|
Magnum Sterling Chromite II Spark Plug Wires 3032T
|
|
 |
Magnum Sterling Chromite II Spark Plug Wires 3032T
|
This site contains about 138,282 documents.
|
|
View by:
Title
|
Brand
|
Category
|
Type
|
Price
|
Part Number
|
|
Page:
1
1,700
1,800
1,900
2,000
2,100
2,200
2,300
2,400
2,500
2,680
2,690
2,700
2,710
2,720
2,730
2,740
2,750
2,760
2,765
2,766
2,767
2,768
2,769
2,770
2,771
2,772
2,773
2,774
2,775
2,776
2,777
2,778
2,779
2,780
2,781
2,782
2,783
2,784
2,785
2,786
2,787
2,788
2,789
2,790
2,791
2,792
2,793
2,794
2,800
2,810
2,820
2,830
2,840
2,850
2,860
2,870
2,900
3,000
3,100
3,200
3,300
3,400
3,500
3,600
3,700
4,000
4,610
|
|
|
|
|
|
|
|
|
|
|
$47.99
Sunstar Sprocket 2548248 $47.99
Manufacturer: Sunstar
Dennis Kirk Part #: 80546348
Sunstar Sprocket: Manufacturer part # 2548248 - Maximum strength sprockets at minimum weight; front sprockets made with C45 steel and SCM415 chromoly steel alloy -- rear sprockets made with C45 high carbon steel. Each sprocket is heat-treated and finished by hand. Each sprocket is sandblasted to reduce surface tension and anodized to a beautiful satin-silk finish. Meniscus-shaped self-cleaning grooves featured on both sides of teeth. Meet or exceed the highest-quality compound mod. standards set by the motorcycle industry. , NOTE: Anytime you use other than the standard front/rear sprocket sizes, clearance must be checked. When converting to a smaller chain size, especially for racing, be sure to use the highest-grade O-ring chain available (heavy-duty non-O-ring acceptable for drag racing),. 2548248
1 on hand
More Info/Options for Sunstar Sprocket 2548248
|
|
|
|
|
|
|
|
$47.99
Kenda K761 Dual Sport Tire K761 542220 $47.99
Manufacturer: Kenda
Dennis Kirk Part #: 542220
Kenda K761 Dual Sport Tire: Manufacturer part # K761 - DennisKirk Part # 542220 - Rated for speeds up to 130mph. Unbeatable combination of both street and off-road grip and stability. Remarkably durable nylon four-ply construction delivers total riding confidence. Advanced compound design for extra braking and cornering traction. DOT approved. , , DIMENSIONS , Inflated Width/Measuring Rim Width: 3.5 in./2.75 in., Inflated Diameter: 25.5 in., Acceptable Rim Width(s): 2.75 in., Deepest Tread Depth: 16/32 in., Balance Dot: None, Directional Arrow: Yes, Speed Rating: H-rated up to 130 mph, , Capacities and Construction: , Load Capacity/Inflation Pressure: 336 LBS/32 PSI, Load Range: B, Tread Plies/Material: 4 Nylon, Sidewall Plies/Material: 4 Nylon, DOT Approved for Road Use: Yes, Tube or Tubeless: Tube-Type, , NOTE: A new tube and rim strip is recommended with every new tire. K761
Expected Soon
More Info/Options for Kenda K761 Dual Sport Tire K761 542220
|
|
|
|
$47.99
Kenda K771 Millville Sticky Front Tire K771 642999 $47.99
Manufacturer: Kenda
Dennis Kirk Part #: 642999
Kenda K771 Millville Sticky Front Tire: Manufacturer part # K771 - DennisKirk Part # 642999 - The sticky has the same basic features as the standard Millville. New soft rubber compound formula helps you stick on hard packed dirt and cement start pads -- suitable for applying ice studs for winter riding. Low temperature/quick warm-up feature. This product is not affiliated with or endorsed by Spring Creek MX Park in Millville, MN. Sidewall ID Information: Kenda K771F Millville Sticky 80/100-21 M/C 51M. , Dimensions:, Inflated Width/Measuring Rim Width: 3.50 in./ 1.60 in., Inflated Diameter: 27.90 In., Acceptable Rim Width(s): 1.60-1.85 in., Deepest Tread Depth: 19/32 in., Balance DOT: No, Directional Arrow: No, Speed Rating: M-Rated up to 81 mph, , Capacities and Construction:, Load Capacity/Inflation Pressure: Not Specified, Load Range: Not Specified, Bias or Radial Ply: Bias, Tread Plies/Material: Not Specified, Sidewall Plies/Material: Not Specified, DOT Approved for Road Use: Yes, Tube or Tubeless: Either-depending on rim, , NOTE: A new tube and rim strip is recommended with every new tire. K771
9 on hand
More Info/Options for Kenda K771 Millville Sticky Front Tire K771 642999
|
|
|
|
$47.99
Pirelli Scorpion ATV p653186 $47.99
Manufacturer: Pirelli
Dennis Kirk Part #: 653180
Pirelli Scorpion ATV: Manufacturer part # p653186 - Deep tread carries over the tire's shoulder for exceptional grip and traction. Unique tread pattern provides unequaled deep-mud traction in forward and reverse as well as high-speed stability on trails in both the straights and turns. Durable, puncture-resistant construction. , , Dimensions, Deepest Tread Depth: 20/32 in., Balance Dot: No, Directional Arrow: Yes, , Capacities and Construction, Bias or Radial Ply: Bias, Maximum Inflation Pressure to Seat Bead: 35 psi, Maximum Operating Pressure: 7 psi, DOT Approved for Road Use: No, Tube or Tubeless: Tubeless, Wheel Recommendation: Bead Lock Wheel. p653186
