TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Mustang One-Piece Ultra Touring Seat w

$354.99 Mustang Wide Vintage Solo Seat w/Removable Backrest 79429 $354.99 Manufacturer: Mustang Dennis Kirk Part #: 455197 Mustang Wide Vintage Solo Seat w/Removable Backrest: Manufacturer part # 79429 - Solo seat's skirt extends over frame and fender for a streamlined look. Steel base with support wings spans the width of the foam bucket. 15 in. wide. Backrest can be installed without tools; fold forward to mount bike. Backrest measures 7" high by 12" wide; four height adjustments for backrest; from 13 1/2" to 15 1/2" above seat. Leather-look vinyl covers. Made in the U.S.A.. Optional Wide Vintage recessed rear seat - Part no. 45-5195, , Dimensions: , Overall Length: 19-1/2 in., Drivers Seat: , Length: 13 in., Width: 14-1/2 in... 79429 1 on hand More Info/Options for Mustang Wide Vintage Solo Seat w/Removable Backrest 79429

$354.99 Dynojet Power Commander III USB with Oxygen Sensor Eliminators 812511 $354.99 Manufacturer: Dynojet Dennis Kirk Part #: 201976 Dynojet Power Commander III USB with Oxygen Sensor Eliminators: Manufacturer part # 812511 - Use of the USB (Universal Serial Bus) port connection provides an immediate, problem-free connection from your Power Commander to a computer. Perfect for fine-tuning fuel-injected motorcycles when changing air filters, exhaust systems, or doing additional engine performance modifications. Each Power Commander unit has a built-in microprocessor and comes with a specific map designed to improve engine performance over stock. If you do not have a computer, simply change the settings with the three touch buttons on the faceplate. Includes OEM-style wiring harness connectors that have improved harness protection; no modifications required. Easy-to-follow instructions provided. Power Commander III USB uses direct injector control technology to control the fuel curve for models that do not have sensors that allow sufficient fuel adjustment. Power Commander III USB also includes an expansion port to incorporate future add-on modules from Dynojet. Dynojet is continuously mapping different combinations for each bike; the special maps can be downloaded at Dynojet's website (www.powercommander.com). PCIII USB software is compatible with Windows 98se/ME/2000/XP; opens all maps with .djm extension. Includes USB communications cable and 9V power adapter. Made in the U.S.A... 812511 2 on hand More Info/Options for Dynojet Power Commander III USB with Oxygen Sensor Eliminators 812511

$354.99 Wiseco High Performance Piston Kit SK1346 $354.99 Manufacturer: Wiseco Dennis Kirk Part #: SK1346 Wiseco High Performance Piston Kit: Manufacturer part # SK1346 - Wiseco forged pistons are superior in strength and design. Engineered to provide the best possible path for combustion chamber heat transfer to cylinder walls. Elliptically designed to provide a more uniform bearing surface under piston heat expansion, eliminating localized pressure and distributing thrust loads more evenly, thereby preventing piston collapse. Kit includes forged pistons, rings, circlips, wrist pins and top end gasket set.. SK1346 Expected Soon More Info/Options for Wiseco High Performance Piston Kit SK1346

$354.99 LePera Silhouette Smooth Full Length Seat with Biker Gel SMOOTH GEL $354.99 Manufacturer: LePera Dennis Kirk Part #: 453260 LePera Silhouette Smooth Full Length Seat with Biker Gel: Manufacturer part # SMOOTH GEL - Motorcycle seats are a riders, best friend or worst enemy. There is no in-between area. Sculptured one-piece molded foam foundation with a top-grade vinyl cover in a smooth design. Baseplates are powder-coated steel carpeted to protect painted surfaces. Full-length versions. Includes Biker Gel. Made in the U.S.A.. , Dimensions: , Overall Length: 29 in., Drivers Seat: Length: 12 in., Width: 12-1/2 in., Backrest Height: 8-1/2 in., Passenger Seat: Length: 11 in., Width: 7 in.. SMOOTH GEL 2 on hand More Info/Options for LePera Silhouette Smooth Full Length Seat with Biker Gel SMOOTH GEL

