|
|
$340.99
Yoshimura RS-3 Oval Race Slip-On with Polished Stainless Steel Muffler Sleeve 4402340
Dennis Kirk Part #: 4402340
Yoshimura RS-3 Oval Race Slip-On with Polished Stainless Steel Muffler Sleeve 4402340: Manufacturer part # 1126255 - Yoshimura is the largest sportbike aftermarket pipe manufacturer in the world. A convenient slip-on design featuring Yoshimura's racing technology. Tailpipes are 20-gauge stainless steel to reduce weight and boost power. Baffles are stainless steel 2in. or 2.25in. dia. race style. Quick-release exhaust canisters. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1126255
Expected Soon
More Info/Options for Yoshimura RS-3 Oval Race Slip-On with Polished Stainless Steel Muffler Sleeve 4402340
|
|
|
|
|
|
|
|
|
|
|
|
$340.00
Small Icon Domain II
Dennis Kirk Part #: 3302527S
Small Icon Domain II: Manufacturer part # 01013177 - Snell M2005 and DOT certified. Shell is carbon fiber/Dyneema/aramid for lightweight strength. More cooling power with an additional dorsal vent. Hot air exits out large rear exhaust ports. Chin curtain is removable. Bottom of helmet features unique air intake system. CoolMax liner is removable and washable. Fog-free eye shield with side plates can be quickly removed/installed. Fusion is a combination of a clear-coat technology and Icon's Rubatone finish that showcases its custom graphic helmets. Less fogging with removable breath deflector. Medium helmet weighs 3 lb., 13 oz.. Padded D-ring retention with anti-flutter snap. Ear cavities for comm speakers.. 01013177
1 on Hand
More Info/Options for Small Icon Domain II
|
|
|
|
$340.00
XX-Large Icon Domain Helmets
Dennis Kirk Part #: 3301437XXL
XX-Large Icon Domain Helmets: Manufacturer part # 01011721 - DOT and Snell M2005 approved. Carbon fiber, Dyneema, Aramid composite shell for strength. Additional dorsal vent for additional RAM-air induction. Large rear exhaust ports route hot air out of the helmet. Removable molded breath deflector reduces shield fogging. Removable chin curtain seals out unwanted turbulence. Unique bottom mounted chin air intake system. Quick change fog free eye shield. Padded D-ring retention chin strap Medium helmet wieghs 3lb., 10oz.. 01011721
1 on Hand
More Info/Options for XX-Large Icon Domain Helmets
|
|
|
|
|
|
$340.00
Large Icon Domain Helmets
Dennis Kirk Part #: 3301437L
Large Icon Domain Helmets: Manufacturer part # 01011719 - DOT and Snell M2005 approved. Carbon fiber, Dyneema, Aramid composite shell for strength. Additional dorsal vent for additional RAM-air induction. Large rear exhaust ports route hot air out of the helmet. Removable molded breath deflector reduces shield fogging. Removable chin curtain seals out unwanted turbulence. Unique bottom mounted chin air intake system. Quick change fog free eye shield. Padded D-ring retention chin strap Medium helmet wieghs 3lb., 10oz.. 01011719
6 on Hand
More Info/Options for Large Icon Domain Helmets
|
|
|
|
|
|
$340.00
X-Large Icon Domain Helmets
Dennis Kirk Part #: 3301437XL
X-Large Icon Domain Helmets: Manufacturer part # 01011720 - DOT and Snell M2005 approved. Carbon fiber, Dyneema, Aramid composite shell for strength. Additional dorsal vent for additional RAM-air induction. Large rear exhaust ports route hot air out of the helmet. Removable molded breath deflector reduces shield fogging. Removable chin curtain seals out unwanted turbulence. Unique bottom mounted chin air intake system. Quick change fog free eye shield. Padded D-ring retention chin strap Medium helmet wieghs 3lb., 10oz.. 01011720
2 on Hand
More Info/Options for X-Large Icon Domain Helmets
|
|
|
|
$340.00
X-Large Icon Domain II
Dennis Kirk Part #: 3302527XL
