|
|
$394.99
Jardine RT-One Oval, High Mount Slip-On Muffler with Polished Aluminum Muffler 4400128
Dennis Kirk Part #: 4400128
Jardine RT-One Oval, High Mount Slip-On Muffler with Polished Aluminum Muffler 4400128: Manufacturer part # 18-1218-122-02 - RT-One systems are the pinnacle of Jardines exhaust lineup. Engineered to improve sound, looks and performance. Complete systems feature stainless steel headers. Dyno-tested to ensure maximum power with smooth delivery. Designed with experience gained as exhaust supplier to American Hondas road race team. High Mount. Come complete with CNC-machined billet clamp and stainless steel collector pipe (if required). Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 18-1218-122-02
1 on Hand
More Info/Options for Jardine RT-One Oval, High Mount Slip-On Muffler with Polished Aluminum Muffler 4400128
|
|
|
|
$394.99
White Carbon Fiber Maier Front Fenders
Dennis Kirk Part #: 618635
White Carbon Fiber Maier Front Fenders: Manufacturer part # 19030 - Maier bodywork is made of tough, vacuum-formed, high-density polyethylene. Designed for a perfect fit and uses stock hardware or provided hardware. Drilling is required. Colors are OEM color matched. INCLUDED ITEMS: One fender. Six 1/4"X3/4" round head screw. Six 1/4" nylock nuts. Six 1/4" washers.. 19030
1 on Hand
More Info/Options for White Carbon Fiber Maier Front Fenders
|
|
|
|
$394.99
GMA Engineering Custom 4-Piston Rear Caliper 198136
Dennis Kirk Part #: 198136
GMA Engineering Custom 4-Piston Rear Caliper 198136: Manufacturer part # GMAR10Q - Billet aluminum with "fin" design and a satin finish. Hanger brackets and brake pads included. Made in the U.S.A.. For rigid frames with 10" rotor (3/4" axle), , NOTE: Not recommended for use with imported stainless steel rotors, , NOTE: Requires use of 5/8 in. bore master cylinder, , For replacement rear brake pads use: , H19848 - DP pads (set of 2), H192500 - GMA pads (set of 4). GMAR10Q
1 on Hand
More Info/Options for GMA Engineering Custom 4-Piston Rear Caliper 198136
|
|
|
|
|
|
$394.95
Cobra Power Pro HP 2-Into-1 Exhaust System 4400264
Dennis Kirk Part #: 4400264
Cobra Power Pro HP 2-Into-1 Exhaust System 4400264: Manufacturer part # 2471 - Original PowerPro with chrome cylindrical muffler body. 3.5 in. muffler body with a beautifully machined chromed billet tip. Non-blueing muffler body with internal cooling. Chrome full-length collector head shield coverage. Double-insulated body. Baffle is removable, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 2471
Expected Soon
More Info/Options for Cobra Power Pro HP 2-Into-1 Exhaust System 4400264
|
|
|
|
$394.95
Cobra Power Pro HP 2-Into-1 Exhaust System 4400276
Dennis Kirk Part #: 4400276
Cobra Power Pro HP 2-Into-1 Exhaust System 4400276: Manufacturer part # 4470 - Original PowerPro with chrome cylindrical muffler body. 3.5 in. muffler body with a beautifully machined chromed billet tip. Non-blueing muffler body with internal cooling. Chrome full-length collector head shield coverage. Double-insulated body. Baffle is removable, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 4470
1 on Hand
More Info/Options for Cobra Power Pro HP 2-Into-1 Exhaust System 4400276
|
|
|
|
$394.95
Cobra Power Pro HP 2-Into-1 Exhaust System 4400273
Dennis Kirk Part #: 4400273
Cobra Power Pro HP 2-Into-1 Exhaust System 4400273: Manufacturer part # 3470 - Original PowerPro with chrome cylindrical muffler body. 3.5 in. muffler body with a beautifully machined chromed billet tip. Non-blueing muffler body with internal cooling. Chrome full-length collector head shield coverage. Double-insulated body. Baffle is removable, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 3470
Expected Soon
More Info/Options for Cobra Power Pro HP 2-Into-1 Exhaust System 4400273
|
|
|
|
$394.95
Cobra Power Pro HP 2-Into-1 Exhaust System 4400386
Dennis Kirk Part #: 4400386
Cobra Power Pro HP 2-Into-1 Exhaust System 4400386: Manufacturer part # 4468 - Original PowerPro with chrome cylindrical muffler body. 3.5 in. muffler body with a beautifully machined chromed billet tip. Non-blueing muffler body with internal cooling. Chrome full-length collector head shield coverage. Double-insulated body. Baffle is removable, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 4468
1 on Hand
More Info/Options for Cobra Power Pro HP 2-Into-1 Exhaust System 4400386
|
|
|
|
$394.95
Cobra Power Pro HP 2-Into-1 Exhaust System 4400277
Dennis Kirk Part #: 4400277
