TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Yoshimura Tri-Oval Race (TRS) Slip-On Muffler w

$360.99 Thunder Cycle XL Velocity Stack For 80in. Evolution Heads With S&S E And G Series Carbs TC-731 $360.99 Manufacturer: Thunder Cycle Dennis Kirk Part #: 183348 Thunder Cycle XL Velocity Stack For 80in. Evolution Heads With S&S E And G Series Carbs: Manufacturer part # TC-731 - Chromed billet aluminum construction. 4in. open design. Comes with mounting bracket, mounting screws, and breathers; Internal screen not included. For screen order DK part no. 183347. TC-731 1 on hand More Info/Options for Thunder Cycle XL Velocity Stack For 80in. Evolution Heads With S&S E And G Series Carbs TC-731

$360.99 Scorpion Stainless Steel Slip-On Silencer DSKA 50 $360.99 Manufacturer: Scorpion Dennis Kirk Part #: 432489 Scorpion Stainless Steel Slip-On Silencer: Manufacturer part # DSKA 50 - Stainless steel slip-on silencer. Model specific design to bring out the best in your machine. Boost power throughout the rpm range and improve throttle response. No repacking or rejetting. Include removable, U.S.F.S. approved spark arrestor. INCLUDED ITEMS: One silencer. One 51-55mm band clamp. One 40-43mm band clamp. One TL type silencer strap. One protective rubber for silencer strap. One connecting pipe. One instruction sheet. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration .. DSKA 50 1 on hand More Info/Options for Scorpion Stainless Steel Slip-On Silencer DSKA 50

$360.99 Mustang One-Piece Ultra Regal Touring Seat w/Black Studs 75466 $360.99 Manufacturer: Mustang Dennis Kirk Part #: 453759 Mustang One-Piece Ultra Regal Touring Seat w/Black Studs: Manufacturer part # 75466 - Well-designed narrow seat nose makes for ultra-comfortable riding and less strain on knees. Leather-look vinyl covers. Made in the U.S.A.. Optional driver backrest kit, 39-3310. , Dimensions: , Overall Length: 31 in., Drivers Seat: Length: 15-1/2 in., Width: 17 in., Backrest Height: 4 in., Passenger Seat: Length: 13-1/4 in., Width: 14 in.. 75466 2 on hand More Info/Options for Mustang One-Piece Ultra Regal Touring Seat w/Black Studs 75466

$360.99 Pro-One Millennium Smooth 41mm Wide Glide Chrome Triple Trees 106110 $360.99 Manufacturer: Pro-One Dennis Kirk Part #: 582378 Pro-One Millennium Smooth 41mm Wide Glide Chrome Triple Trees: Manufacturer part # 106110 - Chrome billet aluminum 41mm Wide Glide triple trees. Smooth finish. Sold without integral turn signal indicators, , NOTE: No fork locking capabilities, , NOTE: Raked triple trees change the handling characteristics of the motorcycle. Steering geometry must be calculated to determine to which degree of rake is most suited for your application. Trees with more than 3 degrees of rake should not be used in stock frame applications. Not recommended for use on rubber mounted chassis.. 106110 1 on hand More Info/Options for Pro-One Millennium Smooth 41mm Wide Glide Chrome Triple Trees 106110

$360.99 Thunder Cycle 4X4 Velocity Stack for 80in. Evolution Heads With Mikuni Carbs TC-731M $360.99 Manufacturer: Thunder Cycle Dennis Kirk Part #: 183349 Thunder Cycle 4X4 Velocity Stack for 80in. Evolution Heads With Mikuni Carbs: Manufacturer part # TC-731M - Chromed billet aluminum. Features an extra-wide intake.. TC-731M 1 on hand More Info/Options for Thunder Cycle 4X4 Velocity Stack for 80in. Evolution Heads With Mikuni Carbs TC-731M

$360.99 Vance & Hines Classic II Staggered Dual Exhaust System 19361 $360.99 Manufacturer: Vance & Hines Dennis Kirk Part #: 445226 Vance & Hines Classic II Staggered Dual Exhaust System: Manufacturer part # 19361 - For the ultimate in sound, power and performance for your import cruiser, look to Vance & Hines. The beautiful chrome finish and incredible attention to detail put these pipes in a class by themselves. Unbelievably perfect fit right out of the box - bolt em on and RUMBLE. Each system comes with chrome plated, custom 220º plasma-arc cut full-length heat shields to hide any possible bluing. This includes round steel silencer. New removable steel baffle/slash-cut end cap combination. These pipes perform - increase your throttle response, fuel economy and horsepower. Complete with all necessary mounting hardware and instructions. Carburetor re-jetting or a Vance & Hines Power Commander may be necessary for optimum performance, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 19361 1 on hand More Info/Options for Vance & Hines Classic II Staggered Dual Exhaust System 19361