$354.99 LePera Full-Length Silhouette Series Seat w/Biker Gel SILLHOUETTE $354.99 Manufacturer: LePera Dennis Kirk Part #: H39349 LePera Full-Length Silhouette Series Seat w/Biker Gel: Manufacturer part # SILLHOUETTE - Motorcycle seats are a riders, best friend or worst enemy. There is no in-between area. Sculptured one-piece molded-foam foundation with a top-grade vinyl cover in a smooth design. Base plates are powder-coated steel carpeted to protect painted surfaces. Made in the U.S.A.. , Dimensions: , Overall Length: 29 in., Drivers Seat: Length: 17 in., Width: 12 in., Backrest Height: 5 in., Passenger Seat: Length: 12 in., Width: 8 in.. SILLHOUETTE 1 on hand More Info/Options for LePera Full-Length Silhouette Series Seat w/Biker Gel SILLHOUETTE

$354.99 Wiseco Piston Kit- 2 Cylinder SK1319 $354.99 Manufacturer: Wiseco Dennis Kirk Part #: SK1319 Wiseco Piston Kit- 2 Cylinder: Manufacturer part # SK1319 - Wiseco Piston Inc. is a World Class manufacturer of hi-performance, forged pistons for the snowmobile, motorcycle, ATV and personal watercraft market. Wisecos pistons are the perfect fit between technology and performance. Extensive R and D test programs and advanced manufacturing techniques add up to performance and proven dependability. With a squeeze of the throttle you will experience the acceleration and torque that puts you in the lead while others can only follow. Sold complete with matched and balanced pistons, rings, wrist pins, circlips and top end gasket kit.. SK1319 Expected Soon More Info/Options for Wiseco Piston Kit- 2 Cylinder SK1319

$354.99 D & M Custom Cycle Diamond Cut 360 Degree Cone for Bullet Air Cleaner Kit DM200RDC $354.99 Manufacturer: D & M Custom Cycle Dennis Kirk Part #: 492770 D & M Custom Cycle Diamond Cut 360 Degree Cone for Bullet Air Cleaner Kit: Manufacturer part # DM200RDC - Replacement or optional cone for Bullet Air Cleaner. Fits the following Bullet Air Cleaners : H180086. H180085. 492749. 492750. 492751. 492752. 492753. 492756. 492758. 492759. 492760. H180084. 492754. 492755. 492761. 492762. DM200RDC 1 on hand More Info/Options for D & M Custom Cycle Diamond Cut 360 Degree Cone for Bullet Air Cleaner Kit DM200RDC

$354.99 Andrews Gear Driven 59HG Grind Cam 216359G $354.99 Manufacturer: Andrews Dennis Kirk Part #: 140114 Andrews Gear Driven 59HG Grind Cam: Manufacturer part # 216359G - Gear-Driven Cams Eliminate cam chain entirely with complete gear-driven components. Andrews Products designs and grinds its cams using the latest in CAD programming and CNC manufacturing. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel billets and heat treating processes are used. The power in Harley's Twin Cam engine can be made even more formidable with superior Andrews computer-designed high performance cams, , NOTE: Will require the purchase of a gear set (sold separately) for installation - Part No. 140059 , , 59HG GRIND CAMS INFORMATION: For 95 in.+ motors with 10:1 compression ratio or higher. Maximum torque and HP at middle and upper rpm ranges (2400-6200 rpm). Coil bind must be checked, but can use stock tappets. INTAKE: Opens: 29 degrees. Closes: 57 degrees. Duration @ .053: 266 degrees. Duration @ .020: 303 degrees. Valve Lift: .590. Lift TDC: .238. EXHAUST: Opens: 63 degrees. Closes: 27 degrees. Duration @ .053: 270 degrees. Duration @ .020: 307 degrees. Valve Lift: .590. Lift TDC: .218.. 216359G 1 on hand More Info/Options for Andrews Gear Driven 59HG Grind Cam 216359G