Cobra Power Pro HP 2-Into-1 Exhaust System 4400277: Manufacturer part # 4472 - Original PowerPro with chrome cylindrical muffler body. 3.5 in. muffler body with a beautifully machined chromed billet tip. Non-blueing muffler body with internal cooling. Chrome full-length collector head shield coverage. Double-insulated body. Baffle is removable, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 4472
Expected Soon
More Info/Options for Cobra Power Pro HP 2-Into-1 Exhaust System 4400277
|
|
|
|
$394.95
H4453 Vance & Hines Staggered Dual Straightshots System
Dennis Kirk Part #: H4453
H4453 Vance & Hines Staggered Dual Straightshots System: Manufacturer part # 16807 - These bold and beautiful pipes provide the powerful look of straight pipes with features that set them apart from other straight pipes. 1 3/4 in. headpipes with 2 1/4 in. bodies. Full-length, full 220 degree coverage heat shields are plasma-arc cut from a full piece of tubing that matches the bodies exactly and give you a non-blueing, fat pipe look. Will not accept Hot Tips. Removable baffles provide powerful sound, but reduce the bark common to normal straight pipes. Straightshot systems include all necessary mounting hardware and instructions for a hassle-free, perfect fit every time. Replacement baffle use: H25-229. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration., , Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 16807
Expected Soon
More Info/Options for H4453 Vance & Hines Staggered Dual Straightshots System
|
|
|
|
$394.95
Cobra Power Pro HP 2-Into-1 Exhaust System 4400263
Dennis Kirk Part #: 4400263
Cobra Power Pro HP 2-Into-1 Exhaust System 4400263: Manufacturer part # 2467 - Original PowerPro with chrome cylindrical muffler body. 3.5 in. muffler body with a beautifully machined chromed billet tip. Non-blueing muffler body with internal cooling. Chrome full-length collector head shield coverage. Double-insulated body. Baffle is removable, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 2467
2 on Hand
More Info/Options for Cobra Power Pro HP 2-Into-1 Exhaust System 4400263
|
|
|
|
$394.95
Cobra Power Pro HP 2-Into-1 Exhaust System 4400272
Dennis Kirk Part #: 4400272
Cobra Power Pro HP 2-Into-1 Exhaust System 4400272: Manufacturer part # 3466 - Original PowerPro with chrome cylindrical muffler body. 3.5 in. muffler body with a beautifully machined chromed billet tip. Non-blueing muffler body with internal cooling. Chrome full-length collector head shield coverage. Double-insulated body. Baffle is removable, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 3466
1 on Hand
More Info/Options for Cobra Power Pro HP 2-Into-1 Exhaust System 4400272
|
|
|
|
$394.95
Drag Specialties Low Profile Touring Seat with faux Snake Inlay 45870
Dennis Kirk Part #: 45870
Drag Specialties Low Profile Touring Seat with faux Snake Inlay 45870: Manufacturer part # 0801-0185 - Feature solar reflective leather top panels so seat stays cool even in direct sunlight. Molded polyurethane foam interior that retains shape. Thermoformed ABS-plastic seat base for perfect fit. Fully carpeted bottom with rubber bumper to protect paint. Low-profile design. Instructions and all necessary hardware included. Fit with all Drag and most HD sissy bars. Made in the U.S.A.. Measures: , 18 in. L X 13 in. W, front, 12 in. L X 10 1/2 in. W, rear. Overall Length: 30 1/2 in.. 0801-0185
2 on Hand
More Info/Options for Drag Specialties Low Profile Touring Seat with faux Snake Inlay 45870
|
|
|
|
$394.95
Cobra Power Pro HP 2-Into-1 Exhaust System 4400278
Dennis Kirk Part #: 4400278
Cobra Power Pro HP 2-Into-1 Exhaust System 4400278: Manufacturer part # 4473 - Original PowerPro with chrome cylindrical muffler body. 3.5 in. muffler body with a beautifully machined chromed billet tip. Non-blueing muffler body with internal cooling. Chrome full-length collector head shield coverage. Double-insulated body. Baffle is removable, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 4473
Expected Soon
More Info/Options for Cobra Power Pro HP 2-Into-1 Exhaust System 4400278
|
|
|
|
$394.95
Cobra Power Pro HP 2-Into-1 Exhaust System 4401618
Dennis Kirk Part #: 4401618
Cobra Power Pro HP 2-Into-1 Exhaust System 4401618: Manufacturer part # 2475 - Original PowerPro with chrome cylindrical muffler body. 3.5 in. muffler body with a beautifully machined chromed billet tip. Non-blueing muffler body with internal cooling. Chrome full-length collector head shield coverage. Double-insulated body. Baffle is removable, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 2475
1 on Hand
More Info/Options for Cobra Power Pro HP 2-Into-1 Exhaust System 4401618
|
|
|
|
CLEARANCE!