$360.99 Scorpion Stainless Steel Slip-On Silencer DSYA 51 $360.99 Manufacturer: Scorpion Dennis Kirk Part #: 432497 Scorpion Stainless Steel Slip-On Silencer: Manufacturer part # DSYA 51 - Stainless steel slip-on silencer. Model specific design to bring out the best in your machine. Boost power throughout the rpm range and improve throttle response. No repacking or rejetting. Include removable, U.S.F.S. approved spark arrestor. Stainless steel head pipe available for an easy upgrade to a full system, order Part no. 43-2503. INCLUDED ITEMS: One slip on silencer. One 51-55mm band clamp. One 43-47mm band clamp. Two M8 washers. Two 10mm aluminum spacers. One M8 x 20mm cap head bolt. One M8 x 35mm cap head bolt One H type silencer strap. One protective rubber for silencer strap. One connecting pipe. One instruction sheet. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration .. DSYA 51 1 on hand More Info/Options for Scorpion Stainless Steel Slip-On Silencer DSYA 51

$360.99 Yoshimura Tri-Oval Race (TRS) Slip-On Muffler w/Polished Stainless Steel Muffler Sleeve 1311265 $360.99 Manufacturer: Yoshimura Dennis Kirk Part #: 431295 Yoshimura Tri-Oval Race (TRS) Slip-On Muffler w/Polished Stainless Steel Muffler Sleeve: Manufacturer part # 1311265 - A convenient slip-on muffler package with the TRS race exhaust features. Tested and developed with the help of three-time AMA Superbike Champion Mat Mladin. Tri-oval muffler shape gives you maximum cornering clearance, unique looks and a distinctive sound. Stainless steel race baffle is large 2 in. or 2.25 in. diameter for maximum exhaust gas flow. , NOTE:, Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product, , NOTE:, Exhaust discoloration (blueing) is caused by engine conditions such a cam timing, fuel-air mixture, operating temperaturem etc. It is not the result of defective manufacturing, therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. 1311265 1 on hand More Info/Options for Yoshimura Tri-Oval Race (TRS) Slip-On Muffler w/Polished Stainless Steel Muffler Sleeve 1311265

$360.99 Pro-One Black Anodized Millennium Triple Tree 106110B $360.99 Manufacturer: Pro-One Dennis Kirk Part #: 582711 Pro-One Black Anodized Millennium Triple Tree: Manufacturer part # 106110B - Smooth without integral turn signal indicators. 41mm Wide Glide triple tree. , , NOTE: This item ships 3 or 4 days after the order is placed, , NOTE: No fork locking capabilities, , NOTE: Raked triple trees change the handling characteristics of the motorcycle. Steering geometry must be calculated to determine to which degree of rake is most suited for your application. Trees with more than 3 degrees of rake should not be used in stock frame applications. Not recommended for use on rubber mounted chassis. 106110B 1 on hand More Info/Options for Pro-One Black Anodized Millennium Triple Tree 106110B

$360.99 Daytona Twin Tec External Module Ignition Kit 3005S $360.99 Manufacturer: Daytona Twin Tec Dennis Kirk Part #: H20895 Daytona Twin Tec External Module Ignition Kit: Manufacturer part # 3005S - Kits include ignition module, single-fire coil, 8.5mm spark plug wires and instructions. Two advance curve families with adjustable advance curves to accommodate stock to wild engine modifications. Unit has four rotary switches for adjusting timing, single/dual fire, rpm limit and two LED indicator lights. Digitally set rpm limit (in 100-rpm steps); selectable single- or dual-fire mode. Selectable multi-spark mode for quick starting and smooth cruising. Coil outputs protected against short circuits. Uses the tachometer wire for the PC link and comes with a connector. Made in the U.S.A.. Optional software available for programming custom curves, programs available at (www.daytona-twintec.com). 3005S 1 on hand More Info/Options for Daytona Twin Tec External Module Ignition Kit 3005S

$360.99 Roadhouse 4 Inch Slip-Ons p4401073 $360.99 Manufacturer: Roadhouse Dennis Kirk Part #: 4402393 Roadhouse 4 Inch Slip-Ons: Manufacturer part # p4401073 - Dynamometer tested for superior performance, 5-10 percent horsepower increase. Deep meaty rumble without being overly loud. Slip fit 4 inch diameter muffler canister with polished chrome finish and interchangeable tips. Removable 2 inch core with high temperature fiber packing. Include detailed instructions and mounting hardware, , Included Items: , (1) Installation Sheet, (1) Slip-on Muffler, (2) 10mm x 1.5 flange nuts, (1) 2 in. Heavy Duty Hose Clamp, , Optional/Replacement Tips: Shark fin - part no. 449703 Cadilac - part no. 449704 Repl. standard - part no. 449705. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. p4401073 1 on hand More Info/Options for Roadhouse 4 Inch Slip-Ons p4401073

$360.99 Leo Vince SBK Oval Evo II Stainless Slip On Muffler With Aluminum Canister 6718 $360.99 Manufacturer: Leo Vince Dennis Kirk Part #: 4402939 Leo Vince SBK Oval Evo II Stainless Slip On Muffler With Aluminum Canister: Manufacturer part # 6718 - Low-decibel exhaust note -- without sacrificing performance. Slip-on mufflers feature stainless steel mid-pipe. TIG-welded stainless steel AISI 304 muffler body and fittings. Brushed aluminum muffler bodies. Aluminum alloy mounting strap and frame attachment brackets. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 6718 Expected Soon More Info/Options for Leo Vince SBK Oval Evo II Stainless Slip On Muffler With Aluminum Canister 6718

