TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Arlen Ness Smooth Slingshot Die-Cast Mirror 13-043

$48.99 Magnum Sterling Chromite II Braided Idle Cable p1902619 $48.99 Manufacturer: Magnum Dennis Kirk Part #: 1902619 Magnum Sterling Chromite II Braided Idle Cable: Manufacturer part # p1902619 - State-of-the-art throttle and idle cables by Magnum. Patented Sterling Chromite II metal braiding has a tough enamel coating for no-scratch application and lasting, chrome-like brilliance. Advanced multi-strand design for superior flexibility. Polyethylene inner lining ensures smooth, trouble-free operation. PVC and high-temperature polyester moisture barrier under the braiding keeps out the elements and prolongs life. Chrome fittings; made in the U.S.A... p1902619 1 on hand More Info/Options for Magnum Sterling Chromite II Braided Idle Cable p1902619

$48.99 Thunder Cycle Smooth Dead End Oil Plug - 1 1/4 in. ID p495434 $48.99 Manufacturer: Thunder Cycle Dennis Kirk Part #: 495434 Thunder Cycle Smooth Dead End Oil Plug - 1 1/4 in. ID: Manufacturer part # p495434 - Machined from billet aluminum with a chrome finish. Available in smooth or notched style.. p495434 Expected Soon More Info/Options for Thunder Cycle Smooth Dead End Oil Plug - 1 1/4 in. ID p495434

$48.99 Arlen Ness Rad II Teardrop Ness Micro Die-Cast Mirror-Right 13-022 $48.99 Manufacturer: Arlen Ness Dennis Kirk Part #: 392786 Arlen Ness Rad II Teardrop Ness Micro Die-Cast Mirror-Right: Manufacturer part # 13-022 - Small stylish designs for custom applications. Chrome-plated die-cast construction. Hardware for Harley and cruiser models included. Sold each. Order part no. 392785 for matching left mirror. Specs: Mirror width (glass only): 115mm/4 1/2 in. Mirror height (glass only): 38mm/1 1/2 in. Stem height: 76mm/3 in. Stem offset: 3 1/2 in. Thread size: 7mm (right hand threads), 5/16 X 18 and 10mm right handed thread adapters included. 13-022 4 on hand More Info/Options for Arlen Ness Rad II Teardrop Ness Micro Die-Cast Mirror-Right 13-022

$48.99 Arlen Ness Smooth Slingshot Die-Cast Mirror 13-043 $48.99 Manufacturer: Arlen Ness Dennis Kirk Part #: 391806 Arlen Ness Smooth Slingshot Die-Cast Mirror: Manufacturer part # 13-043 - Die-cast and chrome plated at an affordable price. Mirror designs and slots cut in mirror frame give a unique look. Sold as Each. NOTE: All include 10mm RH threaded adapters for mounting to most Japanese bikes, as well as 5/16 in. -18 bolts for mounting to Harley-Davidson. Most Japanese motorcycle with thread-in mirrors use 10mm RH threads. Many Yamahas use 10mm LH threads for the right-hand mirror. For those, a set of black finished adapters may be purchased separately (the left hand adapter is included to match mirror heights) order Part Number 27-159 Specs: Length (overall): 5 7/8 in. Length (glass only): 4 3/4 in. Height: 2 in. Stem length: 7 in. Stem offset: 3 1/4 in.. 13-043 4 on hand More Info/Options for Arlen Ness Smooth Slingshot Die-Cast Mirror 13-043

$48.99 Arlen Ness Ness 3-D Cat Eye Mirrors- 13-069 $48.99 Manufacturer: Arlen Ness Dennis Kirk Part #: 392317 Arlen Ness Ness 3-D Cat Eye Mirrors-: Manufacturer part # 13-069 - A new look to a sleek mirror. Feature chrome-plated die-cast construction. Sold each. For matching left mirror use part number 39-2316. Specs: Mirror width (glass only): 143mm/5 5/8 in. Mirror height (glass only): 44mm/1 11/16 in. Stem height: 135mm/5 3/8 in. Stem offset: 55mm/2 1/4 in. Thread size: 5/16 in. and 10mm (right hand thread). 13-069 1 on hand More Info/Options for Arlen Ness Ness 3-D Cat Eye Mirrors- 13-069

$48.99 Pro Grip Clear-View Film System 3268 $48.99 Manufacturer: Pro Grip Dennis Kirk Part #: 372828 Pro Grip Clear-View Film System: Manufacturer part # 3268 - For easy viewing and to help keep mud and moisture out, apply the the transparent outer film canister and Mud Flap with PROGRIP MX logo to your pre-bored Light Sensitive Lens. Be ready to race in seconds by simply applying the adhesive Mud Flap to the top edge of the roll of film. Easily advance the film with a quick pull of the canister knob. Know when to replace the roll of film by clearly seeing through the transparent canister. Good for the following PROGRIP goggles: Model 3200 series, Model 3300 series and Model 3400. Includes Two canisters, one Mud Flap and two rolls of film. , , Replacement film rolls (12 pack) - Part No. 372829, Replacement Mud Flaps (pair) - Part No. 372830. 3268 2 on hand More Info/Options for Pro Grip Clear-View Film System 3268

