Categories

• Helmets & Eyewear
• Apparel
• Exhaust
• Tires & Wheels
• Body & Windshield
• Rider & Machine Accessories
• Engine & Intake
• Drivetrain, Brakes & Suspension
• Controls & Handling
• Electrical & Lighting
• Chems, Lubes, Shop, Tools & Trailer

Catalogs

• Off Road
• Harley-Davidson
• Snowmobile
• Metric Bikes
• Watercraft

Alpinestars Spinner Jacket 31028514, Wiseco, Lindby Custom Multibars 1301

$254.99 Wiseco .040 Piston Kit K1644 $254.99 Manufacturer: Wiseco Dennis Kirk Part #: K1644 Wiseco .040 Piston Kit: Manufacturer part # K1644 - Get low expansion at high temperatures and great operating strength from a respected name - Wiseco. All Wiseco pistons sold by Dennis Kirk are forged from a high-silicone aluminum alloy for superior strength and consistent dimension, even in high stress conditions. Available with X-rings (.062 top ring, .062 compression ring and .158 oil ring). Kits include two pistons, rings, piston pins and circlips. Components also sold separately; replacement rings (3497X) include enough rings for one piston; replacement wrist pins (S534)sold each; replacement circlips (W5731)sold in pairs. , NOTE: Wiseco pistons can only be fitted with Wiseco rings. K1644 1 on hand More Info/Options for Wiseco .040 Piston Kit K1644

$254.99 Wiseco PK Piston Kit - 77mm Bore PK1239 $254.99 Manufacturer: Wiseco Dennis Kirk Part #: PK1239 Wiseco PK Piston Kit - 77mm Bore: Manufacturer part # PK1239 - 13:1 High-Compression Contain all the necessary components for overboring or rebuilding your top end. Feature forged pistons, rings, wrist pins, circlips and top end gasket set. Cylinder sleeves must be purchased separately. , , Included Items:. , 1. (1) W6255 top end gasket kit. , 2. (1) 4843M07700 Piston Kit.. PK1239 1 on hand More Info/Options for Wiseco PK Piston Kit - 77mm Bore PK1239

$254.99 Sito Chrome Tapered Tip Style Dual Slip-On Mufflers 1208 $254.99 Manufacturer: Sito Dennis Kirk Part #: 4401017 Sito Chrome Tapered Tip Style Dual Slip-On Mufflers: Manufacturer part # 1208 - Replacement chrome tapered style dual slip-on mufflers with high-quality sheet-steel construction. Robot-cut and -welded for extremely tight quality control. Design features Twin Chamber internal silencer so silencer is independent of muffler sleeve. Melamine-coated muffler body internals to protect against corrosion. Sito muffler finishes are applied in-house using high-tech plating shop to ensure quality and lasting good looks. Mufflers install to OEM headers. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1208 3 on hand More Info/Options for Sito Chrome Tapered Tip Style Dual Slip-On Mufflers 1208

$254.99 Metro Vacuum Air Force Blaster B-3 Dryer 900 $254.99 Manufacturer: Metro Vacuum Dennis Kirk Part #: 281978 Metro Vacuum Air Force Blaster B-3 Dryer: Manufacturer part # 900 - Powerful dryer cuts drying time by as much as 75%. 9.5A, 4.0hp (peak) motor produces 29,250 ft./min. airflow with a two-stage dual fan. Power unit features sturdy all-steel construction for durability. Includes 10' L x 1 1/2" dia. commercial-strength flexible hose and heavy-duty neoprene blower nozzle. Also includes 12' L heavy-duty three-prong cord and EZ-change foam filter. Weighs only 8 lb. Optional bracket and 10' hose (282599) allows the dryer to be mounted to wall or table, and extends its effective range to 20' for ease of use. Optional carrying case (282600) also available for easy transport and storage.. 900 7 on hand More Info/Options for Metro Vacuum Air Force Blaster B-3 Dryer 900