$360.99 Daytona Twin Tec External Module Ignition Kit 3006 $360.99 Manufacturer: Daytona Twin Tec Dennis Kirk Part #: H20896 Daytona Twin Tec External Module Ignition Kit: Manufacturer part # 3006 - Kits include ignition module, single-fire coil, 8.5mm spark plug wires and instructions. Two advance curve families with adjustable advance curves to accommodate stock to wild engine modifications. Unit has four rotary switches for adjusting timing, single/dual fire, rpm limit and two LED indicator lights. Digitally set rpm limit (in 100-rpm steps); selectable single- or dual-fire mode. Selectable multi-spark mode for quick starting and smooth cruising. Coil outputs protected against short circuits. Uses the tachometer wire for the PC link and comes with a connector. Made in the U.S.A.. 7-pin cannon plug. 3006 Expected Soon More Info/Options for Daytona Twin Tec External Module Ignition Kit 3006

$360.99 Saddlemen SaddleHyde King Seat w/o Driver Backrest 08020316 $360.99 Manufacturer: Saddlemen Dennis Kirk Part #: 454261 Saddlemen SaddleHyde King Seat w/o Driver Backrest: Manufacturer part # 08020316 - Luxurious driver and passenger comfort with unsurpassed back support for driver and thick, comfortable pad for passenger. SaddleGel pad in driver's portion provides even weight distribution. Removable/adjustable optional driver's backrest; vertical adjustments are made via a spring detent in the backrest bar and horizontal adjustments (fore-aft) are made with a thumbscrew. Choose seat with either soft touch SaddleHyde or leather cover (as noted) Made in the U.S.A.. , , Dimensions: , Overall Seat Length: 30 in., Drivers Seat: Length: 19 in., Width: 13-1/2 in., Backrest Height: 9 in., Passenger Seat: Length: 11 in., Width: 7 in.. 08020316 2 on hand More Info/Options for Saddlemen SaddleHyde King Seat w/o Driver Backrest 08020316

$360.99 Scorpion Stainless Steel Slip-On Silencer DSYA 52 $360.99 Manufacturer: Scorpion Dennis Kirk Part #: 432499 Scorpion Stainless Steel Slip-On Silencer: Manufacturer part # DSYA 52 - Stainless steel slip-on silencer. Model specific design to bring out the best in your machine. Boost power throughout the rpm range and improve throttle response. No repacking or rejetting. Include removable, U.S.F.S. approved spark arrestor. INCLUDED ITEMS: One slip on silencer. One 51-55mm band clamp. One 43-47mm band clamp. Two m8 washers. Two 10mm aluminum spacers. One m8 x 20mm cap head bolt. One m8 x 35mm cap head bolt. One H type silencer strap. One protective rubber for silencer strap. One connecting pipe. One instruction sheet.. DSYA 52 1 on hand More Info/Options for Scorpion Stainless Steel Slip-On Silencer DSYA 52

$360.99 Leo Vince SBK Stainless Oval Slip-On With Aluminum Muffler Sleeve 6352 $360.99 Manufacturer: Leo Vince Dennis Kirk Part #: 4400929 Leo Vince SBK Stainless Oval Slip-On With Aluminum Muffler Sleeve: Manufacturer part # 6352 - Specifically designed to boost torque and horsepower across the rpm range while producing a rich exhaust note. Slip-ons feature stainless steel mid-pipe. TIG-welded stainless steel AISI 304 muffler body and fittings. Polished aluminum muffler sleeve. Include aluminum alloy mounting strap and frame attachment brackets. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 6352 1 on hand More Info/Options for Leo Vince SBK Stainless Oval Slip-On With Aluminum Muffler Sleeve 6352

$360.99 Works Performance A-T Steeler Shocks w/Single-Rate Spring p587985 $360.99 Manufacturer: Works Performance Dennis Kirk Part #: 587985 Works Performance A-T Steeler Shocks w/Single-Rate Spring: Manufacturer part # p587985 - Recreational riding type Get custom-built, state-of-the-art, totally rebuildable shocks for your four-wheeler without the usual wait. Whether you are a pro motocrosser or weekend warrior, Works Performance shocks for ATVs deliver maximum performance and durability. Unlike mass-produced shocks, Works builds shocks for specific types of riding and rider weight to deliver the best possible handling. In virtually all cases, shocks are designed to produce the maximum wheel travel available with the stock suspension design; as well as with extended A-arms. Backed by a manufacturers 30 day performance guarantee and a 90 day warranty against any failure due to workmanship or materials; except UltraCross single rear shocks which include a one year warranty. Includes Single-Rate Springs. Available in pairs. A-T Steelers feature adjustable spring pre-load, 1/2 in. hard-chromed steel shafts and 1 3/8 in. diameter pistons with six-stage damping. Sprin