Categories

• Helmets & Eyewear
• Apparel
• Exhaust
• Tires & Wheels
• Body & Windshield
• Rider & Machine Accessories
• Engine & Intake
• Drivetrain, Brakes & Suspension
• Controls & Handling
• Electrical & Lighting
• Chems, Lubes, Shop, Tools & Trailer

Catalogs

• Off Road
• Harley-Davidson
• Snowmobile
• Metric Bikes
• Watercraft

Pro Tek Top Clamp 582415, Pro Tek Top Clamp 582416

$220.99 High Lifter Outlaw Clutch Kit 382901 Dennis Kirk Part #: 382901 High Lifter Outlaw Clutch Kit 382901: Manufacturer part # HLCKK750BF1 - Specially designed to extract optimum performance from the Honda manual transmission gearbox. Raises clutch engagement by 500 rpms so the transmission taps into 25% more horsepower and 4% more torque for demanding situations, such as mud. Installation of kit takes about 2 to 2 1/2 hours. All necessary parts and detailed instructions are included.. HLCKK750BF1 1 on Hand More Info/Options for High Lifter Outlaw Clutch Kit 382901

$203.99 Willie & Max Super Black Magic Saddlebags 505939 Dennis Kirk Part #: 505939 Willie & Max Super Black Magic Saddlebags 505939: Manufacturer part # SB73605 - Sport the same unique styling as Part no. 50-5935, the Black Magic saddlebags but in a larger size -- supplying you with optimum load capacity. Fastex quick connector located under the buckle strap. Zipper can be locked to the D-ring attachments on the bag with a small padlock (not included) or a cable tie. Zippered yoke assemblies and convenient removable carrying handle. Carry handle is unique in that you can carry both bags with one handle. Made of black synthetic leather with a plastic reinforcement for shape retention. Measurement: 16 in. L x 6 1/2 in. W x 11 in. H. Note: Locking fastex buckles and keys are not available.. SB73605 2 on Hand More Info/Options for Willie & Max Super Black Magic Saddlebags 505939

$213.99 Maier ATV Rear Fender 61334 Dennis Kirk Part #: 61334 Maier ATV Rear Fender 61334: Manufacturer part # 11982 - Fit each model precisely at a fraction of the OEM cost. Constructed of high-density polyethylene for unsurpassed strength. Use stock mounting hardware. NOTE: Color matched to original equipment. 11982 2 on Hand More Info/Options for Maier ATV Rear Fender 61334

$170.99 Braking 270mm Oversized Rotor 1900487 Dennis Kirk Part #: 1900487 Braking 270mm Oversized Rotor 1900487: Manufacturer part # SZ01FLD270 - 270mm oversized rotor increases leverage, provides more power and feel with less effort. Rotor expands and contracts as they heat up without warping. Maximize stopping power while remaining perfectly flat. Covered by an international license. Bracket is precision CNC-machined from 7075 billet aluminum. Includes top-quality Braking pads. Sold each. , NOTE: Must use the correct caliper relocation bracket to fit any oversize rotor. SZ01FLD270 Expected Soon More Info/Options for Braking 270mm Oversized Rotor 1900487

$203.99 Arvin/Ryde FX 8600 Series - Aluminum Body Cell Adjustable Shock 105725 Dennis Kirk Part #: 105725 Arvin/Ryde FX 8600 Series - Aluminum Body Cell Adjustable Shock 105725: Manufacturer part # 8607 - Lightweight, anodized aluminum shock body combines superior corrosion resistance and heat dissipation. Shock has 300 percent range of adjustability with compression adjustment screw. Shock gas cell is maintenance-free, eliminating oil foaming and providing consistent performance throughout the life of the shock. Wide range of spring preload adjustment from threaded shock body. Hard bottoming is eliminated by a microcellular urethane bumper (where applicable) that stays soft even in extreme conditions. Moisture is prevented from entering the shock and contaminating the oil using the ice scraper device (where applicable) to keep ice off of the shock rod.. 8607 1 on Hand More Info/Options for Arvin/Ryde FX 8600 Series - Aluminum Body Cell Adjustable Shock 105725

