|
|
|
|
$322.99
Saddlemen Tattoo Profiler Seat 453844
Dennis Kirk Part #: 453844
Saddlemen Tattoo Profiler Seat 453844: Manufacturer part # S05100512 - Flame-stitch design and 3-D effect give these leather seats a custom look. Excellent comfort from a seat with narrow styling, a thin profile and low ride height. SaddleGel pad in drivers portion for even weight distribution and better comfort on long trips. UV and weather resistant. Made in the U.S.A.. DRIVER SEAT: Length: 18 1/4 in.. Width: 14 in.. BACKREST HEIGHT: Length: 6 in.. Width: Not Available. PASSENGER SEAT: Length: 12 3/4 in.. Width: 7 in.. Overall Length: 31 in.. S05100512
1 on Hand
More Info/Options for Saddlemen Tattoo Profiler Seat 453844
|
|
|
|
$322.99
Diamond Engineering The Groove Stainless Steel Custom Transformation Kit 272151
Dennis Kirk Part #: 272151
Diamond Engineering The Groove Stainless Steel Custom Transformation Kit 272151: Kits include a dozen groups of polished fasteners so you can give your bike a custom look without having to completely disassemble it. Kits include fasteners for the engine, transmission and the most visible areas of the motorcycle. Fasteners included in kits for primary, inspections and inner primary; cam and points; oil pump or oil line cover, filter mount and sensors (Dyna and Twin Cam FLH) or oil filter plugs and sensors (Twin Cam Softail); lifter blocks; rocker box; coil and circuit breaker covers (Dyna); transmission side cover; oil filler (FLH models); transmission top cover; handlebar clamp, switch housings and master cylinder; front fender or front fender trim and fuel tank (FLH models); rear fender rail or swingarm pivot blocks and rear floorboard brackets (FLH models); and side covers (FXR)..
1 on Hand
More Info/Options for Diamond Engineering The Groove Stainless Steel Custom Transformation Kit 272151
|
|
|
|
$322.99
Comet 108-EXP High Performance Uncalibrated Clutch 382931
Dennis Kirk Part #: 382931
Comet 108-EXP High Performance Uncalibrated Clutch 382931: Manufacturer part # 219903A - Comets 108-EXP clutch, designed for more power, more endurance, more of everything you need for speed. 108-EXP clutches offer maximum tuneability and can be easily calibrated by changing the cam arms and spring to more efficiently use your engines horsepower. Tried, tested and built to handle high horsepower engines. Newest design features wide rollers for increased bearing area, improved cover bolts and movable sheave bearings, a recessed mounting bolt and a redesigned fixed face for increased durability. Uses same basic tuning parts as the 102-C and 108-C clutches. All clutches are uncalibrated and sold without cam arms and spring. 108-EXP clutches include the mounting bolt and washer, cam arm pivot bolts, nylon washers and lock nuts, instructions and the free Comet Tuning Manual. , For Ski Doo manual start models with 1 3/8 in. wide drive belts only. Positive depth numbers indicated the taper starts the specified distance into the casting.. 219903A
4 on Hand
More Info/Options for Comet 108-EXP High Performance Uncalibrated Clutch 382931
|
|
|
|
$322.99
Pro Armor Racing Nerf Bars w/Heel Guards 516098
Dennis Kirk Part #: 516098
Pro Armor Racing Nerf Bars w/Heel Guards 516098: Mounting design is much stronger than standard because it uses no U bolts. Experience added safety -- plus better looks for your ATV -- with full coverage ahead of the front wheel. Thick-wall 1 1/4 in. aluminum tubing construction. Maximum-strength Tig welding. Heavy-duty triple hook net mounts and nylon netting. Race pegs with heel guards . INCLUDED ITEMS: One nerf bar/heel guard (left). One nerf bar/heel guard (right). Two bolts M8 x 1.25 x 50mm long. Eight bolts M8 x 1.25 x 65mm long. Ten M8 x 1.25 nylock nuts. Twenty M8 flat washers. Two peg spacers with serrated teeth. One steel peg mount weldment assembly (Left rear nerf support). One steel peg mount weldment assembly (right rear nerf support). Two foot pegs serrated steel foot peg. Four web clips attach web to frame tube. Two bots M10 x 1.25 x 70mm long (Front nerf bar to A-Arm support). Two web sets (1 left web) & (1 right web). Two M10 washers (front nerf bar to A-Arm support. Four flange bolts M10 x 1.25 x 45mm long, footpeg weldment to frame..
