|
|
|
|
|
|
$945.99
Supertrapp Mean Mothers Superpak Performance Kit 4401534
Dennis Kirk Part #: 4401534
Supertrapp Mean Mothers Superpak Performance Kit 4401534: Manufacturer part # 898-72469 - Increase your bikes horsepower and torque. Developed on a dyno for maximum output then tested on the street to ensure performance. Includes SuperTrapp exhaust, SuperTrapp Pro air filter, SuperTrapp pre-calibrated digital fuel-management unit. Simple to install, , NOTE: You must order the model year of your ECU if it differs from the model year of your bike, , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 898-72469
1 on Hand
More Info/Options for Supertrapp Mean Mothers Superpak Performance Kit 4401534
|
|
|
|
$945.99
Supertrapp Super Meg Superpak Performance Kit 4401539
Dennis Kirk Part #: 4401539
Supertrapp Super Meg Superpak Performance Kit 4401539: Manufacturer part # 898-71455 - Increase your bikes horsepower and torque. Developed on a dyno for maximum output then tested on the street to ensure performance. Pre-calibrated digital fuel-management unit. Simple to install, , > You must order the model year of your ECU if it differs from the model year of your bike . , , Included Items: . Header pipe Muffler End cap (21) End cap discs (9) Heat sheilds clamps Muffler T-clamp (2) 5/16" Hex bolts (2) 5/16" Square nuts (2) 5/16" Lock washers Air filter Fuel control system, , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 898-71455
1 on Hand
More Info/Options for Supertrapp Super Meg Superpak Performance Kit 4401539
|
|
|
|
$945.99
Supertrapp Super Meg Superpak Performance Kit 4401537
Dennis Kirk Part #: 4401537
Supertrapp Super Meg Superpak Performance Kit 4401537: Manufacturer part # 898-71453 - Increase your bikes horsepower and torque. Developed on a dyno for maximum output then tested on the street to ensure performance. Simple to install. , , Included Items: Front and Rear Headpipes Tailpipe Twenty Deffuser Disks End Cap Pre Programmed Digital Fuel Management Unit Supertrapp Profilter Hiflo Air Filter Ten Mounting Clamps Two 5/16-18 Mounting Bolts w/Washers and Nuts Instructions. , , NOTE: You must order the model year of your ECU if it differs from the model year of your bike, , NOTE: This kit is designed to work with Delphi Injection only, mid 01 and earlier models are equipped with Magneti Marelli fuel-injection system---this will not work on these models, , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 898-71453
1 on Hand
More Info/Options for Supertrapp Super Meg Superpak Performance Kit 4401537
|
|
|
|
$945.99
Supertrapp Super Meg Superpak Performance Kit 4401535
Dennis Kirk Part #: 4401535
Supertrapp Super Meg Superpak Performance Kit 4401535: Manufacturer part # 898-71457 - Increase your bikes horsepower and torque. Developed on a dyno for maximum output then tested on the street to ensure performance. Simple to install. , , Included Items: Headpipe Muffler Air Cleaner End Cap 21 End Cap discs 6 Muffler Clamps T Clamp Chrome Muffler Bolt Clamp 2 T Bolts 7 Flat Washers Pre Programmed Digital Fuel Management Unit Support Bracket 1/4" Allen Bolt Two 5/16" Allen bolts Two 5/16" Nylock Nuts, , NOTE: You must order the model year of your ECU if it differs from the model year of your bike, , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing... 898-71457
1 on Hand
More Info/Options for Supertrapp Super Meg Superpak Performance Kit 4401535
|
|
|
|
|
|
$945.99
Supertrapp Mean Mothers Superpak Performance Kit 4401536
Dennis Kirk Part #: 4401536
Supertrapp Mean Mothers Superpak Performance Kit 4401536: Manufacturer part # 898-72470 - Increase your bikes horsepower and torque. Developed on a dyno for maximum output then tested on the street to ensure performance. Pre-calibrated digital fuel-management unit. Simple to install, , Included Items: . Two drag pipes. Mounting bracket. Fuel controller. Air filter. Four 5/16"-18 X 3/4" flange bolts. Two 3/8"-16 x 3/4" hex bolts Four 5/16" flat washers Two 3/8" lock washers Instructions, , NOTE: You must order the model year of your ECU if it differs from the model year of your bike, , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 898-72470