X-Large Icon Domain II: Manufacturer part # 01013180 - Snell M2005 and DOT certified. Shell is carbon fiber/Dyneema/aramid for lightweight strength. More cooling power with an additional dorsal vent. Hot air exits out large rear exhaust ports. Chin curtain is removable. Bottom of helmet features unique air intake system. CoolMax liner is removable and washable. Fog-free eye shield with side plates can be quickly removed/installed. Fusion is a combination of a clear-coat technology and Icon's Rubatone finish that showcases its custom graphic helmets. Less fogging with removable breath deflector. Medium helmet weighs 3 lb., 13 oz.. Padded D-ring retention with anti-flutter snap. Ear cavities for comm speakers.. 01013180
1 on Hand
More Info/Options for X-Large Icon Domain II
|
|
|
|
$340.00
Medium Icon Domain Helmets
Dennis Kirk Part #: 3301437M
Medium Icon Domain Helmets: Manufacturer part # 01011718 - DOT and Snell M2005 approved. Carbon fiber, Dyneema, Aramid composite shell for strength. Additional dorsal vent for additional RAM-air induction. Large rear exhaust ports route hot air out of the helmet. Removable molded breath deflector reduces shield fogging. Removable chin curtain seals out unwanted turbulence. Unique bottom mounted chin air intake system. Quick change fog free eye shield. Padded D-ring retention chin strap Medium helmet wieghs 3lb., 10oz.. 01011718
5 on Hand
More Info/Options for Medium Icon Domain Helmets
|
|
|
|
|
|
$340.00
X-Small Icon Domain Helmets
Dennis Kirk Part #: 3301437XS
X-Small Icon Domain Helmets: Manufacturer part # 01011716 - DOT and Snell M2005 approved. Carbon fiber, Dyneema, Aramid composite shell for strength. Additional dorsal vent for additional RAM-air induction. Large rear exhaust ports route hot air out of the helmet. Removable molded breath deflector reduces shield fogging. Removable chin curtain seals out unwanted turbulence. Unique bottom mounted chin air intake system. Quick change fog free eye shield. Padded D-ring retention chin strap Medium helmet wieghs 3lb., 10oz.. 01011716
1 on Hand
More Info/Options for X-Small Icon Domain Helmets
|
|
|
|
$340.00
XX-Large Icon Domain II
Dennis Kirk Part #: 3302527XXL
XX-Large Icon Domain II: Manufacturer part # 01013181 - Snell M2005 and DOT certified. Shell is carbon fiber/Dyneema/aramid for lightweight strength. More cooling power with an additional dorsal vent. Hot air exits out large rear exhaust ports. Chin curtain is removable. Bottom of helmet features unique air intake system. CoolMax liner is removable and washable. Fog-free eye shield with side plates can be quickly removed/installed. Fusion is a combination of a clear-coat technology and Icon's Rubatone finish that showcases its custom graphic helmets. Less fogging with removable breath deflector. Medium helmet weighs 3 lb., 13 oz.. Padded D-ring retention with anti-flutter snap. Ear cavities for comm speakers.. 01013181
1 on Hand
More Info/Options for XX-Large Icon Domain II
|
|
|
|
$340.00
Small Icon Domain Helmets
Dennis Kirk Part #: 3301437S
Small Icon Domain Helmets: Manufacturer part # 01011717 - DOT and Snell M2005 approved. Carbon fiber, Dyneema, Aramid composite shell for strength. Additional dorsal vent for additional RAM-air induction. Large rear exhaust ports route hot air out of the helmet. Removable molded breath deflector reduces shield fogging. Removable chin curtain seals out unwanted turbulence. Unique bottom mounted chin air intake system. Quick change fog free eye shield. Padded D-ring retention chin strap Medium helmet wieghs 3lb., 10oz.. 01011717
2 on Hand
More Info/Options for Small Icon Domain Helmets
|
|
|
|
$340.00
Medium Icon Domain II
Dennis Kirk Part #: 3302527M
