TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Magnum Sterling Chromite II Braided Idle Cable 83411-H

$49.99 Cometic Hi-Performance Complete Engine Gasket Set C2018S $49.99 Manufacturer: Cometic Dennis Kirk Part #: 261677 Cometic Hi-Performance Complete Engine Gasket Set: Manufacturer part # C2018S - Complete set including crankshaft end seals. All high-quality Cometic gasket kits come complete with head, base, intake/reed, exhaust and water manifold gaskets where applicable. Maximum seal and flexibility is obtained with excellent torque retention while resisting penetration from fuels, coolant and oils.. C2018S 9 on hand More Info/Options for Cometic Hi-Performance Complete Engine Gasket Set C2018S

$49.99 Pro Armor Fabric Roof p516055 $49.99 Manufacturer: Pro Armor Dennis Kirk Part #: 516055 Pro Armor Fabric Roof: Manufacturer part # p516055 - UV and water-repellent fabric. For those who want a lightweight sun-barrier-type roof. Designed to install in minutes and stows away under the driver's seat or in glove box.. p516055 1 on hand More Info/Options for Pro Armor Fabric Roof p516055

$49.99 UFO Honda Side Panel-Right XR03679041 $49.99 Manufacturer: UFO Dennis Kirk Part #: 614642 UFO Honda Side Panel-Right: Manufacturer part # XR03679041 - Plastic is color-matched to stock or in optional works colors. Pieces are already drilled and can be mounted easily to stock locations. Made in Italy.. XR03679041 2 on hand More Info/Options for UFO Honda Side Panel-Right XR03679041

$49.99 CKX VG-501 Helmet 107461 $49.99 Manufacturer: CKX Dennis Kirk Part #: 33032010S CKX VG-501 Helmet: Manufacturer part # 107461 - Rear vents for better air flow through helmet. High-tech, injection molded, painted polycarbonate shell with clear coat. Expanded polystyrene foam liner for perfect fit and comfort. Removable zip-off neck curtain. Includes 3-snap visor. DOT approved.. 107461 Expected Soon More Info/Options for CKX VG-501 Helmet 107461

$49.99 Magnum 3/8 in./10mm 180 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line 37627 $49.99 Manufacturer: Magnum Dennis Kirk Part #: H190028 Magnum 3/8 in./10mm 180 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line : Manufacturer part # 37627 - Revolutionary new concept in aftermarket H-D steel-braided brake lines. One-piece upper lines feature brazed-on fittings that screw into the junction block at one end and the master cylinder at the other. Lines feature Magnum's Sterling Chromite II finish; fittings are polished chrome. Now it's easier to make brake line changes when installing new handlebars since you only have to replace the upper line. Upper lines are available in 11 in. - 39 in. lengths with 90 degree, 35 degree or straight upper banjo fittings, ensuring a clean, custom look in any application. Meet DOT MVSS-106 specifications. Made in the U.S.A., , Included Items:, 1. (1) Brake line 27 in. with one 10mm straight banjo and one 3/8 in.-24 female inverted flare. , 2. (2) 10mm crush washers , , NOTE: Upper and lower lines must be purchased separately (see below for Part No.), , Lower Brake Line Assemlies FXST/I/C, FXSTB/I, FXSTD/I 1984-2008; FXDWG 1993-2005 with single disc - Part No. H19971 FLHR/C/I, FLHT, FLHTC/I, FLHTCU/I, FLTR/I 1994-2007 with dual disc - Part No. H19975 FLST/C/I, FLSTF/I, FLSTN 1987-2008 with single disc - Part No. H19972 FXD 1995-2008; FXDL 2001-2007; XL/H 883/C/Dlx/Hugger, XL/H 1200/C 1987-2003 with single disc - Part No. H19973 FXDX, FXDXT 1998-2005; FXDL 1993-1999; XL 1200S 1996-2003; XL 883R 2002-2003 with dual disc - Part No. H19974 XL 883/L/C, 1200C 2004-2008 with single disc - Part No. 199151. 37627 1 on hand More Info/Options for Magnum 3/8 in./10mm 180 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line 37627

$49.99 AFX FX-85 Helmet 0112-0006 $49.99 Manufacturer: AFX Dennis Kirk Part #: 3300630XXL AFX FX-85 Helmet: Manufacturer part # 0112-0006 - DOT certified. Made of thermoplastic poly alloy. Clear-coat finish protects helmet paint and graphics, while providing a great-looking shine. Modern off road style with three-screw visor. Ear cavities for communication speakers. Detachable chin bar. Weight of a medium 3lb... 0112-0006 1 on hand More Info/Options for AFX FX-85 Helmet 0112-0006