1 on Hand
More Info/Options for Pro Armor Racing Nerf Bars w/Heel Guards 516098
|
|
|
|
$322.99
Supertrapp MudSlinger Exhaust System 433628
Dennis Kirk Part #: 433628
Supertrapp MudSlinger Exhaust System 433628: ATV riders will be thrilled with SuperTrapp's introduction of the new MudSlinger to its production line. This rugged exhaust, with its polished stainless steel outer body has an aluminum end cap that not only looks cool, but will hold up to th abuse that aggressive ATV riders dish out. The mechanical core offers dramatic increase in torque and throttle response. Equipped with removable USFS Approved Spark Arrestor, the MudSlinger has an aggressive tone, yet is 96db and forestry legal. It utilizes Pillow Pack packing for the ultimate in durability along with superior silencing and an optional deep water fording kit available (part number 433740). All models come complete with clear instructions and all hardware which eliminate guesswork by lending bolt on power right out of the box..
1 on Hand
More Info/Options for Supertrapp MudSlinger Exhaust System 433628
|
|
|
|
$322.99
Vance & Hines Cruzers Exhaust System 445201
Dennis Kirk Part #: 445201
Vance & Hines Cruzers Exhaust System 445201: Manufacturer part # 31403 - Designed and manufactured in the U.S.A., Vance & Hines systems lead the industry in high-performance technology Same great features as the Classics II line but at a more affordable price. All are 3 in. diameter slash-cut end style with chrome plated, custom 220º plasma-arc cut full-length heat shields to hide any possible blueing. Removable, re-packable baffles wrapped in fiberglass. Come complete with all necessary mounting hardware and instructions. Carburetor re-jetting or a Vance & Hines Power Commander may be necessary for optimum performance, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 31403
Expected Soon
More Info/Options for Vance & Hines Cruzers Exhaust System 445201
|
|
|
|
$322.99
Saddlemen Tattoo Profiler Seat 453851
Dennis Kirk Part #: 453851
Saddlemen Tattoo Profiler Seat 453851: Manufacturer part # S05060512 - Flame-stitch design and 3-D effect give these leather seats a custom look. Excellent comfort from a seat with narrow styling, a thin profile and low ride height. SaddleGel pad in drivers portion for even weight distribution and better comfort on long trips. UV and weather resistant. Made in the U.S.A.. DRIVER SEAT: Length: 18 1/4 in.. Width: 14 in.. BACKREST HEIGHT: Length: 6 in.. Width: Not Available. PASSENGER SEAT: Length: 12 3/4 in.. Width: 7 in.. Overall Length: 31 in.. S05060512
1 on Hand
More Info/Options for Saddlemen Tattoo Profiler Seat 453851
|
|
|
|
$322.99
Works Shocks Gasser Shock Absorber 581908
Dennis Kirk Part #: 581908
Works Shocks Gasser Shock Absorber 581908: Manufacturer part # GASSER - In 1973, Works Performance Products began producing unique off-road shocks, with a revolutionary damping system. At the same time, Works Performance started a tradition of winning championships. This same winning tradition goes into every Works Performance shock whether it's for off-road motorcycles, ATVs, high-performance street bikes or custom cruisers Whether you are a motocrosser or weekend warrior, Works Performance shocks deliver maximum performance and durability. Unlike mass-produced shocks, Works builds shocks for specific types of riding and rider weight to deliver the best possible handling. In virtually all cases, shocks are designed to produce the maximum wheel travel available with the stock suspension design. All shocks are designed for typical use on the vehicle specified, including competition; for lighter weight riders who are very aggressive we recommend the shocks rated for heavier riders. Backed by a manufacturers 30 day performance guarantee and a 90 day warranty against any failure due to workmanship or materials. , High-pressure gas dampers feature a 1/2 in. hard-chromed steel shaft and a 1 3/8 in. diameter piston with 6-stage damping. Durable welded steel body with threaded pre-load adjustment. Gasser for Honda XR80/100R includes a hose-mounted remote reservoir. , For 65-80lb riders. , Note: This item ships in 3-4 days after the order is placed.. GASSER
1 on Hand
More Info/Options for Works Shocks Gasser Shock Absorber 581908
|
|
|
|
$322.99
Comet 108-EXP High Performance Uncalibrated Clutch 382663
Dennis Kirk Part #: 382663
