TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

K & N Factory-Style Washable, K & N Factory-Style Filter Element HA-1210

$47.99 Competition Werkes GP Passenger Footpegs p499387 491668 $47.99 Manufacturer: Competition Werkes Dennis Kirk Part #: 491668 Competition Werkes GP Passenger Footpegs: Manufacturer part # p499387 - DennisKirk Part # 491668 - 6061 T-6 billet aluminum footpegs are lighter and stronger than stock. Slash-cut bottoms allow greater lean angles. Cut-in tread grooves grip boots better than traditional knurled grooves. Fold up for safety.. p499387 1 on hand More Info/Options for Competition Werkes GP Passenger Footpegs p499387 491668

$47.99 Competition Werkes GP Footpegs p499401 $47.99 Manufacturer: Competition Werkes Dennis Kirk Part #: 499401 Competition Werkes GP Footpegs : Manufacturer part # p499401 - 6016 T-6 billet aluminum footpegs are lighter and stronger than stock. Slash-cut bottoms allow greater lean angles. Cut-in tread grooves grip boots better than traditional knurled grooves. Fold up for safety. Sold as Pairs. NOTE: This following models will not fit as Passenger Pegs: Suzuki RF600R 1994-96. Suzuki GSF600S Bandit 600S 1995-04. Suzuki RF900R 1994-97. GSX-R1100/W 1989-98. GSF1200/S/SA Bandit 1997-05. Peg Length: 4 3/8 in. Length without Mount: 3 in. Peg Diameter: 13/16 in.. p499401 1 on hand More Info/Options for Competition Werkes GP Footpegs p499401

$47.99 Michelin Bopper Scooter Front or Rear Tires BOPPER 543417 $47.99 Manufacturer: Michelin Dennis Kirk Part #: 543417 Michelin Bopper Scooter Front or Rear Tires: Manufacturer part # BOPPER - DennisKirk Part # 543417 - L-rated for speeds up to 75 mph. Tubeless scooter tires compatible with tube-type. For exceptional adhesion in corners, the semi-stick tread pattern is derived from racing slicks. Get outstanding grip when fully leaned due to the low profile. Directional tread provides optimal performance on front or rear wheels. Sidewall ID Information: MICHELIN 120/90-10 M/C 57L BOPPER. , Dimensions, Inflated Width/Measuring Rim Width: 5.05 in./2.75 in., Inflated Diameter: 20.12 in., Acceptable Rim Width(s): 2.50-3.00 in., Deepest Tread Depth: 6/32 in., Balance Dot: No, Directional Arrow: Yes, Speed Rating: L-Rated up to 75 mph, , Capacities and Construction, Load Capacity/Inflation Pressure: 481 lbs/33 psi, Load Range: A, Bias or Radial Ply: Bias, Tread Plies/Material: 2 Polyester, Sidewall Plies/Material: 2 Polyester, DOT Approved for Road Use: Yes, Tube or Tubeless: Yes-Either, depending on rim. BOPPER 1 on hand More Info/Options for Michelin Bopper Scooter Front or Rear Tires BOPPER 543417

$47.99 EVS Sports PP05 Ultimate Shorts PP05 3404197XL $47.99 Manufacturer: EVS Sports Dennis Kirk Part #: 3404197XL EVS Sports PP05 Ultimate Shorts: Manufacturer part # PP05 - DennisKirk Part # 3404197XL - Takes the PP02 impact short a step further. Features a lightly padded saddle and impact panels over the hips, tailbone and in front of the thighs. Fits 36"-38" waist, , Sizing - waist size , Small = 28"-32", Medium = 32"-34", Large = 34"-36", X-Large = 36"-38", XX-Large = 38"-40".. PP05 4 on hand More Info/Options for EVS Sports PP05 Ultimate Shorts PP05 3404197XL

$47.99 Clymer Honda Repair Manual M5072 $47.99 Manufacturer: Clymer Dennis Kirk Part #: 361817 Clymer Honda Repair Manual: Manufacturer part # M5072 - Whether it is simple maintenance or complete restoration, do not start work without Clymer, the leader in service manuals. Save yourself time and frustration with these procedures and techniques used by the professionals. Comprehensive manual contains exploded views, drawings, specifications and charts to illustrate each job. Features shortcut repairs and high-performance modifications.. M5072 2 on hand More Info/Options for Clymer Honda Repair Manual M5072

$47.99 Factory Effex All-Grip Seat Cover 08-24510 $47.99 Manufacturer: Factory Effex Dennis Kirk Part #: 453298 Factory Effex All-Grip Seat Cover: Manufacturer part # 08-24510 - Rubberized gripper material covers the entire seat for superior handling and control. Advanced material is rugged enough to take all you can throw at it, plus it's triple-stitched for extra long life. Specially designed locator pockets on nose and rear make installation a snap. Smooth clean line means it looks good on your bike, too!.. 08-24510 1 on hand More Info/Options for Factory Effex All-Grip Seat Cover 08-24510

