American Wire Wheel 40-Spoke Radial Laced Wheel - 3

This site contains about 139,902 documents.

View by:

Page: 1 10 20 30 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 80 90 100 110 120 130 140 150 200 300 400 500 600 700 800 900 1,000 2,000 3,000 4,000 4,664

$977.99 Yoshimura R-77 Exhaust System 1121005 $977.99
Manufacturer: Yoshimura
Dennis Kirk Part #: 4402861
Yoshimura R-77 Exhaust System: Manufacturer part # 1121005 - Styled by Yoshimura specifically to match the new-generation Hayabusa. R-77 exhaust features a trapezoid-shaped muffler sleeve that maximizes muffler flow volume and a sharp silhouette that flows with the new Hayabusa body design. Shape of the end cap is an evolution of our R-55 exhaust. Slip-ons include dual mufflers, stainless steel tailpipes, heat shields and all necessary hardware. Full systems are a 4-into-1 design with a right-hand exit muffler; slip-ons are dual muffler design. Full system weighs approximately 13 lb., almost a 35-lb. weight savings from stock. Maximizes torque and useable power for optimum gains throughtout the entire powerband. , , NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available., , Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. 1121005
1 on hand

More Info/Options for Yoshimura R-77 Exhaust System 1121005

$976.99 Muzzys High-Performance Stainless Single Muffler Exhaust System with Oval Titanium Muffler Sleeve 1014-00064 $976.99
Manufacturer: Muzzys
Dennis Kirk Part #: 448446
Muzzys High-Performance Stainless Single Muffler Exhaust System with Oval Titanium Muffler Sleeve: Manufacturer part # 1014-00064 - High performance single muffler exhaust system. Exploit your engines full horsepower potential for the street or the track. Muzzys exhaust systems are proven performers, winning both AMA and World Superbike titles including back-to-back AMA Superbike Championships. Systems are rigorously engineered for exact fit and performance. All stainless steel pipes are hand bent and precision welded. 4-into-1 with replaceable, re-packable baffles. Carburetor re-jetting is recommended for optimum performance-see jet kits. Turn-down end cap. , , Included Items: , (1) Head pipe assembly, (1) Mid pipe tube, (1) Muffler cnister, (1) Pipe joint spring, (2) Muffler joint springs(Titanium systems only), (1) 8mm pinch bolt and nut, (8) 8x1.25mm flange nut, (1) 10x70x3.5mm flange bolt(oval mufflers only), (1) 10x1.5mm acorn nut(oval mufflers only), (1) Aluminum hanger spacer(ovals only), (2) Muzzy's stickers NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1014-00064
1 on hand

More Info/Options for Muzzys High-Performance Stainless Single Muffler Exhaust System with Oval Titanium Muffler Sleeve 1014-00064

$976.99 Muzzys High-Performance Stainless Single Muffler Exhaust System with Oval Titanium Muffler Sleeve 140611-00-OT $976.99
Manufacturer: Muzzys
Dennis Kirk Part #: 446408
Muzzys High-Performance Stainless Single Muffler Exhaust System with Oval Titanium Muffler Sleeve: Manufacturer part # 140611-00-OT - High performance single muffler exhaust system. Exploit your engines full horsepower potential for the street or the track. Muzzys exhaust systems are proven performers, winning both AMA and World Superbike titles including back-to-back AMA Superbike Championships. Systems are rigorously engineered for exact fit and performance. All stainless steel pipes are hand bent and precision welded. 4-into-1 exhaust with replaceable, re-packable baffles. Carburetor re-jetting is recommended for optimum performance-see jet kits. Turn-down end cap. , , NOTE: Stainless/Aluminum system is pictured. , , Included Items: , (1) Head pipe assembley, (1) Mid pipe tube, (1) Muffler canister, (1) Pipe joint spring, (1) 6mm pinch blot and nut, (2) Muzzy's stickers, (1) Instructions and packing list, (1) Warrenty statement, , NOTE: , Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product., , NOTE: , Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 140611-00-OT
1 on hand

More Info/Options for Muzzys High-Performance Stainless Single Muffler Exhaust System with Oval Titanium Muffler Sleeve 140611-00-OT

$976.99 Muzzys High-Performance Stainless Steel Slip-On Dual Mufflers With Oval Titanium Canister 1016-00078 $976.99
Manufacturer: Muzzys
Dennis Kirk Part #: 4401300
Muzzys High-Performance Stainless Steel Slip-On Dual Mufflers With Oval Titanium Canister: Manufacturer part # 1016-00078 - Muzzys offers a slip-on muffler that utilizes the original headpipes. You get the advantages of lighter weight, more aggressive exhaust note and increased horsepower after a very simple installation. All slip-ons include two mufflers if the original system has two -- order quantity one for a set. Dual muffler. Stainless steel inlet pipe Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1016-00078
1 on hand

More Info/Options for Muzzys High-Performance Stainless Steel Slip-On Dual Mufflers With Oval Titanium Canister 1016-00078