Comet 108-EXP High Performance Uncalibrated Clutch 382663: Manufacturer part # 219508A - Comets 108-EXP clutch, designed for more power, more endurance, more of everything you need for speed. 108-EXP clutches offer maximum tuneability and can be easily calibrated by changing the cam arms and spring to more efficiently use your engines horsepower. Tried, tested and built to handle high horsepower engines. Newest design features wide rollers for increased bearing area, improved cover bolts and movable sheave bearings, a recessed mounting bolt and a redesigned fixed face for increased durability. Uses same basic tuning parts as the 102-C and 108-C clutches. All clutches are uncalibrated and sold without cam arms and spring. 108-EXP clutches include the mounting bolt and washer, cam arm pivot bolts, nylon washers and lock nuts, instructions and the free Comet Tuning Manual. , For Ski Doo manual start models with 1 3/8 in. wide drive belts only. Positive depth numbers indicated the taper starts the specified distance into the casting.. 219508A
1 on Hand
More Info/Options for Comet 108-EXP High Performance Uncalibrated Clutch 382663
|
|
|
|
$322.99
Comet 108-EXP High Performance Uncalibrated Clutch 382930
Dennis Kirk Part #: 382930
Comet 108-EXP High Performance Uncalibrated Clutch 382930: Manufacturer part # 219703A - Comets 108-EXP clutch, designed for more power, more endurance, more of everything you need for speed. 108-EXP clutches offer maximum tuneability and can be easily calibrated by changing the cam arms and spring to more efficiently use your engines horsepower. Tried, tested and built to handle high horsepower engines. Newest design features wide rollers for increased bearing area, improved cover bolts and movable sheave bearings, a recessed mounting bolt and a redesigned fixed face for increased durability. Uses same basic tuning parts as the 102-C and 108-C clutches. All clutches are uncalibrated and sold without cam arms and spring. 108-EXP clutches include the mounting bolt and washer, cam arm pivot bolts, nylon washers and lock nuts, instructions and the free Comet Tuning Manual. , For Ski Doo manual start models with 1 3/8 in. wide drive belts only. Positive depth numbers indicated the taper starts the specified distance into the casting.. 219703A
4 on Hand
More Info/Options for Comet 108-EXP High Performance Uncalibrated Clutch 382930
|
|
|
|
|
|
$322.99
Supertrapp MudSlinger Exhaust System 433614
Dennis Kirk Part #: 433614
Supertrapp MudSlinger Exhaust System 433614: ATV riders will be thrilled with SuperTrapp's introduction of the new MudSlinger to its production line. This rugged exhaust, with its polished stainless steel outer body has an aluminum end cap that not only looks cool, but will hold up to th abuse that aggressive ATV riders dish out. The mechanical core offers dramatic increase in torque and throttle response. Equipped with removable USFS Approved Spark Arrestor, the MudSlinger has an aggressive tone, yet is 96db and forestry legal. It utilizes Pillow Pack packing for the ultimate in durability along with superior silencing and an optional deep water fording kit available (part number 433740). All models come complete with clear instructions and all hardware which eliminate guesswork by lending bolt on power right out of the box..
3 on Hand
More Info/Options for Supertrapp MudSlinger Exhaust System 433614
|
|
|
|
$322.99
Saddlemen Tattoo Profiler Seat 453858
Dennis Kirk Part #: 453858
Saddlemen Tattoo Profiler Seat 453858: Manufacturer part # S05030512 - Flame-stitch design and 3-D effect give these leather seats a custom look. Excellent comfort from a seat with narrow styling, a thin profile and low ride height. SaddleGel pad in drivers portion for even weight distribution and better comfort on long trips. UV and weather resistant. Made in the U.S.A.. DRIVER SEAT: Length: 18 1/4 in.. Width: 14 in.. BACKREST HEIGHT: Length: 6 in.. Width: Not Available. PASSENGER SEAT: Length: 12 3/4 in.. Width: 7 in.. Overall Length: 31 in.. S05030512
1 on Hand
More Info/Options for Saddlemen Tattoo Profiler Seat 453858
|
|
|
|
$322.99
Diamond Engineering The Groove Stainless Steel Custom Transformation Kit 272150
Dennis Kirk Part #: 272150
Diamond Engineering The Groove Stainless Steel Custom Transformation Kit 272150: Kits include a dozen groups of polished fasteners so you can give your bike a custom look without having to completely disassemble it. Kits include fasteners for the engine, transmission and the most visible areas of the motorcycle. Fasteners included in kits for primary, inspections and inner primary; cam and points; oil pump or oil line cover, filter mount and sensors (Dyna and Twin Cam FLH) or oil filter plugs and sensors (Twin Cam Softail); lifter blocks; rocker box; coil and circuit breaker covers (Dyna); transmission side cover; oil filler (FLH models); transmission top cover; handlebar clamp, switch housings and master cylinder; front fender or front fender trim and fuel tank (FLH models); rear fender rail or swingarm pivot blocks and rear floorboard brackets (FLH models); and side covers (FXR)..