Medium Icon Domain II: Manufacturer part # 01013178 - Snell M2005 and DOT certified. Shell is carbon fiber/Dyneema/aramid for lightweight strength. More cooling power with an additional dorsal vent. Hot air exits out large rear exhaust ports. Chin curtain is removable. Bottom of helmet features unique air intake system. CoolMax liner is removable and washable. Fog-free eye shield with side plates can be quickly removed/installed. Fusion is a combination of a clear-coat technology and Icon's Rubatone finish that showcases its custom graphic helmets. Less fogging with removable breath deflector. Medium helmet weighs 3 lb., 13 oz.. Padded D-ring retention with anti-flutter snap. Ear cavities for comm speakers.. 01013178
1 on Hand
More Info/Options for Medium Icon Domain II
|
|
|
|
$340.00
X-Small Icon Domain II
Dennis Kirk Part #: 3302527XS
X-Small Icon Domain II: Manufacturer part # 01013176 - Snell M2005 and DOT certified. Shell is carbon fiber/Dyneema/aramid for lightweight strength. More cooling power with an additional dorsal vent. Hot air exits out large rear exhaust ports. Chin curtain is removable. Bottom of helmet features unique air intake system. CoolMax liner is removable and washable. Fog-free eye shield with side plates can be quickly removed/installed. Fusion is a combination of a clear-coat technology and Icon's Rubatone finish that showcases its custom graphic helmets. Less fogging with removable breath deflector. Medium helmet weighs 3 lb., 13 oz.. Padded D-ring retention with anti-flutter snap. Ear cavities for comm speakers.. 01013176
1 on Hand
More Info/Options for X-Small Icon Domain II
|
|
|
|
$339.99
Dynojet Ignition Module 201394
Dennis Kirk Part #: 201394
Dynojet Ignition Module 201394: Manufacturer part # 609 - Tune each cylinder individually or advance or retard the ignition curve based on throttle position with this ignition module. Through a built-in expansion port link you can connect this ignition module to PCIII USB. Without splicing or cutting wires, connect the ignition coils through an intermediate harness connection or directly to the coil. Flexible timing adjustments are provided from the direct coil technology.. 609
1 on Hand
More Info/Options for Dynojet Ignition Module 201394
|
|
|
|
$339.99
Dynojet Ignition Module 201390
Dennis Kirk Part #: 201390
Dynojet Ignition Module 201390: Manufacturer part # 605 - Tune each cylinder individually or advance or retard the ignition curve based on throttle position with this ignition module. Through a built-in expansion port link you can connect this ignition module to PCIII USB. Without splicing or cutting wires, connect the ignition coils through an intermediate harness connection or directly to the coil. Flexible timing adjustments are provided from the direct coil technology.. 605
1 on Hand
More Info/Options for Dynojet Ignition Module 201390
|
|
|
|
|
|
$299.95
Cobra Drag Pipe Exhaust System 445307
Dennis Kirk Part #: 445307
Cobra Drag Pipe Exhaust System 445307: Manufacturer part # 2271 - All Cobra Boulevard exhaust systems are designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands, and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Made from high-grade steel and durable chrome plating. Better sound and style, with larger and longer muffler bodies than many competitors. Complete systems also include chrome headpipes. Drag systems exit on the right-hand side of the motorcycle. Slash-Cut Tip Drag Pipes are 2 in. diameter. All Cobra Boulevard Drag Pipes have removable baffles. Re-jetting recommended for best performance on carbureted models; a Power Commander should be installed on fuel-injected models. NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel Section.. Exhaust discoloration (bluing) is caused by engine conditions such a cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chemicals and Lubes section for products to help remove or prevent exhaust discoloration.. 2271
1 on Hand
More Info/Options for Cobra Drag Pipe Exhaust System 445307
|
|
|
|
|
|