$49.99 Motovan Ski Skins 0089004 $49.99 Manufacturer: Motovan Dennis Kirk Part #: 10272 Motovan Ski Skins : Manufacturer part # 0089004 - Attaches to the bottoms of your skis for better flotation, ski protection and less drag on the snow. Made from high-density polyethylene resin with a smooth, glossy finish. Pre-drilled for the original wear rod and includes ski loop bolt for secure attachment, except for Yamaha Vmax 500 and 600 models, which do not attach to the ski loop and must be drilled and riveted. Sold in pairs in a variety of colors.. 0089004 7 on hand More Info/Options for Motovan Ski Skins 0089004

$49.99 Magnum 7/16", 35 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line 37927 $49.99 Manufacturer: Magnum Dennis Kirk Part #: 1900604 Magnum 7/16", 35 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line : Manufacturer part # 37927 - Revolutionary new concept in aftermarket H-D steel-braided brake lines. One-piece upper lines feature brazed-on fittings that screw into the junction block at one end and the master cylinder at the other. Lines feature Magnum's Sterling Chromite II finish; fittings are polished chrome. Now it's easier to make brake line changes when installing new handlebars since you only have to replace the upper line. Upper lines are available in 11 in. - 39 in. lengths with 90 degree, 35 degree or straight upper banjo fittings, ensuring a clean, custom look in any application. Meet DOT MVSS-106 specifications. Made in the U.S.A., , Included Items: , (1) Brake line 27 in. with one 7/16 in. 35-degree banjo and one 3/8 in.-24 female inverted flare, (2) 7/16 in. Crush washers , , NOTE: Upper and lower lines must be purchased separately (see below for Part No.), , Lower Brake Line Assemlies FXST/I/C, FXSTB/I, FXSTD/I 1984-2008; FXDWG 1993-2005 with single disc - Part No. H19971 FLHR/C/I, FLHT, FLHTC/I, FLHTCU/I, FLTR/I 1994-2007 with dual disc - Part No. H19975 FLST/C/I, FLSTF/I, FLSTN 1987-2008 with single disc - Part No. H19972 FXD 1995-2008; FXDL 2001-2007; XL/H 883/C/Dlx/Hugger, XL/H 1200/C 1987-2003 with single disc - Part No. H19973 FXDX, FXDXT 1998-2005; FXDL 1993-1999; XL 1200S 1996-2003; XL 883R 2002-2003 with dual disc - Part No. H19974 XL 883/L/C, 1200C 2004-2008 with single disc - Part No. 199151. 37927 1 on hand More Info/Options for Magnum 7/16", 35 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line 37927

$49.99 K & N Factory-Style Washable/High Flow Air Filter YA-6090 $49.99 Manufacturer: K & N Dennis Kirk Part #: 303806 K & N Factory-Style Washable/High Flow Air Filter: Manufacturer part # YA-6090 - Non-restricting and free-flowing. Minimal service required. Unaffected by moisture. , NOTE: All K&N air filters must be treated with K&N filter oil prior to installation. YA-6090 1 on hand More Info/Options for K & N Factory-Style Washable/High Flow Air Filter YA-6090

$49.99 Winderosa Engine Full Top Gasket Set/2 Cylinder 710200 $49.99 Manufacturer: Winderosa Dennis Kirk Part #: 261242 Winderosa Engine Full Top Gasket Set/2 Cylinder: Manufacturer part # 710200 - Full top sets include head, base, intake, reed, exhaust and water manifold gaskets necessary for a top end overhaul.. 710200 1 on hand More Info/Options for Winderosa Engine Full Top Gasket Set/2 Cylinder 710200

$49.99 Sunstar Sprocket 2563542 $49.99 Manufacturer: Sunstar Dennis Kirk Part #: 80554042S Sunstar Sprocket: Manufacturer part # 2563542 - High quality, all steel sprockets meet the demands of todays highest horsepower machines. Powerdrive countershaft (front) sprockets are manufactured from case-hardened chromoly steel for the ultimate in strength and durability. They also receive a parkerizing surface treatment for rust and corrosion resistance. Sunstar steel rear sprockets are manufactured from the highest quality 1045 high-carbon steel, and most are heat treated for added strength and wear resistance. Computer designed weight reduction holes are included where possible. Most rear sprockets are zinc plated, and some have a baked-on durable paint for corrosion resistance. Many conversions are available from unpopular 632 and 532 sizes to 630 and 530 sizes for better chain selection, as well as other lighter-weight options for racing. Any time you use other than the standard front/rear sprocket sizes, clearance must be checked. When converting to a smaller chain size, especially for racing, be sure to use the highest grade 0-ring chain available (non-O-ring heavy-duty acceptable for drag racing).. 2563542 1 on hand More Info/Options for Sunstar Sprocket 2563542

