|
|
|
|
$328.99
Pro Circuit T-4 4-Stroke Silencer 431963
Dennis Kirk Part #: 431963
Pro Circuit T-4 4-Stroke Silencer 431963: Manufacturer part # 18310097 - Designed to boost output throughout the powerband. Fine-tune your power delivery by changing end caps (see T-4 Replacement End Caps under Exhaust Replacement Parts and Accessories). Lighter than stock. Extruded 6063 aluminum silencer resists oxidation and features long-lasting packing material. Quick access to the U.S.F.S. approved screen spark arrester through removable end cap tip. Can be used with OEM or Pro Circuit headpipe. , 2 in. End Cap-Large Canister exhaust system pictured. Note: This requires a silencer mount kit part number 43-1710. 18310097
1 on Hand
More Info/Options for Pro Circuit T-4 4-Stroke Silencer 431963
|
|
|
|
$328.99
H39287 Russ Wernimont Designs 9000r-RSD Rear Fender-11 in. W
Dennis Kirk Part #: H39287
H39287 Russ Wernimont Designs 9000r-RSD Rear Fender-11 in. W: Manufacturer part # DS-380310 - Russ Wernimont is a cutting edge fabricator with over 26 years of custom metal fabrication experience. Durable and distinguished, these fenders are made of heavy-gauge steel. For right-side drive and use with 230/240mm tire. Built by true craftsmen, each fender uses an absolute minimum of finishing bodywork. Available in four popular widths. A master fender builder inspects each fender to ensure straightness, consistency and a flawless finish. Has no wiring tubes. Fenders come undrilled so you can position them to look and work best for your application. Handmade in the U.S.A.. Note: Fender must be prefitted before painting.. DS-380310
1 on Hand
More Info/Options for H39287 Russ Wernimont Designs 9000r-RSD Rear Fender-11 in. W
|
|
|
|
$328.99
H39286 Russ Wernimont Designs 2000R-RSd Rear Fender-9 in. W
Dennis Kirk Part #: H39286
H39286 Russ Wernimont Designs 2000R-RSd Rear Fender-9 in. W: Manufacturer part # DS-380621 - Russ Wernimont is a cutting edge fabricator with over 26 years of custom metal fabrication experience. Durable and distinguished, these fenders are made of heavy-gauge steel. Built by true craftsmen, each fender uses an absolute minimum of finishing bodywork. A master fender builder inspects each fender to ensure straightness, consistency and a flawless finish. Has no wiring tubes. Fenders come undrilled so you can position them to look and work best for your application. Handmade in the U.S.A.. Note: Fender must be prefitted before painting.. DS-380621
1 on Hand
More Info/Options for H39286 Russ Wernimont Designs 2000R-RSd Rear Fender-9 in. W
|
|
|
|
$328.99
H39601 Russ Wernimont Designs 2000R Rear Fender-11 in. W x 37 1/2 in. L
Dennis Kirk Part #: H39601
H39601 Russ Wernimont Designs 2000R Rear Fender-11 in. W x 37 1/2 in. L: Manufacturer part # DS-380309 - Russ Wernimont is a cutting edge fabricator with over 26 years of custom metal fabrication experience. Durable and distinguished, these fenders are made of heavy-gauge steel. For left side drive and use with 230/240mm tire. Built by true craftsmen, each fender uses an absolute minimum of finishing bodywork. A master fender builder inspects each fender to ensure straightness, consistency and a flawless finish. Has no wiring tubes. Fenders come undrilled so you can position them to look and work best for your application. Handmade in the U.S.A.. Note: Fender must be prefitted before painting.. DS-380309
7 on Hand
More Info/Options for H39601 Russ Wernimont Designs 2000R Rear Fender-11 in. W x 37 1/2 in. L
|
|
|
|
$328.99
Yoshimura TRS Competition Series Exhaust System w/Aluminum Muffler 432457
Dennis Kirk Part #: 432457
Yoshimura TRS Competition Series Exhaust System w/Aluminum Muffler 432457: Manufacturer part # 2440500SA - Features the TRC tri-oval canister -- unique three-sided design and two-piece style end cap with removable, U.S.F.S.-approved screen-type spark arrestor. Tri-oval muffler shape gives unique looks and sound. Design ensures superior performance by creating a smooth exhaust gas flow rate. Impressive performance increases across the entire rev range. TRC and TRS Competition Series exhaust feature header and tailpipe that are 304L stainless steel construction Pro Series exhaust features full titanium header and tailpipe construction.. 2440500SA