$48.99 Magnum 3/8 in./10mm 90 Degree Custom Sterling Chromite II Black Pearl Designer Series Upper Front Brake Line p1903773 1903776 $48.99 Manufacturer: Magnum Dennis Kirk Part #: 1903776 Magnum 3/8 in./10mm 90 Degree Custom Sterling Chromite II Black Pearl Designer Series Upper Front Brake Line: Manufacturer part # p1903773 - DennisKirk Part # 1903776 - Revolutionary new concept in aftermarket H-D steel-braided brake lines. One-piece lower line assemblies -- lines are brazed into polished-chrome banjo fittings at the caliper end and a polished chrome junction block at the other, so you just bolt the fittings to the calipers and the junction block to the bottom of the triple tree. One-piece upper lines feature brazed-on fittings that screw into the junction block at one end and the master cylinder at the other. Lines feature Magnums Sterling Chromite II finish; fittings are polished chrome. Now its easier to make brake line changes when installing new handlebars since you only have to replace the upper line. Upper lines are available in 10MM 90 degree upper banjo fittings, ensuring a clean, custom look in any application. Meet DOT MVSS-106 specifications. Made in the U.S.A.. NOTE: Upper and lower lines must be purchased separately. p1903773 1 on hand More Info/Options for Magnum 3/8 in./10mm 90 Degree Custom Sterling Chromite II Black Pearl Designer Series Upper Front Brake Line p1903773 1903776

$48.99 Maier Rear Fender 18550 $48.99 Manufacturer: Maier Dennis Kirk Part #: 59954 Maier Rear Fender: Manufacturer part # 18550 - Exact fit for each model listed. Use stock mounting hardware. High-density polyethylene construction. Drilling is required.. 18550 3 on hand More Info/Options for Maier Rear Fender 18550

$48.99 Winderosa Engine Complete Gasket Set/2 Cylinder 711194 $48.99 Manufacturer: Winderosa Dennis Kirk Part #: 263189 Winderosa Engine Complete Gasket Set/2 Cylinder: Manufacturer part # 711194 - Complete gasket sets contain all necessary engine gaskets for a complete rebuild: includes all head, base, intake, exhaust gaskets or O-rings, plus crankshaft end seals and power valve gaskets. Single-cylinder sets contain crankcase gasket where required. Order one set for each engine.. 711194 4 on hand More Info/Options for Winderosa Engine Complete Gasket Set/2 Cylinder 711194

$48.99 Progressive Suspension Tire Repair Kit w/Moto Pump TRK2 $48.99 Manufacturer: Progressive Suspension Dennis Kirk Part #: 282833 Progressive Suspension Tire Repair Kit w/Moto Pump: Manufacturer part # TRK2 - Repairs both tube and tubeless tires. PART NO. 28-2833 features a new style Moto Pump with non-threaded C0 cartridges. Modern design tubeless plugs are more effective than old-time string types. Includes plug installation tool, tube patches, glue, scraper and two CO-2 cartridges. , Note: CO-2 cartridges cannot be transported on an airplane. TRK2 4 on hand More Info/Options for Progressive Suspension Tire Repair Kit w/Moto Pump TRK2

$48.99 Mount Kit for CMP Universal Pro-Series Quad Guard Bumper 1931 $48.99 Manufacturer: CMP Dennis Kirk Part #: 514527 Mount Kit for CMP Universal Pro-Series Quad Guard Bumper: Manufacturer part # 1931 - Mounting kit includes all hardware needed to mount either the standard bumper part no. 51-4518 or the flared bumper part no. 51-4519 to your model.. 1931 2 on hand More Info/Options for Mount Kit for CMP Universal Pro-Series Quad Guard Bumper 1931

$48.99 Motion Pro Armor Coat Braided Stainless Steel Push Throttle Cable 640238 $48.99 Manufacturer: Motion Pro Dennis Kirk Part #: 1901001 Motion Pro Armor Coat Braided Stainless Steel Push Throttle Cable: Manufacturer part # 640238 - These braided stainless cables have a protective clear armor coat extruded onto the braided stainless steel. Cut down on damage to painted or chromed surfaces while maintaining the original look. , DIMENSIONS: Free Length: 53-1/2 in.. 640238 2 on hand More Info/Options for Motion Pro Armor Coat Braided Stainless Steel Push Throttle Cable 640238

