Yoshimura Tri-Oval Race (TRS) Slip-On Muffler w

This site contains about 139,777 documents.

View by:

Page: 1 100 250 260 270 280 290 300 310 320 330 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 370 380 390 400 410 420 430 440 500 600 700 800 900 1,000 1,100 1,200 1,300 2,000 3,000 4,000 4,660

$360.99 Leo Vince SBK Aluminum EVO II Muffler 7584 $360.99
Manufacturer: Leo Vince
Dennis Kirk Part #: 4401139
Leo Vince SBK Aluminum EVO II Muffler: Manufacturer part # 7584 - The same quality and performance as Leo Vinces racing mufflers but with a more streetable exhaust note. Noise reducer in muffler outlet keeps sound down without restricting performance. Slip-on mufflers feature stainless steel mid-pipe. Muffler body and fittings are TIG-welded stainless steel AISI 304. Brushed aluminum, glossy carbon fiber or satin-finish titanium muffler bodies available. Mounting strap and frame attachment brackets are aluminum alloy. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 7584
1 on hand

More Info/Options for Leo Vince SBK Aluminum EVO II Muffler 7584

$360.99 Leo Vince SBK Oval Evo II Stainless Slip On Muffler With Aluminum Canister 6718 $360.99
Manufacturer: Leo Vince
Dennis Kirk Part #: 4402939
Leo Vince SBK Oval Evo II Stainless Slip On Muffler With Aluminum Canister: Manufacturer part # 6718 - Low-decibel exhaust note -- without sacrificing performance. Slip-on mufflers feature stainless steel mid-pipe. TIG-welded stainless steel AISI 304 muffler body and fittings. Brushed aluminum muffler bodies. Aluminum alloy mounting strap and frame attachment brackets. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 6718
Expected Soon

More Info/Options for Leo Vince SBK Oval Evo II Stainless Slip On Muffler With Aluminum Canister 6718

$360.99 Yoshimura Tri-Oval Race (TRS) Slip-On Muffler w/Polished Stainless Steel Muffler Sleeve 1320265 $360.99
Manufacturer: Yoshimura
Dennis Kirk Part #: 447307
Yoshimura Tri-Oval Race (TRS) Slip-On Muffler w/Polished Stainless Steel Muffler Sleeve: Manufacturer part # 1320265 - A convenient slip-on muffler package with the TRS race exhaust features. Tested and developed with the help of three-time AMA Superbike Champion Mat Mladin. Tri-oval muffler shape gives you maximum cornering clearance, unique looks and a distinctive sound. Stainless steel race baffle is large 2 in. or 2.25 in. diameter for maximum exhaust gas flow. Muffler is quick-release polished stainless steel, , NOTE: , Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product., , NOTE: , Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1320265
Expected Soon

More Info/Options for Yoshimura Tri-Oval Race (TRS) Slip-On Muffler w/Polished Stainless Steel Muffler Sleeve 1320265

$360.99 Alloy Art 4 1/2 in. Martini Light p213994 $360.99
Manufacturer: Alloy Art
Dennis Kirk Part #: 213994
Alloy Art 4 1/2 in. Martini Light: Manufacturer part # p213994 - Feature original, unequaled style and design. CNC-machined aluminum bucket and bezel. 3-D CNC-machined mount. Includes a high-quality 12V sealed beam lamp. Available in 4.5" and 5.75" diameter in chrome, black-anodized or raw finish. Made in the U.S.A... p213994
1 on hand

More Info/Options for Alloy Art 4 1/2 in. Martini Light p213994

$360.99 Daytona Twin Tec External Module Ignition Kit 3007 $360.99
Manufacturer: Daytona Twin Tec
Dennis Kirk Part #: H20898
Daytona Twin Tec External Module Ignition Kit: Manufacturer part # 3007 - Kits include ignition module, single-fire coil, 8.5mm spark plug wires and instructions. Two advance curve families with adjustable advance curves to accommodate stock to wild engine modifications. Unit has four rotary switches for adjusting timing, single/dual fire, rpm limit and two LED indicator lights. Digitally set rpm limit (in 100-rpm steps); selectable single- or dual-fire mode. Selectable multi-spark mode for quick starting and smooth cruising. Coil outputs protected against short circuits. Uses the tachometer wire for the PC link and comes with a connector. Made in the U.S.A.. 8-pin Deutsch plug. 3007
Expected Soon