$354.99 Cycle Shack 1 3/4 in. Turnout M Pipe Exhaust System PHD135 TO $354.99 Manufacturer: Cycle Shack Dennis Kirk Part #: 4402296 Cycle Shack 1 3/4 in. Turnout M Pipe Exhaust System: Manufacturer part # PHD135 TO - Traditional style chrome "M" pipes are made of one continuous piece of 16-gauge tubing. All pipes have 2 1/2" muffler bodies and come with removable baffles (except tapered and turn-out styles). 1 3/4" pipes accept OEM or Cycle Shack heat shields. Come complete with all necessary mounting hardware; gaskets not included. Turn-out tip. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing... PHD135 TO 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Turnout M Pipe Exhaust System PHD135 TO

$354.99 Cobra Slash-Cut Tips Exhaust System 4164SC $354.99 Manufacturer: Cobra Dennis Kirk Part #: 444828 Cobra Slash-Cut Tips Exhaust System: Manufacturer part # 4164SC - All Cobra Boulevard exhaust systems are designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands, and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Made from high-grade steel and durable chrome plating. Better sound and style, with larger and longer muffler bodies than many competitors. Complete systems also include headpipes. All muffled systems feature 2 1/2 in. staggered duals; all systems exit on the right-hand side of the motorcycle. Re-jetting recommended for best performance on carbureted models; a Power Commander should be installed on fuel-injected models. Baffles are nonremovable. Full length heat shields included, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 4164SC 1 on hand More Info/Options for Cobra Slash-Cut Tips Exhaust System 4164SC

$354.99 Andrews Gear Driven 64HG Grind Cam 216364G $354.99 Manufacturer: Andrews Dennis Kirk Part #: 140116 Andrews Gear Driven 64HG Grind Cam: Manufacturer part # 216364G - Gear-Driven Cams Eliminate cam chain entirely with complete gear-driven components. Andrews Products designs and grinds its cams using the latest in CAD programming and CNC manufacturing. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel billets and heat treating processes are used. The power in Harley's Twin Cam engine can be made even more formidable with superior Andrews computer-designed high performance cams, , NOTE: Will require the purchase of a gear set (sold separately) for installation - Part No. 140059 , , 64HG GRIND CAMS INFORMATION: For 95 in.+ motors with 10:1 compression ratio or higher. Heads must be set up for .700 lift cams and flowed for peak airflow. Make maximum torque and HP at upper rpm (3000-6500 rpm). Coil bind must be checked, but can use stock tappets. INTAKE: Opens: 30 degrees. Closes: 62 degrees. Duration @ .053: 272 degrees. Duration @ .020: 307 degrees. Valve Lift: .640. Lift TDC: .262. EXHAUST: Opens: 68 degrees. Closes: 32 degrees. Duration @ .053: 276 degrees. Duration @ .020: 312 degrees. Valve Lift: .640. Lift TDC: .232.. 216364G 1 on hand More Info/Options for Andrews Gear Driven 64HG Grind Cam 216364G

$354.99 Dynojet Power Commander III USB 819511 $354.99 Manufacturer: Dynojet Dennis Kirk Part #: 202463 Dynojet Power Commander III USB: Manufacturer part # 819511 - Use of the USB (Universal Serial Bus) port connection provides an immediate, problem-free connection from your Power Commander to a computer. Perfect for fine-tuning fuel-injected motorcycles when changing air filters, exhaust systems, or doing additional engine performance modifications. Each Power Commander unit has a built-in microprocessor and comes with a specific map designed to improve engine performance over stock. If you do not have a computer, simply change the settings with the three touch buttons on the faceplate. Includes OEM-style wiring harness connectors that have improved harness protection; no modifications required. Easy-to-follow instructions provided. Power Commander III USB uses direct injector control technology to control the fuel curve for models that do not have sensors that allow sufficient fuel adjustment. Power Commander III USB also includes an expansion port to incorporate future add-on modules from Dynojet. Dynojet is continuously mapping different combinations for each bike; the special maps can be downloaded at Dynojet's website (www.powercommander.com). PCIII USB software is compatible with Windows 98es/ME/2000/XP; opens all maps with .djm extension. Includes USB communications cable and 9V power adapter. Made in the U.S.A... 819511 1 on hand More Info/Options for Dynojet Power Commander III USB 819511

