Dynojet Power Commander III USB 328411

This site contains about 140,285 documents.

View by:

Page: 1 100 200 300 310 320 330 340 350 360 370 380 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 430 440 450 460 470 480 490 500 600 700 800 900 1,000 1,100 1,200 1,300 1,400 2,000 3,000 4,000 4,677

$334.99 Maier Custom Racing ATV Front Fender 18963 617039 $334.99
Manufacturer: Maier
Dennis Kirk Part #: 617039
Maier Custom Racing ATV Front Fender: Manufacturer part # 18963 - DennisKirk Part # 617039 - Constructed of high-density polyethylene for unsurpassed strength. Designed to fit each model precisely at a fraction of the OEM cost. Racing fenders are aerodynamically designed for less wind resistance and better top speed. Use stock mounting hardware. NOTE: Eliminate need for separate tank and radiator covers INCLUDED ITEMS: One fender. Two mounting brackets. Two 6mm x 3/4 in. screws. Two 6mm x 3/4 in. hex bolts. Four 6mm nylock nuts. Six 6mm flat washers. One instruction sheet.. 18963
1 on hand

More Info/Options for Maier Custom Racing ATV Front Fender 18963 617039

$334.99 Maier Custom ATV Front Fender 18964 $334.99
Manufacturer: Maier
Dennis Kirk Part #: 617043
Maier Custom ATV Front Fender: Manufacturer part # 18964 - Constructed of high-density polyethylene for unsurpassed strength. Designed to fit each model precisely at a fraction of the OEM cost. Use stock mounting hardware. NOTE: Eliminate need for separate tank and radiator covers.. 18964
2 on hand

More Info/Options for Maier Custom ATV Front Fender 18964

$334.99 Maier Custom ATV Front Fender 18964 617041 $334.99
Manufacturer: Maier
Dennis Kirk Part #: 617041
Maier Custom ATV Front Fender: Manufacturer part # 18964 - DennisKirk Part # 617041 - Constructed of high-density polyethylene for unsurpassed strength. Designed to fit each model precisely at a fraction of the OEM cost. Use stock mounting hardware. NOTE: Eliminate need for separate tank and radiator covers. Meier Fighting Red matches Honda XR/CR/CRF and TRX90/250EX/400EX 00-05. Oversize this can only be shipped by UPS. 18964
3 on hand

More Info/Options for Maier Custom ATV Front Fender 18964 617041

$334.99 Maier Custom ATV Front Fender 18964 617042 $334.99
Manufacturer: Maier
Dennis Kirk Part #: 617042
Maier Custom ATV Front Fender: Manufacturer part # 18964 - DennisKirk Part # 617042 - Constructed of high-density polyethylene for unsurpassed strength. Designed to fit each model precisely at a fraction of the OEM cost. Use stock mounting hardware. NOTE: Eliminate need for separate tank and radiator covers. 18964
1 on hand

More Info/Options for Maier Custom ATV Front Fender 18964 617042

$334.99 GMA Engineering Billet aluminum front brake caliper, each GMA400F $334.99
Manufacturer: GMA Engineering
Dennis Kirk Part #: H191690
GMA Engineering Billet aluminum front brake caliper, each: Manufacturer part # GMA400F - GMA's mission is to provide high performance, high quality products, priced competitively for the ultimate customer satisfaction of the Harley-Davidson motorcyle rider and enthusiast. Clear anodized billet aluminum construction with fin design. Chrome finish available in some styles. Calipers available in 2- or 4-piston designs for various H-D models (including rigid frames). 5/8" bore master cylinder required for all GMA single-disc applications using a 2- or 4-piston caliper. Factory 11/16" bore (1984 & later) or GMA 3/4" handlebar master cylinder required for all front dual-disc applications using a 2- or 4-piston caliper. Brake pads included. Made in the U.S.A.. , NOTE: The old style Wagner and Kelsey-Hayes (die cast aluminum OEM) on rear applications have a 3/4" bore master cylinder and WILL NOT WORK CORRECTLY., NOTE: Not recommended for use with imported stainless steel rotors., NOTE: When installing new calipers, always check spoke-to-caliper clearance.. GMA400F
1 on hand

More Info/Options for GMA Engineering Billet aluminum front brake caliper, each GMA400F

$334.99 Cobra 2 in. Drag Pipes 6200 $334.99
Manufacturer: Cobra
Dennis Kirk Part #: 448280
Cobra 2 in. Drag Pipes: Manufacturer part # 6200 - Full-length, 215 degree wraparound heat shields make pipes and mufflers appear to be 2 in. dia. (pipes are actually 1 3/4 in.). All components (head pipes, mufflers and heat shields) are triple chrome plated. Radial slash-cut mufflers. Take out a single screw and the baffles can be removed. Trouble-free installation -- all necessary mounting hardware and instructions are included. Made in the U.S.A.. , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , NOTE: For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 6200
1 on hand