$203.99 Pro Tek Top Clamp 582425 Dennis Kirk Part #: 582425 Pro Tek Top Clamp 582425: Manufacturer part # TC90 - CNC machined from 6061 T-6 billet aerospace aluminum. Comes complete with top drawer stainless polished hardware. Triple-chrome plated for show look. Direct bolt-on for models listed.. TC90 2 on Hand More Info/Options for Pro Tek Top Clamp 582425

$170.99 Braking 270mm Oversized Rotor 1900488 Dennis Kirk Part #: 1900488 Braking 270mm Oversized Rotor 1900488: Manufacturer part # SZ37FLD270 - 270mm oversized rotor increases leverage, provides more power and feel with less effort. Rotor expands and contracts as they heat up without warping. Maximize stopping power while remaining perfectly flat. Covered by an international license. Bracket is precision CNC-machined from 7075 billet aluminum. Includes top-quality Braking pads. Sold each. , NOTE: Must use the correct caliper relocation bracket to fit any oversize rotor. SZ37FLD270 1 on Hand More Info/Options for Braking 270mm Oversized Rotor 1900488

$203.99 Pro Tek Top Clamp 582662 Dennis Kirk Part #: 582662 Pro Tek Top Clamp 582662: Manufacturer part # TC100 - CNC machined from 6061 T-6 billet aerospace aluminum. Comes complete with top drawer stainless polished hardware. Triple-chrome plated for show look. Direct bolt-on for models listed.. TC100 1 on Hand More Info/Options for Pro Tek Top Clamp 582662

$170.99 Braking 270mm Oversized Rotor 1900484 Dennis Kirk Part #: 1900484 Braking 270mm Oversized Rotor 1900484: Manufacturer part # KW39FLD270 - 270mm oversized rotor increases leverage, provides more power and feel with less effort. Rotor expands and contracts as they heat up without warping. Maximize stopping power while remaining perfectly flat. Covered by an international license. Bracket is precision CNC-machined from 7075 billet aluminum. Includes top-quality Braking pads. Sold each. , NOTE: Must use the correct caliper relocation bracket to fit any oversize rotor. KW39FLD270 1 on Hand More Info/Options for Braking 270mm Oversized Rotor 1900484

$203.99 Wild 1 Inc. Low-Profile Pullback Drag Bars 595671 Dennis Kirk Part #: 595671 Wild 1 Inc. Low-Profile Pullback Drag Bars 595671: These 1 1/4" diameter handlebars are 25% thicker than stock handlebars. Designed with fluid bends at precise angles to provide maximum comfort and control. Pre-drilled for internal wiring and feature a dimpled and diamond knurled design in a show-chromed finish. Work with stock and most custom controls, stock risers and top clamps. Made in the U.S.A... 1 on Hand More Info/Options for Wild 1 Inc. Low-Profile Pullback Drag Bars 595671

$203.99 Pro Tek Top Clamp 582421 Dennis Kirk Part #: 582421 Pro Tek Top Clamp 582421: Manufacturer part # TC30 - CNC machined from 6061 T-6 billet aerospace aluminum. Comes complete with top drawer stainless polished hardware. Triple-chrome plated for show look. Direct bolt-on for models listed.. TC30 1 on Hand More Info/Options for Pro Tek Top Clamp 582421

$170.99 Braking 270mm Oversized Rotor 1900482 Dennis Kirk Part #: 1900482 Braking 270mm Oversized Rotor 1900482: Manufacturer part # KW35FLD270 - 270mm oversized rotor increases leverage, provides more power and feel with less effort. Rotor expands and contracts as they heat up without warping. Maximize stopping power while remaining perfectly flat. Covered by an international license. Bracket is precision CNC-machined from 7075 billet aluminum. Includes top-quality Braking pads. Sold each. , NOTE: Must use the correct caliper relocation bracket to fit any oversize rotor. KW35FLD270 1 on Hand More Info/Options for Braking 270mm Oversized Rotor 1900482

