Categories

• Helmets & Eyewear
• Apparel
• Exhaust
• Tires & Wheels
• Body & Windshield
• Rider & Machine Accessories
• Engine & Intake
• Drivetrain, Brakes & Suspension
• Controls & Handling
• Electrical & Lighting
• Chems, Lubes, Shop, Tools & Trailer

Catalogs

• Off Road
• Harley-Davidson
• Snowmobile
• Metric Bikes
• Watercraft

IMS Large Capacity Gas Tank 112222W1

$265.99 Solas Concord Impeller SRCD1018 $265.99 Manufacturer: Solas Dennis Kirk Part #: 092033 Solas Concord Impeller: Manufacturer part # SRCD1018 - Made of ultra-high-strength and corrosion-resistant stainless steel. Exclusive hub-end water seal keeps water and dirt from causing undue wear. Mirror-smooth finish and polished hub. Casting creates the impeller pitches -- other impellers rely on bending. Use the Solas cross-reference chart to find the proper impeller installation tools. Seal included. This unique impeller couples enhanced maneuverability at any speed with excellent inital hookup. Low-speed torque and all-out high speed in one variable-pitch impeller. , , HOW TO SELECT IMPELLERS , , Impeller selection used to be based on levels of engine modification. While sheer power remains a guide, other parameters have been found to be equally important. Take into account how and where the craft will be used as well as its physical characteristics.. , , 1. The more horsepower a watercraft has, the higher the impeller's pitch angle can be.. 2. If rpm tend to run too high, a higher pitch angle is recommended.. 3. Higher pitch angles are recommended for use in cold climates.. 4. Higher pitch angles are recommended for top-speed performance, but will lower acceleration.. 5. Lower pitch angles are recommended for heavier boats.. 6. Lower pitch angles are recommended for higher altitudes.. 7. Lower pitch angles are recommended for towing.. 8. Lower pitch angles are recommended for acceleration performance, but will lower top end.. , , NOTE: Recommended for stock applications. SRCD1018 1 on hand More Info/Options for Solas Concord Impeller SRCD1018

$265.99 Mac 2 1/4 in. Slash-Back Staggered Drag Pipes 0021544 $265.99 Manufacturer: Mac Dennis Kirk Part #: 4403000 Mac 2 1/4 in. Slash-Back Staggered Drag Pipes: Manufacturer part # 0021544 - Stainless steel construction with highly-polished finish. Double-walled headpipes prevent blueing. Classic drag pipe sound. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 0021544 Expected Soon More Info/Options for Mac 2 1/4 in. Slash-Back Staggered Drag Pipes 0021544

CLOSEOUT! Was: $379.99 Now: $265.99 FMF Powercore S Oval Slip-On Muffler with Blue Titanium Muffler Sleeve 044050 $265.99 Manufacturer: FMF Dennis Kirk Part #: 448835 FMF Powercore S Oval Slip-On Muffler with Blue Titanium Muffler Sleeve : Manufacturer part # 044050 - Super-lightweight with titanium canister and mid-pipe, yet sturdy where it counts with a perforated-steel square-core internal and special premium packing material. Oval-to-round canister design provides better cornering clearance and exhaust evacuation. Double-articulated stainless steel attachment springs; polished, stainless steel turndown end cap with rolled edge; and stainless steel die-cut logo. Boosts response across the rpm range with no loss of off-idle performance; provides perfect performance characteristics for the above-average, aspiring street rider. No special jetting needed. . Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 044050 2 on hand More Info/Options for FMF Powercore S Oval Slip-On Muffler with Blue Titanium Muffler Sleeve 044050

$265.99 IMS Large Capacity Gas Tank 117314W1 $265.99 Manufacturer: IMS Dennis Kirk Part #: 180115 IMS Large Capacity Gas Tank: Manufacturer part # 117314W1 - Increase riding time. Durable high-density polyethylene construction. Available in original or optional colors. Include instructions and mounting hardware. Tank decals not included. For off-road use only. , NOTE: Gas Cap Included. 117314W1 2 on hand More Info/Options for IMS Large Capacity Gas Tank 117314W1

