TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Boyesen Pro Series Reeds PRO112, Boyesen Pro Series Reeds PRO73

$48.99 Magnum Black Pearl Braided Idle Cable p1901911 1901916 $48.99 Manufacturer: Magnum Dennis Kirk Part #: 1901916 Magnum Black Pearl Braided Idle Cable: Manufacturer part # p1901911 - DennisKirk Part # 1901916 - State-of-the-art idle cable by Magnum. Black Pearl braid features black-chrome fittings. Advanced multi-strand design for superior flexibility. Polyethylene inner lining ensures smooth, trouble-free operation. PVC and high-temperature polyester moisture barrier under the braiding keeps out the elements and prolongs life. Made in the U.S.A., , NOTE: , Length given is length of outer housing only, excluding elbows (Check your length) , , All pre-96 cables have threaded elbows; 96 and later cables have non-threaded elbows, , Specs: , Housing Length: 41 3/4". , Overall Length: 52 1/2", Travel: 4 3/4", OEM Number: 56387-96, , Part No.'s for an Alternative Length Black Pearl Idle Cables for custom height/width handlebars Fits Dressers 1996-2007 (without cruise control) , Dyna and Softail 1996-2008 , # 1901918 (26 1/2 in.), # 1901917 (30 3/4 in.), # 1901912 (31 3/4 in.), # 1901951 (34 3/4 in.), # 1901952 (36 3/4 in.), # 1901946 (37 3/4 in.), # 1901914 (39 1/2 in.), # 1901915 (42 1/2 in.), # 1901948 (43 1/2 in.), # 1901949 (45 1/2 in.), # 1901950 (47 1/2 in.), # 1901994 (49 1/2 in.), # 1901913 (32 1/2 in.), # 1901911 (38 in.).. p1901911 1 on hand More Info/Options for Magnum Black Pearl Braided Idle Cable p1901911 1901916

$48.99 Lazer Star Retro Straight Red LED Single Function Bulb-1156 Style LED1156R $48.99 Manufacturer: Lazer Star Dennis Kirk Part #: 22489 Lazer Star Retro Straight Red LED Single Function Bulb-1156 Style: Manufacturer part # LED1156R - Resist vibration much better than incandescent bulbs. Straight style has an exterior ring that allows use of the OEM reflector for exceptional illumination. Will work in most OEM lights (load equalizer required). Sold each. Made in the U.S.A.. , , Dimensions:, Outside Diameter: 1in., Length: 1-7/8in., , Straight style bulbs will not fit Deuce style signals with flat lenses.. LED1156R 1 on hand More Info/Options for Lazer Star Retro Straight Red LED Single Function Bulb-1156 Style LED1156R

$48.99 JIMS Countershaft 4th Gear for 5-Speed Transmissions 35625-79B $48.99 Manufacturer: JIMS Dennis Kirk Part #: H11261 JIMS Countershaft 4th Gear for 5-Speed Transmissions: Manufacturer part # 35625-79B - Sold individually. Replaces OEM number 35625-79B. , NOTE: Does not fit 95 FLT models. 35625-79B 3 on hand More Info/Options for JIMS Countershaft 4th Gear for 5-Speed Transmissions 35625-79B

$48.99 Arlen Ness Grooved Pocket Turbo Die-Cast Mirror 13-031 $48.99 Manufacturer: Arlen Ness Dennis Kirk Part #: 391808 Arlen Ness Grooved Pocket Turbo Die-Cast Mirror: Manufacturer part # 13-031 - Die-cast and chrome plated at an affordable price. Mirror designs and slots cut in mirror frame give a unique look. Sold each. , , NOTE: For matching left mirror use part number 39-1807, All include 10mm RH threaded adapters for mounting to most Japanese bikes, as well as 5/16 in. -18 bolts for mounting to Harley-Davidson, Most Japanese motorcycle with thread-in mirrors use 10mm RH threads. Many Yamahas use 10mm LH threads for the right-hand mirror. For those, a set of black finished adapters may be purchased separately (the left hand adapter is included to match mirror heights) order Part Number 27-159 Specs: Length (overall): 6 7/8 in. Length (glass only): 4 7/8 in. Height (glass only): 2 in. Stem length: 7 in. Stem offset: 3 1/4 in.. 13-031 1 on hand More Info/Options for Arlen Ness Grooved Pocket Turbo Die-Cast Mirror 13-031

$48.99 Arlen Ness Vision Grooved Die-Cast Mirror 13-050 $48.99 Manufacturer: Arlen Ness Dennis Kirk Part #: 391811 Arlen Ness Vision Grooved Die-Cast Mirror: Manufacturer part # 13-050 - Die-cast and chrome plated at an affordable price. Mirror designs and slots cut in mirror frame give a unique look. Sold each. NOTE: All include 10mm RH threaded adapters for mounting to most Japanese bikes, as well as 5/16 in. -18 bolts for mounting to Harley-Davidson. Most Japanese motorcycle with thread-in mirrors use 10mm RH threads. Many Yamahas use 10mm LH threads for the right-hand mirror. For those, a set of black finished adapters may be purchased separately (the left hand adapter is included to match mirror heights) order Part Number 27-159 Specs: Mirror length (overall): 5 3/8 in. Mirror length (glass only):4 3/8 in. Mirror height (overall): 2 3/4in. Mirror height (glass only): 2 3/16 in. Stem length: 7 in. Stem offset: 3 1/4 in.. 13-050 3 on hand More Info/Options for Arlen Ness Vision Grooved Die-Cast Mirror 13-050