More Info/Options for Daytona Twin Tec External Module Ignition Kit 3007

$360.99 Dynojet Power Commander III USB with Oxygen Sensor Eliminators 818511 $360.99
Manufacturer: Dynojet
Dennis Kirk Part #: 202462
Dynojet Power Commander III USB with Oxygen Sensor Eliminators: Manufacturer part # 818511 - Use of the USB (Universal Serial Bus) port connection provides an immediate, problem-free connection from your Power Commander to a computer. Perfect for fine-tuning fuel-injected motorcycles when changing air filters, exhaust systems, or doing additional engine performance modifications. Each Power Commander unit has a built-in microprocessor and comes with a specific map designed to improve engine performance over stock. If you do not have a computer, simply change the settings with the three touch buttons on the faceplate. Includes OEM-style wiring harness connectors that have improved harness protection; no modifications required. Easy-to-follow instructions provided. Power Commander III USB uses direct injector control technology to control the fuel curve for models that do not have sensors that allow sufficient fuel adjustment. Power Commander III USB also includes an expansion port to incorporate future add-on modules from Dynojet. Dynojet is continuously mapping different combinations for each bike; the special maps can be downloaded at Dynojet's website (www.powercommander.com). PCIII USB software is compatible with Windows 98es/ME/2000/XP; opens all maps with .djm extension. Includes USB communications cable and 9V power adapter. Made in the U.S.A.. , , Included Items , (1) Power Commander, (1) USB Cable, (1) CD-Rom, (1) Installation Guide, (1) Power Adapter, (2) Power Commander Decals, (2) Dynojet Decals, (2) O2 Eliminators, (1) Zip Tie, (2) Vecro Strips, (1) Alcohol Swab. 818511
3 on hand

More Info/Options for Dynojet Power Commander III USB with Oxygen Sensor Eliminators 818511

$360.99 Yoshimura Tri-Oval Race (TRS) Slip-On Muffler w/Polished Stainless Steel Muffler Sleeve 1112265 $360.99
Manufacturer: Yoshimura
Dennis Kirk Part #: 4400535
Yoshimura Tri-Oval Race (TRS) Slip-On Muffler w/Polished Stainless Steel Muffler Sleeve: Manufacturer part # 1112265 - A convenient slip-on muffler package with the TRS race exhaust features. Tested and developed with the help of three-time AMA Superbike Champion Mat Mladin. Tri-oval muffler shape gives you maximum cornering clearance, unique looks and a distinctive sound. Stainless steel race baffle is large 2 in. or 2.25 in. diameter for maximum exhaust gas flow. Quick-release. , INCLUDED ITEMS: , (1) Stainless steel race tailpipe, (1) TRS tri-oval muffler assembly, (1) Muffler clamp, (2) 2 1/2 in. exhaust spring, (1) Securing rivet, (1) 2 1/2 in. exhaust clamp, (1) Muffler clamp heat insulator, (2) Vinyl stickers, (1) Instruction sheet. . , Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. 1112265
1 on hand

More Info/Options for Yoshimura Tri-Oval Race (TRS) Slip-On Muffler w/Polished Stainless Steel Muffler Sleeve 1112265

$360.99 Diamond Engineering The Groove Stainless Steel Custom Transformation Kit for Screamin' Eagle p272151 $360.99
Manufacturer: Diamond Engineering
Dennis Kirk Part #: 272149
Diamond Engineering The Groove Stainless Steel Custom Transformation Kit for Screamin' Eagle: Manufacturer part # p272151 - Kits include a dozen groups of polished fasteners so you can give your bike a custom look without having to completely disassemble it. Kits include fasteners for the engine, transmission and the most visible areas of the motorcycle. Fits FLHT/FLHR Screamin' Eagle 110" 07-08. Fasteners included in kits for primary, inspections and inner primary; cam and points; oil pump or oil line cover, filter mount and sensors (Dyna and Twin Cam FLH) or oil filter plugs and sensors (Twin Cam Softail); lifter blocks; rocker box; coil and circuit breaker covers (Dyna); transmission side cover; oil filler (FLH models); transmission top cover; handlebar clamp, switch housings and master cylinder; front fender or front fender trim and fuel tank (FLH models); rear fender rail or swingarm pivot blocks and rear floorboard brackets (FLH models); and side covers (FXR).. p272151
1 on hand

More Info/Options for Diamond Engineering The Groove Stainless Steel Custom Transformation Kit for Screamin' Eagle p272151

$360.99 Mac 4-into-2 Chrome Megaphone Exhaust System 0012609 $360.99
Manufacturer: Mac
Dennis Kirk Part #: 43516
Mac 4-into-2 Chrome Megaphone Exhaust System: Manufacturer part # 0012609 - Economical replacement exhaust systems for 69 thru early 80s Japanese in-line fours. Performance and the sound of power for those who prefer the balanced look of dual mufflers. Retains all convenience features, including centerstand, oil filter and drain plug access. Plenty of room for saddlebags. Durable, dual nickel, all-chrome finish in a variety of muffler styles. All megaphone style have removable baffles and are fiberglass wrapped, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 0012609
1 on hand