$220.99 High Lifter Outlaw ATV Super-Extreme Clutch Kit 383269 Dennis Kirk Part #: 383269 High Lifter Outlaw ATV Super-Extreme Clutch Kit 383269: Manufacturer part # HLCKA650TSX - Upgrade from the Outlaw super-duty clutch kit for ATVs sporting 28 in. and larger tires; for ATVs with 26 in.-27 in. tires, see Outlaw Super-Duty ATV clutch kits. Make better use of available low-end engine torque, improve shift and back shift characteristics, and reduce belt slippage, overheating, and wear. Specifically tuned for use with the largest, most aggressive mud tires used in very muddy conditions. INCLUDED ITEMS: , (4) Weights, (1) Red Primary Spring, (1) Maroon Primary Spring, (1) Yellow Secondary Spring. HLCKA650TSX 1 on Hand More Info/Options for High Lifter Outlaw ATV Super-Extreme Clutch Kit 383269

$203.99 Pro Tek Top Clamp 582416 Dennis Kirk Part #: 582416 Pro Tek Top Clamp 582416: Manufacturer part # TC45 - CNC machined from 6061 T-6 billet aerospace aluminum. Comes complete with top drawer stainless polished hardware. Triple-chrome plated for show look. Direct bolt-on for models listed.. TC45 1 on Hand More Info/Options for Pro Tek Top Clamp 582416

$203.99 Ryde FX 9200 - Aluminum Body Gas Cell Adjustable Shock 105722 Dennis Kirk Part #: 105722 Ryde FX 9200 - Aluminum Body Gas Cell Adjustable Shock 105722: Manufacturer part # 8601 - Lightweight, anodized aluminum shock body combines superior corrosion resistance and heat dissipation. Shock has 300 percent range of adjustability with compression adjustment screw. Shock gas cell is maintenance-free, eliminating oil foaming and providing consistent performance throughout the life of the shock. Wide range of spring preload adjustment from threaded shock body. Hard bottoming is eliminated by a microcellular urethane bumper (where applicable) that stays soft even in extreme conditions. Moisture is prevented from entering the shock and contaminating the oil using the ice scraper device (where applicable) to keep ice off of the shock rod.. 8601 3 on Hand More Info/Options for Ryde FX 9200 - Aluminum Body Gas Cell Adjustable Shock 105722

$203.99 Kustomwerks Custom Softail Rear Fender 392500 Dennis Kirk Part #: 392500 Kustomwerks Custom Softail Rear Fender 392500: Manufacturer part # 11389 - Heavy duty rear fender for Softail-style frames. Fender is made from 0.080 Inch (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders this one wont split or crack down the middle. The fender has been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. Supplied raw, un-trimmed and un-drilled for custom applications.. , , Must be pre-fitted before painting.. 11389 3 on Hand More Info/Options for Kustomwerks Custom Softail Rear Fender 392500

$203.99 Kustomwerks Round Top Softail Rear Fender 392501 Dennis Kirk Part #: 392501 Kustomwerks Round Top Softail Rear Fender 392501: Manufacturer part # 11390 - Heavy duty rear fender for Softail-style frames. Fender is made from 0.080 Inch (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders this one wont split or crack down the middle. The fender has been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. Supplied raw, un-trimmed and un-drilled for custom applications. , , Must be pre-fitted before painting.. 11390 1 on Hand More Info/Options for Kustomwerks Round Top Softail Rear Fender 392501

$203.99 Cobra Saddlebag Side Rails 492173 Dennis Kirk Part #: 492173 Cobra Saddlebag Side Rails 492173: Manufacturer part # 026942 - Visual upgrade adds a classic look as it wards off scuffs and scratches. Round, chrome rails match the contour of OEM hard saddlebags.. 026942 1 on Hand More Info/Options for Cobra Saddlebag Side Rails 492173