1 on Hand
More Info/Options for Supertrapp Mean Mothers Superpak Performance Kit 4401536
|
|
|
|
$945.99
Supertrapp Mean Mothers Superpak Performance Kit 4401532
Dennis Kirk Part #: 4401532
Supertrapp Mean Mothers Superpak Performance Kit 4401532: Manufacturer part # 898-72468 - Increase your bikes horsepower and torque. Developed on a dyno for maximum output then tested on the street to ensure performance. Pre-calibrated digital fuel-management unit. Simple to install, , NOTE: You must order the model year of your ECU if it differs from the model year of your bike, , Included Items: . (2) Exhaust pipes (2) Full length heat sheilds Support bracket Air filter Fuel control system (6) 5/16" Hex bolts (2) 5/16" Lock washers (4) 5/16" flat washers Instructions, , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 898-72468
1 on Hand
More Info/Options for Supertrapp Mean Mothers Superpak Performance Kit 4401532
|
|
|
|
$945.99
Supertrapp Super Meg Superpak Performance Kit 4401531
Dennis Kirk Part #: 4401531
Supertrapp Super Meg Superpak Performance Kit 4401531: Manufacturer part # 898-71454 - Increase your bikes horsepower and torque. Developed on a dyno for maximum output then tested on the street to ensure performance. Includes SuperTrapp exhaust, SuperTrapp Pro air filter, SuperTrapp pre-calibrated digital fuel-management unit. Simple to install, , NOTE: You must order the model year of your ECU if it differs from the model year of your bike, , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 898-71454
1 on Hand
More Info/Options for Supertrapp Super Meg Superpak Performance Kit 4401531
|
|
|
|
$945.99
Supertrapp Super Meg Superpak Performance Kit 4401533
Dennis Kirk Part #: 4401533
Supertrapp Super Meg Superpak Performance Kit 4401533: Manufacturer part # 898-71456 - Increase your bikes horsepower and torque. Developed on a dyno for maximum output then tested on the street to ensure performance. Includes SuperTrapp exhaust, SuperTrapp Pro air filter, SuperTrapp pre-calibrated digital fuel-management unit. Simple to install, , Included Items . , 1. (1) Head Pipe. , 2. (1) Muffler. , 3. (1) Air Filter. , 4. (1) Fuel Controller. , 5. (1) Black Mounting Bracket. , 6. (19) Dufusers. , 7. (1) End Cap , 8. (1) Exhaust Clamp. , 9. (6) Hose Clamps. , 10. (2) 5/16" - 18 X 1 1/4" Socket Head Bolts. , 11. (2) 5/16" - 18 X 7/8" T-Bolt. , 12. (1) 1/4" - 20 X 1/14" Socket Head Bolt. , 13. (1) 5/16" Spacer Washers. , 14. (4) 5/16" Flat Washers. , 15. (1) 1/4" Flat Washer, , NOTE: You must order the model year of your ECU if it differs from the model year of your bike, , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 898-71456
1 on Hand
More Info/Options for Supertrapp Super Meg Superpak Performance Kit 4401533
|
|
|
|
|
|
$943.99
American Wire Wheel 40-Spoke Single Disc Radial Laced Wheels 554170
Dennis Kirk Part #: 554170
American Wire Wheel 40-Spoke Single Disc Radial Laced Wheels 554170: These radial-laced wheels come with chrome-plated steel rims, billet aluminum hubs in either a 40- or 100-spoke pattern. 19 inch and 21 inch x 2.15 inch wheels feature rolled edge rims, 16 inch, 18 inch and 21 inch x 3 inch rims have standard edge rims like an OEM rim. 40-spoke wheels feature 3/8 inch diameter polished stainless spokes. Tapered-style bearings are used on the wheels for 80-99 models; OEM-style sealed bearings are used on the wheels for 00-06 models. Include bearings, seals and spacers. 16 inch and 18 inch wheels can be run tubeless; 19 inch and 21 inch wheels require inner tubes. Made in the U.S.A.. , NOTE: Item ships 3 or 4 days after the order is placed..