$976.99 Muzzys High-Performance Single Muffler Exhaust System with Polished Megaphon Style Aluminum Muffler Sleeve 1017-00074 $976.99
Manufacturer: Muzzys
Dennis Kirk Part #: 4400839
Muzzys High-Performance Single Muffler Exhaust System with Polished Megaphon Style Aluminum Muffler Sleeve: Manufacturer part # 1017-00074 - High performance single muffler exhaust system. Exploit your engines full horsepower potential for the street or the track. Muzzys exhaust systems are proven performers, winning both AMA and World Superbike titles including back-to-back AMA Superbike Championships. Systems are rigorously engineered for exact fit and performance. All stainless steel pipes are hand bent and precision welded. With replaceable, re-packable baffles. Carburetor re-jetting is recommended for optimum performance-see jet kits. Megaphone style muffler Note: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product., , Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1017-00074
2 on hand

More Info/Options for Muzzys High-Performance Single Muffler Exhaust System with Polished Megaphon Style Aluminum Muffler Sleeve 1017-00074

$976.99 Muzzys High-Performance Stainless Single Muffler Exhaust System with Oval Titanium Muffler Sleeve 140905-00-OT $976.99
Manufacturer: Muzzys
Dennis Kirk Part #: 446414
Muzzys High-Performance Stainless Single Muffler Exhaust System with Oval Titanium Muffler Sleeve: Manufacturer part # 140905-00-OT - High performance single muffler exhaust system. Exploit your engines full horsepower potential for the street or the track. Muzzys exhaust systems are proven performers, winning both AMA and World Superbike titles including back-to-back AMA Superbike Championships. Systems are rigorously engineered for exact fit and performance. All stainless steel pipes are hand bent and precision welded. 4-into-1 exhaust with replaceable, re-packable baffles. Carburetor re-jetting is recommended for optimum performance-see jet kits. Turn-down end cap. , , NOTE: Stainless/Aluminum system is pictured. , , Included Items: , (1) Head pipe assembly, (1) Mid pipe, (1)Muffler Assembly, (1) Mid pipe joint spring, (1) Muffler Pinch bolt, (1) Instruction sheet, (2) Muzzy's sickers, (1) Warrenty statement, , NOTE: , Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product., , NOTE: , Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 140905-00-OT
1 on hand

More Info/Options for Muzzys High-Performance Stainless Single Muffler Exhaust System with Oval Titanium Muffler Sleeve 140905-00-OT

$975.95 Drag Specialties Custom 120-Spoke Laced Wheel Assembly 02030185 $975.95
Manufacturer: Drag Specialties
Dennis Kirk Part #: 552279
Drag Specialties Custom 120-Spoke Laced Wheel Assembly: Manufacturer part # 02030185 - High-quality chromed wheel assemblies made in the U.S.A.. Billet chromed custom aluminum hubs. Polished stainless steel spokes with custom smooth nipples. Bearings, seals and center spacer included, but not installed, so you can set the bearing end play to your specifications and choose your wheel-bearing grease. Trued to less than .005" runout. DOT approved. All wheels use a center metal valve stem. , , NOTE: This item ships 3-4 business days after order is placed. 02030185
1 on hand

More Info/Options for Drag Specialties Custom 120-Spoke Laced Wheel Assembly 02030185

$973.99 American Wire Wheel 80-Spoke Radial Laced Wheel p554491 554494 $973.99
Manufacturer: American Wire Wheel
Dennis Kirk Part #: 554494
American Wire Wheel 80-Spoke Radial Laced Wheel: Manufacturer part # p554491 - DennisKirk Part # 554494 - These radial-laced wheels come with chrome-plated steel rims, billet aluminum hubs in either a 40- or 100-spoke pattern. 19" and 21" x 2.15" wheels feature rolled edge rims, 16", 18" and 21" x 3" rims have standard edge rims like an OEM rim. 40-spoke wheels feature 3/8" diameter chrome spokes. Tapered-style bearings are used on the wheels for 80-99 models; OEM-style sealed bearings are used on the wheels for 00-06 models. Include bearings, seals and spacers. 16"' and 18" wheels can be run tubeless; 19" and 21" wheels require inner tubes. Made in the U.S.A.. , NOTE: Item ships 3 or 4 days after the order is placed.. p554491
1 on hand

More Info/Options for American Wire Wheel 80-Spoke Radial Laced Wheel p554491 554494

$973.99 American Wire Wheel 80-Spoke Dual Disc Radial Laced Wheel p554474 554478 $973.99
Manufacturer: American Wire Wheel
Dennis Kirk Part #: 554478
American Wire Wheel 80-Spoke Dual Disc Radial Laced Wheel: Manufacturer part # p554474 - DennisKirk Part # 554478 - These radial-laced wheels come with chrome-plated steel rims, billet aluminum hubs in either a 40- or 100-spoke pattern. 19" and 21" x 2.15" wheels feature rolled edge rims, 16", 18" and 21" x 3" rims have standard edge rims like an OEM rim. 40-spoke wheels feature 3/8" diameter chrome spokes. Tapered-style bearings are used on the wheels for 80-99 models; OEM-style sealed bearings are used on the wheels for 00-06 models. Include bearings, seals and spacers. 16"' and 18" wheels can be run tubeless; 19" and 21" wheels require inner tubes. Made in the U.S.A.. , NOTE: Item ships 3 or 4 days after the order is placed.. p554474
1 on hand

