TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Wind-Vest Clear 16 1, Wind-Vest Windshield 101253CT

CLEARANCE! Was: $588.99 Now: $353.39 BUB Jug Huggers Exhausts 051373CG $353.39 Manufacturer: BUB Dennis Kirk Part #: H44366 BUB Jug Huggers Exhausts: Manufacturer part # 051373CG - Stepped-header technology highlights this turndown style system. Full 2 1/2 in. heat shields cover the header completely. End caps are slash-cut and chrome-plated. Standard high-flow baffles are removable/replaceable. Tune your sound with optional stealth baffles (more back pressure, less sound); available separately. Mounting bracket and hardware included. Replacement baffles; 44-01449. replacement end caps; 44-9617. , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 051373CG 3 on hand More Info/Options for BUB Jug Huggers Exhausts 051373CG

CLOSEOUT! Was: $470.99 Now: $353.24 White Brothers Stainless Steel Carbon Pro II Muffler 05810 $353.24 Manufacturer: White Brothers Dennis Kirk Part #: 433314 White Brothers Stainless Steel Carbon Pro II Muffler: Manufacturer part # 05810 - State-of-the-art complete systems deliver out-of-the-hole snap, very strong mid-range and an upper hook that lets it rev hard and long. Lightweight carbon fiber muffler, machined billet aluminum end caps and mounting brackets. Two-piece modular exhaust brackets. Billet aluminum exhaust flange and inlet tips are hard anodized for increased durability. Race baffle for maximum performance gains. Innovative headpipe design allows muffler to be tucked behind side panel. TIG-welded stainless steel headpipe and mid-pipe. Designed for competition use only. , NOTE: Spark arrestor cannot be used; if spark arrestor is used, manufacturer's warranty is void., , Included Items: , Muffler w/mid pipe, Two 8mm-1.25 x 60mm flange bolt, Two Spacer, Torx wrench, Instructions, NOTE: Muffler only. 05810 1 on hand More Info/Options for White Brothers Stainless Steel Carbon Pro II Muffler 05810

$352.99 Supertrapp Super Elite Slip-On Mufflers w/o End Caps 128-65115 $352.99 Manufacturer: Supertrapp Dennis Kirk Part #: 4401143 Supertrapp Super Elite Slip-On Mufflers w/o End Caps: Manufacturer part # 128-65115 - Supplies increased horsepower and torque, yet is only 3db louder than stock. No blueing with internal heatshields that protects chrome plating. Change the look eight different ways with chrome end caps. End caps available separately. Billet End Caps: , Fluted - 4401146, Tapered - 4401147, Grooved - 4401148, Java Jug - 4401263 Steel End Caps: , Slash - 4401145, Fishtail - 444118, Turnout/Turndown -444117, Tapered-444119 Yaffe End Caps: , Afterburner Chrome - 4402655, Afterburner Black - 4402654, Big Papa Chrome - 4402656, Claw Chrome - 4402657, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing.. 128-65115 2 on hand More Info/Options for Supertrapp Super Elite Slip-On Mufflers w/o End Caps 128-65115

$352.99 LePera Full-Length 2-Up Deluxe Silhouette Series SILLHOUETTE $352.99 Manufacturer: LePera Dennis Kirk Part #: H457058 LePera Full-Length 2-Up Deluxe Silhouette Series: Manufacturer part # SILLHOUETTE - Motorcycle seats are a riders, best friend or worst enemy. There is no in-between area. Get the sleek look of the original Silhouette with wider seat area for greater support. Powder-coated 16-gauge steel base. Top-grade vinyl cover. Made in the USA, , Dimensions: , Overall Length: 28-1/2 in., Drivers Seat: Length: 11 in., Width: 12 in., Backrest Height: 6-1/2 in., Passenger Seat: Length: 12 in., Width: 7-1/2 in.. SILLHOUETTE 1 on hand More Info/Options for LePera Full-Length 2-Up Deluxe Silhouette Series SILLHOUETTE