More Info/Options for Mac 4-into-2 Chrome Megaphone Exhaust System 0012609

$360.99 Leo Vince SBK Oval EVO II Stainless Slip-On with Aluminum Muffler Sleeve 7967 $360.99
Manufacturer: Leo Vince
Dennis Kirk Part #: 4402922
Leo Vince SBK Oval EVO II Stainless Slip-On with Aluminum Muffler Sleeve: Manufacturer part # 7967 - Low-decibel exhaust note -- without sacrificing performance. Slip-on mufflers feature stainless steel mid-pipe; bolt-ons feature machined-from-aluminum muffler flange that attaches directly to the OEM header pipe. TIG-welded stainless steel AISI 304 muffler body and fittings. Brushed aluminum muffler body. Aluminum alloy mounting strap and frame attachment brackets. , , Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available, , Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. , , Included Items:. , 1. (1) Silencer. , 2. (1) Mid-pipe. , 3. (1) Exhaust clamp. , 4. (1) Wxhaust hanger. , 5. (1) Spring. , 6. (1) 8mm x 23mm shouldered spacer. , 7. (1) 8mm-1.25 x 50mm allen head bolt. , 8. (1) 8mm-1.25 nut. , 9. (1) 8mm shouldered washer. , 10. (1) Spring helper.. 7967
1 on hand

More Info/Options for Leo Vince SBK Oval EVO II Stainless Slip-On with Aluminum Muffler Sleeve 7967

$360.99 JIMS Oil Pump with Bottom Feed/Return Oil Lines 1755 $360.99
Manufacturer: JIMS
Dennis Kirk Part #: H14269
JIMS Oil Pump with Bottom Feed/Return Oil Lines: Manufacturer part # 1755 - Polished 6061 billet aluminum. Increased pump flow and return volume due to CNC-machined feed and return gears. Pumps include cover, gears, drive shaft, seals, gaskets, woodruff keys, snap-rings and mounting bolts. H14-269 uses 1/8 in. NPT fittings. No provisions for primary or drive chain oiling. Made in the U.S.A.. , NOTE: Check the thread size in the motor cases before mounting oil pump., , NOTE: 73-80 models may require drilling -- use drilling jig PART NO. H14-252.. 1755
2 on hand

More Info/Options for JIMS Oil Pump with Bottom Feed/Return Oil Lines 1755

$360.99 Scorpion Stainless Steel Slip-On Silencer DSYA 52 $360.99
Manufacturer: Scorpion
Dennis Kirk Part #: 432499
Scorpion Stainless Steel Slip-On Silencer: Manufacturer part # DSYA 52 - Stainless steel slip-on silencer. Model specific design to bring out the best in your machine. Boost power throughout the rpm range and improve throttle response. No repacking or rejetting. Include removable, U.S.F.S. approved spark arrestor. INCLUDED ITEMS: One slip on silencer. One 51-55mm band clamp. One 43-47mm band clamp. Two m8 washers. Two 10mm aluminum spacers. One m8 x 20mm cap head bolt. One m8 x 35mm cap head bolt. One H type silencer strap. One protective rubber for silencer strap. One connecting pipe. One instruction sheet.. DSYA 52
1 on hand

More Info/Options for Scorpion Stainless Steel Slip-On Silencer DSYA 52

$360.99 Alloy Art 4 1/2 in. Martini Light p213994 213995 $360.99
Manufacturer: Alloy Art
Dennis Kirk Part #: 213995
Alloy Art 4 1/2 in. Martini Light: Manufacturer part # p213994 - DennisKirk Part # 213995 - Feature original, unequaled style and design. CNC-machined aluminum bucket and bezel. 3-D CNC-machined mount. Includes a high-quality 12V sealed beam lamp. Available in 4.5" and 5.75" diameter in chrome, black-anodized or raw finish. Made in the U.S.A... p213994
1 on hand

More Info/Options for Alloy Art 4 1/2 in. Martini Light p213994 213995

$360.99 Saddlemen SaddleHyde King Seat w/o Driver Backrest 08020316 $360.99
Manufacturer: Saddlemen
Dennis Kirk Part #: 454261
Saddlemen SaddleHyde King Seat w/o Driver Backrest: Manufacturer part # 08020316 - Luxurious driver and passenger comfort with unsurpassed back support for driver and thick, comfortable pad for passenger. SaddleGel pad in driver's portion provides even weight distribution. Removable/adjustable optional driver's backrest; vertical adjustments are made via a spring detent in the backrest bar and horizontal adjustments (fore-aft) are made with a thumbscrew. Choose seat with either soft touch SaddleHyde or leather cover (as noted) Made in the U.S.A.. , , Dimensions: , Overall Seat Length: 30 in., Drivers Seat: Length: 19 in., Width: 13-1/2 in., Backrest Height: 9 in., Passenger Seat: Length: 11 in., Width: 7 in.. 08020316
1 on hand

More Info/Options for Saddlemen SaddleHyde King Seat w/o Driver Backrest 08020316

$360.99