-ons are designed to replicate the lines of the original exhaust, but give your bike the growl of its MotoGP cousin. Improved throttle response and power delivery. Features Yoshimura's trademark fit and finish and cone-style end caps. Available with stainless steel muffler in full systems. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1226075
1 on hand
More Info/Options for Yoshimura 4-into-1 RS-5 Exhaust System w/Stainless Steel Header Pipe & Muffler Sleeve 1226075
|
|
|
|
$835.99
Yoshimura TRC 4-into-1 Tri-Oval Exhaust System w/Stainless Steel Header Pipe & Polished Stainless Steel Muffler Sleeve 1116075 $835.99
Manufacturer: Yoshimura
Dennis Kirk Part #: 440036
Yoshimura TRC 4-into-1 Tri-Oval Exhaust System w/Stainless Steel Header Pipe & Polished Stainless Steel Muffler Sleeve : Manufacturer part # 1116075 - Yoshimura's newest championship-winning exhaust system. The tri-oval muffler body design provides superior ground clearance and a unique exhaust note. Cone end caps new design features a ventilation system that dissipates unwanted heat from the exhaust tip, which results in increased performance. Header and midpipe feature durable, MIG-welded stainless steel construction. Quick-release muffler is made of polished stainless steel, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1116075
1 on hand
More Info/Options for Yoshimura TRC 4-into-1 Tri-Oval Exhaust System w/Stainless Steel Header Pipe & Polished Stainless Steel Muffler Sleeve 1116075
|
|
|
|
$835.99
Yoshimura TRC 4-into-1 Tri-Oval Exhaust System w/Stainless Steel Header Pipe & Polished Stainless Steel Muffler Sleeve 1425075 $835.99
Manufacturer: Yoshimura
Dennis Kirk Part #: 4401979
Yoshimura TRC 4-into-1 Tri-Oval Exhaust System w/Stainless Steel Header Pipe & Polished Stainless Steel Muffler Sleeve: Manufacturer part # 1425075 - Yoshimura's newest championship-winning exhaust system. The tri-oval muffler body design provides superior ground clearance and a unique exhaust note. Cone end caps new design features a ventilation system that dissipates unwanted heat from the exhaust tip, which results in increased performance. Header and midpipe feature durable, MIG-welded stainless steel construction. Quick-release muffler is made of polished stainless steel. , , Included Items: , (1) Yoshimura Muffler Assembly, (1) Stainless Steel Muffler Clamp, (12) Medium Race Exhaust Spring, (1) Tailpipe, (1) Header, (4) Stainless Steel Manifold, (4) Aluminum Flange, (1) Muffler Clamps Heat Insulator, (1) Spring Puller Tool, (1) Yoshimura Vinyl Sticker, , NOTE: 4-into 1 design with muffler on the right side, , NOTE: Installation of a new exhaust system may change a motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding modifications that may need to be made during, or after, installing thier product. If a jet kit or Power Commander is recommended, see the Intake/Fuel section, NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore it is not covered by any warranty. See the Chems/Lubes section for products to help prevent or remove discoloration.. 1425075
1 on hand
More Info/Options for Yoshimura TRC 4-into-1 Tri-Oval Exhaust System w/Stainless Steel Header Pipe & Polished Stainless Steel Muffler Sleeve 1425075
|
|
|
|
$835.99
Sito 4 into 4 Chrome Megaphone Complete System 1236 $835.99
Manufacturer: Sito
Dennis Kirk Part #: 4401033
Sito 4 into 4 Chrome Megaphone Complete System: Manufacturer part # 1236 - This is a complete 4 into 4 chrome megaphone system. Exhaust System with high-quality sheet-steel construction. Robot-cut and -welded for extremely tight quality control. Design features Twin Chamber internal silencer so silencer is independent of muffler sleeve. Melamine-coated muffler body internals to protect against corrosion. Sito muffler finishes are applied in-house using high-tech plating shop to ensure quality and lasting good looks. Chrome headpipes and mufflers ., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1236
1 on hand
More Info/Options for Sito 4 into 4 Chrome Megaphone Complete System 1236
|
|
|
|
$835.99
Yoshimura 4-into-1 RS-5 Exhaust System w/Stainless Steel Header Pipe & Muffler Sleeve 1225075 $835.99