1 on Hand
More Info/Options for American Wire Wheel 40-Spoke Single Disc Radial Laced Wheels 554170
|
|
|
|
$943.99
Scorpion Dual Oval Slip-On Mufflers w/Carbon Fiber Muffler Sleeves 4400605
Dennis Kirk Part #: 4400605
Scorpion Dual Oval Slip-On Mufflers w/Carbon Fiber Muffler Sleeves 4400605: Manufacturer part # DI56 - High-performance mufflers that have been dyno- and track-proven to increase overall performance; very high mid-range performance boosts. Model-specific designs require no re-mapping or re-jetting. Stainless steel inner components. Space-technology sound absorption; never requires repacking and offers consistent sound. O2 Lambda sensor connectors are fitted for models that require sensors. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. NOTE: This item ships 3-4 business days after order is placed. DI56
1 on Hand
More Info/Options for Scorpion Dual Oval Slip-On Mufflers w/Carbon Fiber Muffler Sleeves 4400605
|
|
|
|
$943.99
Scorpion Carbon Fiber Oval Muffler 4402188
Dennis Kirk Part #: 4402188
Scorpion Carbon Fiber Oval Muffler 4402188: Manufacturer part # KA 79 - High-performance mufflers that have been dyno- and track-proven to increase overall performance; very high mid-range performance boosts. Model-specific designs require no re-mapping or re-jetting. Stainless steel inner components. Space-technology sound absorption; never requires repacking and offers consistent sound. O2 Lambda sensor connectors are fitted for models that require sensors. Dual Mufflers. INCLUDED ITEMS: Two slip on silencers. Two 51-55mm band clamps. Two 37-40mm band clamps. Two M8 washers. Two M8 x 40mm cap head bolts. Two M8 x 20mm cap head bolts. Two 15mm aluminum spacers. Two laser cut brackets. Two H type silencer straps. Two protective rubbers for silencer straps. Two connecting pipes. One instruction sheet. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. KA 79
Expected Soon
More Info/Options for Scorpion Carbon Fiber Oval Muffler 4402188
|
|
|
|
$943.99
Scorpion Dual Oval Slip-On Mufflers w/Carbon Fiber Muffler Sleeves 4400607
Dennis Kirk Part #: 4400607
Scorpion Dual Oval Slip-On Mufflers w/Carbon Fiber Muffler Sleeves 4400607: Manufacturer part # DI60 - High-performance mufflers that have been dyno- and track-proven to increase overall performance; very high mid-range performance boosts. Model-specific designs require no re-mapping or re-jetting. Stainless steel inner components. Space-technology sound absorption; never requires repacking and offers consistent sound. O2 Lambda sensor connectors are fitted for models that require sensors. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. NOTE: This item ships 3-4 business days after order is placed. DI60
1 on Hand
More Info/Options for Scorpion Dual Oval Slip-On Mufflers w/Carbon Fiber Muffler Sleeves 4400607
|
|
|
|
$943.99
Scorpion Carbon Fiber Oval Muffler 4402104
Dennis Kirk Part #: 4402104
Scorpion Carbon Fiber Oval Muffler 4402104: Manufacturer part # YA 81 - High-performance mufflers that have been dyno- and track-proven to increase overall performance; very high mid-range performance boosts. Model-specific designs require no re-mapping or re-jetting. Stainless steel inner components. Space-technology sound absorption; never requires repacking and offers consistent sound. O2 Lambda sensor connectors are fitted for models that require sensors. Dual Mufflers. INCLUDED ITEMS: Two slip on silencers. Two 51-55mm band clamps. Two 37-40mm band clamps. Two M8 washers. Two M8 x 40mm cap head bolts. Two M8 x 20mm cap head bolts. Two 15mm aluminum spacers. Two laser cut brackets. Two H type silencer straps. Two protective rubbers for silencer straps. Two connecting pipes. One instruction sheet. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. YA 81