$265.99 IMS Large Capacity Gas Tank 117326-N1 $265.99 Manufacturer: IMS Dennis Kirk Part #: 183167 IMS Large Capacity Gas Tank: Manufacturer part # 117326-N1 - Extend your ride time and range. Rugged high-density polyethylene construction. No tank decals included. For off-road use only. INCLUDED ITEMS: One fuel tank. One gas cap and seal. One 20 in. fuel line. ONe petcock gasket. One instruction sheet.. 117326-N1 1 on hand More Info/Options for IMS Large Capacity Gas Tank 117326-N1

$265.99 Braking Rotor STX01D $265.99 Manufacturer: Braking Dennis Kirk Part #: 193995 Braking Rotor: Manufacturer part # STX01D - Braking's philosophy is to use the products they make and never stop looking for ways to make them better and more efficiently for you. Unlock your bikes braking potential. Made from high-carbon content stainless steel. New materials and an innovative manufacturing process result in superior braking performance, greater longevity and less weight than cast iron or other stainless steel rotors. Used by top racers around the world. Rotors are sold each; you must order two discs for dual-disc front applications. Innovative design uses entire brake pad surface evenly while eliminating the need to drill holes for weight reduction, which results in a lighter, stronger and more efficient rotor. Able to withstand heat cycles without warping, which provides maximum stopping power while remaining perfectly flat.. STX01D 2 on hand More Info/Options for Braking Rotor STX01D

$265.99 Braking Rotor STX46D $265.99 Manufacturer: Braking Dennis Kirk Part #: 195753 Braking Rotor: Manufacturer part # STX46D - Braking's philosophy is to use the products they make and never stop looking for ways to make them better and more efficiently for you. Unlock your bikes braking potential. Made from high-carbon content stainless steel. New materials and an innovative manufacturing process result in superior braking performance, greater longevity and less weight than cast iron or other stainless steel rotors. Used by top racers around the world. Rotors are sold each; you must order two discs for dual-disc front applications. Innovative design uses entire brake pad surface evenly while eliminating the need to drill holes for weight reduction, which results in a lighter, stronger and more efficient rotor. Able to withstand heat cycles without warping, which provides maximum stopping power while remaining perfectly flat.. STX46D 1 on hand More Info/Options for Braking Rotor STX46D

$265.99 Braking Front Rotor STX79D $265.99 Manufacturer: Braking Dennis Kirk Part #: 199553 Braking Front Rotor: Manufacturer part # STX79D - State-of-the-art rotors deliver exceptional braking performance in the most demanding conditions. Brake pads contact entire surface area of rotor for maximum stopping power. Lighter than OEM by 1 lb. or more. An essential brake upgrade for race and high-performance bikes. All STREMX SuperMoto rotors are 320mm; some models require additional front caliper mounting bracket, sold separately for use with OE caliper. If using Braking SuperMoto caliper, no oversize bracket is required. Sold each. NOTE: Must buy O/S bracket to use stock caliper.. STX79D 2 on hand More Info/Options for Braking Front Rotor STX79D

$265.99 Pro Circuit T-4 4-Stroke Silencer 4QK07050 $265.99 Manufacturer: Pro Circuit Dennis Kirk Part #: 433865 Pro Circuit T-4 4-Stroke Silencer: Manufacturer part # 4QK07050 - Designed to boost output throughout the powerband. Lighter than stock. Extruded 6063 aluminum silencer resists oxidation and features long-lasting packing material. Quick access to the U.S. Forest Service-approved screen spark arrester through removable end cap tip. Silencers can be used with OEM or Pro Circuit header.. 4QK07050 1 on hand More Info/Options for Pro Circuit T-4 4-Stroke Silencer 4QK07050

$265.99 IMS ATV Large Capacity Gas Tank 122223BK1 $265.99 Manufacturer: IMS Dennis Kirk Part #: 180239 IMS ATV Large Capacity Gas Tank: Manufacturer part # 122223BK1 - Increase riding time. Durable high-density polyethylene construction. Available in original or optional colors. Include instructions and mounting hardware. Tank decals not included. For off-road use only. , NOTE: Gas Cap and Bracket Kit Included. 1993-03 TRX300EX Fourtrax/Sportrax replacement tank are not available. For utility style TRX250 Fourtrax, must get this from your Honda dealer.. 122223BK1 Expected Soon More Info/Options for IMS ATV Large Capacity Gas Tank 122223BK1