$254.99 Andrews TW44 Chain Driven Grind Cam 216344 $254.99 Manufacturer: Andrews Dennis Kirk Part #: 149904 Andrews TW44 Chain Driven Grind Cam: Manufacturer part # 216344 - Andrews Products grinds its cams using a computer with cam design capabilities. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel billets and heat-treating processes are used. The power in a Harley Twin Cam engine is completely released only when superior Andrews computer-designed high-performance cams are installed. Cams come with new bearings (1 roller and 1 ball). Andrews recommends using their steel cam drive sprocket H11-120 and crankshaft cam drive sprocket H14-175 (must be purchased separately). , , TW44 Grind Cams Maximum torque and horsepower at middle and upper rpm range(2400-6000 rpms). Designed for engines with 9.5:1 compression ratio or higher and with 88-95in.. Work best with carburetor. Can be used with stock springs and tappets.. 216344 1 on hand More Info/Options for Andrews TW44 Chain Driven Grind Cam 216344

$254.99 Sito Chrome Tapered Style Dual Slip-on Mufflers 1237 $254.99 Manufacturer: Sito Dennis Kirk Part #: 4401010 Sito Chrome Tapered Style Dual Slip-on Mufflers: Manufacturer part # 1237 - Replacement chrome tapered style dual slip-on mufflers with high-quality sheet-steel construction. Robot-cut and -welded for extremely tight quality control. Design features Twin Chamber internal silencer so silencer is independent of muffler sleeve. Melamine-coated muffler body internals to protect against corrosion. Sito muffler finishes are applied in-house using high-tech plating shop to ensure quality and lasting good looks. Mufflers install to OEM headers. , , NOTE: Includes taper style mufflers Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1237 1 on hand More Info/Options for Sito Chrome Tapered Style Dual Slip-on Mufflers 1237

$254.99 Lindby Custom Multibars 1305 $254.99 Manufacturer: Lindby Custom Dennis Kirk Part #: 493805 Lindby Custom Multibars: Manufacturer part # 1305 - Each bar is made from a single piece of 1 1/4in. tubing thats triple chrome-plated. Patent-pending design with built-in bonded rubber footrests that provide traction and allow riders to adjust their position. Easily installed with included hardware. For replacement pads order part number 49-3506. Fits models listed with mid-mount controls. , , Included Items:, (1) Highway Bar, (2) 3/8in. x 1-1/4in. hex bolts, (1) 5/16in. x 1in. hex bolts, (2) 3/8in. Nylock Nuts, (4) 3/8in. Flat Washers, (1) 5/16in. Nylock Nut, (2) 5/16in. Flat Washers.. 1305 1 on hand More Info/Options for Lindby Custom Multibars 1305

$254.99 V-Factor Dual Disc Handlebar Control Kit w/Switch Housing 44732 $254.99 Manufacturer: V-Factor Dennis Kirk Part #: 574392 V-Factor Dual Disc Handlebar Control Kit w/Switch Housing: Manufacturer part # 44732 - Replace your black handlebar control kit with one of these high quality chrome plated versions. Use with OEM switches or our replacement switches.. 44732 1 on hand More Info/Options for V-Factor Dual Disc Handlebar Control Kit w/Switch Housing 44732

$254.99 Lindby Custom Multibars 1301 $254.99 Manufacturer: Lindby Custom Dennis Kirk Part #: 493803 Lindby Custom Multibars: Manufacturer part # 1301 - Each bar is made from a single piece of 1 1/4" tubing that's triple chrome-plated. Patent-pending design with built-in bonded rubber footrests that provide traction and allow riders to adjust their position. Easily installed with included hardware. For replacment pads order part number 49-3506. 1301 Expected Soon More Info/Options for Lindby Custom Multibars 1301

$254.99 Lindby Custom Multibars 1310 $254.99 Manufacturer: Lindby Custom Dennis Kirk Part #: 493505 Lindby Custom Multibars: Manufacturer part # 1310 - Each bar is made from a single piece of 1 1/4" tubing that's triple chrome-plated. Patent-pending design with built-in bonded rubber footrests that provide traction and allow riders to adjust their position. Easily installed with included hardware. For replacement foot pads use part number 49-3506. 1310 1 on hand More Info/Options for Lindby Custom Multibars 1310

$254.99 V-Factor Single Disc Handlebar Control Kit w/Switch Housing 44733 $254.99 Manufacturer: V-Factor Dennis Kirk Part #: 574393 V-Factor Single Disc Handlebar Control Kit w/Switch Housing: Manufacturer part # 44733 - Replace your black handlebar control kit with one of these high quality chrome plated versions. Use with OEM switches or our replacement switches.. 44733 1 on hand More Info/Options for V-Factor Single Disc Handlebar Control Kit w/Switch Housing 44733