$48.99 Sno-Stuff Clear Windshield 450-421 $48.99 Manufacturer: Sno-Stuff Dennis Kirk Part #: 24281 Sno-Stuff Clear Windshield: Manufacturer part # 450-421 - High-quality Sno Stuff windshields match the originals exactly for a perfect fit. Most are made of tough, .075 in. thick cold-weather butyrate material. Certain applications are .100 in. thick butyrate and some are Lexan polycarbonate for extra strength (These will be noted). Mounting screws, O-rings and grommets available separately. Note: Uses small O-rings for mounting Note: All windshields are protected with plastic shrinkwrap for shipping. Before removing, be certain you are going to keep it. Windshields with plastic wrap removed are not returnable. 450-421 7 on hand More Info/Options for Sno-Stuff Clear Windshield 450-421

$48.99 Magnum 7/16 in. 90 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line 37325 $48.99 Manufacturer: Magnum Dennis Kirk Part #: H190019 Magnum 7/16 in. 90 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line : Manufacturer part # 37325 - Revolutionary new concept in aftermarket H-D steel-braided brake lines. One-piece upper lines feature brazed-on fittings that screw into the junction block at one end and the master cylinder at the other. Lines feature Magnum's Sterling Chromite II finish; fittings are polished chrome. Now it's easier to make brake line changes when installing new handlebars since you only have to replace the upper line. Upper lines are available in 11 in. - 39 in. lengths with 90 degree, 35 degree or straight upper banjo fittings, ensuring a clean, custom look in any application. Meet DOT MVSS-106 specifications. Made in the U.S.A., , Included Items:. , 1. (1) Brake line 25 in. with one 7/16 in. 90 degree banjo and one 3/8 in.-24 female inverted flare. , 2. (2) 7/16 in. crush washers , , NOTE: Upper and lower lines must be purchased separately (see below for Part No.), , Lower Brake Line Assemlies FXST/I/C, FXSTB/I, FXSTD/I 1984-2008; FXDWG 1993-2005 with single disc - Part No. H19971 FLHR/C/I, FLHT, FLHTC/I, FLHTCU/I, FLTR/I 1994-2007 with dual disc - Part No. H19975 FLST/C/I, FLSTF/I, FLSTN 1987-2008 with single disc - Part No. H19972 FXD 1995-2008; FXDL 2001-2007; XL/H 883/C/Dlx/Hugger, XL/H 1200/C 1987-2003 with single disc - Part No. H19973 FXDX, FXDXT 1998-2005; FXDL 1993-1999; XL 1200S 1996-2003; XL 883R 2002-2003 with dual disc - Part No. H19974 XL 883/L/C, 1200C 2004-2008 with single disc - Part No. 199151. 37325 1 on hand More Info/Options for Magnum 7/16 in. 90 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line 37325

$48.99 Kenda K299 Bear Claw Tire K299 542159 $48.99 Manufacturer: Kenda Dennis Kirk Part #: 542159 Kenda K299 Bear Claw Tire: Manufacturer part # K299 - DennisKirk Part # 542159 - Angled bar-and-lug pattern for consistent all-terrain performance. Hard compound to resist punctures and tears. Tube or tubeless. K299 6 on hand More Info/Options for Kenda K299 Bear Claw Tire K299 542159

$48.99 Smith Fuel Sweat-X Goggles p373385 $48.99 Manufacturer: Smith Dennis Kirk Part #: 373385 Smith Fuel Sweat-X Goggles: Manufacturer part # p373385 - Same great features as the Fuel goggles. Medium fit. Sweat-X F.A.T. 3-layer face foam that improves the fit of the helmet. Custom painted frames. Sweat-X strap and Stay-Put strap retainer included. Standard with Clear lenses. , , Frame Color: Black and silver. , Foam Color: Gray and Black. , Strap Color: Black. , Logo: Black "S" in a white background. , Strap: 1 11/16" W with Anti-slip rubber. , Lens: Single, clear lexan with tearoff pins. , Vents: Top, bottom and sides with black foam filters.. p373385 1 on hand More Info/Options for Smith Fuel Sweat-X Goggles p373385

