|
|
|
|
|
|
$366.99
Mustang Vintage Sport Touring Seat 453899
Dennis Kirk Part #: 453899
Mustang Vintage Sport Touring Seat 453899: Manufacturer part # 75029 - The deeply-pocketed vinyl driver seat sits at an ideal cruising angle. Passenger bucket seat features Mustangs unique internal steel support wings. Drivers back is well supported by the nose of the passenger pad that extends forward to create a full 8 in. backrest. All styles feature braided edge trim.. 75029
Expected Soon
More Info/Options for Mustang Vintage Sport Touring Seat 453899
|
|
|
|
$366.95
Magura Mainstreet Hydraulic Clutch Kit 572997
Dennis Kirk Part #: 572997
Magura Mainstreet Hydraulic Clutch Kit 572997: Manufacturer part # 0120612 - Offer very smooth feel and consistent operation. 40% easier to operate than cable systems. Designed to complement early and late OEM brake reservoirs. Engineered and manufactured by Magura in Germany. Super easy to install; step-by-step instructions included. Kits are sealed with fluid and pre-bled. 56" (nonadjustable) length version fits most applications. Chrome finish. Require using OEM or aftermarket clamp half. For refill, requires Magura mineral oil fluid.. 0120612
4 on Hand
More Info/Options for Magura Mainstreet Hydraulic Clutch Kit 572997
|
|
|
|
$366.95
Magura Mainstreet Hydraulic Clutch Kit 572998
Dennis Kirk Part #: 572998
Magura Mainstreet Hydraulic Clutch Kit 572998: Manufacturer part # 0120611 - Offer very smooth feel and consistent operation. 40% easier to operate than cable systems. Designed to complement early and late OEM brake reservoirs. Engineered and manufactured by Magura in Germany. Super easy to install; step-by-step instructions included. Kits are sealed with fluid and pre-bled. 56" (nonadjustable) length version fits most applications. Chrome finish. Require using OEM or aftermarket clamp half. For refill, requires Magura mineral oil fluid.. 0120611
1 on Hand
More Info/Options for Magura Mainstreet Hydraulic Clutch Kit 572998
|
|
|
|
$366.95
Moose Full Chassis Skid Plate 492364
Dennis Kirk Part #: 492364
Moose Full Chassis Skid Plate 492364: Manufacturer part # 657 - Made of tough 3/16" aluminum alloy plate. Full-body skid plates protect frame, engine cases and undercarriage. High-impact areas made from 1/4? extruded aluminum. Feature a clear anodized finish and an integrated, long-wearing chain guide. Custom fit for each model. , , NOTE: This is a three piece set. 657
1 on Hand
More Info/Options for Moose Full Chassis Skid Plate 492364
|
|
|
|
$365.99
JIMS Flow Pro 1 Billet Oil Pump 149011
Dennis Kirk Part #: 149011
JIMS Flow Pro 1 Billet Oil Pump 149011: Manufacturer part # 1754B - Black with top feed/return oil lines. 6061 billet aluminum. Increased pump flow and return volume due to CNC-machined feed and return gears. Pump includes cover, gears, drive shaft, seals, gaskets, woodruff keys, snap-rings and mounting bolts. No provisions for primary or drive chain oiling. Made in the U.S.A.. , , NOTE: Check the thread size in the motor cases before mounting oil pump. NOTE: 73-80 models may require drilling -- use drilling jig PART NO. H14-252. The pictured oil pump is a bottom feed, this item is a top feed.. 1754B
Expected Soon
More Info/Options for JIMS Flow Pro 1 Billet Oil Pump 149011
|
|
|
|
$365.99
H1699 Mikuni HSR42 Smoothbore Carburetor Easy Kit
Dennis Kirk Part #: H1699
H1699 Mikuni HSR42 Smoothbore Carburetor Easy Kit: Manufacturer part # 4218 - For use with Screamin Eagle air filter, kit includes filter adapter. Easy kits accept the original H-D intake manifold, chock cable, air cleaner and throttle cables. Retains stock look. Increases throttle response, power, and mileage. Includes installation instructions and hardware. NOTE: Requires the use of appropriate year Big Twin throttle cables. , NOTE: Includes air filter adapter. 4218
2 on Hand
More Info/Options for H1699 Mikuni HSR42 Smoothbore Carburetor Easy Kit
|
|
|
|
|
|
|
|
$365.99
JIMS Flow Pro 1 Billet Oil Pump 149009
Dennis Kirk Part #: 149009