$352.99 Supertrapp Super Elite Slip-On Mufflers 128-65116 $352.99 Manufacturer: Supertrapp Dennis Kirk Part #: 4401144 Supertrapp Super Elite Slip-On Mufflers: Manufacturer part # 128-65116 - Supplies increased horsepower and torque, yet is only 3db louder than stock. No blueing with internal heatshields that protects chrome plating. Change the look eight different ways with chrome end caps. End caps available separately. Billet End Caps: , Fluted - 4401146, Tapered - 4401147, Grooved - 4401148, Java Jug - 4401263 Steel End Caps: , Slash - 4401145, Fishtail - 444118, Turnout/Turndown - 444117, Tapered - 444119 Yaffee End Caps: , Afterburner Chrome - 4402655, Afterburner Black - 4402654, Big Papa Chrome - 4402656, Claw Chrome - 4402657, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing.. 128-65116 2 on hand More Info/Options for Supertrapp Super Elite Slip-On Mufflers 128-65116

$352.99 Wind-Vest Tint Windshield 101275CT $352.99 Manufacturer: Wind-Vest Dennis Kirk Part #: H23330 Wind-Vest Tint Windshield: Manufacturer part # 101275CT - Functional and stylish windshields feature easy mounting and dismounting-takes just a few minutes. Constructed of scratch-resistant, 5mm thick Acrycast acrylic. Mounting hardware is chrome-plated aircraft billet aluminum and all fasteners are stainless steel. Made in the U.S.A... 101275CT 1 on hand More Info/Options for Wind-Vest Tint Windshield 101275CT

$352.99 LePera Silhouette Full Length 2 up Seat SILLHOUETTE H39328 $352.99 Manufacturer: LePera Dennis Kirk Part #: H39328 LePera Silhouette Full Length 2 up Seat: Manufacturer part # SILLHOUETTE - DennisKirk Part # H39328 - Motorcycle seats are a riders, best friend or worst enemy. There is no in-between area. Wonderful comfort because of enhanced back support. Low, sleek style with a molded one-piece foam foundation; premium-grade vinyl cover over 16-gauge powder-coated steel base plate. Seat bottom is carpeted to protect fender. Made in the U.S.A.. , Dimensions: , Overall Length: 30-1/2 in., Drivers Seat: Length: 19 in., Width: 12 in., Backrest Height: 3-1/2 in., Passenger Seat: Length: 11 in., Width: 7-1/2 in.. SILLHOUETTE 2 on hand More Info/Options for LePera Silhouette Full Length 2 up Seat SILLHOUETTE H39328

$352.99 Dakota Digital Round 2 1/16 in. Clock/Temperature Gauge/Compass HLY3171 $352.99 Manufacturer: Dakota Digital Dennis Kirk Part #: 407327 Dakota Digital Round 2 1/16 in. Clock/Temperature Gauge/Compass: Manufacturer part # HLY3171 - Designed with Ambient air temperature sender and electronic compass sender. Simple, push-button calibration procedure. Features a chrome front bezel, non-glare, scratch-resistant lens and a machined aluminum housing. , , H40638 Chrome Mounting Cup for 2-1/16 in. Gauges, H40640 1 in. Handlebar Clamp for 2-1/16 in. Mounting Cup, H40641 1-1/4 in. Handlebar Clamp for 2-1/16 in. Mounting Cup, H40642 1-1/2 in. Handlebar Clamp for 2-1/16 in. Mounting Cup. HLY3171 Expected Soon More Info/Options for Dakota Digital Round 2 1/16 in. Clock/Temperature Gauge/Compass HLY3171