$48.99 Woodys Extender Trail III Carbides EPI3-1225 $48.99 Manufacturer: Woodys Dennis Kirk Part #: 032051 Woodys Extender Trail III Carbides: Manufacturer part # EPI3-1225 - 4 in. of 60 degree turning carbide; 1 1/2 in. carbide wear pads for extended life. Full-length hardweld between carbide inserts. 7/16 in. host bar, 5/16 in.studs are extra-long for easy ski skin mounting. , NOTE: Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs with a wire brush.. EPI3-1225 More than 10 on hand More Info/Options for Woodys Extender Trail III Carbides EPI3-1225

$48.99 Pro X Piston Assembly - 47mm Bore 4070 $48.99 Manufacturer: Pro X Dennis Kirk Part #: 131250S Pro X Piston Assembly - 47mm Bore: Manufacturer part # 4070 - The smart alternative to costly engine repairs. Cast from a high-silicone content aluminum alloy that meets or exceeds OEM specifications, then CNC-machined to extremely close tolerances. OEM replacements. Available in standard and oversizes. Pro X rings are exact OEM replacements and can be interchange with stock part. B, C, D and E extend the life of expensive plated cylinders. Pistons supplied in a kit includes rings, wrist pins, and circlips.. 4070 1 on hand More Info/Options for Pro X Piston Assembly - 47mm Bore 4070

$48.99 Pro X Piston Assembly - 48.5mm Bore 4076 $48.99 Manufacturer: Pro X Dennis Kirk Part #: 1312506 Pro X Piston Assembly - 48.5mm Bore: Manufacturer part # 4076 - The smart alternative to costly engine repairs. Cast from a high-silicone content aluminum alloy that meets or exceeds OEM specifications, then CNC-machined to extremely close tolerances. OEM replacements. Available in standard and oversizes. Pro X rings are exact OEM replacements and can be interchange with stock part. B, C, D and E extend the life of expensive plated cylinders. Pistons supplied in a kit includes rings, wrist pins, and circlips.. 4076 2 on hand More Info/Options for Pro X Piston Assembly - 48.5mm Bore 4076

$48.99 Nelson-Rigg SR-6000 Stormrider Rain Suit prod1630230 3568392XXL $48.99 Manufacturer: Nelson-Rigg Dennis Kirk Part #: 3568392XXL Nelson-Rigg SR-6000 Stormrider Rain Suit: Manufacturer part # prod1630230 - DennisKirk Part # 3568392XXL - Two-piece 100% waterproof rain suit that includes a soft corduroy inner collar with hood and cooling vents under each arm. Two large outer pockets with gusset expanders, a full-length zipper with hook-and-loop storm flaps and a soft polyester outer shell with PVC backing is featured on the jacket. An elasticized waist and adjustable cuffs with hook-and-loop tabs are included in the pants. Reflective striping for increased nighttime visibility is included on both jacket and pants.. prod1630230 4 on hand More Info/Options for Nelson-Rigg SR-6000 Stormrider Rain Suit prod1630230 3568392XXL

$48.99 Magnum Sterling Chromite II Spark Plug Wires pH20160 209047 $48.99 Manufacturer: Magnum Dennis Kirk Part #: 209047 Magnum Sterling Chromite II Spark Plug Wires: Manufacturer part # pH20160 - DennisKirk Part # 209047 - High-voltage, high-temperature, 8mm silicone ignition wires featuring high-performance, wire-wound Monel (white copper-nickel alloy) suppression cores, Posi-Lock spring clip terminals and the highest quality silicone spark plug boots. 150 ohms resistance. New design eliminates need for wires to be grounded. Each strand of the outer braid is coated with a plastic enamel, then covered with a clear Teflon skin. Perfect match for Sterling Chromite II fuel/oil and brake lines and Sterling Chromite II clutch, throttle and idle cables. Made in the U.S.A... pH20160 1 on hand More Info/Options for Magnum Sterling Chromite II Spark Plug Wires pH20160 209047

$48.99 Novello Non-Vented Smoothie Gas Cap p184134 $48.99 Manufacturer: Novello Dennis Kirk Part #: 184138 Novello Non-Vented Smoothie Gas Cap: Manufacturer part # p184134 - Solid 6061 billet aluminum. Show caliber chrome plating or black wrinkle finish. Sold each. , , NOTE: For 82-E96 models. p184134 Expected Soon More Info/Options for Novello Non-Vented Smoothie Gas Cap p184134

$48.99 Boyesen Super Stock Carbon Reeds SSC002 $48.99 Manufacturer: Boyesen Dennis Kirk Part #: 181733 Boyesen Super Stock Carbon Reeds: Manufacturer part # SSC002 - Single-stage carbon replacement reeds. Improves performance - matched to exacting OEM specifications. Costs less and lasts longer than other stock or carbon reeds on the market.. SSC002