$47.99 Pro-One Iron Cross Saddlebag Latch Inserts 104780 $47.99 Manufacturer: Pro-One Dennis Kirk Part #: 506729 Pro-One Iron Cross Saddlebag Latch Inserts: Manufacturer part # 104780 - Add unique, custom look to your bike. Billet aluminum construction. Fits latch covers (part numbers 506731 or 506732). Includes all mounting hardware. Direct bolt-on; accept OEM locks. Sold in pairs.. 104780 1 on hand More Info/Options for Pro-One Iron Cross Saddlebag Latch Inserts 104780

$47.99 Samson 18 in. Straight Heat Shield for 1 3/4 in. Pipes H-113 $47.99 Manufacturer: Samson Dennis Kirk Part #: H25884 Samson 18 in. Straight Heat Shield for 1 3/4 in. Pipes: Manufacturer part # H-113 - Chrome universal heat shield. Mounting clamps included. Made in the U.S.A.. Sold each.. H-113 4 on hand More Info/Options for Samson 18 in. Straight Heat Shield for 1 3/4 in. Pipes H-113

$47.99 Ricks Universal Type 3-Phase Rectifier 10500 $47.99 Manufacturer: Ricks Dennis Kirk Part #: 21578 Ricks Universal Type 3-Phase Rectifier: Manufacturer part # 10500 - Fits many older 4-cylinder bikes. 10500 2 on hand More Info/Options for Ricks Universal Type 3-Phase Rectifier 10500

$47.99 Kenda K270 Tire K270 642897 $47.99 Manufacturer: Kenda Dennis Kirk Part #: 642897 Kenda K270 Tire: Manufacturer part # K270 - DennisKirk Part # 642897 - DOT Approved Tire. Designed for todays high-performance, dual-purpose motorcycles. Deep, aggressive knob pattern has rounded profile for more biting edges. Special rubber compound offers great off-road grip without compromising wear on the street. Sidewall ID Information: Kenda 120/80-18 62P. , Dimensions: , Inflated Width/Measuring Rim Width: Not Available, Inflated Diameter: Not Available, Acceptable Rim Width(s): Not Available, Deepest Tread Depth: Not Available, Balance Dot: None, Directional Arrow: None, Speed Rating: P-Rated to 93 MPH, , Capacities and Construction: , Load Capacity/Inflation Pressure: 584 LBS/32 PSI, Bias or Radial Ply: Bias, Tread Plies/Material: 4 Ply Rating/Nylon, Sidewall Plies/Material: 2 Ply Nylon, DOT Approved for Road Use: Yes, Tube or Tubeless: Tube-Type, , NOTE: 50 percent on road/50 percent offroad, , NOTE: A new tube and rim strip is recommended with every new tire. K270 5 on hand More Info/Options for Kenda K270 Tire K270 642897

$47.99 Back Off Red LED Light Bar with Black Base-3.25 in. 02044 $47.99 Manufacturer: Back Off Dennis Kirk Part #: H21248 Back Off Red LED Light Bar with Black Base-3.25 in.: Manufacturer part # 02044 - Designed for all-weather operation, these light bars feature dual-density LEDs, so they can be used as running/brake, running/turn signal or turn signal/brake. Choose from red or amber lenses with chrome or powder-coated black die-cast mounting base frame -- mounting bracket included. Lights are available in 6 in. or 3 1/4 in. lengths and measure 5/8 in. W x 7/8 in. H. Made in the U.S.A.. Sold as Pairs.. 02044 2 on hand More Info/Options for Back Off Red LED Light Bar with Black Base-3.25 in. 02044

$47.99 Ricks Regulator/Rectifier 10555 $47.99 Manufacturer: Ricks Dennis Kirk Part #: 201818 Ricks Regulator/Rectifier: Manufacturer part # 10555 - OEM-style. Made in Argentina. 10555 1 on hand More Info/Options for Ricks Regulator/Rectifier 10555

$47.99 PIAA H4 Headlight Bulb - GT-X Super Plasma 70476 $47.99 Manufacturer: PIAA Dennis Kirk Part #: 22491 PIAA H4 Headlight Bulb - GT-X Super Plasma: Manufacturer part # 70476 - With a blend of unique gas mixtures, filament materials and proprietary coatings, PIAA XTRA technology bulbs offer far greater output than standard halogen bulbs with the same wattage. Standard halogen bulbs give off a yellowish light, PIAAs give off a whiter, brighter light, enhancing visibility in all-around conditions. Each PIAA bulb is tested to meet extremely high manufacturing tolerances and performance standards, GT-X Super Plasma , For the look of HID there is nothing closer than the GT-X Super Plasma bulbs. With the H4 shining at 3800-5000K (Kelvin Color Temperature) and the H3 at 5000K you will never sacrifice performance. With the XTRA technology, these bulbs have power to spare. , , Specifications: , Design Volts: 12, Design Amps: 5/4.58, Design Watts: 60/55 (Watts= Volts x Amps), Candlepower: 3500/5000, Light Output: 135/125W, Overall Length: 3in... 70476 More than 10 on hand More Info/Options for PIAA H4 Headlight Bulb - GT-X Super Plasma 70476