$265.99 Andrews TW26A Grind Cam 288126 $265.99 Manufacturer: Andrews Dennis Kirk Part #: H14179 Andrews TW26A Grind Cam : Manufacturer part # 288126 - Andrews Products is recognized world wide and throughout the Motor Sports community as an industry leader. Andrews Products grind its cams using computer-aided cam design capabilities. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel billets and heat treating processes are used. The power in a Harley Twin Cam engine is completely released only when superior Andrews computer-designed high- performance cams are installed. Cams come with new bearings (1 roller and 1 ball) and thrust washers. Andrews recommends using their steel cam drive sprocket H11-120 and crankshaft cam drive sprocket H14-175 (must be purchased separately).. , , TW26A Grind Cams , , Bolt-in cams for low rpm torque and two-up touring. Add more torque and horsepower at low and middle rpm range (1800-5500 rpm). Works well with either fuel-injection or carburetor. Can be used with stock valve springs and tappets. , NOTE: 00-02 model cams use a splined cam drive sprocket. These cams will fit in the 1999 Twin Cam motor, but the splined cam drive sprocket OEM #25716-99 or H11-120 must be used., , NOTE: Installer must check coil bind, valve clearance and valve-to-piston clearance., , INTAKE: Opens: 11 degree. Closes: 35 degree. Duration @ .053: 226 degree. Duration @ .020: 262 degree. Valve Lift: .490. Lift TDC: .138. , EXHAUST: Opens: 41 degree. Closes: 09 degree. Duration @ .053: 230 degree. Duration @ .020: 266 degree. Valve Lift: .490. Lift TDC: .120.. 288126 1 on hand More Info/Options for Andrews TW26A Grind Cam 288126

$265.99 IMS ATV Large Capacity Gas Tank 127311N1 $265.99 Manufacturer: IMS Dennis Kirk Part #: 180963 IMS ATV Large Capacity Gas Tank: Manufacturer part # 127311N1 - Increase riding time. Durable high-density polyethylene construction. Available in original or optional colors. Include instructions and mounting hardware. Tank decals not included. For off-road use only.. 127311N1 1 on hand More Info/Options for IMS ATV Large Capacity Gas Tank 127311N1

$265.99 C&A Pro Trail X Skies p106021 106024 $265.99 Manufacturer: C&A Pro Dennis Kirk Part #: 106024 C&A Pro Trail X Skies: Manufacturer part # p106021 - DennisKirk Part # 106024 - In a unique manufacturing process, each ski comes from a flat mold and is then bent into place, which produces permanent outward pressure. The preloaded tips absorb much of the shock from a bump and keep it from the sled. The patented C&A 100% UMHW material saddle is molded right into the ski, which makes for the most direct flex and reverse flex around. 90 degree angles on the square keel plus the flat-bottom design mean the ski floats on the snow while other skis rely on engineered-in lift. Tip flexibility is dramatically increased by the exclusive ball-and-cup loop assembly. Mounting kit must be purchased separately. Wear rods not included. , , TRAIL X SKIS , , X Edge 90 style; newly designed with great features for the recreational rider; just point and go. Rounded keels on outer edge for more control in turns and less darting. Dovetailed in the back; ski has more sled-to-snow contact. 6" wide front profile with 3 1/2" wide back profile. ISR approved handles. Total ski weight is 6.45 lbs. (including handle). Sold in pairs. , , Dimensions:. , Bottom Length: 43 1/2". , Top Length: 41 1/2". , Width Across Top: 6". , Number of Mounting Holes: 5/W first one plugged. , Mounting Hole Center Distance From:. , Front to 1st: 16 5/8". , 1st to 2nd: 1 7/8". , 2nd to 3rd: 4". , 3rd to 4th: 6 13/16". , 4th to 5th: 4 1/2". , 5th to End: 7 3/4".. p106021 1 on hand More Info/Options for C&A Pro Trail X Skies p106021 106024