8 on hand
More Info/Options for Pirelli Scorpion ATV p653186
|
|
|
|
|
|
|
|
$47.99
Magnum Sterling Chromite II Spark Plug Wires 3032T $47.99
Manufacturer: Magnum
Dennis Kirk Part #: H20792
Magnum Sterling Chromite II Spark Plug Wires: Manufacturer part # 3032T - High-voltage, high-temperature, 8mm silicone ignition wires featuring high-performance, wire-wound Monel (white copper-nickel alloy) suppression cores, Posi-Lock spring clip terminals and the highest quality silicone spark plug boots. 150 ohms resistance. New design eliminates need for wires to be grounded. Each strand of the outer braid is coated with a plastic enamel, then covered with a clear Teflon skin. Perfect match for Sterling Chromite II fuel/oil and brake lines and Sterling Chromite II clutch, throttle and idle cables. Made in the U.S.A... 3032T
1 on hand
More Info/Options for Magnum Sterling Chromite II Spark Plug Wires 3032T
|
|
|
|
|
|
$47.99
Magnum Sterling Chromite II Spark Plug Wires 3033K $47.99
Manufacturer: Magnum
Dennis Kirk Part #: H20797
Magnum Sterling Chromite II Spark Plug Wires: Manufacturer part # 3033K - High-voltage, high-temperature, 8mm silicone ignition wires featuring high-performance, wire-wound Monel (white copper-nickel alloy) suppression cores, Posi-Lock spring clip terminals and the highest quality silicone spark plug boots. 150 ohms resistance. New design eliminates need for wires to be grounded. Each strand of the outer braid is coated with a plastic enamel, then covered with a clear Teflon skin. Perfect match for Sterling Chromite II fuel/oil and brake lines and Sterling Chromite II clutch, throttle and idle cables. Made in the U.S.A... 3033K
2 on hand
More Info/Options for Magnum Sterling Chromite II Spark Plug Wires 3033K
|
|
|
|
$47.99
Manley Race Master Chrome Plated Exhaust Valve 990612 $47.99
Manufacturer: Manley
Dennis Kirk Part #: H181013
Manley Race Master Chrome Plated Exhaust Valve: Manufacturer part # 990612 - Even in the most severe environments, these valves are designed to out-flow and out-perform the competition. For added strength, one-piece forgings are manufactured from high-temperature materials. Performance-oriented shapes and durable chrome-plated stems featured with a durable swirl-polish. Even at high rpm, a stable valve train is ensured due to the up to 30% weight reduction over stock. Durable hard-chrome plating stems. Sold in pairs. Replaces OEM # 18082-83. Head diameter 1.615 in., stem diameter .3095 in.. Race Master values are recommended for performance street applications and for those with alcohol engines.. 990612
2 on hand
More Info/Options for Manley Race Master Chrome Plated Exhaust Valve 990612
|
|
|
|
|
|
$47.99
Magnum Sterling Chromite II Spark Plug Wires 3040K $47.99
Manufacturer: Magnum
Dennis Kirk Part #: H20818
Magnum Sterling Chromite II Spark Plug Wires: Manufacturer part # 3040K - High-voltage, high-temperature, 8mm silicone ignition wires featuring high-performance, wire-wound Monel (white copper-nickel alloy) suppression cores, Posi-Lock spring clip terminals and the highest quality silicone spark plug boots. 150 ohms resistance. New design eliminates need for wires to be grounded. Each strand of the outer braid is coated with a plastic enamel, then covered with a clear Teflon skin. Perfect match for Sterling Chromite II fuel/oil and brake lines and Sterling Chromite II clutch, throttle and idle cables. Made in the U.S.A... 3040K
1 on hand
More Info/Options for Magnum Sterling Chromite II Spark Plug Wires 3040K
|
|
|
|
$47.99
Magnum Sterling Chromite II Spark Plug Wires 3041B $47.99
Manufacturer: Magnum
Dennis Kirk Part #: H20810
Magnum Sterling Chromite II Spark Plug Wires: Manufacturer part # 3041B - High-voltage, high-temperature, 8mm silicone ignition wires featuring high-performance, wire-wound Monel (white copper-nickel alloy) suppression cores, Posi-Lock spring clip terminals and the highest quality silicone spark plug boots. 150 ohms resistance. New design eliminates need for wires to be grounded. Each strand of the outer braid is coated with a plastic enamel, then covered with a clear Teflon skin. Perfect match for Sterling Chromite II fuel/oil and brake lines and Sterling Chromite II clutch, throttle and idle cables. Made in the U.S.A... 3041B
| | |