Manufacturer: Yoshimura
Dennis Kirk Part #: 4401318
Yoshimura 4-into-1 RS-5 Exhaust System w/Stainless Steel Header Pipe & Muffler Sleeve: Manufacturer part # 1225075 - Yoshimura's most cutting-edge exhaust design. RS-5 systems are designed to replicate the lines of the original exhaust, but give your bike the growl of its MotoGP cousin. Improved throttle response and power delivery. Features Yoshimura's trademark fit and finish and cone-style end caps. Stainless steel muffler in full systems. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1225075
1 on hand
More Info/Options for Yoshimura 4-into-1 RS-5 Exhaust System w/Stainless Steel Header Pipe & Muffler Sleeve 1225075
|
|
|
|
$835.99
Yoshimura 4-Into-1 Tri-Oval Race System with Stainless Steel Headerpipe and Muffler Sleeve 1120065 $835.99
Manufacturer: Yoshimura
Dennis Kirk Part #: 446855
Yoshimura 4-Into-1 Tri-Oval Race System with Stainless Steel Headerpipe and Muffler Sleeve: Manufacturer part # 1120065 - The latest in exhaust design and high performance for your sportbike. Tested and developed with three-time AMA Superbike Champion Mat Mladin. Tri-oval muffler shape for maximum cornering clearance, unique looks and a distinctive sound. Stainless steel header pipe construction with tapered, quick-release Duplex headers. Header pipes are electro-polished for the ultimate high-luster finish. Baffle is large 2.25 in. race stainless steel design, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture. Please consult the exhaust manufacturer directly with questions regarding any modifications that may be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore is not covered ny any warranty. See Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1120065
2 on hand
More Info/Options for Yoshimura 4-Into-1 Tri-Oval Race System with Stainless Steel Headerpipe and Muffler Sleeve 1120065
|
|
|
|
$835.95
Akrapovic Dual Titanium Slip-Ons With Carbon Fiber Mufflers SK12SO1DC $835.95
Manufacturer: Akrapovic
Dennis Kirk Part #: 4400405
Akrapovic Dual Titanium Slip-Ons With Carbon Fiber Mufflers : Manufacturer part # SK12SO1DC - Oval-shaped cans with titanium outer sleeves. Outlet caps, perforated inner sleeves and inlet caps are all made of titanium. Joint of the inlet caps is milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Include lightweight, compact and high-temperature-resistant carbon-fiber muffler clamps. Conical or cylindrical link pipe is made of stainless steel or titanium; shape is determined on the basis of tests of the connection of the link pipe with the muffler to obtain maximum performance increase. Carbon-fiber heat shield included, if called for in the design. NOTE: This is a general picture, the actual exhaust for your motorcycle may differ slightly Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. , , NOTE: This item ships 3-4 business days after order is placed. SK12SO1DC
1 on hand
More Info/Options for Akrapovic Dual Titanium Slip-Ons With Carbon Fiber Mufflers SK12SO1DC
|
|
|
|
$835.95
Akrapovic Dual Titanium Slip-Ons With Titanium Mufflers SK12SO1DT $835.95
Manufacturer: Akrapovic
Dennis Kirk Part #: 4400406
Akrapovic Dual Titanium Slip-Ons With Titanium Mufflers: Manufacturer part # SK12SO1DT - Oval-shaped cans with titanium outer sleeves. Outlet caps, perforated inner sleeves and inlet caps are all made of titanium. Joints of the inlet cap are milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Includes lightweight, compact and high-temperature-resistant carbon-fiber muffler clamps. Conical or cylindrical link pipe is made of stainless steel or titanium; shape is determined on the basis of tests of the connection of the link pipe with the muffler to obtain maximum performance increase. Carbon-fiber heat shield included, if called for in the design. NOTE: This is a general picture, the exhaust for your motorcycle may differ slightly Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. , , NOTE: This item ships 3-4 business days after order is placed. SK12SO1DT
1 on hand
More Info/Options for Akrapovic Dual Titanium Slip-Ons With Titanium Mufflers SK12SO1DT
|
|
|