3 on Hand
More Info/Options for Yoshimura TRS Competition Series Exhaust System w/Aluminum Muffler 432457
|
|
|
|
|
|
|
|
$328.99
Pro Circuit Type 496 Exhaust System w/Headpipe 431994
Dennis Kirk Part #: 431994
Pro Circuit Type 496 Exhaust System w/Headpipe 431994: Manufacturer part # 18210188 - Designed to reduce exhaust noise level to legal dB while producing a noticeable gain in horsepower over OEM systems. State-of-the-art system uses a longer aluminum body and special internal E-Glass packing for maximum sound disbursement for less noise and more power. Lightweight brushed aluminum muffler body. FIM-approved stainless steel end cap and intake tube. Hand-assembled and -welded for a fit and finish that would rival any Factory Works part. Includes lightweight aluminum mounting brackets. Wire mesh removable U.S. Forest Service-approved spark arrester. Modular end caps. Includes head pipe. 18210188
1 on Hand
More Info/Options for Pro Circuit Type 496 Exhaust System w/Headpipe 431994
|
|
|
|
$328.99
Pro Circuit T-4 4-Stroke Silencer 431967
Dennis Kirk Part #: 431967
Pro Circuit T-4 4-Stroke Silencer 431967: Manufacturer part # 18310100 - Designed to boost output throughout the powerband. Fine-tune your power delivery by changing end caps (see T-4 Replacement End Caps under Exhaust Replacement Parts and Accessories). Lighter than stock. Extruded 6063 aluminum silencer resists oxidation and features long-lasting packing material. Quick access to the U.S.F.S. approved screen spark arrester through removable end cap tip. Can be used with OEM or Pro Circuit headpipe. , 2 in. End Cap-Large Canister exhaust system pictured. Note: This requires a silencer mount kit part number 43-1710. 18310100
1 on Hand
More Info/Options for Pro Circuit T-4 4-Stroke Silencer 431967
|
|
|
|
$328.99
Pro Circuit Type 496 Exhaust System w/Headpipe 433348
Dennis Kirk Part #: 433348
Pro Circuit Type 496 Exhaust System w/Headpipe 433348: Manufacturer part # 18210641 - Designed to reduce exhaust noise level to legal dB while producing a noticeable gain in horsepower over OEM systems. State-of-the-art system uses a longer aluminum body and special internal E-Glass packing for maximum sound disbursement for less noise and more power. Lightweight brushed aluminum muffler body. FIM-approved stainless steel end cap and intake tube. Hand-assembled and -welded for a fit and finish that would rival any Factory Works part. Includes lightweight aluminum mounting brackets. Wire mesh removable U.S. Forest Service-approved spark arrester. Modular end caps. Includes head pipe. 18210641
1 on Hand
More Info/Options for Pro Circuit Type 496 Exhaust System w/Headpipe 433348
|
|
|
|
|
|
|
|
$328.95
H4450 Vance & Hines Staggered Dual Straightshots System
Dennis Kirk Part #: H4450
H4450 Vance & Hines Staggered Dual Straightshots System: Manufacturer part # 16803 - These bold and beautiful pipes provide the powerful look of straight pipes with features that set them apart from other straight pipes. 1 3/4 in. headpipes with 2 1/4 in. bodies. Full-length, full 220 degree coverage heat shields are plasma-arc cut from a full piece of tubing that matches the bodies exactly and give you a non-blueing, fat pipe look. Will not accept Hot Tips. Removable baffles provide powerful sound, but reduce the bark common to normal straight pipes. Straightshot systems include all necessary mounting hardware and instructions for a hassle-free, perfect fit every time. Replacement baffle use: H25-229. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration., , Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 16803
2 on Hand
More Info/Options for H4450 Vance & Hines Staggered Dual Straightshots System
|
|
