|
|
|
|
|
|
$206.99
RK GB530GXW Sealed Ring Chain 110
Dennis Kirk Part #: 119363110
RK GB530GXW Sealed Ring Chain 110: Manufacturer part # GB530GXW110 - RK racing chains have been the overwhelming choice of World Championship Teams for the past two decades. They have benefited from their long-term OEM relationships with the major Japanese motorcycle manufacturers - RK has supplied original chains and chains for racing. All high-quality RK chains are made in Japan except the standard RKM series, which are from Malaysia. All RK chains feature quad-staked pin riveting, solid rollers and solid bushings, except the RKM and standard series, which have two-point riveting and curled bushings. They are all pre-stressed and pre-stretched for better performance with fewer adjustments. XW-Ring Sealed Chain (GXW) are the leading edge XW-ring features a Nitrile Butadiene composite construction with 6 sealing points and 3 lubrication pools. The Nitrile Butadiene composite is oil and contaminant resistant - the XW design is compression and distortion resistant to provide the ultimate in efficiency and performance. 100 percent longer wear life than basic O-ring chain. Sealing Ring - XW-ring. Maximum Engine Size - 1400cc. Wear Life Index - 900 (wear life index should be used as a comparison for probable wear life under identical circumstances. Tensile Strength - 10,000 lbs. High-performance sealed chain. If your motorcycle came factory-equipped with an O-ring chain, it must be replaced with an O-ring chain. Rivet Master link is included NOTE: For replacement Rivet connecting link oder part no. 11-9364.. GB530GXW110
2 on Hand
More Info/Options for RK GB530GXW Sealed Ring Chain 110
|
|
|
|
$206.99
X-Small Joe Rocket Yamaha Luv Jackets
Dennis Kirk Part #: 3548466XS
X-Small Joe Rocket Yamaha Luv Jackets: Hitena Textile Shell. C.E. rated protectors in shoulders and elbows. Removable spine pad with pocket for optional C.E. spine protector. Variable Flow ventilation system. Removable insulated vest liner. Sure Fit adjustable waistband. 8 in. zipper for pant attachment. Reflective stripe. Official licensed Yamaha product..
1 on Hand
More Info/Options for X-Small Joe Rocket Yamaha Luv Jackets
|
|
|
|
|
|
$206.99
WPC128 Wiseco Crankshaft
Dennis Kirk Part #: WPC128
WPC128 Wiseco Crankshaft: Manufacturer part # WPC128 - Precision-trued to OEM specifications and factory assembled. Connecting rods are double-forged to maintain superior dimensional consistency through improved grain flow. Shot-peening eliminates residual stresses and smoothly blends the rod forging surfaces. Corrosion-resistant surface treatment. Top and bottom end rod bores case hardened to 58-62 RC to optimize bearing running surface. Crank pin bearing radial running clearance is optimized to ensure maximum performance. Precision honing ensures ultra-round bearing surface. Precision-engineered oiling slots maximize rod strength and bearing life. Double-drilled small ends provide the piston pin with extra lubrication and cooling, reducing distortion of top end due to thermal transfer from the piston. Silver-coated bronze phosphor thrust washers with dimpled design increase oil retention and reduce friction between rod and washer interface. Crank pin bearings are manufactured with the highest-quality hot-rolled steel -- case hardened to 58-62 RC. Caged needle roller bearings provide the highest possible RPM. Precision-machined crank webs. Crankshaft comes with top-end bearing. Connecting rod kits come complete with rod, crank pin, crank pin bearing, top-end bearing and thrust washers.. WPC128
1 on Hand
More Info/Options for WPC128 Wiseco Crankshaft
|
|
|
|
$206.99
Large Joe Rocket Yamaha Luv Jackets
Dennis Kirk Part #: 3548466L
Large Joe Rocket Yamaha Luv Jackets: Hitena Textile Shell. C.E. rated protectors in shoulders and elbows. Removable spine pad with pocket for optional C.E. spine protector. Variable Flow ventilation system. Removable insulated vest liner. Sure Fit adjustable waistband. 8 in. zipper for pant attachment. Reflective stripe. Official licensed Yamaha product..
2 on Hand
More Info/Options for Large Joe Rocket Yamaha Luv Jackets
|
|
|
|
|
|
$206.99
Medium Joe Rocket Kawasaki Jet-Z Jackets
Dennis Kirk Part #: 3548480M
Medium Joe Rocket Kawasaki Jet-Z Jackets: Hitena Textile Shell. C.E. Rated Protectors in Shoulders & Elbows. Removable spine pad with pocket for optional C.E. spine protector. Variable Flow ventilation system. Removable insulated vest liner. Sure Fit adjustable waistband. 8 in. zipper for pant attachment. Reflective stripe. Official licensed Kawasaki product..