$352.99 Wind-Vest Clear Windshield pH23319 $352.99 Manufacturer: Wind-Vest Dennis Kirk Part #: 232948 Wind-Vest Clear Windshield: Manufacturer part # pH23319 - Functional and stylish windshields feature easy mounting and dismounting-takes just a few minutes. Constructed of scratch-resistant, 5mm thick Acrycast acrylic. Mounting hardware is chrome-plated aircraft billet aluminum and all fasteners are stainless steel. Made in the U.S.A... pH23319 1 on hand More Info/Options for Wind-Vest Clear Windshield pH23319

$352.99 LePera Smooth 2-Up Full-Length Daytona Sport Seat DAYTONA SPORT $352.99 Manufacturer: LePera Dennis Kirk Part #: H457054 LePera Smooth 2-Up Full-Length Daytona Sport Seat: Manufacturer part # DAYTONA SPORT - Motorcycle seats are a riders, best friend or worst enemy. There is no in-between area. Low, sleek style with enhanced back support. First-quality vinyl cover over molded one-piece foam foundation on a 16-gauge powder-coated steel base plate. Seat bottom is carpeted to protect fender. Made in the USA. , Dimensions: , Overall Length: 28-3/4 in., Drivers Seat: Length: 13 in., Width: 11-1/2 in., Backrest Height: 6-1/2 in., Passenger Seat: Length: 12 in., Width: 8 in.. DAYTONA SPORT 1 on hand More Info/Options for LePera Smooth 2-Up Full-Length Daytona Sport Seat DAYTONA SPORT

$352.99 Wind-Vest Tint Windshield pH23320 $352.99 Manufacturer: Wind-Vest Dennis Kirk Part #: 232949 Wind-Vest Tint Windshield: Manufacturer part # pH23320 - Functional and stylish windshields feature easy mounting and dismounting-takes just a few minutes. Constructed of scratch-resistant, 5mm thick Acrycast acrylic. Mounting hardware is chrome-plated aircraft billet aluminum and all fasteners are stainless steel. Made in the U.S.A... pH23320 1 on hand More Info/Options for Wind-Vest Tint Windshield pH23320

$352.99 Wind-Vest Clear Windshield 101047C $352.99 Manufacturer: Wind-Vest Dennis Kirk Part #: 232214 Wind-Vest Clear Windshield: Manufacturer part # 101047C - More than a decade after the original WindVest made it's debut, the company's goal remains the same to continue offering the best high performance motorcycle windscreens. Functional and stylish windshields feature easy mounting and dismounting-takes just a few minutes. Constructed of scratch-resistant, 5mm thick Acrycast acrylic. Tinted and clear styles. 14 in. W x 14 in. H. Mounting hardware is chrome-plated aircraft billet aluminum and all fasteners are stainless steel. Made in the U.S.A... 101047C 1 on hand More Info/Options for Wind-Vest Clear Windshield 101047C

$352.99 Wind-Vest Clear 16 1/2 101280C $352.99 Manufacturer: Wind-Vest Dennis Kirk Part #: H23316 Wind-Vest Clear 16 1/2: Manufacturer part # 101280C - Fits 1 1/4" T-Bars. Functional and stylish windshields feature easy mounting and dismounting-takes just a few minutes. Constructed of scratch-resistant, 5mm thick Acrycast acrylic. Tinted and clear styles. Available in either 14 1/2 in. or 16 1/2 in. height with 14 in. width. Mounting hardware is chrome-plated aircraft billet aluminum and all fasteners are stainless steel. Made in the U.S.A... 101280C 1 on hand More Info/Options for Wind-Vest Clear 16 1/2 101280C

$352.99 LePera Silhouette Series Full-Length 2-Up Seat SILLHOUETTE $352.99 Manufacturer: LePera Dennis Kirk Part #: 454500 LePera Silhouette Series Full-Length 2-Up Seat: Manufacturer part # SILLHOUETTE - Sleek, low-profile design retains back support for maximum rider comfort. Sculpted, one-piece molded foam foundation, top-grade vinyl cover. Powder-coated steel base plates are carpeted to protect paint. Full-length 2-up style. Made in the U.S.A.. , Dimensions: , Overall Length: 31 in., Drivers Seat: Length: 19-1/2 in., Width: 12 in., Backrest Height: 5 in., Passenger Seat: Length: 11 in., Width: 8 in.. SILLHOUETTE 2 on hand More Info/Options for LePera Silhouette Series Full-Length 2-Up Seat SILLHOUETTE