$47.99 Throttle Threads Crest Glitter Shop Shirt p3568375 3568375M $47.99 Manufacturer: Throttle Threads Dennis Kirk Part #: 3568375M Throttle Threads Crest Glitter Shop Shirt: Manufacturer part # p3568375 - DennisKirk Part # 3568375M - Exlusive shop wear for women and girls. Dress with the Best. Made from a 65% polyester and 35% cotton mix. Patches are embroidered on front and back. Instructions for personalized name patches are included.. p3568375 1 on hand More Info/Options for Throttle Threads Crest Glitter Shop Shirt p3568375 3568375M

$47.99 Sunstar Sprocket 2550148 $47.99 Manufacturer: Sunstar Dennis Kirk Part #: 8002248S Sunstar Sprocket: Manufacturer part # 2550148 - High quality, all steel sprockets meet the demands of todays highest horsepower machines. They also receive a parkerizing surface treatment for rust and corrosion resistance. Sunstar steel rear sprockets are manufactured from the highest quality 1045 high-carbon steel, and most are heat treated for added strength and wear resistance. Computer designed weight reduction holes are included where possible. Most rear sprockets are zinc plated, and some have a baked-on durable paint for corrosion resistance. Anytime you use other than a standard sprocket clearance must be checked . , NOTE: At this time we are not able to specify on our website the standard tooth sizes of the sprockets or size and length of chain for your motorcycle. We will display every sprocket that fits. If you need the standard tooth size information or chain size and length, call us toll-free 800-969-7504.. 2550148 1 on hand More Info/Options for Sunstar Sprocket 2550148

$47.99 K & N Factory-Style Filter Element HA-1210 $47.99 Manufacturer: K & N Dennis Kirk Part #: 30308 K & N Factory-Style Filter Element: Manufacturer part # HA-1210 - NON-RESTRICTIVE - dust and dirt will not clog the filter because they remain on the outside of the element. FREE-FLOWING - despite the outer layer of trapped dust and dirt, air flow between the particles remains virtually unaffected. MOISTURE-RESISTANT - moisture will not clog the oil-saturated element, even completely wet, the filter will allow the engine to breathe freely. MINIMAL-SERVICE - because dirt particles that build up on the outside of the element actually aid in the filtering action, frequent cleaning is not required. Unaffected by pollution control devices - oil breather blow-by is absorbed in the fabric without effect. All K & N air filters must be treated with filter oil before installation.. HA-1210 1 on hand More Info/Options for K & N Factory-Style Filter Element HA-1210

$47.99 Motion Pro Fork Spring Compressor Kit- 41mm forks 080301 $47.99 Manufacturer: Motion Pro Dennis Kirk Part #: 282300 Motion Pro Fork Spring Compressor Kit- 41mm forks: Manufacturer part # 080301 - Ease the job of installing fork caps on most Harley-Davidson 39mm and 41mm forks with a large amount of spring pre-load. For 39mm forks use 282299. For both 39mm and 41mm tools use 282301. 080301 1 on hand More Info/Options for Motion Pro Fork Spring Compressor Kit- 41mm forks 080301

$47.99 UFO Yamaha Radiator Shrouds YA03846046 $47.99 Manufacturer: UFO Dennis Kirk Part #: 615149 UFO Yamaha Radiator Shrouds: Manufacturer part # YA03846046 - Plastic is color-matched to stock or in optional works colors. Pre-drilled pieces mount easily to stock locations. Made in Italy.. YA03846046 3 on hand More Info/Options for UFO Yamaha Radiator Shrouds YA03846046

$47.99 K & N Factory-Style Filter Element HA-8080 $47.99 Manufacturer: K & N Dennis Kirk Part #: 30330 K & N Factory-Style Filter Element: Manufacturer part # HA-8080 - NON-RESTRICTIVE - dust and dirt will not clog the filter because they remain on the outside of the element. FREE-FLOWING - despite the outer layer of trapped dust and dirt, air flow between the particles remains virtually unaffected. MOISTURE-RESISTANT - moisture will not clog the oil-saturated element, even completely wet, the filter will allow the engine to breathe freely. MINIMAL-SERVICE - because dirt particles that build up on the outside of the element actually aid in the filtering action, frequent cleaning is not required. Unaffected by pollution control devices - oil breather blow-by is absorbed in the fabric without effect. All K & N air filters must be treated with filter oil before installation.. HA-8080