JIMS Flow Pro 1 Billet Oil Pump 149009: Manufacturer part # 1752B - Black with top feed/return oil lines. 6061 billet aluminum. Increased pump flow and return volume due to CNC-machined feed and return gears. Pump includes cover, gears, drive shaft, seals, gaskets, woodruff keys, snap-rings and mounting bolts. No provisions for primary or drive chain oiling. Made in the U.S.A.. , , NOTE: Check the thread size in the motor cases before mounting oil pump. NOTE: 73-80 models may require drilling -- use drilling jig PART NO. H14-252. The pictured oil pump is a bottom feed, this item is a top feed.. 1752B
1 on Hand
More Info/Options for JIMS Flow Pro 1 Billet Oil Pump 149009
|
|
|
|
$365.99
Paul Yaffe Originals Chopper Custom Handlebar for 46 Degree Front Ends - Chrome 594301
Dennis Kirk Part #: 594301
Paul Yaffe Originals Chopper Custom Handlebar for 46 Degree Front Ends - Chrome 594301: Manufacturer part # 46CHB - Paul Yaffe Originals believe their products are the finest and most unique products available on the market. They use only the highest quality materials and manufacturing practices. Their designs are engineered on world class bikes built by Paul Yaffe and his talented crew. They know their products work because they are tested on their bikes before they are even considered for production The latest wild designs from the mind of Paul Yaffe. Designed to fit triple trees that have 3.5" center distance mounting holes. Chopper handlebars for 46 front ends are designed to fit front ends with at least a 46° rake and 3.5" centers in the triple trees. Standard Chopper handlebars fit most stock 73-06 models that use risers with 3.5" centers (except Springer Softails).. 46CHB
1 on Hand
More Info/Options for Paul Yaffe Originals Chopper Custom Handlebar for 46 Degree Front Ends - Chrome 594301
|
|
|
|
$365.99
V-Factor Stretched Chopper Gas Tank 183034
Dennis Kirk Part #: 183034
V-Factor Stretched Chopper Gas Tank 183034: Manufacturer part # 81085 - Raw steel, indented sides. Designed for custom frames with stretched backbones (tunnel measures 22" L x 2 1/2" W). Weld-to-frame brackets recess into the bottom of the tank for a hidden look. 4.1-gal. capacity. Rubber isolated mounting brackets to prevent vibration cracks. Tapped 3/8"-24 at the rear of the tank for crossover line (line not included). Use with 13/16" (22mm) fuel valve. Requires 82-06 (screw-type) vented gas cap, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 81085
2 on Hand
More Info/Options for V-Factor Stretched Chopper Gas Tank 183034
|
|
|
|
$365.99
JIMS Flow Pro 1 Billet Oil Pump 149012
Dennis Kirk Part #: 149012
JIMS Flow Pro 1 Billet Oil Pump 149012: Manufacturer part # 1755B - Black with bottom feed/return oil lines. 6061 billet aluminum. Increased pump flow and return volume due to CNC-machined feed and return gears. Pump includes cover, gears, drive shaft, seals, gaskets, woodruff keys, snap-rings and mounting bolts. No provisions for primary or drive chain oiling. Made in the U.S.A.. NOTE: Check the thread size in the motor cases before mounting oil pump. NOTE: 73-80 models may require drilling -- use drilling jig PART NO. H14-252.. 1755B
1 on Hand
More Info/Options for JIMS Flow Pro 1 Billet Oil Pump 149012
|
|
|
|
$365.99
JIMS Flow Pro 1 Billet Oil Pump 149010
Dennis Kirk Part #: 149010
JIMS Flow Pro 1 Billet Oil Pump 149010: Manufacturer part # 1753B - Black with bottom feed/return oil lines. 6061 billet aluminum. Increased pump flow and return volume due to CNC-machined feed and return gears. Pump includes cover, gears, drive shaft, seals, gaskets, woodruff keys, snap-rings and mounting bolts. No provisions for primary or drive chain oiling. Made in the U.S.A.. NOTE: Check the thread size in the motor cases before mounting oil pump. NOTE: 73-80 models may require drilling -- use drilling jig PART NO. H14-252.. 1753B
1 on Hand
More Info/Options for JIMS Flow Pro 1 Billet Oil Pump 149010
|
|
|
|
$365.99
Jardine Rumblers Turndown Slip-On Mufflers 446035
Dennis Kirk Part #: 446035
Jardine Rumblers Turndown Slip-On Mufflers 446035: Manufacturer part # 14-1312-01 - Classic American big-bike styling and distinctive rumble. Highly polished and triple chrome-plated. Carburetor re-jetting or fuel injection re-mapping is recommended for most systems and all drag pipes. Slip-ons utilize stock headpipes. Left and right exits. Baffles are non-removable. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. 14-1312-01