$48.99 Smith Racer Pack Evo Goggles p373415 373418 $48.99 Manufacturer: Smith Dennis Kirk Part #: 373418 Smith Racer Pack Evo Goggles: Manufacturer part # p373415 - DennisKirk Part # 373418 - Traditional-size frame backed with plush face foam. Silicone-lined strap. Comes with clear single lens. , , Frame Color: Red. , Foam Color: Gray and Black. , Strap Color: Red. , Logo: Black "S" in white background. , Strap: 1 11/16" W with anti-slip silicone. , Lens: Single, clear lexan with tearoff pins. , Vents: Top, bottom and sides with black foam filters.. p373415 1 on hand More Info/Options for Smith Racer Pack Evo Goggles p373415 373418

$48.99 Kenda K574F Tire K574F 652966 $48.99 Manufacturer: Kenda Dennis Kirk Part #: 652966 Kenda K574F Tire: Manufacturer part # K574F - DennisKirk Part # 652966 - New front/rear specific tread patterns designed for a variety of terrains. Reinforced knobs improve wear and durability. Dimpled knobs improve grip on hard dirt. Tube or tubeless. K574F 5 on hand More Info/Options for Kenda K574F Tire K574F 652966

$48.99 BKT AT110 Front Tire p653087 $48.99 Manufacturer: BKT Dennis Kirk Part #: 653087 BKT AT110 Front Tire: Manufacturer part # p653087 - Designed with reinforced extended knobs for increased control on mixed or hard-pack terrain. Hard wearing 4-ply nylon casing. Angled, elongated knobs give precise corner control and straight tracking. Puncture-resistant natural rubber compound extends tread life.. p653087 Expected Soon More Info/Options for BKT AT110 Front Tire p653087

$48.99 Emgo OEM Replacement Mirror p393176 $48.99 Manufacturer: Emgo Dennis Kirk Part #: 393176 Emgo OEM Replacement Mirror: Manufacturer part # p393176 - Economical EMGO mirrors are available in a wide variety of shapes, sizes and finishes. Order the one listed for your motorcycle for an exact match, or simply order any with the correct method of attachment. , , Specs: , Mirror Size (glass only): 5 in. W x 3 3/8 in. H, Stem Length: 3 in., Thread Size: 6mm-1.00 x 15mm, Mounting bolt center distance: 2 in.. p393176 1 on hand More Info/Options for Emgo OEM Replacement Mirror p393176

$48.99 Targa Tail Kit 22-257 $48.99 Manufacturer: Targa Dennis Kirk Part #: 212762 Targa Tail Kit: Manufacturer part # 22-257 - Kit features a black anodized aluminum license/turn signal mount, turn signals and an LED license light. , NOTE: Cateye lens. 22-257 2 on hand More Info/Options for Targa Tail Kit 22-257

$48.99 Barnett High-Efficiency Stainless Steel Clutch Cable 63KSC6HE $48.99 Manufacturer: Barnett Dennis Kirk Part #: 1900187 Barnett High-Efficiency Stainless Steel Clutch Cable: Manufacturer part # 63KSC6HE - Smooth-working, durable, made with the finest components available and virtually indestructible; these can only describe Barnett cables. Platinum Series cables feature a bright, silver-plated braided cover. Stainless steel cables with clear coating offer a custom look without the fear of damaging areas on your bike that cables come in contact with. 57 1/2 in. long (+6 in.). , NOTE: Length given is that of the outer housing only, excluding elbows and/or adjusters., Specs: Adjuster Location: Top. 63KSC6HE 1 on hand More Info/Options for Barnett High-Efficiency Stainless Steel Clutch Cable 63KSC6HE

$48.99 Motion Pro Armor Coat Braided Stainless Steel Pull Throttle Cable 640222 $48.99 Manufacturer: Motion Pro Dennis Kirk Part #: 196134 Motion Pro Armor Coat Braided Stainless Steel Pull Throttle Cable: Manufacturer part # 640222 - These braided stainless cables have a protective clear armor coat extruded onto the braided stainless steel. Cut down on damage to painted or chromed surfaces while maintaining the original look.. 640222 1 on hand More Info/Options for Motion Pro Armor Coat Braided Stainless Steel Pull Throttle Cable 640222

$48.99 Cometic Top End Gasket Set 64056 $48.99 Manufacturer: Cometic Dennis Kirk Part #: H26140 Cometic Top End Gasket Set: Manufacturer part # 64056 - Sets include all necessary gaskets, seals and O-rings needed when performing a complete engine rebuild or top end overhaul. Complete sets also include the necessary chain housing gaskets and seals required when reinstalling the engine. Rocker arm cover gasket sets contain molded cover gaskets. Replaces OEM # 17037-57. 64056 1 on hand More Info/Options for Cometic Top End Gasket Set 64056

CLOSEOUT! Was: $69.99 Now: $48.99 Joe Rocket Supermoto Gloves 556-1106 $48.99 Manufacturer: Joe Rocket Dennis Kirk Part #: 356086XXL Joe Rocket Supermoto Gloves: Manufacturer part # 556-1106 - Drum dyed leather. Injection molded, vented knuckle. High density padding on fingers, cuff, and wrist. Hook and loop wrist strap. Aeroprene cuff.. 556-1106 1 on hand More Info/Options for Joe Rocket Supermoto Gloves 556-1106