$352.99 Dakota Digital 3 3/8 in. Round Gauge HLY3401 $352.99 Manufacturer: Dakota Digital Dennis Kirk Part #: 407329 Dakota Digital 3 3/8 in. Round Gauge: Manufacturer part # HLY3401 - Gauge measures 0-300 degree F/0-150 degree C. Resolution: 1 degree/1 degree C. Features chrome front bezel, non-glare, anti-scratch lens and machined aluminum housing. For use with 407172 or 407333. , , 407621 Chrome Mounting Cup for 3-3/8 in. Gauges, 407623 Raw Steel Mounting Cup for 3-3/8 in. Gauges, 407617 1 in. Handlebar Clamp for 3-3/8 in. Mounting Cup, 407618 1-1/4 in. Handlebar Clamp for 3-3/8 in. Mounting Cup, 407619 1-1/2 in. Handlebar Clamp for 3-3/8 in. Mounting Cup. HLY3401 1 on hand More Info/Options for Dakota Digital 3 3/8 in. Round Gauge HLY3401

$352.99 Wind-Vest Tint Windshield 101047CT $352.99 Manufacturer: Wind-Vest Dennis Kirk Part #: 232215 Wind-Vest Tint Windshield: Manufacturer part # 101047CT - More than a decade after the original Wind Vest made its debut, the companys goal remains the same to continue offering the best high performance motorcycle windscreens. Functional and stylish windshields feature easy mounting and dismounting-takes just a few minutes. Constructed of scratch-resistant, 5mm thick Acrycast acrylic. Tinted and clear styles. 14 in. W x 14 in. H. Mounting hardware is chrome-plated aircraft billet aluminum and all fasteners are stainless steel. Made in the U.S.A... 101047CT 1 on hand More Info/Options for Wind-Vest Tint Windshield 101047CT

$352.99 Wind-Vest Tinted 16 1/2 101280CT $352.99 Manufacturer: Wind-Vest Dennis Kirk Part #: H23331 Wind-Vest Tinted 16 1/2: Manufacturer part # 101280CT - Fits 1 1/4" T-Bars. Functional and stylish windshields feature easy mounting and dismounting-takes just a few minutes. Constructed of scratch-resistant, 5mm thick Acrycast acrylic. Tinted and clear styles. Available in either 14 1/2 in. or 16 1/2 in. height with 14 in. width. Mounting hardware is chrome-plated aircraft billet aluminum and all fasteners are stainless steel. Made in the U.S.A... 101280CT 1 on hand More Info/Options for Wind-Vest Tinted 16 1/2 101280CT

$352.99 Dakota Digital Round 2 1/16 in. Mulit-Gauge HLY3402 $352.99 Manufacturer: Dakota Digital Dennis Kirk Part #: 407347 Dakota Digital Round 2 1/16 in. Mulit-Gauge: Manufacturer part # HLY3402 - For use with 407172 or 407333 2-1/16 in. fuel level or air pressure gauge, water or oil pressure gauge and voltmeter. H40638 Chrome Mounting Cup for 2-1/16 in. Gauges, H40640 1 in. Handlebar Clamp for 2-1/16 in. Mounting Cup, H40641 1-1/4 in. Handlebar Clamp for 2-1/16 in. Mounting Cup, H40642 1-1/2 in. Handlebar Clamp for 2-1/16 in. Mounting Cup. HLY3402 1 on hand More Info/Options for Dakota Digital Round 2 1/16 in. Mulit-Gauge HLY3402

$352.99