More Info/Options for American Wire Wheel 80-Spoke Dual Disc Radial Laced Wheel p554474 554478

$973.99 Kerker K-Series 4-2-1 Chrome w/Aluminum Canister 12841200 $973.99
Manufacturer: Kerker
Dennis Kirk Part #: 44248
Kerker K-Series 4-2-1 Chrome w/Aluminum Canister: Manufacturer part # 12841200 - Features high quality chrome and the K-2-style end cap. K-Series advantages include up to 12 percent increase in horsepower, 10 lb. to 25 lb. weight savings and improved corner clearance. Retains oil filter access. 4-into-2-into-1. Requires removal of centerstand mounting tabs, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 12841200
1 on hand

More Info/Options for Kerker K-Series 4-2-1 Chrome w/Aluminum Canister 12841200

$973.99 American Wire Wheel 80-Spoke Radial Laced Wheel p554472 554476 $973.99
Manufacturer: American Wire Wheel
Dennis Kirk Part #: 554476
American Wire Wheel 80-Spoke Radial Laced Wheel: Manufacturer part # p554472 - DennisKirk Part # 554476 - These radial-laced wheels come with chrome-plated steel rims, billet aluminum hubs in either a 40- or 100-spoke pattern. 19" and 21" x 2.15" wheels feature rolled edge rims, 16", 18" and 21" x 3" rims have standard edge rims like an OEM rim. 40-spoke wheels feature 3/8" diameter chrome spokes. Tapered-style bearings are used on the wheels for 80-99 models; OEM-style sealed bearings are used on the wheels for 00-06 models. Include bearings, seals and spacers. 16"' and 18" wheels can be run tubeless; 19" and 21" wheels require inner tubes. Made in the U.S.A.. , NOTE: Item ships 3 or 4 days after the order is placed.. p554472
1 on hand

More Info/Options for American Wire Wheel 80-Spoke Radial Laced Wheel p554472 554476

$973.99 American Wire Wheel 80-Spoke Radial Laced Wheel p554472 554477 $973.99
Manufacturer: American Wire Wheel
Dennis Kirk Part #: 554477
American Wire Wheel 80-Spoke Radial Laced Wheel: Manufacturer part # p554472 - DennisKirk Part # 554477 - These radial-laced wheels come with chrome-plated steel rims, billet aluminum hubs in either a 40- or 100-spoke pattern. 19" and 21" x 2.15" wheels feature rolled edge rims, 16", 18" and 21" x 3" rims have standard edge rims like an OEM rim. 40-spoke wheels feature 3/8" diameter chrome spokes. Tapered-style bearings are used on the wheels for 80-99 models; OEM-style sealed bearings are used on the wheels for 00-06 models. Include bearings, seals and spacers. 16"' and 18" wheels can be run tubeless; 19" and 21" wheels require inner tubes. Made in the U.S.A.. , NOTE: Item ships 3 or 4 days after the order is placed.. p554472
1 on hand

More Info/Options for American Wire Wheel 80-Spoke Radial Laced Wheel p554472 554477

$973.99 American Wire Wheel 80-Spoke Radial Laced Wheel p554472 554479 $973.99
Manufacturer: American Wire Wheel
Dennis Kirk Part #: 554479
American Wire Wheel 80-Spoke Radial Laced Wheel: Manufacturer part # p554472 - DennisKirk Part # 554479 - These radial-laced wheels come with chrome-plated steel rims, billet aluminum hubs in either a 40- or 100-spoke pattern. 19" and 21" x 2.15" wheels feature rolled edge rims, 16", 18" and 21" x 3" rims have standard edge rims like an OEM rim. 40-spoke wheels feature 3/8" diameter chrome spokes. Tapered-style bearings are used on the wheels for 80-99 models; OEM-style sealed bearings are used on the wheels for 00-06 models. Include bearings, seals and spacers. 16"' and 18" wheels can be run tubeless; 19" and 21" wheels require inner tubes. Made in the U.S.A.. , NOTE: Item ships 3 or 4 days after the order is placed.. p554472
1 on hand

More Info/Options for American Wire Wheel 80-Spoke Radial Laced Wheel p554472 554479

$973.99 American Wire Wheel 80-Spoke Wheel Assembly CLASSIC80SPOKE $973.99
Manufacturer: American Wire Wheel
Dennis Kirk Part #: 551569
American Wire Wheel 80-Spoke Wheel Assembly: Manufacturer part # CLASSIC80SPOKE - 87 years experience building custom wire spoke-laced wheels-No one has been doing it longer. CNC milled hubs and CNC dimpled rims for precise fit, strength and trueness. All 16 in. and 18 in wheels are factory sealed to run tubeless tires. All tubeless designed wheels are complete with valve stems. The 80 spoke wheels use oversized 203 gauge wire swaged to 192 in a cross laced pattern. OEM spec chrome plating, all in-house facilities. Chrome plated steel rims. Chrome plated or polished stainless steel spokes and nipples. Chrome