$254.99 Solas Concord Impeller ST-CD-1722 $254.99 Manufacturer: Solas Dennis Kirk Part #: 091436 Solas Concord Impeller: Manufacturer part # ST-CD-1722 - Made of ultra-high-strength and corrosion-resistant stainless steel. Exclusive hub-end water seal keeps water and dirt from causing undue wear. Mirror-smooth finish and polished hub. Casting creates the impeller pitches -- other impellers rely on bending. Use the Solas cross-reference chart to find the proper impeller installation tools. Seal included. This unique impeller couples enhanced maneuverability at any speed with excellent inital hookup. Low-speed torque and all-out high speed in one variable-pitch Impeller. , , HOW TO SELECT IMPELLERS 1. The more horsepower a watercraft has, the higher the impeller's pitch angle can be.. 2. If rpm tend to run too high, a higher pitch angle is recommended.. 3. Higher pitch angles are recommended for use in cold climates.. 4. Higher pitch angles are recommended for top-speed performance, but will lower acceleration.. 5. Lower pitch angles are recommended for heavier boats.. 6. Lower pitch angles are recommended for higher altitudes.. 7. Lower pitch angles are recommended for towing.. 8. Lower pitch angles are recommended for acceleration performance, but will lower top end.. , , NOTE:The following tool is required for installing and removing the Impeller Part No. 09-0451. ST-CD-1722 2 on hand More Info/Options for Solas Concord Impeller ST-CD-1722

$254.99 Leo Vince MotoGP Stainless Steel Cat Eliminator Pipe 6697 $254.99 Manufacturer: Leo Vince Dennis Kirk Part #: 4402908 Leo Vince MotoGP Stainless Steel Cat Eliminator Pipe: Manufacturer part # 6697 - Leo Vince's experience with top teams from MotoGP went into the look and performance of these mufflers. Significant power and torque increases. TIG-welded AISI 304 stainless steel silencer and connectors are sandblasted with stainless steel particles for a "factory" finish. Muffler outlet features a removable noise reducer that reduces sound without restricting performance. Mount to the frame with carbon fiber brackets. Stainless steel cat eliminator pipe eliminates the OEM catalytic converter for track days or racing (link pipe may only be used with Leo Vince mufflers, not for use with stock mufflers); not intended for street use; include hardware to remove stock exhaust valve and to override OEM fuel-injection sensor, , NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. 6697 1 on hand More Info/Options for Leo Vince MotoGP Stainless Steel Cat Eliminator Pipe 6697

$254.99 Lindby Custom Multibars 1311 $254.99 Manufacturer: Lindby Custom Dennis Kirk Part #: 493806 Lindby Custom Multibars: Manufacturer part # 1311 - Each bar is made from a single piece of 1 1/4" tubing that's triple chrome-plated. Patent-pending design with built-in bonded rubber footrests that provide traction and allow riders to adjust their position. Easily installed with included hardware. For replacement pads use part number 49-3506. , , Included Items:, (1)Highway Bar, (2)3/8in. X1-1/2in. Hex Bolts, (1) 5/16in. X 1in. Hex Bolt, (2) 3/8in. Nylock Nut, (4) 3/8in. Flat Washers.. 1311 1 on hand More Info/Options for Lindby Custom Multibars 1311

$254.99 Andrews TW50 Grind Cams 216350 $254.99 Manufacturer: Andrews Dennis Kirk Part #: 149905 Andrews TW50 Grind Cams: Manufacturer part # 216350 - Andrews Products is recognized world wide and throughout the Motor Sports community as an industry leader.. Andrews Products grind its cams using computer-aided cam design capabilities. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel billets and heat treating processes are used. The power in a Harley Twin Cam engine is completely released only when superior Andrews computer-designed high- performance cams are installed. Cams come with new bearings (1 roller and 1 ball) and thrust washers. Andrews recommends using their steel cam drive sprocket H11-120 and crankshaft cam drive sprocket H14-175 (must be purchased separately).. Maximum torque and horsepower at higher rpm ranges. For lighter bikes and engines with 9.5 compression ratio (or higher) and 88-95 i n. (2600-600+ rpm). Can be used with stock valve springs and tappets. , , INTAKE: Opens: 20 degree. Closes: 48 degree. Duration @ .0523: 248 degree. Duration @ .020: 283 degree. Valve Lift: .510. Lift TDC: .184. , EXHAUST: Opens: 54 degree. Closes: 18 degree. Duration @ .053: 252 degree. Duration @ .020: 287 degree. Valve Lift: .510. Lift TDC: .168.. 216350 1 on hand More Info/Options for Andrews TW50 Grind Cams 216350