|
|
$328.95
H4452 Vance & Hines Staggered Dual Straightshots System
Dennis Kirk Part #: H4452
H4452 Vance & Hines Staggered Dual Straightshots System: Manufacturer part # 16805 - These bold and beautiful pipes provide the powerful look of straight pipes with features that set them apart from other straight pipes. 1 3/4 in. headpipes with 2 1/4 in. bodies. Full-length, full 220 degree coverage heat shields are plasma-arc cut from a full piece of tubing that matches the bodies exactly and give you a non-blueing, fat pipe look. Will not accept Hot Tips. Removable baffles provide powerful sound, but reduce the bark common to normal straight pipes. Straightshot systems include all necessary mounting hardware and instructions for a hassle-free, perfect fit every time. Replacement baffle use: H25-229. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration., , Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 16805
Expected Soon
More Info/Options for H4452 Vance & Hines Staggered Dual Straightshots System
|
|
|
|
$328.95
Erion Racing Stainless Steel Side Mount Slip-On 4401702
Dennis Kirk Part #: 4401702
Erion Racing Stainless Steel Side Mount Slip-On 4401702: The same race-proven technology that won two consecutive 600 Supersport class titles and numerous Formula Xtreme championships. Offer dramatic performance boosts throughout the range. TIG-welded. Canisters have satin finish. Better exhaust flow due to 2.125" and 2.25" perforated cores. Woven stainless steel mesh and E glass packing offer two-stage sound suppression that's twice as durable as conventional systems. Canister has laser-etched logo. Included Items: , (1) Erion Exhaust Muffler, (1) Barrel Clamp, (1) Muffler Body Clamp, (1) Muffler Body Clamp Gasket, (2) Springs, (1) Instructions, Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration..
1 on Hand
More Info/Options for Erion Racing Stainless Steel Side Mount Slip-On 4401702
|
|
|
|
$328.95
H4454 Vance & Hines Staggered Dual Straightshots System
Dennis Kirk Part #: H4454
H4454 Vance & Hines Staggered Dual Straightshots System: Manufacturer part # 16809 - These bold and beautiful pipes provide the powerful look of straight pipes with features that set them apart from other straight pipes. 1 3/4 in. headpipes with 2 1/4 in. bodies. Full-length, full 220 degree coverage heat shields are plasma-arc cut from a full piece of tubing that matches the bodies exactly and give you a non-blueing, fat pipe look. Will not accept Hot Tips. Removable baffles provide powerful sound, but reduce the bark common to normal straight pipes. Straightshot systems include all necessary mounting hardware and instructions for a hassle-free, perfect fit every time. Replacement baffle use: H25-229. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration., , Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 16809
1 on Hand
More Info/Options for H4454 Vance & Hines Staggered Dual Straightshots System
|
|
|
|
$328.95
H25307 Vance & Hines Staggered Dual Straightshots System
Dennis Kirk Part #: H25307
H25307 Vance & Hines Staggered Dual Straightshots System: Manufacturer part # 16811 - These bold and beautiful pipes provide the powerful look of straight pipes with features that set them apart from other straight pipes. 1 3/4 in. headpipes with 2 1/4 in. bodies. Full-length, full 220 degree coverage heat shields are plasma-arc cut from a full piece of tubing that matches the bodies exactly and give you a non-blueing, fat pipe look. Will not accept Hot Tips. Removable baffles provide powerful sound, but reduce the bark common to normal straight pipes. Straightshot systems include all necessary mounting hardware and instructions for a hassle-free, perfect fit every time. Replacement baffle use: H25-229. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration., , Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 16811
Expected Soon
More Info/Options for H25307 Vance & Hines Staggered Dual Straightshots System
|
|
|
|
CLEARANCE!