1 on Hand
More Info/Options for Medium Joe Rocket Kawasaki Jet-Z Jackets
|
|
|
|
|
|
|
|
$236.99
4786M09700 Wiseco Piston Assembly - 97mm Bore
Dennis Kirk Part #: 4786M09700
4786M09700 Wiseco Piston Assembly - 97mm Bore: Manufacturer part # 4786M09700 - Wiseco forged pistons are superior in strength and design. 13.5:1 high compression. Nikasil Bore - cylinder sleeving or rplating reequired for oversizes. We carry the full line of Wiseco forged pistons, big bore kits and related items INCLUDED ITEMS: One piston. One set 3819XS rings. One set CW18 circlips. One S600 wrist pin.. 4786M09700
1 on Hand
More Info/Options for 4786M09700 Wiseco Piston Assembly - 97mm Bore
|
|
|
|
$204.99
WPC134 Wiseco Crankshaft
Dennis Kirk Part #: WPC134
WPC134 Wiseco Crankshaft: Manufacturer part # WPC134 - Precision-trued to OEM specifications and factory assembled. Connecting rods are double-forged to maintain superior dimensional consistency through improved grain flow. Shot-peening eliminates residual stresses and smoothly blends the rod forging surfaces. Corrosion-resistant surface treatment. Top and bottom end rod bores case hardened to 58-62 RC to optimize bearing running surface. Crank pin bearing radial running clearance is optimized to ensure maximum performance. Precision honing ensures ultra-round bearing surface. Precision-engineered oiling slots maximize rod strength and bearing life. Double-drilled small ends provide the piston pin with extra lubrication and cooling, reducing distortion of top end due to thermal transfer from the piston. Silver-coated bronze phosphor thrust washers with dimpled design increase oil retention and reduce friction between rod and washer interface. Crank pin bearings are manufactured with the highest-quality hot-rolled steel -- case hardened to 58-62 RC. Caged needle roller bearings provide the highest possible RPM. Precision-machined crank webs. Crankshaft comes with top-end bearing. Connecting rod kits come complete with rod, crank pin, crank pin bearing, top-end bearing and thrust washers.. WPC134
2 on Hand
More Info/Options for WPC134 Wiseco Crankshaft
|
|
|
|
$206.99
Medium Joe Rocket Yamaha Luv Jackets
Dennis Kirk Part #: 3548466M
Medium Joe Rocket Yamaha Luv Jackets: Hitena Textile Shell. C.E. rated protectors in shoulders and elbows. Removable spine pad with pocket for optional C.E. spine protector. Variable Flow ventilation system. Removable insulated vest liner. Sure Fit adjustable waistband. 8 in. zipper for pant attachment. Reflective stripe. Official licensed Yamaha product..
1 on Hand
More Info/Options for Medium Joe Rocket Yamaha Luv Jackets
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$206.99
Regina OEM Chain and Sprocket Kits 805033
Dennis Kirk Part #: 805033
Regina OEM Chain and Sprocket Kits 805033: Manufacturer part # 7ZRP112KHO01 - Convenient kits contain front sprocket, rear sprocket and precut chain. Sprockets are made of high-quality steel and have OEM gearing. Chain is Regina's high-performance Z-ring series with gold outer plates and Z40 sealing rings, which dramatically improves performance and wear life; includes both clip- and rivet-type masterlinks. 520 conversion kits include all the above, but the rear sprocket is aluminum rather than steel, which in some applications reduces the chain + sprocket weight by as much as 2.5 lb ZRD chains have a tensile strength of 7,870 (lbs), maximum engine size is 900cc, and the weight per 100 links is 3.8(lbs).. 7ZRP112KHO01
Expected Soon
More Info/Options for Regina OEM Chain and Sprocket Kits 805033
|
|
|
|
$206.99
Small Joe Rocket Kawasaki Jet-Z Jackets
Dennis Kirk Part #: 3548480S
Small Joe Rocket Kawasaki Jet-Z Jackets: Hitena Textile Shell. C.E. Rated Protectors in Shoulders & Elbows. Removable spine pad with pocket for optional C.E. spine protector. Variable Flow ventilation system. Removable insulated vest liner. Sure Fit adjustable waistband. 8 in. zipper for pant attachment. Reflective stripe. Official licensed Kawasaki product..
2 on Hand
More Info/Options for Small Joe Rocket Kawasaki Jet-Z Jackets
|
|
|
|
|
|
$206.99
XX-Large Joe Rocket Kawasaki Racing Superstock Textile Jackets
Dennis Kirk Part #: 3565437XXL
XX-Large Joe Rocket Kawasaki Racing Superstock Textile Jackets: Manufacturer part # 652-3006 - Heavy duty 630 Hitena twill nylon outer. C.E. rated protectors in shoulders and elbows. Removable spine pad with pocket for optional C.E. spine protector. Variable Flow ventilation system. Removable insulated vest-liner. Elastic sleeve adjusters. Sure Fit adjustable waistband. 8 in. zipper for pant attachment. Reflective stripe. Official licensed Kawasaki product.. 652-3006
| |