$203.99 Cobra Side Rails for OEM Hard Saddlebag 49657 Dennis Kirk Part #: 49657 Cobra Side Rails for OEM Hard Saddlebag 49657: Manufacturer part # 026941 - Visual upgrade adds a classic look as it wards off scuffs and scratches. Round, chrome rails match the contour of OEM hard saddlebags.. 026941 Expected Soon More Info/Options for Cobra Side Rails for OEM Hard Saddlebag 49657

$203.99 Pro Tek Top Clamp 582415 Dennis Kirk Part #: 582415 Pro Tek Top Clamp 582415: Manufacturer part # TC40 - CNC machined from 6061 T-6 billet aerospace aluminum. Comes complete with top drawer stainless polished hardware. Triple-chrome plated for show look. Direct bolt-on for models listed.. TC40 2 on Hand More Info/Options for Pro Tek Top Clamp 582415

$170.99 Braking 260mm Oversized Rotor 1900485 Dennis Kirk Part #: 1900485 Braking 260mm Oversized Rotor 1900485: Manufacturer part # KW39FLOWD - 260mm oversized rotor increases leverage, provides more power and feel with less effort. Rotor expands and contracts as they heat up without warping. Maximize stopping power while remaining perfectly flat. Covered by an international license. Bracket is precision CNC-machined from 7075 billet aluminum. Includes top-quality Braking pads. Sold each. , NOTE: Must use the correct caliper relocation bracket to fit any oversize rotor. KW39FLOWD 1 on Hand More Info/Options for Braking 260mm Oversized Rotor 1900485

$213.99 Maier ATV Rear Fender 391426 Dennis Kirk Part #: 391426 Maier ATV Rear Fender 391426: Manufacturer part # 17775 - Fit each model precisely at a fraction of the OEM cost. Constructed of high-density polyethylene for unsurpassed strength. Use stock mounting hardware. NOTE: Color matched to original equipment. 17775 1 on Hand More Info/Options for Maier ATV Rear Fender 391426

$220.99 High Lifter Outlaw ATV Super-Extreme Clutch Kit 383272 Dennis Kirk Part #: 383272 High Lifter Outlaw ATV Super-Extreme Clutch Kit 383272: Manufacturer part # HLCKK750BFSX - Upgrade from the Outlaw super-duty clutch kit for ATVs sporting 28 in. and larger tires; for ATVs with 26 in.-27 in. tires, see Outlaw Super-Duty ATV clutch kits. Make better use of available low-end engine torque, improve shift and back shift characteristics, and reduce belt slippage, overheating, and wear. Specifically tuned for use with the largest, most aggressive mud tires used in very muddy conditions. INCLUDED ITEMS: , (4) Weights, (1) Red Primary Spring, (1) Maroon Primary Spring, (1) Yellow Secondary Spring. HLCKK750BFSX 1 on Hand More Info/Options for High Lifter Outlaw ATV Super-Extreme Clutch Kit 383272

$203.99 Pro Tek Top Clamp 582423 Dennis Kirk Part #: 582423 Pro Tek Top Clamp 582423: Manufacturer part # TC80 - CNC machined from 6061 T-6 billet aerospace aluminum. Comes complete with top drawer stainless polished hardware. Triple-chrome plated for show look. Direct bolt-on for models listed.. TC80 1 on Hand More Info/Options for Pro Tek Top Clamp 582423

$203.99 Joker Machine Finned Bullet Stinger Breathers 183291 Dennis Kirk Part #: 183291 Joker Machine Finned Bullet Stinger Breathers 183291: Manufacturer part # 02-50 - Vintage style grooved look. Includes easily serviceable filter that can be removed with 2 set screws. Fully chrome plated billet construction with excellent venting capability. Lower section can be rotated with vent openings in any desired position. Purchase support bracket and (5/16 in. for Twin Cam or 1/2 in. for EVO Big Twin and XL) breather bolts separately in pairs. Designed for models that breathe through the heads. Made in the USA.. 02-50