Was: $821.99
Now: $328.80
Leo Vince X3 Motocross/Supermoto Classic Exhaust System 432667
Dennis Kirk Part #: 432667
Leo Vince X3 Motocross/Supermoto Classic Exhaust System 432667: Manufacturer part # 3961 - Top-quality, full titanium systems that are tailored to individual models for maximum horsepower and torque gains. Titanium header pipe is mated to titanium muffler with satin-finish sleeve. Primary header pipe section has carbon fiber casing to protect against impacts. Includes U.S.F.S. homologated spark arrestor. Two easily replaceable end caps included to ensure noise regulations are met for both AMA and FIM. Mufflers mount with included carbon fiber straps. Removable front muffler sump and end cap for easy replacement of fiberglass packing.. 3961
1 on Hand
More Info/Options for Leo Vince X3 Motocross/Supermoto Classic Exhaust System 432667
|
|
|
|
CLEARANCE!
Was: $546.99
Now: $328.19
Terry Components Terminal Velocity II 201570
Dennis Kirk Part #: 201570
Terry Components Terminal Velocity II 201570: Manufacturer part # FM300 - For models with Magnetti-Marelli EFI 1995-2001, or models with Delphi EFI 2002-2006. Closed-loop system programs the fuel injection system while you ride. You no longer need to make constant adjustments; just hook it up and you are set to ride. Decreases emissions and fuel consumption while increasing the horsepower and torque up to 20%. Works with 80", 88", 95", 103", EVO, Twin Cam and V-Rod engines. Uses factory OEM sensors and attaches directly to factory ECU. Fully automatic dynamic tuning with a Robust Platinum II oxygen sensor. Factory ECU calibration, updated calibration and race-tuned calibrations are all organized by the system. Organizes the factory ignition and fuel tables by using the factory preset calibration tables. Functions by using Alpha-N rpm and throttle position system. Over-molded, sealed, surface-mounted circuit board design. Easy-to-install; just connect six wires and the O2 sensor. Made in the U.S.A.. NOTE: Drilling and welding required when installing the O2 sensor on some models.. This will not work on 2006 Dyna models. FM300
1 on Hand
More Info/Options for Terry Components Terminal Velocity II 201570
|
|
|
|
$327.99
Pro Circuit T-4 4-Stroke Silencer 447237
Dennis Kirk Part #: 447237
Pro Circuit T-4 4-Stroke Silencer 447237: Manufacturer part # 4QK86250 - Designed to boost output throughout the powerband. Fine-tune your power delivery by changing end caps (see T-4 Replacement End Caps under Exhaust Replacement Parts and Accessories). Lighter than stock. Extruded 6063 aluminum silencer resists oxidation and features long-lasting packing material. Quick access to the U.S.F.S. approved screen spark arrester through removable end cap tip. Can be used with OEM or Pro Circuit headpipe. , 2 in. End Cap-Large Canister exhaust system pictured. Note: This requires a silencer mount kit part number 43-1710. 4QK86250
1 on Hand
More Info/Options for Pro Circuit T-4 4-Stroke Silencer 447237
|
|
|
|
$327.99
Pro Circuit T-4 4-Stroke Silencer 448917
Dennis Kirk Part #: 448917
Pro Circuit T-4 4-Stroke Silencer 448917: Manufacturer part # 4QH97250 - Designed to boost output throughout the powerband. Fine-tune your power delivery by changing end caps (see T-4 Replacement End Caps under Exhaust Replacement Parts and Accessories). Lighter than stock. Extruded 6063 aluminum silencer resists oxidation and features long-lasting packing material. Quick access to the U.S.F.S. approved screen spark arrester through removable end cap tip. Can be used with OEM or Pro Circuit headpipe. , 2 in. End Cap-Large Canister exhaust system pictured. Note: This requires a silencer mount kit part number 43-1710. 4QH97250
| |