|
$834.99
Yoshimura RS-5 Stainless Exhaust System 1200075 $834.99
Manufacturer: Yoshimura
Dennis Kirk Part #: 4402051
Yoshimura RS-5 Stainless Exhaust System: Manufacturer part # 1200075 - Yoshimura's most cutting-edge exhaust design. RS-5 systems are designed to replicate the lines of the original exhaust, but give your bike the growl of its MotoGP cousin. Improved throttle response and power delivery. Features Yoshimura's trademark fit and finish and cone-style end caps. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1200075
1 on hand
More Info/Options for Yoshimura RS-5 Stainless Exhaust System 1200075
|
|
|
|
$834.99
Yoshimura 4-into1 RS-5 Exhaust System w/Stainless Steel Header Pipe & Muffler Sleeve 1227075 $834.99
Manufacturer: Yoshimura
Dennis Kirk Part #: 4402281
Yoshimura 4-into1 RS-5 Exhaust System w/Stainless Steel Header Pipe & Muffler Sleeve: Manufacturer part # 1227075 - Yoshimura's most cutting-edge exhaust design. RS-5 systems are designed to replicate the lines of the original exhaust, but give your bike the growl of its MotoGP cousin. Improved throttle response and power delivery. Features Yoshimura's trademark fit and finish and cone-style end caps. Stainless steel muffler in full systems. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1227075
1 on hand
More Info/Options for Yoshimura 4-into1 RS-5 Exhaust System w/Stainless Steel Header Pipe & Muffler Sleeve 1227075
|
|
|
|
$834.99
Yoshimura RS-3 Oval Race Slip-On Muffler with Glossy Carbon Fiber Muffler Sleeve 1121252 $834.99
Manufacturer: Yoshimura
Dennis Kirk Part #: 4402858
Yoshimura RS-3 Oval Race Slip-On Muffler with Glossy Carbon Fiber Muffler Sleeve: Manufacturer part # 1121252 - A convenient slip-on design featuring Yoshimura's racing technology. Tailpipes are 20-gauge stainless steel to reduce weight and boost power. Baffles are stainless steel 2in. or 2.25in. diameter style. Quick-release exhaust canisters Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1121252
1 on hand
More Info/Options for Yoshimura RS-3 Oval Race Slip-On Muffler with Glossy Carbon Fiber Muffler Sleeve 1121252
|
|
|
|
CLEARANCE!
Was: $3335.99
Now: $834.00
Baker Drivetrain Polished Case w/3.24 First Gears 5-Speed Right Side Drive Transmission Assembly R511PBH $834.00
Manufacturer: Baker Drivetrain
Dennis Kirk Part #: H14923
Baker Drivetrain Polished Case w/3.24 First Gears 5-Speed Right Side Drive Transmission Assembly: Manufacturer part # R511PBH - If you're installing a Baker transmission, then you're installing the best, , Unsurpassed Quality: If you're looking for premium drivetrain products with unsurpassed performance and durability, you've called the right place, , Baker Drivetrains expertise comes from many years of drivetrain design and development experience, and their proud to be the originators of the most innovative drivetrain designs for the American motorcycle aftermarket, , They design and manufacture premium drivetrain products for those who demand only the best, , THEY DON'T COPY - THEY DON'T IMITATE ,. Works with all RSD Evolution-style frames. Include an 80-97 style single pole neutral switch; use stock clutch cables. Comes with a 3.24 first gear ratio. RSD transmissions are compatible with all OEM primary components. Includes a Manufacturer's Statement of Origin (MSO). Made in the U.S.A.. , NOTE: This item ships in 3-4 days after order is placed.. R511PBH
4 on hand
More Info/Options for Baker Drivetrain Polished Case w/3.24 First Gears 5-Speed Right Side Drive Transmission Assembly R511PBH
|
|
|
|
|
|
|
|
|
|
$832.99
Supreme Legends Tribal Chrome Forward Control w/Master Cylinder 16220083 $832.99
Manufacturer: Supreme Legends
Dennis Kirk Part #: 573185
Supreme Legends Tribal Chrome Forward Control w/Master Cylinder: Manufacturer part # 16220083 - High-quality 6061 billet aluminum construction. Mirror-bright chrome finish. Tribal series includes side-port 11/16 in. bore master cylinder and rigid-mount footpegs. Each style also includes matching shift pegs and brake pegs NOTE: 00-05 FXST applications will require kickstand bracket H50-0360 and spring plate H50-0362... 16220083
1 on hand
| | |