1 on Hand
More Info/Options for Scorpion Carbon Fiber Oval Muffler 4402104
|
|
|
|
$943.99
Scorpion Dual Oval Slip-On Mufflers w/Carbon Fiber Muffler Sleeves 4400609
Dennis Kirk Part #: 4400609
Scorpion Dual Oval Slip-On Mufflers w/Carbon Fiber Muffler Sleeves 4400609: Manufacturer part # DI54 - High-performance mufflers that have been dyno- and track-proven to increase overall performance; very high mid-range performance boosts. Model-specific designs require no re-mapping or re-jetting. Stainless steel inner components. Space-technology sound absorption; never requires repacking and offers consistent sound. O2 Lambda sensor connectors are fitted for models that require sensors. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. NOTE: This item ships 3-4 business days after order is placed. DI54
1 on Hand
More Info/Options for Scorpion Dual Oval Slip-On Mufflers w/Carbon Fiber Muffler Sleeves 4400609
|
|
|
|
$943.99
Scorpion Carbon Fiber Oval Muffler 4400637
Dennis Kirk Part #: 4400637
Scorpion Carbon Fiber Oval Muffler 4400637: Manufacturer part # HA76 - High-performance mufflers that have been dyno- and track-proven to increase overall performance; very high mid-range performance boosts. Model-specific designs require no re-mapping or re-jetting. Stainless steel inner components. Space-technology sound absorption; never requires repacking and offers consistent sound. O2 Lambda sensor connectors are fitted for models that require sensors. Dual Mufflers. INCLUDED ITEMS: Two slip on silencers. Two 51-55mm band clamps. Two 37-40mm band clamps. Two M8 washers. Two M8 x 40mm cap head bolts. Two M8 x 20mm cap head bolts. Two 15mm aluminum spacers. Two laser cut brackets. Two H type silencer straps. Two protective rubbers for silencer straps. Two connecting pipes. One instruction sheet. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. HA76
Expected Soon
More Info/Options for Scorpion Carbon Fiber Oval Muffler 4400637
|
|
|
|
$943.99
Scorpion Carbon Fiber Oval Muffler 4401091
Dennis Kirk Part #: 4401091
Scorpion Carbon Fiber Oval Muffler 4401091: Manufacturer part # KA 73 - High-performance mufflers that have been dyno- and track-proven to increase overall performance; very high mid-range performance boosts. Model-specific designs require no re-mapping or re-jetting. Stainless steel inner components. Space-technology sound absorption; never requires repacking and offers consistent sound. O2 Lambda sensor connectors are fitted for models that require sensors. Dual Mufflers. INCLUDED ITEMS: Two slip on silencers. Two 51-55mm band clamps. Two 37-40mm band clamps. Two M8 washers. Two M8 x 40mm cap head bolts. Two M8 x 20mm cap head bolts. Two 15mm aluminum spacers. Two laser cut brackets. Two H type silencer straps. Two protective rubbers for silencer straps. Two connecting pipes. One instruction sheet. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. KA 73
1 on Hand
More Info/Options for Scorpion Carbon Fiber Oval Muffler 4401091
|
|
|
|
$943.99
Scorpion Dual Oval Slip-On Mufflers w/Carbon Fiber Muffler Sleeves 4400614
Dennis Kirk Part #: 4400614
Scorpion Dual Oval Slip-On Mufflers w/Carbon Fiber Muffler Sleeves 4400614: Manufacturer part # HA77 - High-performance mufflers that have been dyno- and track-proven to increase overall performance; very high mid-range performance boosts. Model-specific designs require no re-mapping or re-jetting. Stainless steel inner components. Space-technology sound absorption; never requires repacking and offers consistent sound. O2 Lambda sensor connectors are fitted for models that require sensors. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. NOTE: This item ships 3-4 business days after order is placed. HA77
| |