1 on Hand
More Info/Options for Diamond Engineering The Groove Stainless Steel Custom Transformation Kit 272150
|
|
|
|
|
|
$322.99
Hot Cams Cam 148772
Dennis Kirk Part #: 148772
Hot Cams Cam 148772: Manufacturer part # 2031-1S - Extract maximum performance from your engine. Hot Cams provide increased intake and exhaust duration for improved breathability and more horsepower. Provides significantly more mid-range punch and top-end speed for most models. Core trade-in not required so you can keep the original camshaft. Compatible with most models' stock valve springs and rockers. , HONDA XR250R Stage 1 , Vastly improved mid-range and top-end power; compatible with stock valve springs and rockersINTAKE LIFT: 9mm, INTAKE DURATION(@1mm): 236, EXHAUST LIFT: 8.7mm, EXHAUST DURATION(@1mm): 236. 2031-1S
1 on Hand
More Info/Options for Hot Cams Cam 148772
|
|
|
|
$322.99
Supertrapp MudSlinger Exhaust System 433618
Dennis Kirk Part #: 433618
Supertrapp MudSlinger Exhaust System 433618: ATV riders will be thrilled with SuperTrapp's introduction of the new MudSlinger to its production line. This rugged exhaust, with its polished stainless steel outer body has an aluminum end cap that not only looks cool, but will hold up to th abuse that aggressive ATV riders dish out. The mechanical core offers dramatic increase in torque and throttle response. Equipped with removable USFS Approved Spark Arrestor, the MudSlinger has an aggressive tone, yet is 96db and forestry legal. It utilizes Pillow Pack packing for the ultimate in durability along with superior silencing and an optional deep water fording kit available (part number 433740). All models come complete with clear instructions and all hardware which eliminate guesswork by lending bolt on power right out of the box..
2 on Hand
More Info/Options for Supertrapp MudSlinger Exhaust System 433618
|
|
|
|
$322.99
Cycle Shack Oval Mufflers 4402113
Dennis Kirk Part #: 4402113
Cycle Shack Oval Mufflers 4402113: Manufacturer part # MOV-435 - Unique oval design. Made from 4" tubing that simply installs onto the stock OEM headers. Will increase performance and provides a terrific sound. Mounting bracket and hardware are included. Chrome finish. Sold in pairs. Optional front and rear chrome heat shields are sold separately. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing... MOV-435
1 on Hand
More Info/Options for Cycle Shack Oval Mufflers 4402113
|
|
|
|
$322.99
Saddlemen Tattoo Profiler Seat 454571
Dennis Kirk Part #: 454571
Saddlemen Tattoo Profiler Seat 454571: Manufacturer part # K06110512 - Flame-stitch design and 3-D effect give these leather seats a custom look. Excellent comfort from a seat with narrow styling, a thin profile and low ride height. SaddleGel pad in drivers portion for even weight distribution and better comfort on long trips. UV and weather resistant. Made in the U.S.A.. DRIVER SEAT: Length: 18 1/4 in.. Width: 14 in.. BACKREST HEIGHT: Length: 6 in.. Width: Not Available. PASSENGER SEAT: Length: 12 3/4 in.. Width: 7 in.. Overall Length: 31 in.. K06110512
2 on Hand
More Info/Options for Saddlemen Tattoo Profiler Seat 454571
|
|
|
|
$322.99
Supertrapp MudSlinger Exhaust System 433617
Dennis Kirk Part #: 433617
Supertrapp MudSlinger Exhaust System 433617: ATV riders will be thrilled with SuperTrapp's introduction of the new MudSlinger to its production line. This rugged exhaust, with its polished stainless steel outer body has an aluminum end cap that not only looks cool, but will hold up to th abuse that aggressive ATV riders dish out. The mechanical core offers dramatic increase in torque and throttle response. Equipped with removable USFS Approved Spark Arrestor, the MudSlinger has an aggressive tone, yet is 96db and forestry legal. It utilizes Pillow Pack packing for the ultimate in durability along with superior silencing and an optional deep water fording kit available (part number 433740). All models come complete with clear instructions and all hardware which eliminate guesswork by lending bolt on power right out of the box..
1 on Hand
More Info/Options for Supertrapp MudSlinger Exhaust System 433617
|
|
|
|
$322.99
Saddlemen Tattoo Profiler Seat 453837
Dennis Kirk Part #: 453837
Saddlemen Tattoo Profiler Seat 453837: Manufacturer part # H03100512 - Flame-stitch design and 3-D effect give these leather seats a custom look. Excellent comfort from a seat with narrow styling, a thin profile and low ride height. SaddleGel pad in drivers portion for even weight distribution and better comfort on long trips. UV and weather resistant. Made in the U.S.A.. DRIVER SEAT: Length: 18 1/4 in.. Width: 14 in.. BACKREST HEIGHT: Length: 6 in.. Width: Not Available. PASSENGER SEAT: Length: 12 3/4 in.. Width: 7 in.. Overall Length: 31 in.. H03100512
| |