More Info/Options for Cobra 2 in. Drag Pipes 6200

$334.99 FMF Factory 4.1 Blue Anodized Titanium Muffler w/Stainless Midpipe 045080 $334.99
Manufacturer: FMF
Dennis Kirk Part #: 432101
FMF Factory 4.1 Blue Anodized Titanium Muffler w/Stainless Midpipe: Manufacturer part # 045080 - The lightest system available. Boosts low-mid torque and offers a broader powerband with more over-rev. Patented chamber core for optimum performance. Engineered for compactness and centralized mass for improved handling. Exclusive mounting design. Easily serviced for re-packing. All systems and slip-ons have a titanium or carbon fiber muffler with titanium end cap; Titanium mufflers available with either natural or blue anodized finish. Full systems are complete with titanium PowerBomb header and midpipe, unless noted. Slip-on mufflers are availabe with a titanium or stainless steel midpipe. Customizable with performance tuning inserts and spark arrestor module. Meets AMA sound requirements on most models. Instructions included. 045080
1 on hand

More Info/Options for FMF Factory 4.1 Blue Anodized Titanium Muffler w/Stainless Midpipe 045080

$334.99 GMA Engineering Millenium Series 4-Piston Caliper GMA400M $334.99
Manufacturer: GMA Engineering
Dennis Kirk Part #: H19299
GMA Engineering Millenium Series 4-Piston Caliper: Manufacturer part # GMA400M - Made of high-quality 6061 T-6S aluminum. Clear coated Anodized finish and smooth design. Made in the U.S.A.. NOTE: Photo shows chrome finish not anodized finish. GMA400M
2 on hand

More Info/Options for GMA Engineering Millenium Series 4-Piston Caliper GMA400M

$334.95 Z1R Dart Jacket LJ45133XRED $334.95
Manufacturer: Z1R
Dennis Kirk Part #: 3410090XXXL
Z1R Dart Jacket: Manufacturer part # LJ45133XRED - All year, all-weather jacket. Durable 1.2-1.4mm premium cowhide construction with nylon insets. Fully insulated, removable liner is ideal for cold weather riding; for hot days, nylon panels zip-off to reveal mesh inserts that run from your torso down your arms. Micro-perf leather panels for added breathability. Shoulders, elbows and back area have removable CE armor. Pre-bent arms and accordion action panels allow for a comfortable riding position. Adjustable waistband and sleeves. Zippered cuffs. Interior zippered pocket.. LJ45133XRED
2 on hand

More Info/Options for Z1R Dart Jacket LJ45133XRED

$334.95 Z1R Dart Jacket LJ45133XYEL $334.95
Manufacturer: Z1R
Dennis Kirk Part #: 3410092XXXL
Z1R Dart Jacket: Manufacturer part # LJ45133XYEL - All year, all-weather jacket. Durable 1.2-1.4mm premium cowhide construction with nylon insets. Fully insulated, removable liner is ideal for cold weather riding; for hot days, nylon panels zip-off to reveal mesh inserts that run from your torso down your arms. Micro-perf leather panels for added breathability. Shoulders, elbows and back area have removable CE armor. Pre-bent arms and accordion action panels allow for a comfortable riding position. Adjustable waistband and sleeves. Zippered cuffs. Interior zippered pocket.. LJ45133XYEL
2 on hand

More Info/Options for Z1R Dart Jacket LJ45133XYEL

$334.95 Python3 Slash-Cut Exhaust System 41420 $334.95
Manufacturer: Python3
Dennis Kirk Part #: H25609
Python3 Slash-Cut Exhaust System: Manufacturer part # 41420 - The Python 3 by Drag Specialties is a completely re-engineered, quantum-leap forward in exhaust technology, function and style. Engineered to significantly crank up the output on stroker and other modified engines. Independent Dyno tests on an 89 in. modified Big Twin show an impressive 5% peak horsepower gain over even a Python II system. 1 3/4 in. equal-length header pipes flow into big 2 1/2 in. muffler bodies for maximum performance. Non-removable, free-flowing, heavy duty, fiberglass-wrapped baffles are engineered to give you that Big Block Sound reminiscent of years past. Deep, double-nickel chrome finish, polished to perfection on all sides, wraps around the entire system. Snakeskins heat shields let you dress up your system even further (sold separately - part no. H25-610). Made specifically for each model, Python 3 systems utilize OEM mounting flanges; all other necessary mounting hardware is included, except where noted. Designed, tested and manufactured in the U.S.A., , NOTE: 2003-05 Dyna models require exhaust flange kit Part No. H25-1325, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 41420
1 on hand