$265.99 Andrews 50N Grind Cams 216850 $265.99 Manufacturer: Andrews Dennis Kirk Part #: 140047 Andrews 50N Grind Cams: Manufacturer part # 216850 - Allows you to upgrade your 99-06 Twin Cam (except 06 Dyna Glide) to the newer roller-style cam chains and replaces the spring tension cam chain adjusters with the later-style hydraulic adjusters for longer life. Cam grinds listed are designed to be used with stock lifters. They require the installation of a 2007 cam plate, oil pump, cam sprockets and chains, and both hydraulic chain adjusters. These parts are not included and must be purchased separately. A list of required components is supplied with each set of camsPerformance should be similar to earlier bikes with the same cam grinds.. , NOTE: 99-06 Twin Cam motors (except 06 Dyna Glide) cannot use the 2007 cams, as the bearing journal on the earlier motors is .875 in. in diameter and the 2007 cams are 1.000 in. in diameter. The "N" series of cams feature the .875 in. bearing journal, yet still accept the new style cam support plate., NOTE: 99-01 model motors must use the Andrews rear cam sprocket - PART #140050. 2002-2006 models must use the stock rear cam sprocket, OEM # 25728-06., NOTE: Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance., , FOR 99-06 TWIN CAM (EXCEPT 06 DYNA GLIDE), , 50N GRIND CAMS Designed for easy installation in 95 inch motors with stock heads. For lighter bikes with 9.5 to 9.8 compression ratio (2400-6000+ rpm). Can be used with stock valve springs and tappets, but valve travel must be checked (minimum .620 in.). Piston-to-valve and valve-to-valve clearance must be checked. , Specs: , Intake: , Open: 20 degrees, Close: 48 degrees, Duration @ .053: 248 degrees, Duration @.020: 283 degrees, Valve Lift: .510, Lift TDC: .184, , Exhaust: , Open: 54 degrees, Close: 18 degrees, Duration @ .053: 252 degrees, Duration @ .020: 287 degrees, Valve Lift: .510, Lift TDC: .168. 216850 1 on hand More Info/Options for Andrews 50N Grind Cams 216850

$265.99 IMS Large Capacity Gas Tank 112222W1 $265.99 Manufacturer: IMS Dennis Kirk Part #: 18837 IMS Large Capacity Gas Tank: Manufacturer part # 112222W1 - Increase riding time. Durable high-density polyethylene construction. Available in original or optional colors. Include instructions and mounting hardware. Tank decals not included. For off-road use only. , NOTE: Gas Cap Included. 112222W1 1 on hand More Info/Options for IMS Large Capacity Gas Tank 112222W1

$265.99 IMS Large Capacity Gas Tank 112234N1 $265.99 Manufacturer: IMS Dennis Kirk Part #: 182443 IMS Large Capacity Gas Tank: Manufacturer part # 112234N1 - Extend your ride time and range. Rugged high-density polyethylene construction. OEM or optional colors available. Instructions included. Mounting hardware included where noted. No tank decals included. For off-road use only.. 112234N1 1 on hand More Info/Options for IMS Large Capacity Gas Tank 112234N1

$265.99 Mac Slash-Cut Staggered 2-into-2 Exhaust Systems 0021804 $265.99 Manufacturer: Mac Dennis Kirk Part #: 4403007 Mac Slash-Cut Staggered 2-into-2 Exhaust Systems: Manufacturer part # 0021804 - Stainless steel construction with brilliantly-polished finish. Deep sound from 3 in. baffles. No blueing with 2 in. double-walled headpipes. Classic crowd-pleasing styling. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 0021804 Expected Soon More Info/Options for Mac Slash-Cut Staggered 2-into-2 Exhaust Systems 0021804

CLEARANCE! Was: $379.99 Now: $265.99 FMF Powercore S Oval Slip-On Muffler W/Gold Titanium Muffler Sleeve 044055 $265.99 Manufacturer: FMF Dennis Kirk Part #: 448840 FMF Powercore S Oval Slip-On Muffler W/Gold Titanium Muffler Sleeve: Manufacturer part # 044055 - Super-lightweight with titanium canister and mid-pipe, yet sturdy where it counts with a perforated-steel square-core internal and special premium packing material. Oval-to-round canister design provides better cornering clearance and exhaust evacuation. Double-articulated stainless steel attachment springs; polished, stainless steel turndown end cap with rolled edge; and stainless steel die-cut logo. Boosts response across the rpm range with no loss of off-idle performance; provides perfect performance characteristics for the above-average, aspiring street rider. No special jetting needed. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 044055 1 on hand More Info/Options for FMF Powercore S Oval Slip-On Muffler W/Gold Titanium Muffler Sleeve 044055

$265.99