$254.99 Mustang 17 in. Ultra Touring Studded Smooth Solo 75706 $254.99 Manufacturer: Mustang Dennis Kirk Part #: 455640 Mustang 17 in. Ultra Touring Studded Smooth Solo: Manufacturer part # 75706 - Ultra comfortable. Sporty enough for the FLHS and elegant enough for the FLHTC. Supported foam eliminates that "dumped forward" feeling. Seat nose extension looks like a custom panel. Solo seat baseplates are constructed of marine-grade fiberglass. Solo seats have two chrome mounting tabs that align with the stock threaded fender mount. Made in the U.S.A... , , Note: For pillion pad use 45-5641. 75706 1 on hand More Info/Options for Mustang 17 in. Ultra Touring Studded Smooth Solo 75706

$254.99 Andrews TW55 Chain Driven Grind Cam 216355 $254.99 Manufacturer: Andrews Dennis Kirk Part #: 149906 Andrews TW55 Chain Driven Grind Cam: Manufacturer part # 216355 - Andrews Products grinds its cams using a computer with cam design capabilities. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel billets and heat-treating processes are used. The power in a Harley Twin Cam engine is completely released only when superior Andrews computer-designed high-performance cams are installed. Cams come with new bearings (1 roller and 1 ball). Andrews recommends using their steel cam drive sprocket DS-199175 and crankshaft cam drive sprocket DS-199074 (must be purchased separately). , , TW55 Grind Cams Maximum torque and horsepower at higher rpm ranges (2600-6000 rpms). Designed for engines with 9.5:1 compression ratio or higher and with 88-95in.. Coil bind should be checked - Can be used with stock tappets.. 216355 1 on hand More Info/Options for Andrews TW55 Chain Driven Grind Cam 216355

$254.99 Dunlop Sportmax GP Radial Soft Rear Tire p543421 $254.99 Manufacturer: Dunlop Dennis Kirk Part #: 543421 Dunlop Sportmax GP Radial Soft Rear Tire: Manufacturer part # p543421 - Unbelievable grip with race-tire compound and track-friendly design. New profile absorbs bumps for a smoother ride and on-track handling. Maximum footprint and superior cornering. Jointless band construction. Tread matches Sportmax GP national championship-winning tire. DOT approved, recommended for track use. Made in the U.S.A.. Sidewall ID Information: DUNLOP Sportmax GP 190/55ZR-17 M/C (75W). , Dimensions, Deepest Tread Depth: 6/32 in., Balance Dot: Yes-Yellow, Directional Arrow: Yes, Speed Rating: W (V270)- Rated up to 168 mph, , Capacities and Construction, Load Capacity/Inflation Pressure: 835 lbs/ 42 psi, Load Range: B, Bias or Radial Ply: Radial, Tread Plies/Material: 2 Nylon/ 1 Aramid, Sidewall Plies/Material: 2 Nylon, DOT Approved for Road Use: Yes, Tube or Tubeless: Tubeless Only. p543421 1 on hand More Info/Options for Dunlop Sportmax GP Radial Soft Rear Tire p543421

$254.99 Wiseco Standard Piston Kit K1640 $254.99 Manufacturer: Wiseco Dennis Kirk Part #: K1640 Wiseco Standard Piston Kit: Manufacturer part # K1640 - Get low expansion at high temperatures and great operating strength from a respected name - Wiseco. All Wiseco pistons sold by Dennis Kirk are forged from a high-silicone aluminum alloy for superior strength and consistent dimension, even in high stress conditions. Available with X-rings (.062 top ring, .062 compression ring and .158 oil ring). Kits include two pistons, rings, piston pins and circlips. Components also sold separately; replacement rings (3497X) include enough rings for one piston; replacement wrist pins (S534)sold each; replacement ci