More Info/Options for Python3 Slash-Cut Exhaust System 41420

$334.95 Python3 Tapered Exhaust System 41395 $334.95
Manufacturer: Python3
Dennis Kirk Part #: H25608
Python3 Tapered Exhaust System: Manufacturer part # 41395 - The Python 3 by Drag Specialties is a completely re-engineered, quantum-leap forward in exhaust technology, function and style. Engineered to significantly crank up the output on stroker and other modified engines. Independent Dyno tests on an 89 in. modified Big Twin show an impressive 5% peak horsepower gain over even a Python II system. 1 3/4 in. equal-length header pipes flow into big 2 1/2 in. muffler bodies for maximum performance. Non-removable, free-flowing, heavy duty, fiberglass-wrapped baffles are engineered to give you that Big Block Sound reminiscent of years past. Deep, double-nickel chrome finish, polished to perfection on all sides, wraps around the entire system. Snakeskins heat shields let you dress up your system even further (sold separately - part no. H25-610). Made specifically for each model, Python 3 systems utilize OEM mounting flanges; all other necessary mounting hardware is included, except where noted. Designed, tested and manufactured in the U.S.A.., , NOTE: 2003-05 Dyna models require exhaust flange kit Part No. H25-1325, , NOTES: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing, , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 41395
Expected Soon

More Info/Options for Python3 Tapered Exhaust System 41395

$334.95 Python3 Tapered Exhaust System 41280 $334.95
Manufacturer: Python3
Dennis Kirk Part #: H25600
Python3 Tapered Exhaust System: Manufacturer part # 41280 - The Python 3 by Drag Specialties is a completely re-engineered, quantum-leap forward in exhaust technology, function and style. Engineered to significantly crank up the output on stroker and other modified engines. Independent Dyno tests on an 89 in. modified Big Twin show an impressive 5% peak horsepower gain over even a Python II system. 1 3/4 in. equal-length header pipes flow into big 2 1/2 in. muffler bodies for maximum performance. Non-removable, free-flowing, heavy duty, fiberglass-wrapped baffles are engineered to give you that Big Block Sound reminiscent of years past. Deep, double-nickel chrome finish, polished to perfection on all sides, wraps around the entire system. Snakeskins heat shields let you dress up your system even further (sold separately - part no. H25-604). Made specifically for each model, Python 3 systems utilize OEM mounting flanges; all other necessary mounting hardware is included, except where noted. Designed, tested and manufactured in the U.S.A.. This system is a low-low system. , NOTE: , 00-06 models require H27-202 (chrome) or H27-203 (black) muffler supports, , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration., , Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 41280
1 on hand

More Info/Options for Python3 Tapered Exhaust System 41280

$334.95 Python3 Slash-Cut Exhaust System 41415 $334.95
Manufacturer: Python3
Dennis Kirk Part #: H25601
Python3 Slash-Cut Exhaust System: Manufacturer part # 41415 - The Python 3 by Drag Specialties is a completely re-engineered, quantum-leap forward in exhaust technology, function and style. Engineered to significantly crank up the output on stroker and other modified engines. Independent Dyno tests on an 89 in. modified Big Twin show an impressive 5% peak horsepower gain over even a Python II system. 1 3/4 in. equal-length header pipes flow into big 2 1/2 in. muffler bodies for maximum performance. Non-removable, free-flowing, heavy duty, fiberglass-wrapped baffles are engineered to give you that Big Block Sound reminiscent of years past. Deep, double-nickel chrome finish, polished to perfection on all sides, wraps around the entire system. Snakeskins heat shields let you dress up your system even further (sold separately - part no. H25-604). Made specifically for each model, Python 3 systems utilize OEM mounting flanges; all other necessary mounting hardware is included, except where noted. Designed, tested and manufactured in the U.S.A.. Pictures as being a high-low system, but is a low-low system. , , NOTE: 2000-2006 models require H27-202 chrome or H27-203 black muffler support, , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration., , Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing, , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 41415
1 on hand

More Info/Options for Python3 Slash-Cut Exhaust System 41415

$334.95 Python3 Slash-Cut Exhaust System 41410 $334.95
Manufacturer: Python3
Dennis Kirk Part #: H25612
Python3 Slash-Cut Exhaust System: Manufacturer part # 41410 - The Python 3 by Drag Specialties is a completely re-engineered, quantum-leap forward in exhaust technology, function and style. Engineered to significantly crank up the output on stroker and other modified engines. Independent Dyno tests on an 89 in. modified Big Twin show an impressive 5% peak horsepower gain over even a Python II system. 1 3/4 in. equal-length header pipes flow into big 2 1/2 in. muffler bodies for maximum performance. Non-removable, free-flowing, heavy duty, fiberglass-wrapped baffles are engineered to give you that Big Block Sound reminiscent of years past. Deep, double-nickel chrome finish, polished to perfection on all sides, wraps around the entire system. Snakeskins heat shields let you dress up your system even further (sold separately - part no. H25-613). Made specifically for each model, Python 3 systems utilize OEM mounting flanges; all other necessary mounting hardware is included, except where noted. Designed, tested and manufactured in the U.S.A.. , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See lubrication product pages in the Chems and Lubes section for products that will help prevent or remove blueing. 41410