$353.99 Carlini 1 1/2 in. Slickback Bar SB1.50 $353.99 Manufacturer: Carlini Dennis Kirk Part #: 594297 Carlini 1 1/2 in. Slickback Bar: Manufacturer part # SB1.50 - Precision manufactured, 1 1/2 in. diameter chrome-plated tee bars. Both bars are pre-dimpled and pre-drilled for internal wiring. Easy installation with rope routed through wiring passages on Slickback bar. 1/2 in.-13 threads on 3 1/2 in. centers. Made in the U.S.A.. ., , NOTE: Will not fit Touring 08-09 models. SB1.50 Expected Soon More Info/Options for Carlini 1 1/2 in. Slickback Bar SB1.50

$353.99 Leo Vince SBK Stainless Oval Slip-On With Aluminum Muffler Sleeve 7266 $353.99 Manufacturer: Leo Vince Dennis Kirk Part #: 4400910 Leo Vince SBK Stainless Oval Slip-On With Aluminum Muffler Sleeve: Manufacturer part # 7266 - Specifically designed to boost torque and horsepower across the rpm range while producing a rich exhaust note. Slip-ons feature stainless steel mid-pipe. TIG-welded stainless steel AISI 304 muffler body and fittings. polished aluminum alloy muffler sleeve. Include aluminum alloy mounting strap and frame attachment brackets. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. 7266 1 on hand More Info/Options for Leo Vince SBK Stainless Oval Slip-On With Aluminum Muffler Sleeve 7266

$353.99 Mustang One-Piece Ultra Regal Touring Seat w/Studs 75570 $353.99 Manufacturer: Mustang Dennis Kirk Part #: 455154 Mustang One-Piece Ultra Regal Touring Seat w/Studs: Manufacturer part # 75570 - Well-designed narrow seat nose makes for ultra-comfortable riding and less strain on knees. Optional driver backrest kits are available, use part number 393309. , Dimensions: , Overall Length: 34 in., Drivers Seat: Length: 16-1/2 in., Width: 19 in., Backrest Height: 5 in., Passenger Seat: Length: 14 in., Width: 16 in.. 75570 2 on hand More Info/Options for Mustang One-Piece Ultra Regal Touring Seat w/Studs 75570

$353.99 Mustang One-Piece Ultra Regal Touring Seat w/Black Studs 76204 $353.99 Manufacturer: Mustang Dennis Kirk Part #: 455514 Mustang One-Piece Ultra Regal Touring Seat w/Black Studs: Manufacturer part # 76204 - These touring seats are the ultimate in design and cushioning. Top covering made of highest-quality expanded vinyl. Nose is narrower than stock; allows for optimum rider comfort and less knee bend. 17 in. front width; 14 in. rear width. Made in the U.S.A... 76204 1 on hand More Info/Options for Mustang One-Piece Ultra Regal Touring Seat w/Black Studs 76204

$353.99 Leo Vince SBK Stainless High Mount Oval Slip-On With Aluminum Muffler Sleeve 7518 $353.99 Manufacturer: Leo Vince Dennis Kirk Part #: 4400924 Leo Vince SBK Stainless High Mount Oval Slip-On With Aluminum Muffler Sleeve: Manufacturer part # 7518 - Specifically designed to boost torque and horsepower across the rpm range while producing a rich exhaust note. Slip-ons feature stainless steel mid-pipe. TIG-welded stainless steel AISI 304 muffler body and fittings. Polished aluminum alloy muffler sleeve. Include aluminum alloy mounting strap and frame attachment brackets. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. 7518