1 on Hand
More Info/Options for Jardine Rumblers Turndown Slip-On Mufflers 446035
|
|
|
|
|
|
$364.99
CMP Utility Fold-A-Sled 515841
Dennis Kirk Part #: 515841
CMP Utility Fold-A-Sled 515841: Manufacturer part # 8152 - Haul big loads and passengers easily. Assembles in seconds; folds flat for storage. Folded dimensions: 58 in. L x 25 in. W x 10 in. H. Great for hunters. Heavy-duty construction features welded steel frame and hitch with baked-on black enamel finish, 12-gauge steel skis for durability and 1/4 in. masonite bed and seat back, 23 1/2 in. seat and an expanded metal mesh rear footboard. Weighs 82 lb.. Hitch not included. 72 in. L overall x 24 in. W steel frame.. 8152
2 on Hand
More Info/Options for CMP Utility Fold-A-Sled 515841
|
|
|
|
$364.95
Python 3 1/2 in. Round Slip-On Mufflers 4402417
Dennis Kirk Part #: 4402417
Python 3 1/2 in. Round Slip-On Mufflers 4402417: Manufacturer part # 41505 - Maximum protection from heat discoloration. High-velocity shielded muffler cores. Big-time performance gains. Python logo on each muffler. Removable baffles. Concave-shape slash-cut or slash-cut ends. , , Included Items:. , 1. (1) Python dresser right hand muff. , 2. (1) Python dresser left hand muff. , 3. (2) 5/16-18 x 1 1/4" hex hd zinc plated grade 5 bolt. , 4. (2) HD muffler clamp chromed. , 5. (2) 5/16-18 all metal loc nut. , 6. (4) 5/16 SAE flat washer.. 41505
2 on Hand
More Info/Options for Python 3 1/2 in. Round Slip-On Mufflers 4402417
|
|
|
|
|
|
$363.99
SK1276 Wiseco Piston Kit
Dennis Kirk Part #: SK1276
SK1276 Wiseco Piston Kit: Manufacturer part # SK1276 - OVERBORE to 992cc. Wisecos pistons are the perfect fit between technology and performance. Extensive R and D test programs and advanced manufacturing techniques add up to performance and proven dependability. With a squeeze of the throttle you will experience the acceleration and torque that puts you in the lead while others can only follow. Cylinder sleeving or replating required. Cylinder head machining required. Sold complete with matched and balanced pistons, rings, wrist pins, circlips and top end gasket kit.. SK1276
Expected Soon
More Info/Options for SK1276 Wiseco Piston Kit
|
|
|
|
$363.99
Smoke Wind-Vest 14 1/2 in. Windshield
Dennis Kirk Part #: H23132
Smoke Wind-Vest 14 1/2 in. Windshield: Manufacturer part # 101045CT - More than a decade after the original WindVest made it's debut, the company's goal remains the same, to continue offering the best high performance motorcycle windscreens. For use with stock OEM gauges. These shields feature fast, easy installation or removal in just minutes. Constructed of scratch-resistant 5mm Acrycast Acrylic with a light smoke tint. Chrome-plated aircraft billet aluminum mounting hardware with stainless steel fasteners. 14 1/2in H x 14 1/2in W. Made in the U.S.A... 101045CT
Expected Soon
More Info/Options for Smoke Wind-Vest 14 1/2 in. Windshield
|
|
|
|
$363.99
Jardine Tapered Semi-Complete System 447454
Dennis Kirk Part #: 447454
Jardine Tapered Semi-Complete System 447454: Manufacturer part # 14-2807-01S - Classic American big-bike styling and distinctive rumble. Highly polished and triple chrome-plated. The original muffler box is eliminated. Carburetor re-jetting or fuel injection re-mapping is recommended for most systems and all drag pipes. Baffles are non-removable, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing. Note: Includes Rear Headpipe, Reuse Stock Front Headpipe, , No Heat Shields Included. 14-2807-01S
1 on Hand
More Info/Options for Jardine Tapered Semi-Complete System 447454
|
|
|
|
$363.99
Clear Wind-Vest 14 1/2 in. Windshield
Dennis Kirk Part #: H23110
Clear Wind-Vest 14 1/2 in. Windshield: Manufacturer part # 101045C - More than a decade after the original WindVest made it's debut, the company's goal remains the same, to continue offering the best high performance motorcycle windscreens. For use with stock OEM gauges. These shields feature fast, easy installation or removal in just minutes. Constructed of scratch-resistant 5mm Acrycast Acrylic with a light smoke tint. Chrome-plated aircraft billet aluminum mounting hardware with stainless steel fasteners. 14 1/2in H x 14 1/2in W. Made in the U.S.A... 101045C
| |