$49.99 K & N Factory-Style Filter Element HA-7598 $49.99 Manufacturer: K & N Dennis Kirk Part #: 303636 K & N Factory-Style Filter Element: Manufacturer part # HA-7598 - NON-RESTRICTIVE - dust and dirt will not clog the filter because they remain on the outside of the element. FREE-FLOWING - despite the outer layer of trapped dust and dirt, air flow between the particles remains virtually unaffected. MOISTURE-RESISTANT - moisture will not clog the oil-saturated element, even completely wet, the filter will allow the engine to breathe freely. MINIMAL-SERVICE - because dirt particles that build up on the outside of the element actually aid in the filtering action, frequent cleaning is not required. Unaffected by pollution control devices - oil breather blow-by is absorbed in the fabric without effect. All K & N air filters must be treated with filter oil before installation.. HA-7598 1 on hand More Info/Options for K & N Factory-Style Filter Element HA-7598

$49.99 K & N Factory-Style Filter Element KA-1088 $49.99 Manufacturer: K & N Dennis Kirk Part #: 303664 K & N Factory-Style Filter Element: Manufacturer part # KA-1088 - NON-RESTRICTIVE - dust and dirt will not clog the filter because they remain on the outside of the element. FREE-FLOWING - despite the outer layer of trapped dust and dirt, air flow between the particles remains virtually unaffected. MOISTURE-RESISTANT - moisture will not clog the oil-saturated element, even completely wet, the filter will allow the engine to breathe freely. MINIMAL-SERVICE - because dirt particles that build up on the outside of the element actually aid in the filtering action, frequent cleaning is not required. Unaffected by pollution control devices - oil breather blow-by is absorbed in the fabric without effect. All K & N air filters must be treated with filter oil before installation.. KA-1088 1 on hand More Info/Options for K & N Factory-Style Filter Element KA-1088

$49.99 K & N Factory-Style Filter Element KA-8077 $49.99 Manufacturer: K & N Dennis Kirk Part #: 30359 K & N Factory-Style Filter Element: Manufacturer part # KA-8077 - NON-RESTRICTIVE - dust and dirt will not clog the filter because they remain on the outside of the element. FREE-FLOWING - despite the outer layer of trapped dust and dirt, air flow between the particles remains virtually unaffected. MOISTURE-RESISTANT - moisture will not clog the oil-saturated element, even completely wet, the filter will allow the engine to breathe freely. MINIMAL-SERVICE - because dirt particles that build up on the outside of the element actually aid in the filtering action, frequent cleaning is not required. Unaffected by pollution control devices - oil breather blow-by is absorbed in the fabric without effect. All K & N air filters must be treated with filter oil before installation.. KA-8077 1 on hand More Info/Options for K & N Factory-Style Filter Element KA-8077

$49.99 Woodys Dooly Carbide 4 in. Wear Rod DS4-9350 $49.99 Manufacturer: Woodys Dennis Kirk Part #: 032058 Woodys Dooly Carbide 4 in. Wear Rod: Manufacturer part # DS4-9350 - A revolutionary new product that virtually eliminates ski darting. With two carbide wear rods per ski, the Dooly wear rod creates two solid traction lines for straight steering and enhanced handling. Each wear rod features two 7/16 in. runners with your choice of 4 in., 6 in. or 8 in. of center turning carbide. 4 in. carbide is 90°; 6 in. and 8 in. carbide is 60°. Front of wear rod has hard weld; back has 1 1/2 carbide pad. Durable 3/8 in.-16 mounting studs ensure secure fit. NOTE: These carbides are sold individually-order 2 per snowmobile. DS4-9350 1 on hand More Info/Options for Woodys Dooly Carbide 4 in. Wear Rod DS4-9350

$49.99 DID Cam Chain p11927182 11926990 $49.99 Manufacturer: DID Dennis Kirk Part #: 11926990 DID Cam Chain: Manufacturer part # p11927182 - DennisKirk Part # 11926990 - This is a roller chain.. p11927182 1 on hand More Info/Options for DID Cam Chain p11927182 11926990

$49.99 Joe Rocket Gold Wing Polo Shirt 0871-7004 $49.99 Manufacturer: Joe Rocket Dennis Kirk Part #: 3411086L Joe Rocket Gold Wing Polo Shirt: Manufacturer part # 0871-7004 - Micro poly/span blend. Flat screened logos.. 0871-7004 3 on hand More Info/Options for Joe Rocket Gold Wing Polo Shirt 0871-7004

$49.99 UFO Honda Radiator Shrouds HO03634041 $49.99 Manufacturer: UFO Dennis Kirk Part #: 616370 UFO Honda Radiator Shrouds: Manufacturer part # HO03634041 - Plastic is color-matched to stock or in optional works colors. Pieces are already drilled and can be mounted easily to stock locations. Made in Italy.. HO03634041 3 on hand More Info/Options for UFO Honda Radiator Shrouds HO03634041