Was: $525.99
Now: $394.49
Jardine Classic 4-1 System with Chrome Headpipe and Megaphone Muffler 25213
Dennis Kirk Part #: 25213
Jardine Classic 4-1 System with Chrome Headpipe and Megaphone Muffler 25213: Manufacturer part # 14-2402-01 - In 1958, Jardine developed its first exhaust system for Hot Rod Cars. In 1972, they applied that performance technology to their first high performance exhaust system for motorcycles Powerful systems provide a wider power band and excellent top-end horsepower. High quality duplex nickel and chrome finish. Precise mandrel bends for perfect fit. Chrome 4-into-1 features megaphone muffler. Carburetor re-jetting may be desired for best performance., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 14-2402-01
1 on Hand
More Info/Options for Jardine Classic 4-1 System with Chrome Headpipe and Megaphone Muffler 25213
|
|
|
|
CLEARANCE!
Was: $525.99
Now: $394.49
Jardine Classic 4-1 System with Chrome Headpipe and Megaphone Muffler 25168
Dennis Kirk Part #: 25168
Jardine Classic 4-1 System with Chrome Headpipe and Megaphone Muffler 25168: Manufacturer part # 14-1405-01 - In 1958, Jardine developed its first exhaust system for Hot Rod Cars. In 1972, they applied that performance technology to their first high performance exhaust system for motorcycles Powerful systems provide a wider power band and excellent top-end horsepower. High quality duplex nickel and chrome finish. Precise mandrel bends for perfect fit. Chrome 4-into-1 features megaphone muffler. Carburetor re-jetting may be desired for best performance., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 14-1405-01
1 on Hand
More Info/Options for Jardine Classic 4-1 System with Chrome Headpipe and Megaphone Muffler 25168
|
|
|
|
$393.99
Leo Vince SBK Stainless Oval Slip-On With Titanium Muffler 4400921
Dennis Kirk Part #: 4400921
Leo Vince SBK Stainless Oval Slip-On With Titanium Muffler 4400921: Manufacturer part # 7504 - Specifically designed to boost torque and horsepower across the rpm range while producing a rich exhaust note. Slip-ons feature stainless steel mid-pipe. TIG-welded stainless steel AISI 304 muffler body and fittings. Satin-finish titanium muffler sleeve. Include aluminum alloy mounting strap and frame attachment brackets. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 7504
1 on Hand
More Info/Options for Leo Vince SBK Stainless Oval Slip-On With Titanium Muffler 4400921
|
|
|
|
$393.99
Pro Circuit Type 496 Spark Arrestor Silencer 448898
Dennis Kirk Part #: 448898
Pro Circuit Type 496 Spark Arrestor Silencer 448898: Manufacturer part # 4Y03250496 - Designed to reduce exhaust noise level to legal dB while producing a noticeable gain in horsepower over OEM systems. State-of-the-art system uses a longer aluminum body and special internal E-glass packing for maximum sound disbursement for less noise and more power. Lightweight brushed aluminum muffler body. FIM-approved stainless steel modular end cap and intake tube. Hand-assembled and -welded for a fit and finish that would rival any Factory Works part. Includes lightweight aluminum mounting brackets. Wire mesh removable U.S. Forest Service-approved spark arrestor.. 4Y03250496
1 on Hand
More Info/Options for Pro Circuit Type 496 Spark Arrestor Silencer 448898
|
|
|
|
$393.99
Leo Vince SBK Stainless Oval Slip-On With Carbon Fiber Muffler 4400984
Dennis Kirk Part #: 4400984
Leo Vince SBK Stainless Oval Slip-On With Carbon Fiber Muffler 4400984: Manufacturer part # 7249 - Specifically designed to boost torque and horsepower across the rpm range while producing a rich exhaust note. Slip-ons feature stainless steel mid-pipe. TIG-welded stainless steel AISI 304 muffler body and fittings. Glossy carbon fiber muffler sleeve. Include aluminum alloy mounting strap and frame attachment brackets. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 7249
1 on Hand
More Info/Options for Leo Vince SBK Stainless Oval Slip-On With Carbon Fiber Muffler 4400984
|
|
|
|
$393.99
Leo Vince SBK Stainless Oval Slip-On With Carbon Fiber Muffler 4401082
Dennis Kirk Part #: 4401082
Leo Vince SBK Stainless Oval Slip-On With Carbon Fiber Muffler 4401082: Manufacturer part # 7570 - Specifically designed to boost torque and horsepower across the rpm range while producing a rich exhaust note. Slip-ons feature stainless steel mid-pipe. TIG-welded stainless steel AISI 304 muffler body and fittings. Glossy carbon fiber muffler sleeve. Include aluminum alloy mounting strap and frame attachment brackets. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 7570
| |
